N9 PR1.1 update screwed up the phone, address book...

Oh yeah now my facebook and web apps work perfectly BUT this almost completely destroyed my address book and phone apps. Well who would like to add address to address book anyway. Come on! Give me a sw that has the basic functionality working. Maybe I fall back to the older one...
Solved!
Go to Solution.

Almost all the basic apps are now working very badly. Example camera app: I took a picture and it doesn't save the file to the device properly. The other is the address book as I said it let's me open a add new contact page, but when I try to save it the app crashes. The same with cancel saving. So I think I'm going to try to backup everything to my pc and then fall back to the older sw and then run factory settings and then the update and let's see what happens.
I guess there are two possible reasons why this happened. If u can figure put something else please let me know...
1) I don't know if it has to do with my problem but I run the update with the developer mode on.
2) The other option is that I got the device from the Qt developer days and I run the update from Finland. But this affects only if the sw is somehow area dependent

Similar Messages

  • 5800 update screwed up the phone

    Just updated the phobe last week and since then the phobe heats up really fast and the battery dies really quick. Also the phone stops working once it heats up. So I have to remove the battery and let it cool off before using it again ....
    Why is this ???

    You could try running the update again - now that you have the latest version of software, re-updating would simply reinstall the latest. It is possible that something went wrong in the original attempt and part of the software is corrupt as a result.
    If trying again doesn't help the situation, take the phone to a Nokia service point to be properly repaired. If your phone is still under warranty, then problems caused by updating via NSU or Ovi Suite are covered under warranty.

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201210 I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.

    I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.  itunes says I have to restore my phone, but will lose all the data.  Is there anything else I can do? I really don't want to lose all my pictures and other data.

    It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
    you have no choice but to restore at this point.

  • While updating the software from 6.1.3 to 6.1.4 on iPhone 5, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in.

    While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
    Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
    Regards.

    Try this
    iOS: Device not recognized in iTunes for Windows

  • HT4972 i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?

    i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?

    Would this matter then? can you not update the 3g to the lastest software?

  • I have an iPhone 6. I am signed in to iTunes with my Apple ID. I am updating apps and the phone keeps asking for my wife's Apple ID.

    I have an iPhone 6. I am signed in to iTunes with my Apple ID. I am updating apps and the phone keeps asking for my wife's Apple ID.

    How can I find which Apple ID was used to purchase each app? I am trying to find the answer but not having any luck. thanks!

  • Hello there! I have updated iPhone 3GS software but once the update got completed the phone is not getting just restarting it again n again. Please help.

    Hello there! I have updated iPhone 3GS software but once the update got completed the phone is not getting just restarting it again n again. Please help.

    Hello Amarchand Sharma,
    Are you working with a Windows computer?  If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
    http://support.apple.com/en-us/TS3221
    Regards,
    Judy

  • WHY IS IT THAT THE OS UPDATE SCREWS UP THE Z10 MORE THAN RESOLVE ISSUES???????????

    WHY IS IT THAT THE OS UPDATE SCREWS UP THE Z10 MORE THAN RESOLVE ISSUES???????????

    Is there a question in there somewhere? reply with caps lock off please. :-)
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • TS1398 I am getting when manually entering wifi info of "Could not scan for wireless networks" wireless is working on other devices, how do I cure this?  The problem only began when I updated software on the phone.  Previously I had no problems with wifi.

    After updating software on Iphone (wifi worked fine before the software update) I  now can not get on wifi.  The phone with not find a working wifi network nor can I connect manually.  Wifi is working on other devices.  I have turned the phone on and off, turned the wifi router on and off and reset the iphone and down loaded updated software to the phone.  Nothing has worked.  Does anyone have an answer for this problem?

    Could this be the problem?
    iPhone 4 Modem Firmware : 3.0.04
    iPhone 4S Modem Firmware : 2.0.10
    Wifi is working on my iPhone 4, NOT on 4S -
    Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
    I am so tired of trying to figure this out.
    The Wi-Fi addresses in the About settings are different on both phones too.

  • I synced my wife's iphone under my acct and it updated software on the phone but now because it synced under my acct she cannnot open certain programs on the phone

    synced my wife's iphone under my acct and it updated software on the phone but now because it synced under my acct she cannnot open certain programs on the phone

    I would test with another computer and another cable
    if it the device would not be detected by any computer I
    would say that it's connector was broken

  • Skype problem after update problem in the phone language

    Skype problem after update problem in the phone language
    after update to the Windows version the previous month after Skype version update I get this message that came in and tried in every way and the same message so I thought it's a problem in version bskaib and I wait for the update for acne is a problem particular
    to discovered that Skype wouldn't even be open on your browser-and I want to know if there is a way to make to download languages because the language of the United states are available for the device does not support language harbored her mean in the sense
    that I If you want the device English picked united kingdom and the United States version of does not support hardware keyboard language only!

    The Windows Store Development forums are for developers to discuss writing their own Windows Phone apps. For help with using Windows Phone please ask in the Windows Phone forums on
    http://answers.microsoft.com .
    --Rob

  • Sharing certain groups in address book rather than the whole address book

    Hi
    I haven't got server yet in our office but we are looking to do this. Currently we just share calendars and other bits and pieces but I'm looking to get server in place. Sharing the address book requires giving a user our iCloud password and letting them look at the address book as a whole. We really only want to share certain phone numbers like our company staff phone numbers rather than our financial clients and other sensitive contacts.
    Is it possible to only allow a "user" to access certain, or 1 group in address book rather than the whole address book library itself by using osx server
    Many thanks

    Hi Jaime,
    I just wanted to jump in here with a quick question... on Mac OS X Server my understanding was that with the open directory, you can't designate organizational groups for the ldap service. Without that ability, how are you limiting what ldap users can see?
    In our setup, our LDAP settings would be similar to
    cn=users,dc=example,dc=com
    What format would you use to say show only members of the group "examplegroup"?
    Thanks!

  • How to transfer the whole address book from one no...

    Dear friend,
    Could you please advise me "how to transfer the whole address book from one nokia to another nokia phone via blue tooth connectivity. (move one by one is not convenience for my hundreds of contact.
    Thank and waiting for advice...
    victor

    If your phones have the built-in "Transfer" (sometimes called "Switch") application, try it.
    Otherwise, depending on the model(s) you can also copy all contacts to/from the memory card, and get them over that way.
    And you can also synchronize both programs to the same service (e.g., Outlook on a Windows PC using Nokia PC Suite).
    And newer versions of Nokia PC Suite can also be used to make a backup of one phone, and then restore to another.
    PC Suite you can find here: http://www.nokia.com/pcsuite

  • Does the Export Address book work also with Mavericks ?

    I want to export my address book to excel file ? Does the Exporter address book for mac was tested with MACOSX Maverick ? Is it going to work ?

    For the next person to come along, here are Microsoft instructions for formatting leading Zeros in Excel. http://support.microsoft.com/KB/81518
    An image of the phone number being set to text in Excels import Wizard. I don't have the 2007 version available to test, but I do not recall it being any different about a decade ago.
    <img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-09-20-22-53-96019d.png". and a link to the Microsoft documentation for Excel 2007 indicating that dialog was in Excel 2007 as well. http://office.microsoft.com/en-001/excel-help/text-import-wizard-HP010102244.aspx?CTT=5&origin=HP010099725

Maybe you are looking for