N86 problem....PLZZZZ HELP!!!!

i have bought this new nokia n86 8mp in jan and have been dealing with problems since then....first of all the colours of the phone crashed and the screen was replaced in 15 days from the date of purchase.,,,,then the colours again crashed and the phone was being replaced just a few days ago.......
One thing more i want to know how i could change the phone settings as the phone keeps on using the gprs.....i have to manually disconnect the access point from the active connections...
somebody plzzzz help me to get rid of this problem

go to settings..>connection..>destinations..>options..>default connection..>Always Ask........when the connection is required then the phone asks for a permission and a message will appear so you will have to choose the right connection
Nokia 5730XM,200.12.87
If my post helped you in anyway,Please click on the (Kudos!) Star, THANK YOU!!

Similar Messages

My ac adapter problem (plzzzz help)

I use my ibook g4 all the time for college work and for general use.
Just recently I tripped on the ac adapter cable it came right out and then the ibook itself fell to the floor (from my bed) and landed on the dc side.
it didnt look that bad until I looked and the "male" part of the ac adapter and it has split slightly, i did the best i can to make the rim of the adapter circular again but everytime I put the adapter inside my ibook it does nothing but the green light and doesn't charge...
I think the tip of the "male" part of the adapter went inside the dc (female) part of my ibook but im not sure..
I just really need to know what I will have to do to get my ibook working again because now it wont charge and it has all my work on it so please please help me out anyway you can any help will be much appreciated, thanks.
ibook Mac OS X (10.4.3)

Hi Yeah,
Welcome to Apple Discussions
I usually focus on new topics in Using iBook G4 and not the others. I miss the recent posts box because then I could answer from all categories. Anyways you need to be careful with the DC-in board "female" plug. The same thing happened to my G3 iBook, which was a real bummer. What can happen is the DC-in board's plug can shift inside of the case. Eventually it may malfunction because of the shifting, which means you can't power your computer anymore. The thing to watch out for is with the new adapter's "male" plug doesn't start to split like the last one. This means that you have to probably/eventually replace the DC-in Board. If you can't charge your iBook, bring it to an Apple Store and have a Mac genius take a look. What they told me was that they wanted to replace the whole logic board instead of the DC-in Board ($750+). I guessed it would end up like that so I replaced it myself. Here is a guide on how to do it, just incase all else fails. Also at PBFixit.com you can get parts for you iBook. The DC-in Board is pretty cheap.
I hope that helps,
Jon
PS For future reference, you can get a power adapter Here

Deployment problem plzzzz help

hi guys ,when i try to deploy my web app on sun creator i got this error "Application is already deployed on other targets plz use create application ref command to create ref to the specified target" what does this mean and how can i use ref command ,also i tried to restart the server and check if it was deployed and when i try to open the prj i got this "A "com.sun.enterprise.tools.guiframework.exception.FrameworkException" was caught. The message from the exception: "Unabled to handle pre-compiled JSP '/jsp/webApplicationsEdit.jsp'. Expected pre-compiled classname: 'org.apache.jsp.jsp.webApplicationsEdit_jsp'."
The root cause is "com.sun.enterprise.admin.common.exception.MBeanConfigException: Component not registered"
what does this mean and where does the error come from plz guys tell me what to do,
thx

Hi,
You might have exit the ide without closing the project. If you had run the application before successfully, it may be a run time problem. You can delete .Creator in user folder and rebuild project and run it. If it does not load properly check further errors if any.
dr.am mohan rao

Server error problems plzzzz help

hi guys i was workin fine and deploying my proj and when i close sun enterprise and open it again to do another prj i got this erroro when running the prj said that
Unknown master password(use asadmin change-master password command with sermaster password=true) )
-port conflicts(possible port number could be possibly used by the os
-corrupted deployed applications [reventing the server to start)
at the same time when i open the log file i don`t understand the error as am new beginner so plz tell me what to do when i open this file and how to get it fixed
thx guys

Can you post the portions of the server log that relate to this error (which may have some stacktraces useful for diagnosing).
One thing you may want to try is to run the ide with a fresh userdir:
http://blogs.sun.com/karthikr/entry/jse_directories
Based on the error messages, it looks like there is a port conflict. You can try changing the server port via runtime-tab | select server | right-click and select properties.

HT2573 I am using macbook pro with update of 10.7.5...I am not able to authorize my digital signature. It is showing crypto service provider is missing. I am in a big problem. plzzz help me out....thanx

I am using a mac book pro version 10.7.5..I am not able to authorize my digital signature.It is showing crypto service provider is missing. I am in a big problem . plzzzz help me out. Thanks

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Critical problem plz help!!

hey,
my n95 was working fine,yesterday it starts to restart by itself and wen my n95 turns on it restarts again.....so i formatted my n95 but when i was installing the software my phone turned off....and now my n95 is just a black screen with a backlight....plzzzz help!

