N86 Web problems can't scroll down

I am hoping someone might be able to help me. I have an N86 and just upgraded the firmware to the newest release. I am having a problem with the web. It will not allow me to scroll down past a text input box. For example I tried to go to T-mobile.com and I can scroll down to the search box part of the page but can not get past that part whether or not I enter a search word. The cursor gets stuck in the search box even though I did not click on it to enter a search word. It was the same before updating the firmware. Anyone have any ideas? Does anyone also know if it's possible for me to get the web program from my N96 and install it on my N86? The N96 web is so much better than the N86's. The N96's web browser gives you the option to shrink the entire page or to zoom in on the page. It also has autofind for phone numbers, email addresses etc. The N86's web doesn't have anything like that, it's horrible.

Here's an option before taking your bb apart.  Squirt some Windex on a paper towel. Not much, say less than your thumbprint. Wrap it around your thumb.  Scroll left, right, up and down for 30 seconds or so each direction.  The cleaner coats the trackball .... the friction cleans the underlying elements.  Hey, I'm not joking. Worked for me.  Patent pending.  (NOW, I'm joking!)  Hope this helps someone.

Similar Messages

  • When I load Safari on my IPAD2, the web page comes up, but I can't scroll down the page. No matter what web page I go to the content stays darker than the navigation bar. This just started today. All other applications work fine.

    When I bring up Safari on my IPAD2, the web page comes up, but I can't scroll down the page. This just started today. No matter what web site I go to, the content is darker than the navigation pane.

    If it's happening on all sites, then assuming that it's Safari that you're using, have you tried clearing it's cache : Settings > Safari > Clear Cache (other browsers should have similar options, possibly within the actual app instead of within Settings). You could also try closing the app completely : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app (or whichever browser you're using) to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If it's only happening on a particular site then there may be content on that site that isn't supported on the iPad e.g. flash, java, silverlight

  • All web pages appear with a blinking cursor like in a "word document". i can't scroll down or up using the buttons of my key board. i have to pull down the scroll bar. something in settings has changed. how to correct it??

    all web pages appear with a blinking cursor like in a "word document". i can't scroll down or up using the buttons of my key board. i have to pull down the scroll bar. something in settings has changed. how to correct it??
    == This happened ==
    Just once or twice
    == 2 days ago.

    See also this article about caret browsing: http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    In Firefox 3.6 and later versions you can disable the F7 shortcut that toggles caret browsing by setting the pref accessibility.browsewithcaret_shortcut.enabled to false.
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

  • My cursor isn't working on Firefox so I can't scroll down - I must manually hold vertical bar to move page - I've already tried troubleshooting - helped temporarily, but still problem now - cursor otherwise works on other servers

    My cursor isn't working on Firefox, so I can't scroll down - I must manually hold the vertical bar to move page.

    I have had this nagging problem several times. Each time more frustrating than the last.
    '''PDF''''s. If you have a .pdf page open in Firefox (as often happens when looking at brochures and whatnot from websites) the mousepad side scroll function will not work. Plugging in an external usb device works just fine, making the situation that much more aggravating.
    Simply close any windows or tabs from Firefox that are displaying .pdf's, and the blood pressure "should" return to normal values. If your blood pressure doesn't return to a satisfactory value, see your family doctor. He'll probably ensure your continued trust in Firefox is still better than any experience with explor.er.

  • I can't scroll down the profile page on Facebook app

    I can't scroll down the profile page on Facebook app, resetting the phone by pressing down the home and sleep buttons for 15 seconds to reset the phone didn't work, deleting and re-installing the app didn't solve it either, is there any solution to the problem? Thanks!

    Tap Settings / General / Reset / Reset Network Settings.
    Restart your iPhone.
    Hold down the sleep / wake button until you see the red slider then swipe to power off. Then hold down the sleep / wake button until you see the Apple logo.
    I realize you are using the FB app but try deleting cookies.
    Tap Settings / Safari.
    Clear Cookies
    Try again.

  • ITunes 10.4.1.10 how to stop downloads of free news pods?  (right click delete doesn't work) also can't scroll down list of downloads!

    (ITunes 10.4.1.10) How to stop downloads of free news pods?  (right click delete doesn't work)
    Also can't scroll down list of downloads so as to pause them.  Would like to delete them as ISP has download limit.
    Thanks in advance!  (this seems to be a dumb problem of the software having a life of its own!)

    I have been talking to Apple support about this very problem. So far they have asked me to disable both Firewall and Anti Virus software (Windows Firewall and ESAT NOD32 anti virus) - this didn't work. Rebuild my library - this didn't work. Un-install all Apple applications and re-install - this didn't work. I have created a second user account on my PC and from that account (both accounts set as Administrator) I can activate Genius. This suggests to me that the problem is possibly linked to my original User Account, which is the one I always use. I am waiting for the next update from Apple and will post an update if/when the problem is resolved.
    What I also notice is about 2 seconds in to Step 2 of the Genius activation, the progress diagonal lines bar stops, and then starts again. As soon as I see this short freeze I know that the activation will fail.

  • I can't scroll down to read my ebook. I have to change pdf view after pressing pg dn to view the next page. Please help!

