N9 AFTER FIRMWARE PR1.1 UPDATE

Hi guys, would anyone of you out there want to share with me your experience after your N9 has been updated with PR1.1? (As of now PR1.1 is still not available in Malaysia) Like is it now a better phone than before? I'm still emotionally attached with this phone even though I have sold mine just before the PR1.1 was released. Guess I pulled the trigger prematurely. My biggest complain is the small default Font size & I have been told that with the PR1.1 update the Font size is somewhat bigger now. Blame it on my aging eyes - LOL! I'm seriously contemplating getting another N9. The hardware is just awesome & out of this world. Cheers mate & hope to hear from you guys soon.

I will have to second overlord above on this one. I have set uo two mail accounts which works just as it should.
I have noticed that the phone multitasks better and that my wifi signal and performance has improved - not much but enough.
For some reason I believe that the volume on ringtone has gotten a bit louder with PR.1.1 along with volume during call, but it might not be at all.
All in all very happy with the update and looking forward to the next one. Meantime I will enjoy this piece of perfection

Similar Messages

Safari 3.1 doesn't work after Firmware 1.5 update

Hi. After downloading the Firmware 1.5 update, I can't use Safari 3.1 anymore. I am able to connect on-line (e.g., I can search successfully for updates), but I cannot web-browse. I reloaded my ISP software, and that is not the problem. I also have cleared the cache on Safari and that didn't help either. Please help. Thank you!

Ewen wrote:
If you were actually right don't you think that Apple would put a proviso on every software update to repair permissions before and after install in their release note? Or perhaps even automate the process for OSX user as part of install process?
Do you Verify your disk occasionally? Apple could automate that as part of chron scripts, but they don't. In fact, the chron scripts themselves only run if you leave your machine active overnight. There are plenty of things that Apple could do, but doesn't. Why? Only they know.
But, the OP has an app that is not opening, and DU help states: "If you have trouble opening applications or documents, or if your computer is running slowly, the user permissions for some of your files may be set incorrectly. Permission problems sometimes happen after you update your system or install new software. With Disk Utility, you can repair these problems."
Ewen wrote:
That's another matter, but you didn't actually suggest it first in topic. OP can easily test this by Verify permissions. Repair permissions probably won't hurt but I'd hate for a Mac user to start performing a troubleshooting step with little or no logical reasoning behind it.
No, why would I? S.U. suggested it, and the OP asked how to do it.
Ewen wrote:
so if you answer every question with this as a suggested course of advice you will be right some of the time, but not all of the time.
Yes, and we all know a broken analog clock is accurate twice per day. But I don't advise this all of the time, most of the time, or even some of the time. Rarely would probably be the best descriptor.
Ewen wrote:
I think its just a waste of time unless actually a permissions issue may be present. Permissions issues do crop up (and may explain OP issue) so if you answer every question with this as a suggested course of advice you will be right some of the time, but not all of the time.
I would argue that Verify Permissions is a waste of time, since if incorrect permissions are found, the next step is to Repair Permissions, right? So why not just Repair? You imply that somehow that Repair Permissions step will have negative consequences. What is your evidence for that?
Ewen wrote:
I think its just a waste of time
If the only negative consequence to Repair Permissions is that it's "a waste of time," honestly, what's the harm? I think that anyone who has followed this thread down to this point now has a very good understanding of what "waste of time" really means!

MB won't run from battery after firmware 1.1 update

I know this post is similar to many others on this forum, but I have scoured the other entries and can't find one with my exact problem (or a solution). Sorry if this is a repeat.
My MB has worked fine since I bought it in July. After I installed the MacBook SMC Firmware Update v1.1, however, it randomly decided one day not to run off of the battery anymore. If I plug in the AC adapter, it will boot, run fine, and charge the battery (the menu indicates a 100% charge), but as soon as I unplug the AC adapter the entire system shuts off.
The problem is that I am living in China through July. After working at Apple for nearly 4 years, I was wise enough to purchase AppleCare ... but I can't exactly just hop in the car and take the machine to an Apple Store. Is there a solution for me? Because I'm traveling throughout China, my machine is essentially useless if it has to be plugged in. I'm going to be very upset if an Apple-recommended firmware update rendered my machine unusable.
All applications are up-to-date (OS 10.4.8, Build 8L2127, 2ghz Duo with 1gb RAM).
MacBook Mac OS X (10.4.8)

