N9 keep switching off on its own

my N9 does not power on it keeps switching off on its own....can anyone assist?

So it isn't the sim and not the boot loop.  Have you tried charging using any source just to make sure that isn't the charger? Failing that you might have to consider a hard reset. 

Similar Messages

  • My imessage stopped working over the wknd when I went to check if it was on it had switched off on its own. Now I try to turn my imessage back on and its giving me some kind of server error. Any suggestions?

    My imessage stopped working over the wknd when I went to check if it was on it had switched off on its own. Now I try to turn my imessage back on and its giving me some kind of server error. Any suggestions?

    Ok actually my mistake it says "an error occurred during activation. try again" I spoke with apple tech support right now and she mentioned they are having trouble with there servers.  Do you by any chance know what the restrictions area means? Should that be activated or deactivated, does that make a difference?

  • Ipod doesn't switch off on its own

    Hello,
    I have a black Ipod 60GB and it doesn't switch off on its own. I know that the old Ipods will switch off on their own if you are not using it for more than a couple of minutes. So I thought the 5th generation would do that as well but mine doesn't and it's really annoying. Does anyone know if 5th generation Ipod should do that? And if yes, in which part of the menu can I set that option?
    Thanks.
    Alexandra

    Hello, Welcome to Apple Discussions
    The iPod will turn off after 1 minute if there is a song on pause, or if there is nothng playing.
    xmartinx

  • Hey, my iPhone 5 gets switched off on its own. Couldn't switch it on immediately. Have to put it for charging and gets switched on... What should i do now for this???

    Hey, my iPhone 5 gets switched off on its own. Couldn't switch it on immediately. Have to put it for charging and gets switched on... What should i do now for this??? when evr i go out this is one big problem i get... Couldn't use my fone.... Have to wait until i go back home...

    Start here www.apple.com/ca/support/ or call 1-800-263-3394.

  • My iPhone  5 keeps turning off on its own randomly what should I do

    My iPhone  5 keeps turning off on its own randomly, sometimes turning itself back on automatically but sometimes staying off, i have tried a system restore but has no effect, what should I do?

    Do you have a case on the iPhone? Did you accidentally drop it or damage it in anyway?
    You could try restoring the iPhone and setting it up as a new device, as shown here -> iOS: How to back up your data and set up as a new device

  • Mac Mini keeps shutting off on its own!

    Okay Apple Discussion Users, Here is my problem. I have a Mac Mini from early 2008. As of May 23, 2009 the mini started to RANDOMLY turn off on its own. For what reason, I Don't know! I will be using it maybe searching the web, and BAM, OUT COLD. And I have no reason why it's doing this. Its not a heat issue because i just had my mini cleaned up(dusted out) and i use SMC fan control keeping my mini at about 98ºF to 120ºF most of the time. I have opened my mini and re-seated my ram sticks and it seems to STILL be doing the same thing. Sometimes the mini will even blank out. I will be searching the web listening to music or something and the screen will black out. but the mac will still be on. I just cant use it. I have even reset my PMU/SMC on the mini, that seemed to make the mini act really weird, right after doing that the mini turned on with a fan running FULL speed and the hard drive running FULL speed, WHY IS IT DOING THIS ?!?!?!?!
    Help!

    Proper steps to reset the mini:
    # Force Quit (Option-Command-Escape).
    # Restart (Control-Command-Power).
    # Force Shut Down (press the power button for 10 seconds)
    to reset the SMC:
    1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    2. Unplug all cables from the computer, including the power cord and any display cables.
    3. Wait at least 15 seconds.
    4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
    5. Press the power button on the back to start up your computer.
    Now if these to not work, the next thing i would try is uninstalling the fan management software and unplugging everything except the K/V/and mouse/
    Message was edited by: tm311

  • 6300 switches off on its own

    my phone 6300 switches off every 1 hr. This problem started since oct begining and now it is not switching on at all. Any advice relating to this problem are welcome.

    I would suggest a software update but since it cannot switch on at all now I think it is a hardware issue.
    Take the phone to a Nokia Service Center and ask them to check it out for you. They can reload software, repair parts or replace the phone for you if that is the only option.
    Knowledge should be your Advisor when you need help.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

  • My iphone4 keeps shutting off on its own every 24-36 hours and I can't switch it back on unless I plug it into the charger n charge it. I didn't charge the iPhone for a long period the first time I used it and I charge it every night for at least 7 hours.

    My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

    My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

  • Bold 9900 not switching off on its own

    i have a bold 9900. when the phone powers on, it goes of after a minute on a successful boot. it stays on only when the music is playing. when the music goes off, it goes off. i have downgraded and the problem persists. i have tried upgrading but each time the desktop manager tells me errow in downloading additional software. in other words, the online upgrade is not succeeding. please, who has an idea on what i will do to get this phone back on without having to put my music on just to keep the phone on as doing so drains the battery.