Try the hard reset code, which will wipe all of your data and installed apps. If it fails to solve the problem then only a nokia care point can help you.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

IPod Mini Problems Please Help

This is my second post of the type... no one replied to that so im hoping someone could help me.
Problems:
-Wont Update or Load Songs
-It starts loading, gets to around the 5th song (out of well over 600) and says "Ipod Update Complete, OK To Disconnect" though nothing is on the iPod.
-Occasionally wont restore to factory settings.
Okay, before you suggest the five R's, ill note that ive put several MONTHS into this, and ive tried them well over 20 times in order.
Things Tried
-5 R's Repeatedly (as noted above)
-updating on a friends computer (several times with no luck, same problems)
-requested help over the phone
-The number i called was the Apple US Help Line, which the person helped me for about an hour before he said he did not know what was up, and transfered me to the Canadian help line, where they demanded a large sum for help, which i could not pay (under 18).
-When i first noticed the problems, I sent it in (around the end of december)and problems continued upon arrival of the new mini.
I will also note that my sisters iPod Nano works perfectly fine, no problems, as well as my friends iPods adding songs from my computer.
Please please help... im currently resorting to a crappy CD player that skips for my music... and have been... its starting to break me inside.
Thank you,
Milan

Natalie,
If you have your iPod set to transfer your music manually, then that do not disconnect message will continue to be displayed on your iPod until you manually eject it.
You can do this by clicking on the little eject icon next to the iPod listing in the source window of iTunes, or right click on it and select eject. Another way would be to use the safely remove hardware icon in the system tray next to the clock (looks like a grey rectangle with a green arrow above it). Click on this then select your iPod. Or through Windows, select start/my computer, right click on the iPod, select eject.
If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked enable disk use, remove it and your iPod should automatically disconnect after its finished transferring music.
For the iPod to automatically open iTunes, you have to have "open iTunes when this iPod is attached" checked.
Go to edit/preferences/iPod to do this.
If you prefer to keep the iPod set to manual transfer, look at this. In fact, the whole tutorial is a must read.
Managing Your Songs Manually
iPod Tutorial
iTunes Tutorial Windows

Apps store wont let me download free app due to previous purchasing problem? help!!

apps store wont let me download free app due to previous purchasing problem? help!!

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill ? If it's not then that might be the reason that you are getting the security code error : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

I am trying to send minutes of a meeting to pc users by clicking on export and choosing the word option. Recipients are unable to open them saying they came as a ZIP compressed folder. No idea what that is or how to correct the problem. Help!

I am trying to send minutes of a meeting created in Pages to pc users by clicking on export then word. Recipients are telling me they cannot open the minutes which have come as a ZIP compressed folder. I have no idea what this is or how to fix the problem. Help?!

A pc user can open a .zip file by double clicking it.
If that does not work, you can convert the document to a .pdf by doing the following.
With the document active, type commannd + P (the print command).
In the next screen, on the bottom left, click on PDF, and in the drop down select Save as pdf...
You will be asked where the .pdf should be saved - the desktop is the easiest.
Now when you want to send the minutes, you have them as a .pdf file. Anyone with Adobe Acrobat Reder can open this.

Report problem plz help

hi to all
Using form6i and run in client server. i cant solve this problem please help to all master :
I have a text item in forms and button. When i type the Customer_Name in text item then all names appears in reports, i want that when i type the name, only that name will appear .
Please check what is wrong with my code and steps.
In report wizard, query statement i put "Select * from S_customer"
then i call the report in forms..
Report Property pallette:
Other Parameters=Customer_Name
Query names=Select * from s_Customer where Customer_Name=:rep(the text item)
then in forms the button trigger is when button pressed.below is the code:
declare
v_Rep varchar2(100);
repid report_object;
Begin
repid := find_report_object('report');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,’s_customer=’||:Dept.rep);
v_rep := run_report_object(repid);
end;
advance tnx to all

Hi,
You need to bulid a parameter list.
This is a code sample to run a report from Forms:
(Place it on a button when-button-pressed trigger, to run the report).
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     rep_status VARCHAR2(20);
-- this is the parameter list
     pl_id ParamList;
pl_name VARCHAR2(10) := 'tempdata';
BEGIN
-- try to find the parameter list
pl_id := Get_Parameter_List(pl_name);
          IF Id_Null(pl_id) THEN
               -- if parameter lsit does not exist
               -- create it
          pl_id := Create_Parameter_List(pl_name);
          IF Id_Null(pl_id) THEN
          Message('Error creating parameter list '||pl_name);
          RAISE Form_Trigger_Failure;
          END IF;
          ELSE
          Message('Parameter list '||pl_name||' already exists!');
          -- destroy it to clear old parameters
          -- and create it again;
          destroy_parameter_list(pl_id);
          pl_id := Create_Parameter_List(pl_name);
          END IF;
Add_Parameter(pl_id,'p_customer_name',TEXT_PARAMETER,:customer.cust_name);
-- add as many parameters as needed
-- finally run the report passing your parameter list
     repid := FIND_REPORT_OBJECT('report4');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
               Exception
                    when others then
                    Message('Error running report. '||sqlerrm, acknowledge);
END;
Also, you need to create the parameter in your report:
1.- Open your report on reports builder.
2.- Find the "Data Model" node, and the "User parameters" node.
3.- Create a parameter: p_customer_name
4.- Modify your sql from:
Select * from S_customer
TO:
Select * from S_customer
where Customer_Name=:p_customer_name;
If you want this parameter to be optional, check the reports online help on "Lexical References".
Have fun,
Hugo

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Hi my iphone 4 is disabled how can solve this problem? help me please

hi my iphone 4 is disabled how can solve this problem? help me please

What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

N86 problem....PLZZZZ HELP!!!!

Similar Messages

Maybe you are looking for