I have a the same problem, at the Apple genious bar a different battery did not work, so they sent my computer in to the subcontractors in Memphis. They kept it less than 10 hours and sent it back with a new battery. The new battery worked for about one month. The funny thing is I am not getting an x on my battery icon anymore. Coconut battery says it is a good battery and is fully charged. I calibrated the battery the first thing when I got the unit back. The system profiler says the battery is present and charged, if the battery should go down just from sitting still, the power adapter will recharge the battery. But, The computer will not run on the battery. If the power adapter is unplugged, which happens about 50 times a day because of the magnetic attachment, the machine turns off. I too developed the probem only after downloading the firmware update that apple said I needed. It is clear from these posts that there is a problem between the motherboard and the battery, and maybe a problem with the battery's calibration software. Judging from the varied responses users have gotten from Apple, and the complete silence about the problem on the Apple support site, it is also clear that Apple either doesn't know what the problem is and therefore can't fix it, or Apple is trying to turn a blind eye to the problem hoping it will go away. These posts have been viewed over 100,000 times, this is not a small problem!

Can't get email after Firmware 2.0 update

I updated to 2.0 and my email worked for the first day.
Now neither my Roadrunner email or my gmail account can get mail on my iPhone.
The mail program runs and never stops spinning, just times out.
Any suggestions?

We have three Original iPhone's and the same thing happened to all of our phones. Email will download a few times and then we just get the "spinning wheel". If we turn off the phone and restart it, email will download. After the initial download it may work for a few seconds to an hour and then stops working. Basically we have to restart our phones every time we want to check/download email. Also experiencing tremendous battery drain with 2.0 - not sure why? I would go back to the old firmware if I could and wait it out. Not happy at all - looking for 2.0.1???

MBP very hot after firmware 1.5 update

Hi.
Anybody else had this issue ?
I think it started after i updated the firmware on my MBP 2.4Ghz to v1.5
Now idle temp is around 62c all the time and the fans starts to run very fast
only with little activity.
I did check if anything was running the CPU 100% "Activity manager"
Nothing. CPU 3% with 5 apps running. And i also ran the Diagnostic disc (AHT)
Before the 1.5 update i never heard the fans really but now they starts
a lot more often and that means the heat went up (Ofcause)
Anything to do ? I want it back to the old behavior much more quiet and nice.
Not to speak about in the long run. It will last longer that way i´m sure.
Would love to hear if anybody have some ideas.

Crazy. All this started after a stupid firmware update. I mean. How stupid is that.
My MBP 2.4Ghz was clean silence and not this hot. Its from Feb 2008.
After the 1.5 firmware it got hotter for sure.
Mine is lifted 10cm over the table and still very hot idle.
CPU temp 62c
CPU core 1 & 2 is 63c-64c
And this is only idle ! before it was a lot cooler.
I remember i never heard the fans and thats why i found out something was wrong.
Now i hear the fans with only small things like browsing with safari and burn a DVD.
Check here.
http://www.intelmactemp.com/list?vmodel=32&v_cpufreq=&v_memory=&v_hddsize=&v_hddrpm=&v_serial=&v_macosxver=&v_ambi ent_1=&v_ambient_2=&v_idleoem_1=&v_idleoem_2=&v_loadoem_1=&v_loadoem_2=&v_hddtem p_1=&v_hddtemp_2=&v_whine=&v_moo=&vpostedby=
My model should be between 45c - 52c that would be more normal for my 2.4ghz model.
Could i go to Apple and get a new computer with this issue ? would that be enough ?

Mifi4510L connections issues after firmware 2.23 update

Just updated my mifi firmware to v2.23
Immediately upon restarting the unit it will no longer connect to Verizon's 3G/4G data network.
Checking the advanced diagnostics tool I found that the unit will not synch with the data network (no IP address) and will not connect when attempting manual connection.
Called tech support, after talking with 2 different reps my problem has been passed onto engineering with no estimated time of response.
Unfortunately the first rep tried to indicate that problem was related to my Macbook Pro. Tried to download the update using my XP virtual machine but the dowload pdf would not open.
Hopefully this issue will be resolved quickly before I have to request an adjustment to my MRC for the time that the unit is nonoperable.

