N9 PR1.2 Update rollout

Hi All, work up this morning to the exciting news of PR1.2 for my Nokia N9. When I checked this morning it was not available yet.
Any time frame on When the update for my Australian unbranded cyan N9 with 20.2011.40-4.299.5_299 software will be available?

Hi!
Here's the official information that I got from our Nokia team in Australia.
“We’re pleased to be bringing the Nokia N9 updates to consumers in Australia and New Zealand. We are currently working through the technical requirements, and with our operator partners, to ensure a smooth update process for consumers. We don’t have visibility on timings just yet but hope to make available as soon as we can. Please bear with us while we work through this detail.”
Best regards,
Yvonne from Nokia Care

Similar Messages

BIGGER FONT IN PR1.1 UPDATE

I have been told that the PR1.1 update comes with a bigger font although is still non adjustable. It does help in the readibility department in view of my aging eyes. Can anybody with PR1.1 installed in their N9 confirm this? Thank you & looking to all your replies soon. Cheers mate!

@diff
Pretty sure that I posted N9 v Lumia 800 font comparision recently but no noticeable difference upon N9 between PR1.0 & PR1.1 as far as I am concerned, although both these devices are woefully inadequate when it comes to accessibility and however much iPhone is slated upon this forum it at least addresses these issues as per screenshot:
Happy to have helped forum with a Support Ratio = 42.5

N9 AFTER FIRMWARE PR1.1 UPDATE

Hi guys, would anyone of you out there want to share with me your experience after your N9 has been updated with PR1.1? (As of now PR1.1 is still not available in Malaysia) Like is it now a better phone than before? I'm still emotionally attached with this phone even though I have sold mine just before the PR1.1 was released. Guess I pulled the trigger prematurely. My biggest complain is the small default Font size & I have been told that with the PR1.1 update the Font size is somewhat bigger now. Blame it on my aging eyes - LOL! I'm seriously contemplating getting another N9. The hardware is just awesome & out of this world. Cheers mate & hope to hear from you guys soon.

I will have to second overlord above on this one. I have set uo two mail accounts which works just as it should.
I have noticed that the phone multitasks better and that my wifi signal and performance has improved - not much but enough.
For some reason I believe that the volume on ringtone has gotten a bit louder with PR.1.1 along with volume during call, but it might not be at all.
All in all very happy with the update and looking forward to the next one. Meantime I will enjoy this piece of perfection

N9 PR1.1 Update released

Hi all,
just to inform you that we have now started to publish PR1.1 update for N9 (software update version number 20.2011.40-4). The updates are published in waves and your phone will display a notification once it's available for you.
Some of the new features include:
NFC tag reading to instantly interact with NFC tags
Music controls on lock screen
Photo and video shooting with color filters: black & white, sepia, vivid, negative, solarize
More powerful multitasking with improved memory handling
Swype for fast typing
Faster MfE synch, synchronizing only active folders
Noice cancellation reduces background noise so that your friends hear you better
Close apps easily with swiping down, this now on by default
New indicators for standby screen like charging and calendar
etc.
Enjoy!
BR,
yvonne

This is brilliant news!! I know Nokia are often quite secretive regarding changes and bug fixes in firmware, but there appears to be a serious issue with a number of 64GB devices (particularly Austrian black 64GB handsets). Serious stability issues, random reboots and app crashes plaguing a number of these devices
Do you know if there might be a fix to address this particular problem?
The N900 suffered a similar random reboot issue just after launch that was completely fixed in the first firmware release (start of 2010). The key thing here is many users are waiting to send back their phones if they are genuinely faulty but at the same time, many will wait to try PR1.1 if it addresses this problem.
Do we know if there have been any stability improvements, particularly targetting Finnish made 64GB models?
I have mine boxed to be sent back to the supplier today (to order again at a later date), if PR1.1 solves the problems I'll definitely hold off and I'm sure a number of other users will too.

HELP...After PR1.2 update the KEYBOARDS are comple...

Hey kids,
after PR1.2 update earlier today (central EU N9) my keyboards are LOST...
no Swype, no basic keyboard...in Settings: no keyboards installed, no active text input, nothing to choose from...
I tried to re-install immediately, no PR1.2 on NSU or yet...
I can`t write any message, set any password....
damn it
Moderators notes: Mentioning unauthorised methods of flashing not allowed on the fourms.
Solved!
Go to Solution.

