N9 - Message ringtone fades? Doesn't complete the ...

Hi all. I tried using a song or at least a 40sec song for my message tone, unfortunately, it fades out before the song finishes. How do we stop that? Why did Nokia make it that way? Thanks.

40 seconds is quite long!
there seems to be nothing wrong with your device, just the length of your ring tone.
congrats on finding the limit!
i would time the lenth of what it plays and splice the song to something smaller than that which would make more sense so it repeats itself better.

Similar Messages

While playing a game on my IPad when I try to purchase additional gems I get a message to contact ITunes to complete the transaction and it won't let me make the purchase unless I purchase a lessor amount. anyone else had this problem?

When I try to purchase more gems when playing The restaurant Story, I have a problem. I get a message to contact ITunes to complete the transaction. This is an internal problem and has nothing to do with my accounts credit card or anything. I had this problem before and it took forever to get it corrected. I could not even get a response from Itunes. I had t contact Apple and they contacted Itunes and it was corrected immediately. It has worked fone for the past couple of months but now it is back to the same thing. Has anyone else experienced this problem and if so what did you do to correct it?
any help will be greatly appreciated !

Hi, I got the same problem. Did you fix your problem? How did you fix it? Thanks.

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBoo

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
Problem started after deleting parrell desktop and window7 ?
Please help?

Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3. I haven't come across Preview or this problem before. Any suggestions?

I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address. Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format. I haven't seen Preview, or had any problems, before now. Thanks for any suggestions.

Hi,
Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

I keep getting this error message "Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/MacBook Pro.sparsebundle" is already in use." What should I do to remedy this?

I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?

Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan

HT3275 I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.

I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.

I have experienced the same problem on a MB Pro 2011 and a 2013 MBAir both with updated OS's. OSX10.9.3. WD MYBookLIVE 3Tbyte. I have found the only solution is to reboot the WD device thru Western Digital's software that you can access via the IP address for the WD device. For example, if you type the WD backup device's IP, like ... "125.261.1.38 " in the Safari address bar, WD has built-in software the runs a program that allows you access to the WD unit to maintain it, turn it off, reboot it, partition it, etc.
Doing this, I believe disconnects or ?dismounts? the WD from TM and resets everything. It works most times, not always, Sometimes you need to reboot the Mac too.
I'm more interested in what is causing this frequent failure on the WD. It happens to me several times per week. I suspect, network failures or improper disconnections between WD and the Mac (not caused but the user) are the culprit but I haven't seen any blogs on a permanent fix. Spent hours on the phone with WD techs; they were clueless. I found the "fix" myself.
Further, I often get an associated reply to "dismount the WD" with the "sparse bundle.XXX is in use" error. But when I go to Finder or Disk Management to find out what's mounted on the Mac, the WD is never mounted, even when the TM backup is working properly. I find the WD device under SHARED in Finder. Its never mounted, so I can't dismount it.

D wont backup to icloud. it is enabled but i get a message "There was a problem completing the backup. Please try again later. I have tried multiple times over the last 24 hrs. My iphone backs up to icloud fine

Mo ipad 2 won't backup to icloud. I get a message "There was a problem completing the backup. Please try again later. I have tried multiple times over the last 24hrs but no luck. My iphone backs up fine on the same wireless network.

i have this issue to any solution yet?

How can I back up ipad on icloud? Keep getting message "There was a problem completing the back up. Please try again later." I have, many times! The trouble shooting info does not resolve the problem.

How can I back up ipad on icloud? I keep getting the message "There was a problem completing the back up. Please try again later." I have done so MANY times! I've followed the instructions ( I believe!) and the trouble shooting info does not resolve the problem. Can you please help?

I had this exact same problem because the router i had in my house was having interference issues and the speed was too slow to do it.
I would download a speedtest app on your iPad and see how fast your internet is. I think the app is called speedtest in fact.

Iweb publishing to...99% - but doesn't complete the task

I've had no problems w/ iweb on my site, www.usgreenlist.com
until now. The problems began after I deleted a very short blog page and added a snippet on another page to direct some one to a TV program in iTunes.
Now iWeb loads 99% of the way, doesn't do the last update, and doesn't complete the publishing task. and sits...as if it were frozen.
I've looked at iWeb help, I've published 'all' as instructed, instead of just the updates. I have the most updated iWeb.
Any suggestions? Thank you.
Matt

See this topic...
http://discussions.apple.com/thread.jspa?threadID=1442201&tstart=0
You can also try quitting iWeb, deleting the file Home Folder/Library/Preferences/com.apple.iWeb.plist,
restarting your Mac, running Disk Utility to repair permissions and then relaunching and try publishing again.

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html

I keep getting this error message: Time Capsule could not complete the backup. The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBook Pro. sparse bundle" could not be assessed (error -1). Tried restarting etc. Please help.

I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....

The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process.

I have an error message:Time Machine couldn't complete the backup to Time Capsule. The backup disk image is already in use.

I'm a single user, no Airport, and the Time Machine has been backing up nicely for several months. Recently, I've been getting the above message. Any help is appreciated.

Restart the TC. If that doesn't work, do as follows.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

I just upgraded Firefox and it doesn't complete the installation before is give an error and stops running. What is wrong and how do I fix the problem?

I have deleted the older version of Firefox and re-installed the latest version. I still get the same results.
The error occurs when Firefox is putting up the home page. The Firefox home page is never completed. A message appears at the top which says, (Not Responding). The only thing I can do is close Firefox and start over again.
I have turned off the firewall. Still no help.
I am using McAfee.

I have done it before.. but other than saying it worked there was no other indication.
https://discussions.apple.com/message/22042667#22042667

N9 - Message ringtone fades? Doesn't complete the ...

Similar Messages

Maybe you are looking for