Hello,
The problem is with your Mac. Many users have reported problems where the Mac upgrade left thier MiFi bricked. Follow JeffR's steps to resolve the problem on your own. Try to use a WinXP computer if at all possible.
If you have a Mac "bricked" Mifi:
1. Run the installer, the Mifi will show up as a USB Human Interface Device and the upgrade will not start (cannot find the device)
2. The installer leaves a directory (C:\MiFi4510L) and there's a program called DUU_Verizon_MiFi4510L.exe
3. Run that program, it will find the Mifi, and ask if you want to enable the modem functions of the Mifi.
4. Answer yes, then disconnect and hit the reset button under the battery door.
5. Now reattach to your PC, and rerun the upgrade program. This time it will work.
JeffR
http://community.vzw.com/t5/Broadband-Netbook-Devices/MiFi-4510L-Firmware-Update-2-23/m-p/719523#M7431

HDCP problems after firmware and thunderbolt update

I just finished installing the recent Macbook Pro EFI Firmware update (version 2.2) as well as the recent Thunderbolt Software Update (version 1.0).
I am now unable to play an HD movie that I purchased through iTunes on the screen of my Macbook Pro. I was watching this movie last night before updating my computer with no problems.
So...it seems likely that this is related to the updates.
Anyone else have this problem or know a solution?
Thanks!
-Jon

I shutdown and restarted my computer and this is no longer a problem.

MacBook Pro Won't Boot after Firmware Update

So I just upgraded to a MacBook Pro which came in the mail yesterday. I removed the Apple-installed HD and swapped it out for a bigger, faster HD. I installed OS X from scratch, imported everything from my Time Machine backup during the Setup Assistant, and then started installing updates. Everything was running swimmingly until the last updates.
What happened is when I rebooted my MacBook Pro and logged in after a series of updates, I got presented with both a Bluetooth update and a Firmware update at the same time. Both required a restart so I thought I would kill two birds with one stone. I installed the Bluetooth update, and then when it asked to reset I installed the Firmware update instead. However, the firmware update didn't behave as advertised because instead of shutting the MacBook Pro completely down, it restarted and then started installing the firmware update.
Ever since the firmware update (which I think installed correctly but don't know how to verify), I cannot boot my MacBook Pro. Using the OS X install DVD I can view my firmware version using System Profiler, and the number it is reporting is MBP53.00A.B03.
I have tried booting in verbose mode to try and get a feel for the problem, and it eventually hangs on an infinite loop saying something about not being able to find something on disk0s2.
I also thought I would fix the problem by doing an Archive and Install, but it quit at the very beginning of installing with the error "unknown error".
Also I thought I would format the disk with Disk Utility and then try installing again, but Disk Utility reports that it in unable to unmount the volume.
Any help you can provide would be greatly appreciated. Thanks!
-- Update --
Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
I think next I should try swapping out the new HD in my MacBook Pro with the one it originally came with. What do you think?

I, too, have a brand new MBP 15" that I put an Intel X25 in. At the 1.5 (Prior to Firmware Update) setting, it worked fine. I rant the Firmware Update, all looked fine, but the drive is no longer able to be seen.
Flash the PRAM, per other suggestions to no avail. Boot off of the DVD and disk utility nor Profiler sees the drive.
Replace the drive with the stock that came with the MBP (which I had never even used) and it works.
Put the Intel X25 into a Windows machine and it works fine. Reformatted it (in windows) and put it back into my MBP. Still not able to see it (from the Disk utility after booting off the DVD).
Intel's firmware for the drive says its up-to-date (new drive) and if I attempt to "re-run" the Mac Firmware Update, it says that the machine is already up-to-date.
Seems odd that it worked before an now it doesn't. Also seems odd that the X25 works in other machines. And that my MBP works just fine with the stock Hitachi 7200 320GB drive.
Ideas? Intel says to call Apple Support. Not sure what I can say to them.

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

N96-Problem in Camera after Firmware Update with 2...

Dear
I update my Nokia N96 firmware to 20.050 and i face problem in the Camera that after taking a photo the image processing page came then the phone hang up and restart.
i reinstall the firmware two times and same problem remain and i can't use the camera because of this problem.
the other functions like video and second camera still working.
i try many things like changing the place of storage, camera resoluation and still same problem.
the use same firmware files to update my fiend mobile N96 and he don't have this problem.
i don't know what the soluation actually i dont want to send it to the repair center as their soluation always to formate the mobile and i have many data i dont want to backup it.

