N9 Email: how to set separate passwords for incomi...

 I cannot use my regular outgoing mail server because my ISP requires that all outgoing mail is sent via their server.  If I set the outgoing mail settings according to ISP's instructions, sending mail still does not work but the e-mail program says that the server cannot be contacted or it does not exist.
I tried to set a new account using only ISP's instructions both for incoming and outgoing mail and it worked beautifully first. However, when I changed the incoming mail settings to my regular ones, incoming mail still worked fine but the same problem with outgoing mail emerged. The e-mail program allows separate user names for incoming/outgoing mail but I did not find a place where I could set separate passwords. It seems to my that when I set the new password for incoming mail, the program offers the same password for outgoing mail as well. I tried different settings (e.g. with and without SSL) and in some occasions, the program prompted me to enter password when sending a message but giving the correct password did not help at all and the program kept asking the password again and again.
Is it really so that you cannot have separate username & password pairs for incoming and outgoing mail in the N9 email program? If this is really the case, are there any other email programs available for N9?
Any help is highly appreciated.

You can't enter sites in a list to make Firefox remember names and passwords for specific sites.
If the password manager is enabled (remember passwords is check-marked) then Firefox will ask via a pop-up from the key icon that appears on the location bar whether you want to remember that name and password and that name will then appear in the list in the password manager window.
*http://kb.mozillazine.org/Password_Manager
*https://support.mozilla.org/kb/make-firefox-remember-usernames-and-passwords
Websites can use autocomplete=off to prevent Firefox from saving the name and password.<br />
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password in such a case.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Similar Messages

  • How to enable root on mac on 10.9.2 and how to set the password for the same ?

    how to enable root on mac on 10.9.2 and how to set the password for the same ?

    http://support.apple.com/kb/ht1528
    Follow the steps for Lion.
    But, why are you doing this? I've never found the need to do that.

  • How to set up passwords for two Comcast email accounts on Mail?

    Have Leopard. Cannot set up passwords on Mail for two Comcast email accounts. Does anyone know how to do?

    Hi Paul, & a warm welcome!
    Lineone
    Login
    [email protected]
    Incoming email (IMAP)
    imap.lineone.net
    Incoming email (POP3)
    pop3.lineone.net
    Outgoing email (SMTP)
    smtp.lineone.net
    What port & Authentication are you using?
    Can you login with your credentials in a Browser using the same info?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the exact message?
    Then click the Show Details button & Check again.
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
    If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • How do you set a password for a text document

    I was wondering, does anyone know how to set a password for a text document for example, if you have your passwords saved on a text document, how can you get a password to retreive them.

    How about Dashcrypt?
    http://www.dashboardwidgets.com/showcase/details.php?wid=588

  • ATG 10.1.2 . How to set BCC password through CIM?

    I'm new to 10.1.2 version, trying to installing and configure it properly to learn it. With CIM I configured and set Publishing, Production and Staging instances.
    I ran BCC after installation (http://localhost:8180/atg/bcc) and was prompted for password - admin/admin or merchandising/merchandising set by default in previous ATG versions didn't work in 10.1.
    I learned from ATGInstallGuide that there is no default passwords preset in 10.1.2 and I have to set them though CIM. (Or ACC)
    Here what is says:
    *"Through CIM. During the post-installation setup process, CIM prompts you to set the passwords for the*
    *default profiles that your environment requires "*
    I do remember I was once asked one for password for merchandising user only, and the password I set didn't allow me into BCC, so probably it was for something else.
    Please, advise how to set BCC passwords for default account (admin, merchandising and etc) in CIM? I don't see this option in CIM - I everything in CIM and didn't find it
    Just in case there is the list of options CIM provides me after running:
    [1] Database Configuration - Done
    [2] Server Instance Configuration - Done
    [3] Application Assembly & Deployment - Done
    [P] Product Selection - Done (Oracle ATG Commerce Reference Store &
    ATG-Endeca Integration & ATG Site Administration)
    [A] Select Application Server - Done (JBoss)
    *[C] Custom CIM Plugin Launcher
    I'm still not able to open BCC application
    Edited by: 994398 on Mar 17, 2013 5:36 PM
    Edited by: 994398 on Mar 17, 2013 5:37 PM

    CIM will ask for new passwords when you select Create Schema and Import data. If you have forgotten the pwd given by you, you can reset it.
    Check the below threads regarding similar issue.
    ATG 10.1.1 BCC -Default password for admin
    not able to login into ATG Dyn admin
    Cheers
    R

