N9 Can't autheticate through HTTPS via certificate
I have successfully imported the certificate my employer requires to access some of the company's internal websites. Made a setting, so that the certificate be used to authenticate me on websites.
However, I am unable to access the site in question from my N9 phone. Web server says, that no required ssl certificate was sent.
Don't know post #6 here makes any sense to you:http://talk.maemo.org/showthread.php?t=86763
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
SOAP Receiver with HTTPS(without certificate)
Hi experts
Receiver system not using any certificate. Without certificate How PI can send message through HTTPS using SOAP.
How to choose HTTPS transport protocol. (Here Target Url have Https://.....)
Here I am using PI7.1 EHP1.
I configured Receiver SOAP CC as
Transport protocol as HTTP
Taget Url https://api-demo.e-xact.com/transaction
It will work? if not how to enable Https in SOAP receiver
but I am getting below error In adapter
Adapter Framework caught exception: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
Thank you
SriniHi Srini,
The main reasons for this error "Peer certificate rejected..." be appearing are the following:
1. The correct server certificate could not be present in the TrustedCA keystore view of NWA. Please ensure you have done all the steps described in the URL below:
Security Configuration at Message Level
http://help.sap.com/saphelp_nwpi711/helpdata/EN/ea/c91141e109ef6fe10000000a1550b0/frameset.htm
2. The server certificate chain contains expired certificate. Check for it (that was the cause for other customers as well) and if it's the case renew it or extend the validation.
3. Some other customers have reported similar problem and mainly the problem was that the certificate chain was not in correct
order. Basically the server certificate chain should be in order Own->Intermedite->Root. To explain in detail, if your server certificate is A which is issued by an intermediate CA B and then B's certificate is issued by the C which is the root CA (having a self signed certificate).
Then your certificate chain contains 3 elements A->B->C. So you need to have the right order of certificate in the chain. If the order is B first followed by A followed by C, then the IAIK library used by PI cannot verify the server as trusted. Please generate the certificate in the right order and then import this certificate in the TrustedCA keystore view and try again. Please take this third steps as the principal one.
4. If the end point of the SOAP Call(Server) is configured to accept a client certificate(mandatory), then make sure that it is configured correctly in the SOAP channel and it is also within validity period.
(This certificate is the one which is sent to Server for Client authentication)
As a resource, you may need to create a new SSL Server key.
The requirement from SAP SSL client side is that the requested site has to have certificate with CN equal to the requested site. I mean if I request URL X then the CN must be CN=X.
In other words, the CN of the certificate has to be equal to the URL in the ftp request. This can be the IP address or the full name of the host.
Request the url with the IP of the SSL Server and the certificate to be with CN = IP of the server.
In any other case the SSL communication will not work.
Regards,
Caio -
The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
Help, please.Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep." -
THROUGH HTTP CAN WE SEND FLAT FILE IN PI7.3?
Hi Experts,
We have an requirement that Through HTTP can we send flat file in PI7.3.(For EX:source side HTTP and Target side is IDOC or PROXY)
Can any one please suggest me how can I proceed for that?
Please let me know if there is any Documents or Blogs are there related to above requirement...
Thanks,
ShaikHi Shaik,
You can try following approach might help.
Tell the sender system to use post method for HTTP connection. In post method the particular application will hit to a URL and data will be passed. Source system should pass the data same as that of Text file. Use following link which will help you to convert the data sent as text into XML. Further you can use this XML to convert further into IDOC or proxy.
Adapter User-Module for HTTP Adapter? -
Can we pass values to custom headers through HTTP bindings in BPEL?
hi,
I have an urgent requirement where I have to pass values to custom headers of HTTP url through HTTP bindings in bPEL.
Is it possible? Say I have a http url http://localhost:80/test.
I need to post xml over the above HTTP url as well pass some values to the Custom Headers Variables.
Can I achieve this functionality thorugh BPEL or not?Hi,
My requirement is exactly the same as yours, can you please let me know what did you do to overcome the Oracle Forms Default change password screen.
Regards,
Praveen -
SSL port is enabled, so why can't I connect through HTTPS?
Hi,
I'm using Weblogic 9.2.2, Solaris 9 with Java 1.5 We have our created our managed server within a cluster, and although we have enabled the SSL listen port ...
http://screencast.com/t/t5UN6Exwp
when I try connecting to our app through HTTPS in a web browser, I get a "Failed to Connect" error. Specifically in Firefox it says http://screencast.com/t/TGl0FIuQ. However, i can connect to our app fine through the HTTP port. How should I start troubleshooting this problem or what other info should I provide here?