    Hi Keanan,
    Discussion Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines
    This could be related to a SIM card, SD card or even a third party app, the best thing to start with is to remove the SIM card first, if the issue continues remove the SD card, if still the issue continues, then it is likely related to some third party software.
    Try going through the process of elimination and let us know how you get on.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Try resetting the PRAM and SMC.  Try making the device a favorite .
    Barry

  • Why can't I turn Airport on in my iMac? It turns off on its own.

    I have an iMac with leopard and an intel processor. Airport (the hardware/software responsible for my Wi-Fi) seems to turn on and off on its own.
    Sometimes when I log on, Airport is on. Sometimes after it goes to sleep, Airport is on. But sometimes, Airport isn't on, and there's nothing I can do to turn it on. It appears that this is an issue other users are having, but I can't find the resolution. I am looking for easy steps!
    I have gone to network preferences, and tried pushing that cute little "Turn Airport On" button. Nothing. I've tried deleting the locations and adding a new one. Nope. I've changed the order of the network devices. I've tried to turn airport on through that little icon in the upper right. It's hollow, and tells me "No Airport Card Installed". It's lying. It was there two days ago. System profiler tells me that there's no Aiport card installed, but it did *two days ago*.
    I admit my ignorance of Macs whole-heartedly. I bought my first a month ago - I only spent 3 hours that first day getting it on my network. The next day I spent another 3 hours getting it BACK on the network. Now I have spent 2 days trying to get it to believe it CAN get on a network.
    An Apple salesman convinced me how terrific Macs were, and impressed me with how easy they are to use. He made a crack about how inferior Dell was and how sorry he felt for me. I am writing this message on a Dell laptop. It is connected to my wireless network. It took me 3 minutes to connect it, and it never once has told me that it no longer has a network card. Neither have the other 3 PCs in my house.
    Can someone PLEASE save a poor, helpless PC user. I clearly need assistance -I read somewhere that I can run a 'script' to turn it on - but I don't know this OS so I don't understand what that entails
    If any answer involves taking my Mac into a "Genius Bar", then the "Genius" can keep it. I've never had to take an out-of-box PC to a "Genius" - because it doesn't take one to fix a PC. Please guys, save a PC user. This Mac cost more than the PC I wanted and it's worth a lot less to me right now.

    Hi, sorry to hear that you are experiencing these problems, but sometimes a new machine (be it Apple, Dell, whatever) can be defective right out the box - its not unheard of.
    If your machine came with defective hardware and is still under warranty (seems to be the case here) then you have nothing to lose taking it back to where you bought it and, if there really is defective hardware present I am sure they'll rectify the problem.
    A small note: these problems are not manufacturer-specific - its pointless blaming the manufacturer as I can assure you this happens with ALL brands. Apple supplies quality hardware and software - I know of a user who has had a machine switched on since 1987 without problems

  • After downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    after downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Can I lock my 6th generation ipod nano whilst listening to it as it keeps switching off if i knock the sleep button

    can I lock my 6th generation ipod nano whilst listening to it as it keeps switching off if i knock the sleep button?

      Okay, I apologize, belay my last posting :/
      This evening after a whole day of working fine (again), I had the same problem, but this time my idea couldn't fix it.  One point I'd like to make is to NOT listen to your ears when troubshooting your ipod.  When your ipod is turning off, try tuning into the radio.  Mine tells me that it isn't recognizing my earbuds and won't even turn on the radio.  I'm going to try to clean the connection out, but really?  This is freakin' new, Apple people!  Maybe its a way for the company to make you purchase new accessories for the ipod they replaced with the recall :/

  • IPad frequently shuts off on its own

    I was near the end of writing a long email today and the ipad suddenly shut off on its own.  It has been happening for the past 3 days with other programs also, with the battery far from depleted.  Is there a solution to this problem?  Is there a way to save draft without closing the email?  Possible to trade in for a new iPad with this reason?

    When you type an email You can save a draft by tapping the word cancel in the upper left corner and an option to save draft or delete will pop up. Select save draft.
    I assume that you mean that the apps are crashing and that the iPad is not shutting off on it's own. If you use an app and it crashes it takes you back to the home screen. If the iPad totally shuts down, the screen turns black and you cannot wake it by tapping the sleep button or the home button.
    If apps are closing or crashing, try to download any free app - restart the iPad and see if that helps keep the other apps from crashing or closing. If it works you can delete the app if you don't want it.
    Try closing apps. Double tap the home button to bring up the task bar. All of your recent apps will be across the bottom. Tap and hold down on any app icon until they all wiggle. Then tap the minus signs in the left corner of all of the icons in order to close the apps. Tap the home button twice. Then restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up, hold the sleep button until the Apple logo appears.
    You could try resetting the iPad as well. Press and hold down on the sleep button and the home button at the same time for about 10-15 seconds, until the Apple logo appears - ignore the red slider.
    If the iPad is totally shutting off - it could be time to restore the device.
    Message was edited by: Demo

  • My iPad air keeps shutting down on its own!