  • Set the password for zip file in unix

    Hi All,
    I have used the below command to zip the file and it is working fine.
    cd /YYYY;zip -r ZZZZ.zip ZZZZ.TXT
    While using the below command to set the password on zip file , I am getting error like "zip error: Invalid command arguments (encryption not supported)
    zip -P password -r ZZZZ.zip ZZZZ.TXT
    Can you please help me how to set the password for zip file in UNIX.
    Thanks,

    Do you use any characters in the password that might confuse the zip command? (like '-' or ';'?)
    If I use the command in RHEL4:
    cd /tmp
    zip -P password -r tt.zip gconfd-oracle
    adding: gconfd-oracle/ (stored 0%)
    adding: gconfd-oracle/lock/ (stored 0%)
    adding: gconfd-oracle/lock/ior (deflated 67%)

  • Setting a password for user access on AIR-SAP1602I-A-K9 running 15.2(2)JB2

    I am trying to assist a group with setting up their AIR-SAP1602I-A-K9 stand alone WAPs.  I would like to know how to set a password for clients to access the wireless network through these units.  I have been spoiled with our controller based WLAN.

    If you are doing it from the CLI
    dot11 ssid Test
    authentication open
    authentication wpa version 2
    wpa-psk ascii 0 "your key here"
    Interface Dot111Radio 0|1
    encryption mode ciphers aes-ccm
    ssid Test
    If you call a VLAN under the SSID, then you need to call a VLAN with the encryption statement under the radio interfaces.
    If you are doing this from the GUI:
    http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_10b_JA/configuration/guide/scg12410b/scg12410b-chap11-authtypes.html
    HTH,
    Steve

  • How can I set a password for firefox so that everyone have to enter the password before executing firefox

    My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?

    Also see this for an English version of Profile Password:
    *Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
    It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
    So do not rely on it.<br />
    If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system.

  • How can I set a password for my pictures on iPad Air ?

    How can I set a password for my pictures on iPad Air ? if anyone have my iPad access mail or something I don't want anyone access my photos so how can I set it up.

    You can't set a password for the Photos nor Mail apps, you can only set a passcode for your iPad as a whole (via Settings > Passcode).
    There are third-party photo management apps such as Photo Manager Pro which you can copy your photos into from the Photos app (and then delete them from Photos), that app allows you (via its settings within the app) to set a password to access it.
    For email you could access your email via a browser (and not have your password stored in the browser), or see if there are any email apps in your country's app store which have a password option

  • I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

    I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

    To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
    Email message files can be read as plain text in TextEdit or any word processor.
    To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
    It may work, but it seems like a lot of unnecessary hassle.

  • Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

    have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

    Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • How to set up rules for emails to go to junk on iphone 4

    i have an iphone4 that i use for work and a coworker sent out over 40,000 emails which has now overloaded my email to where i cannot send or recieve emails can i set up rules for his emails to go straight to junk? and how my email address is linked to iphone4s and ipad as well.
    ps i did set up the rules on my desktop but it didnt seem to work or flow over to the iphone or ipad or maybe i just need to delete the emails? however theres literally 30,000 of them who do i do that quickly? please

    The Mail app on the iPhone doesn't support filters. You'd need to do that on the server side (not desktop). There is just no quick way to delete 30,000 emails.  At this point, I would remove the email account from your phone, delete the offending emails from your account, then add the account back to the iPhone.
    I would also report the co-worker to your IT department (if they haven't already noticed) for sending that many emails. I'm surprised that it didn't cause issues.
    Best of luck.

  • How to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

    I want to know how to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

    You have to connect via ODBC, then use code along the lines of what is described here:
    http://scn.sap.com/thread/3526924
    by me on March 28 and Jan on March 29.
    Also see KBA: 1686419 - SAP Crystal Reports designer does not recognize Access *.accdb file
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • How do I set a password for adobe reader?

    how do I set a password for adobe reader

    You can set a password for your device (iPad or iPhone) in Settings. You cannot set a password on the Adobe Reader app itself.
    If you want to password protect a PDF document you cannot do it in Reader. It must be done in Acrobat on Macintosh or Windows.

  • How to set Compatibility Mode for a single site in ie10

    This question was originally posted on the Answers forum -
    http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
    I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
    When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
    This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
    Using a different example to explain the issue -
    Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
    microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
    msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
    technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
    The only thing the three website share is the URL contains 'microsoft.com'.
    Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode. 
    Should you be able to add an individual site to the compatibility list instead of all sites that have  .microsoft.com in the URL? Am I missing a simple setting in the ie10?
    As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation. 

    problem is not solved for non corporate environments...
    You could start your own thread.  Then if you got that answer and it was marked Answered you would have the ability to unmark it.  The OP of this one seems satisfied.  Also note that this is TechNet.  Consumers can get help on Answers
    forums.
    Robert Aldwinckle
    Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
    The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
    But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
    Regards
    /Aldus

Maybe you are looking for