Thanks, - DaveI tried everyone's suggestions and wanted to report back the results. Running
netstat -na | grep LIST | grep 7032produced no data. I did find a reference to the SSL port (7032) in my server log file, but didn't see any errors associated with it (I listed the working HTTP port first to compare) ...
####<Mar 12, 2009 10:47:03 AM EDT> <Info> <RJVM> <pacdcbpmdeva01a.cable.myco.com> <mmwcdc311> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1236869223832> <BEA-000570> <Network Configuration for Channel "mmwcdc311"
Listen Address 24.40.36.101:7031
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Mar 12, 2009 10:47:03 AM EDT> <Info> <RJVM> <pacdcbpmdeva01a.cable.myco.com> <mmwcdc311> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1236869223834> <BEA-000570> <Network Configuration for Channel "mmwcdc311"
Listen Address 24.40.36.101:7032 (SSL)
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Mar 12, 2009 10:47:03 AM EDT> <Debug> <RJVM> <pacdcbpmdeva01a.cable.myco.com> <mmwcdc311> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1236869223835> <BEA-000571> <Network Configuration Detail for Channel "mmwcdc311"
Finally, openssl produced:
[weblogic@mymachine logs]$ openssl s_client -connect 24.40.36.101:7032
connect: Connection refused
connect:errno=29
Anything else I should be looking for? - Dave -
My iPhone was stolen few months back. Inspite of giving my IMEI for tracking through Police all efforts were in vain. Possibly IMEI no. has been tampered for my iPhone. Do apple have some mechanism through which they can track current IMEI no. via serial no. as those morons will never think of changing serial no.
When we connect iPhones to iTune, Apple collects almost every information. They should consider providing this information if request is made by official apple id. When we are buying such permium & expensive products from Apple, they can atleast add this facility as a paid service @ nominal charges.
-
How can I have my partner messages through HTTPS
My partners would like to send messages through HTTPS and I see the following in one of the threads. Is this good even for HTTP(S) or only HTTP?
"ou cannot create HTTP listening channel. There is one default HTTP listening channel which you should use -
http://hostname:soa_server_port/b2b/httpReceiver or http://hostname:soa_server_port/b2b/transportServlet
Your remote TP may post documents to above URL's.
Thanks
VenkatVenkat,
It stands true for HTTPS as well. The partner should post documents on url (if SSL is enabled on SOA server)-
https://hostname:soa_server_port/b2b/httpReceiver or https://hostname:soa_server_port/b2b/transportServlet
If you are using any SSL off-loader at your gateway then the host and port will change accordingly.
Regards,
Anuj -
How can i use 10G Application through https
Hi..
currently i'm usning my application through HTTP now i
want to use through HTTPS.
what is the way?
Thanks
SanjeevHello,
I think http://appsdbablog.com/blog/2007/03/configuring_ssl_for_your_oracl.html
link will help you out with your queries.
Thanks
Santosh Shetgar
http://oraclefusionmiddleware.blogspot.com -
I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks
Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden -
Calling a web service through SSL via a stand alone java class
HI,
I am trying to call a web service through SSL via a simple stand alone java client.
I have imported the SSL certificate in my keystore by using the keytool -import command.
Basically I want to add a user to a group on the server. Say I add a user user 1 to group group 1 using an admin userid and password. All these values are set in an xml file which I send to the server while calling the server. I pass the web service URL, the soap action name and the xml to post as the command line arguments to the java client.