Hi,
can you please provide more info about your configuration? It would be useful to have quick voice input keyboard version, harmattan version (pr.10, pr.1, pr1.2 - you can find it in Settings->Info), language and regional settings, other input methods installed and everything you think could make your phone different from others. Yours is the very first (and until now unique) bug report for the v0.1.7 and it would help a lot to have as many info as possible to fix your issue.
Kind regards,
Patrizio Bruno

Receive Connector stopped working after Update Rollout 2 for Exchange 2007 SP2

One of the Exchange 2007 servers receive connector has stopped working since installing the latest rollout update for Exchange 2007 SP2 - for some reason the following error is received (when troubleshooting on the adjacent server) :
"Remote server server.domain.co.uk failed the mail acceptance test. MAIL FROM command: Respond = 530 5.7.1 Client was not authenticated."
Most admins will know you usually get this when first setting up Exchange and the receive connector not allowing anonymous connections. But our setup has been working for well over a year with no problems. Even enabling anonymous connections still doesn't fix the problem.
Our setup is 2 exchange servers across 2 sites, with the problematic server never receiving email from the internet, only from the other Exchange server (which is internet facing). The above error is received when the internet facing server is relaying email over to the problematic server. Though in the message queue the following error is received:
"SMTPSEND.DNS.NonExistantDomain; nonecistant domain"
After testing DNS that all seems fine, so I don't believe it's a DNS problem.
Any ideas why this would happen?
Thanks,
Matt

Hi Matt....
To receive e-mails from the external servers or domains or clients, you can setup a new receive connector on Hub Transport Server. To do this task, you can go through the steps mentioned in this blog....
https://mailsolutions.wordpress.com/2015/02/06/resolving-error-530-5-7-1-client-was-not-authenticated-with-receiver-connector/
Hope this will work
Thanks

All quiet on the N8 PR1.1 update front - Nokia fai...

Whilst the vast majority of N8s around the world have received this update there seem to be a large number which are "stuck in the system".
In a separate thread ( /t5/Software-Updates/Official-Nokia-N8-PR1-1-Software-Release-Schedule/td-p/923407) Nokia were providing a regularly updated spreadsheet of when the update would be available by phone variant. That's not been updated since the 24th February.
Whilst I can accept that the release date may not be in Nokia's control, I feel they've shot themselves in the foot by starting out with good comms then letting it drop. In the thread we were promised that the update would be available within 5 days of the dates in the spreadsheet but with those dates being nearly 3 weeks past many of us are still waiting with no (promised) forthcoming information - and no update.
Shame - Nokia seemed to be doing well.

Akuma07 wrote:
You know what the worst thing is though.
NOBODY HAS A CLUE WHAT IS GOING ON AT NOKIA!!!!
I have rang Nokia customer service, I have rang Vodafone customer service. Neither of them have a clue what PR1.1 is!!!!!!!!!!!!!!!!!!!!
NOKIA!!! This whole PR1.1 **bleep** is one of the main reasons why I am SERIOUSLY considering jumping ship. I WANT MY UPDATE NOW.
Nokia Care contact centre staff are only able to help you to know what is the latest version of software for your particular device's product code, they will not be able to tell you when an update will become available - update schedules for Nokia devices, like those for most other major phone manufacturers, are not currently published in advance.
If your device is a Vodafone variant (ie: it has the Vodafone-customised version of the software), then Nokia will only be able to offer the update to you when it receives the approval from Vodafone. Approval for operator-variant software updates is a process undertaken at commercial level between Nokia and the operator concerned, just as Nokia Care staff cannot provide you with advanced scheduling, I doubt that the customer support staff of your operator will have information regarding update schedules for any devices that they offer.
Software updates are phased in due to the wide range of regional, national and network variants. Nobody questions the frustration of customers whose device is not yet able to receive an update that is already available to others, but this is regrettably unavoidable - particularly in the case of operator-variant models.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

N9 PR1.3 update

Hello,
I have a portuguese N9 64GB, product code 059M1L6.
Although in the portuguese nokia site is stated that the current release is the 40.2012.21-3, my phone only has the PR1.2 30.2012.07-1.398.1_PR398.
Is there a schedule for the roll out of PR1.3 or my phone will never have the update?
João

@JLagarto
Pretty sure that there was a recent post from another use whom had given up hope and then pleasantly surprised that PR1.3 had appeared. Warranty considerations apart you are however free to install whatever you want upon this open source device!
Happy to have helped forum with a Support Ratio = 42.5