    My iPad air keeps shutting down on its own, and this is the second IPad Air doing this. I really don't want to go trade it in for another. Does anyone have the same issue and is there a way to fix it? And yes I've done the manual reset and computer reset.

    Memory Size & The Impact of 64-bit Applications
    The iPad Air, like the iPhone 5s, ships with 1GB of LPDDR3 memory. Apple frowns upon dissection of review samples but I think it’s a safe bet that we’re not talking about a PoP (Package-on-Package) configuration but rather discrete, external DRAM here. It’s also probably a safe bet that even the iPad mini with Retina Display will ship with 1GB of memory as well.
    Something I didn’t have time to address in my iPhone 5s review was the impact of 64-bit applications on memory usage. I actually ran some tests after the 5s review hit but never got the chance to share the data, so I figured now is as good a time as any to do just that.
    Unlike traditional desktop OSes, iOS doesn’t support paging to disk (or in this case, NAND). Application data can either reside in memory or the associated process is terminated and has to be reloaded the next time you request it. It’s a decision likely made to both maintain user experience and limit the number of program/erase cycles on the internal NAND.
    The good news is that iOS was architected to run on as little hardware as possible and as a result tends to be quite memory efficient. There are also power implications of going to larger memories. The combination of these two things has kept Apple on the conservative side of increasing memory capacity on many iDevices.
    The move to a 64-bit platform however does complicate things a bit. Moving to a larger memory address space increases the size of pointers, which in turn can increase the footprint of 64-bit applications compared to their 32-bit counterparts. So although there’s clearly a performance uplift from app developers recompiling in 64-bit mode (more registers, access to new instructions), there’s also an associated memory footprint penalty. Since the iPad Air and iPhone 5s don’t feature a corresponding increase in memory capacity, I wondered if this might be a problem going forward.
    To find out I monitored total platform memory usage in a couple of scenarios. Before measuring I always manually quit all open apps and performed a hard reset on the device. Note that the data below is reporting both clean and dirty memory, so it’s possible that some of the memory space could be recovered in the event that another process needed it. I hoped to minimize the impact by always working on a cleanly reset platform and only testing one app at a time.
    I looked at memory usage under the following scenarios:
    1) A clean boot with no additional apps open
    2) Running Mobile Safari with 4 tabs open (two AnandTech.com tabs, two Apple.com tabs, all showing the same content)
    3) Infinity Blade 3 (64-bit enabled) sitting at the very first scene once you start the game
    4) iOS Maps in hybrid view with 3D mode enabled, with a WiFi assisted GPS lock on my physical location
    5) Google Maps in the same view, under the same conditions. I threw in this one to have a 32-bit app reference point.
    In general you’re looking at a 20 - 30% increase in memory footprint when dealing with an all 64-bit environment. At worst, the device’s total memory usage never exceeded 60% of what ships with the platform but these are admittedly fairly light use cases. With more apps open, including some doing work in the background, I do see relatively aggressive eviction of apps from memory. The most visible case is when Safari tabs have to be reloaded upon switching to them. Applications being evicted from memory don’t tend to be a huge problem since the A7 can reload them quickly.
    The tricky part is you don’t really need all that much more memory. Unfortunately as with any dual-channel memory architecture, you’re fairly limited in how you can increase memory capacity and still get peak performance. Apple’s only move here would be to go to 2GB, which understandably comes with both power and financial costs. The former is a bigger concern for the iPhone 5s, but on the iPad Air I would’ve expected a transition sooner rather than later.

Maybe you are looking for

  • How to sync my iCal with my phone

    I am a seriously new iMac owner and I was wondering if I can sync my iCal with my Android phone?  If anyone knows I would really appreciate the help.

  • Two layouts in one report

    I have a requirement where I have two queries giving two different outputs, I want these two in one single report with two layouts, I was able to achieve this with Concatenate option and there by build by RTF templates based on the Groups of each que

  • Create Transformation - Error

    Hi All, I am trying to create a Transformation from a Update rule. but when i am clicking on create Transformation i am getting the below error. <i><b>UNIT STD is not created in language EN</b></i>. Please help me to relsove this error. Thanks and re

  • Move generate export infosource to other application component

    I have generate export datasource from ODS i.e 8YSD_O3 and the generate infosource is come up under application component 'data marts'. Wondering how can I move the infosource 8YSD_O3 to other application component ?

  • MacMini update - after restart cannot log in anymore!!!!

    I had my MacMini running unattended for a week or more and today when I returned to it I got a popup requesting me to restart in order to "update" something. So I allowed it to do this. Bad choice!!! Now when I reach the logon screen and after I have