My xml file(Add.xml) that is posted looks like :
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope
xmlns:xsi = "http://www.w3.org/1999/XMLSchema-instance"
xmlns:SOAP-ENC = "http://schemas.xmlsoap.org/soap/encoding/"
xmlns:SOAP-ENV = "http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd = "http://www.w3.org/1999/XMLSchema"
SOAP-ENV:encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<namesp1:modifyGroupOperation xmlns:namesp1 = "/services/modifyGroup/modifyGroupOp">
<auth>
<user>adminUser</user>
<password>adminPassword</password>
</auth>
<operationType>ADD</operationType>
<groupName>group1</groupName>
<users>
<userName>user1</userName>
</users>
</namesp1:modifyGroupOperation>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I call the client as:
java PostXML https://com.webservice.com/services/modifyGroup "/services/modifyGroup/modifyGroupOp" Add.xml
I my client, I have set the following:
System.setProperty("javax.net.ssl.keyStore", "C:\\Program Files\\Java\\jre1.5.0_12\\lib\\security\\cacerts");
System.setProperty("javax.net.ssl.keyStorePassword", "password");
System.setProperty("javax.net.ssl.trustStore", "C:\\Program Files\\Java\\jre1.5.0_12\\lib\\security\\cacerts");
System.setProperty("javax.net.ssl.trustStorePassword", "password");
But when I try to execute the java client, I get the following error:
setting up default SSLSocketFactory
use default SunJSSE impl class: com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl is loaded
keyStore is : C:\Program Files\Java\jre1.5.0_12\lib\security\cacerts
keyStore type is : jks
keyStore provider is :
init keystore
init keymanager of type SunX509
trustStore is: C:\Program Files\Java\jre1.5.0_12\lib\security\cacerts
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
init context
trigger seeding of SecureRandom
done seeding SecureRandom
instantiated an instance of class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
main, setSoTimeout(0) called
main, setSoTimeout(0) called
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: .....
Compression Methods: { 0 }
[write] MD5 and SHA1 hashes: len = 73
main, WRITE: TLSv1 Handshake, length = 73
[write] MD5 and SHA1 hashes: len = 98
main, WRITE: SSLv2 client hello message, length = 98
[Raw write]: length = 100
[Raw read]: length = 5
[Raw read]: length = 58
main, READ: TLSv1 Handshake, length = 58
*** ServerHello, TLSv1
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
[read] MD5 and SHA1 hashes: len = 58
[Raw read]: length = 5
[Raw read]: length = 5530
main, READ: TLSv1 Handshake, length = 5530
*** Certificate chain
chain [0] = ...
chain [1] = ...
chain [2] = ...
chain [3] = ...
main, SEND TLSv1 ALERT: fatal, description = certificate_unknown
main, WRITE: TLSv1 Alert, length = 2
[Raw write]: length = 7
0000: 15 03 01 00 02 02 2E .......
main, called closeSocket()
main, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
main, called close()
main, called closeInternal(true)
main, called close()
main, called closeInternal(true)
main, called close()
main, called closeInternal(true)
Exception in thread "main" javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.c
ertpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(Unknown Source)
at java.io.BufferedOutputStream.flush(Unknown Source)
at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:506)
at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2110)
at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1088)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
at PostXML.main(PostXML.java:111)
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find v
alid certification path to requested target
at sun.security.validator.PKIXValidator.doBuild(Unknown Source)
at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
at sun.security.validator.Validator.validate(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(Unknown Source)
... 18 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(Unknown Source)
at java.security.cert.CertPathBuilder.build(Unknown Source)
... 23 more
I do not know where I have gone wrong. Could someone point out my mistake.
Thanks In advance!Hi jazz123,
There's an example in the [*Java Web Services Tutorial*|http://java.sun.com/webservices/docs/2.0/tutorial/doc/] : see Chapter 1: Building Web Services with JAX-WS - A Simple JAX-WS Client. -
I can usually print through the schools wifi using my laptop. Can i do the same using the iPad air? and if so how? Ive tried using the airprinter but it wouldnt load any printers. Usually I need to setup the printer through settings in my macbook. Can anyone help me how to do the same for my iPad?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Cheers, Tom -
Creation of shopping cart through HTTP request
Hello all, I am trying to create a shopping cart through a HTTP request.
The URL I am managing is the same that the one that the Web Service BBPSC01 uses.
Using the following code I cannot connect to the server in background, the error "This browser is not supported" is launched.
In addition to this, I can open the URL successfully via R/3 when executing online.
Help very appreciated!
Thanks.
data declarations
DATA: client TYPE REF TO if_http_client.
DATA: host TYPE string VALUE 'host',
host2 TYPE string,
service TYPE string VALUE '8000',
path TYPE string VALUE '/sap/bc/gui/sap/its/bbpsc01/?sap-client=020&sap-language=EN',
errortext TYPE string. "used for error handling
DATA: dest(13) TYPE c.
dest = 'ZPORTAL_CESTA'.
CALL METHOD cl_http_client=>create_by_destination
EXPORTING
destination = dest
IMPORTING
client = client
EXCEPTIONS
destination_not_found = 1
internal_error = 2
argument_not_found = 3
destination_no_authority = 4
plugin_not_active = 5
OTHERS = 6.