Sorry mate but the next step after fiddling with the settings is a reset
Firstly try just a factory reset, if this doesn't work then back up and go for the full 3 finger

Recovered from disaster after firmware update 7.4.1

I have spent days trying to get connected to Airport Extreme Base station (two months old) after the last firmware update. I have seen many people with same or similar issues. The usual "doesn't detect wireless device" messages. I finally had some luck running from my clone drive using an older airport utility. At least I could get it to register the base station but only by using an additional ethernet patch cable to my laptop. Then it would allow me to adjust settings. Still things were not right. Connection was not good and I could not use the (802.11n(802.11b/802.11g compatible) settings at all. Sometimes I would get almost there and it would ask for my Network password and then say "connection timed out."
Then I found this post:
http://newtonpoetry.com/2008/08/18/airport-base-station-fix-revert-your-firmware /
Gave it a shot and everything is perfect now.
I reverted to older Airport Utility and older AE Base Station firmware
I downloaded and installed older airport utility 5.3.1, first deleting the old components:
/Applications/Utilities/Airport Utility
/System/Library/CoreServices/AirPort Base Station Agent
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
I had to delete the Agent while booted from another volume since system won't let you delete that. The older Airport utility installer may have replaced the newer one with the old one but I wanted to be sure.
Then I launched the old version of Airport Utility and followed directions, in the above url, to revert to the older firmware 7.3.1. Restarted laptop, opened Airport Utility and voila! Instant recognition. Changed a few settings including the (802.11n(802.11b/802.11g compatible) radio frequency and it all works flawlessly. Range is fantastic again. Very good speed.
I am not suggesting everyone revert to the older (less buggy?) updates but for me there was something very wrong especailly after Firmware 7.4.1. Hope Apple can make these more user friendly soon. I would love to know if anyone, or Apple, can tell me how to fix this issue using the latest updates. I tried every suggestion out there. Hard resets, restarting modem, turning off phones and other "interference", over and over with no luck.
That's my story, so far.
Rob D

Sorry... please disregard my previous question...
I've found out how to downgrade the firmware...
Of course!!! My connection is flying above 6Mbps again Whoa!!! I'm relieved...
For you folks who do want to find out how to downgrade:
1. Reboot the time capsule
2. Connect to it using the airport utility
3. Hold Control/Option key and click File > Check for Updates
4. Select the version you want to downgrade to, click Download
5. When down load completes, click Base Station > Upload Firmware
Select the version that you just downloaded and submit...
Wait about 5 minutes and it will restart... this restart takes little longer than usual... but it will come back.
Good luck all!!!

Lync 2010 Polycom CX600 phones fail to sign-in after firmware update

We're running the latest version of Lync2010 in our environment of approximately 1,500 Polycom CX600 phones across 5 Standard edition sites. After rolling out the latest firmware update 4.0.7577.4444 this weekend about 10% of the phones do not come back
online as the user they were previously signed as.The firmware was approved on a Friday evening and Monday morning we were still experiencing the issue.
The phone is stuck in the following error message:
"Sign-in Error
Cannot sign in. Please verify your sign-in address domain\username, and password and try again."
The phone did update to the latest version of firmware but is stuck in "limbo". Doing a traffic dump on the port it's connected to did not reveal anything as the phone is not attempting to communicate with any servers. Only a power
cycle (unplugging POE LAN port) makes the phone sign back in. Just to clarify, after the power cycle the phone signs back in on its own as it seems that it still stored the user's sign in information.
We connect to the voice network via LLDP and we have Alcatel-Lucent 6250 switches that these phones connect to. We also have the DHCP options for the phones to find our voice network for areas that do not have LLDP capable switches.
Just to recap, about 150 phones experienced this issue across all sites and we cannot narrow it down to anything specific about the environment. Performing a power cycle fixes this issue but it is extremely annoying.
Any suggestions?

Check the similar thread at
http://social.technet.microsoft.com/Forums/en-US/771ab6d9-908f-4545-b94f-ef51ab0cca60/polycom-cx600-cant-sign-in-after-firmware-upgrade?forum=lyncvoice
Try to move back to the previous version or you may need to reset each phone manually.
Lisa Zheng
TechNet Community Support

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

N9 AFTER FIRMWARE PR1.1 UPDATE

Similar Messages

Maybe you are looking for