    I can't scroll down to read my ebook. I have to change pdf view after pressing pg dn to view the next page. Please help!

    Sorted out the problem myself - secret is you have to go to Full Screen view to be able to scroll down. Easy as that - but not so apparent if you are new to this.

  • I can't scroll down to see older posts in facebook, any ideas?

    I can't scroll down for older postings in facebook on my I phone 4 but my husband & daughter also have this phone & their's works perfectly, any ideas?

    Have you tried turning your phone off and on again and seeing if that fixes the problem.
    If you still have the problem delete the Facebook app and loaded it back on your phone. This will delete any data associated with the app.

  • Can't scroll down in iPhone 'summary'?

    In iTunes, most recent version, just updated iPhone 4 to 5.1.1, and I'm in the summary section of my phone in iTunes, but I can't scroll down? There is no scrolly bar on the right, and everytime I press the down arrow after clicking in the screen area, it just goes down to the next section of my iPhone (Music). Please help! I need to check the manually manage music box because I hate anything that involves syncing. Thankyou so much in advance.

    Found the solution, to anyone else having this problem, just use two fingers on your trackpad downwards, and the scroll will appear.

  • My grandson turned on assisted touch and now he has to click on everything three times to open it and he can't scroll down in his settings app.

    My grandson turned on assisted touch and now he has to click on everything three times to open it and he can't scroll down in his settings app.

    Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
    Try the triple-click Home button. If necessary, use three fingers to scroll to turn AT off.

  • Can't scroll down

    We just had our iMac operating system upgraded to version 11. Now we can't scroll down on any site. Help!

    Scrolling up is down and scrolling down is up. Settings > Mouse > and change the scrolling direction.

  • I accidently turned voice over on,I've tried triple clicking the home button to bring up voice over options but doesn't work. I can't scroll down to get to Accesibility in genereal even with three fingers.

    I accidently turned voice over on,I've tried triple clicking the home button to bring up voice over options but doesn't work. I can't scroll down to get to Accesibility in genereal even with three fingers.

    This article can show you how to disable it through iTunes on a PC/Mac:
    iOS: Configuring accessibility features

  • I can't scroll down in the apps section,

    For some reason I can't scroll down in apps on iPad via iTunes

    this is KILLING me also..i go to my apps section in itunes in order to add pdf, comics, or pull ringtones or whatever I need to do..the area that you can add files or remove files that apps use. ITS NOT letting me scroll down to it. ONLY 1 TIME did it fix after transfering purchases and backing up..just to make sure it was on the same playing field...but the next time i reconnected, doing that didnt change anything..
    did you find an answer yet?
    i know its the same day as your issue...strange.
    ive been dealing with it for a few days and finally decided to post.

  • I turn on speech to text but Ayer I can not scroll down in general setting to turn it off. How can I scroll down

    I can not scroll down to turn of the speech to text. How can I turn it off when I can not scroll down the menu in general setting. It seem everything is locked. Thank you.

    If you are referring to VoiceOver, you need to scroll using three fingers.

  • Trouble on the Mailboxes screen - can't scroll down or rearrange

    Hello,
    When I add more than two email accounts, it becomes necessary to scroll past the list of inboxes to access messages through the "Accounts" section (screenshot: http://twitpic.com/3vm0sw). However, I can't scroll down. When I try, the screen just bounces back up to where it started.
    Being able to rearrange the Mailboxes screen (removing individual inboxes or putting the "Accounts" section on top) would help, but I can't find a way to do that, either.
    I want to access my email from the "Accounts" section because it appears to be the only way to view emails that are in folders (or gmail labels).
    Can anyone help?
    Thanks very much!!
    Mindy

    When I got my first iPhone a couple years ago, being a smartphone user I thought it would be similar, but it is very different, the iPhone is a very unique device. One that I love and even though there are some "interesting roadblocks' I would not trade it in for any other phone on the market.
    I hope you enjoy your iPhone and find it as fun and enjoyable as I find mine!

Maybe you are looking for

  • Unable to restore from  Overland Tape library to STK 5320

    Hi, The Details are... STK 5320 (1.0.215.199) WindowXP System where the volume of the STK 5320 is maped (1.0.0.185) When restoreing a tape from Overland tape library using baracuda to STK 5320 maped volume we are getting the following log on the STK

  • How to call an eCATT programmatically with import parameters

    Hi there, I am using function module ECATT_EXECUTE to call test scripts from within ABAP test code, like below. Unfortunately, I am not able to pass my actual import parameter values. It seems that the interface does not provide a way to pass import

  • Oracle Apps Customizing Forms

    How do I set the update allowed property of a descr flexfield column based on a condition. Am trying to modify an existing form.

  • Web Clip with Parameters

    I have a page that I would like to webclip. Problem is, the page contains parameters. For the classic example Lets say I have developed a page using php that will list employees belonging to a certain department. The web page would look something lik

  • What VLAN should the management interface be in on a 4400 controller?

    Hi, Some documentations put the management interface on a 4400 controller into a regular tagged VLAN. But some documentations put it in an untagged Native VLAN, the tag=0. What is the difference? Which configuration is optimal? Thanks, Justin