IF sy-subrc NE 0.
WRITE: / 'Create failed, subrc = ', sy-subrc.
EXIT.
ENDIF.
set http method POST
CALL METHOD client->request->set_method(
if_http_request=>co_request_method_post ).
client->request->set_version(
if_http_request=>co_protocol_version_1_1 ).
client->request->set_header_field( name = '~request_method'
value = 'GET' ).
set request uri (/<path>[?<querystring>])
DATA uri TYPE string.
uri = path.
cl_http_utility=>set_request_uri( request = client->request
uri = uri ).
FIN: conectamos el final de la peticion
Send
DATA timeout TYPE i.
CALL METHOD client->send
EXPORTING
timeout = timeout
EXCEPTIONS
http_communication_failure = 1
http_invalid_state = 2
http_processing_failed = 3
OTHERS = 4.
IF sy-subrc NE 0.
DATA: subrc TYPE sy-subrc.
CALL METHOD client->get_last_error
IMPORTING
code = subrc
MESSAGE = errortext.
WRITE: / 'communication_error( send )',
/ 'code: ', subrc,
/ 'message: ', errortext.
EXIT.
ENDIF.
CALL METHOD client->receive
EXCEPTIONS
http_communication_failure = 1
http_invalid_state = 2
http_processing_failed = 3
OTHERS = 4.
IF sy-subrc NE 0.
CALL METHOD client->get_last_error
IMPORTING
code = subrc
MESSAGE = errortext.
WRITE: / 'communication_error( receive )',
/ 'code: ', subrc, 'message: '.
EXIT.
ENDIF.
DATA return_str TYPE string.
return_str = client->response->get_cdata( ).
close
CALL METHOD client->close
EXCEPTIONS
http_invalid_state = 1
OTHERS = 2.
DATA html_control TYPE REF TO cl_gui_html_viewer.
DATA container TYPE REF TO cl_gui_custom_container.
DATA html_table TYPE TABLE OF char255.
Create container for HTML viewer
CREATE OBJECT container
EXPORTING
container_name = 'CONTAINER'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
MESSAGE e208(00)
WITH 'The control HTML_CONTAINER could not be created'.
ENDIF.
CREATE OBJECT html_control
EXPORTING
parent = container.
CALL FUNCTION 'CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = return_str
i_tabline_length = 255
TABLES
et_table = html_table.
DATA: l_doc_url(255) TYPE c.
CALL METHOD html_control->load_data
EXPORTING
type = 'text'
subtype = 'html'
IMPORTING
assigned_url = l_doc_url
CHANGING
data_table = html_table.
CALL METHOD html_control->show_url
EXPORTING
url = l_doc_url.Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator -
The Question says it all really.
Is there any way i can log onto Game Center via just my Username as i have forgotten the other details (I made the account when i was 11 - I'm now 14 and have a bad memory)?
I remember my Username on Gamcenter but due to the recent update of iOS7, it is only letting me Sign in through my APPLE ID - which i have forgotten over time. I wish to recover my account recently because I remember purchasing Gems on the game 'Clash of Clans' and I wish I could restart playing the game.
Many thanks for taking your time to read and answer this question.
-Gavin Chong.Hey xChongy!
I have an article here that can help you find that forgotten Apple ID:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
How do I burn a cd from the new iTunes
Now that I downloaded the new iTunes on my windows computer , I can't figure out how to burn a cd. It used to be easy. What's up with that?? Can anyone help me out?
-
hi experts, i want to display all items of customer means open and closed items. but on which condition we will display. reward points.
-
White on Black Settings causes all pictures to look like negatives
Hi, I was changing some settings on my iphone. When I changed the accessibility settings "white on black" --> On, the photos in my album started looking like negatives.. so did all the default wall papers. When I switch back to the "white on black "-
-
I keep getting "An error has occurred while trying to access the service".
I'm using Adobe Reader to convert pdf. to word for the first time. I keep getting "An error has occurred while trying to access the service". My subscription has gone thru and I am signed in. Help! I need to start using this ASAP
-
User Exit for Transaction CO11N Transaction
Hello Friends, I have a requirment , In the Transaction C011N , When I specify the Order Number, When I am confirming the Production Order , I want to compare the Item Level Material with some manipulated data .... But I am n