N9: PR1.1 update using terminal failed

Nokia N9, 16GB black, unbranded, Switzerland
059L5D0, Version 10.2011.34-1.232.2_PR_232 (PR 1.0 I guess)
No PR1.1 using neither using OTA , nor the updater for PC.
Found a post on updating using the terminal (apt-get update), but it fails writing the following code:
~ # apt-get update
Get:1 exec:////usr/bin/osa --packages
Ign https://downloads.maemo.nokia.com ./ Release.gpg
Ign https://downloads.maemo.nokia.com ./ Translation-en_US
Hit https://downloads.maemo.nokia.com ./ Release.gpg
Ign https://downloads.maemo.nokia.com ./ Translation-en_US
Hit https://downloads.maemo.nokia.com ./ Release.gpg
Ign https://downloads.maemo.nokia.com ./ Translation-en_US
Ign https://downloads.maemo.nokia.com ./ Release
Hit https://downloads.maemo.nokia.com ./ Release
Hit https://downloads.maemo.nokia.com ./ Release
Err https://downloads.maemo.nokia.com ./ Packages
The requested URL returned error: 404
Ign https://downloads.maemo.nokia.com ./ Packages/DiffIndex
Ign https://downloads.maemo.nokia.com ./ Packages/DiffIndex
Hit https://downloads.maemo.nokia.com ./ Packages
Hit https://downloads.maemo.nokia.com ./ Packages
Fetched 138kB in 12s (10.7kB/s)
W: Failed to fetch https://downloads.maemo.nokia.com/harmattan/232/./Packages.gz The requested URL returned error: 404
E: Some index files failed to download, they have been ignored, or old ones used instead.
~ #
Any ideas or techie tips to solve this? Thanks

This is brilliant news!! I know Nokia are often quite secretive regarding changes and bug fixes in firmware, but there appears to be a serious issue with a number of 64GB devices (particularly Austrian black 64GB handsets). Serious stability issues, random reboots and app crashes plaguing a number of these devices
Do you know if there might be a fix to address this particular problem?
The N900 suffered a similar random reboot issue just after launch that was completely fixed in the first firmware release (start of 2010). The key thing here is many users are waiting to send back their phones if they are genuinely faulty but at the same time, many will wait to try PR1.1 if it addresses this problem.
Do we know if there have been any stability improvements, particularly targetting Finnish made 64GB models?
I have mine boxed to be sent back to the supplier today (to order again at a later date), if PR1.1 solves the problems I'll definitely hold off and I'm sure a number of other users will too.

N8 PR1.1 update - will i get it?

Hi guys, I've tried to update but there doesn't seem to be a patch. I'm in NZ.
My phone has vodafone branding but does that mean i will need to wait for vodafone to release it?
Phone details:
Release:
PR1.0
Software version
011.012
Software version date
2010-09-18
Custom version
011.012.241.04
Custom version date
2010-10-06
Language set
011.012.18.01
Product code
059C7R0
Model
N8-00
Latest update
Not updated
Browser version
7.2
Flash version
4.0
Java version
2.1
Thanks

j444lh wrote:
Based on past experience I'd say we Kiwi's will have to wait at least a month for Vodafone to get their act together. Hope they prove me wrong.
We haven't got that last App update yet, hopefully they skip it as it's rolled into 1.1 anyway.
Comments I've seen indicate the changes in 1.1 aren't big enough to warrant messing with the Product Code.
YOUR KIDDING ME! YOU GUYS DIDNT GET IT EITHER!
Man that blows! Everyone on Optus got it!
How do you know that Apps Update is rolled into PR1.1?
Hit the white star if I have helped you =]

PR1.3 Update Problem: lost feed

After the update to PR1.3, I lost the feed on the home sceen.
Accuweather is still there, but the rest of the screen is completely black
I check the setting under Notifications > Feed on Home Screen and Twitter is still enabled - as before the udpate.
The twitter app works fine, but the Feed on Home screen is dead
any help would be appriciated
Solved!
Go to Solution.

Hi Ebalaf, can't help you I'm afraid but to say there seems to be a few inconsistoncies with this latest release of 1.3. Maybe people have been installing dodgy software? N9 should be clean of all **bleep**. It's a clever os and would not suffer fools gladly! I am in the UK and have yet to get the fabled 1.3 update. However, what is it anyway? As long as we have the basic ingredients, who cares? Flash it or re install.
Regards,
Gray
gray

N9 PR1.1 update screwed up the phone, address book...

Oh yeah now my facebook and web apps work perfectly BUT this almost completely destroyed my address book and phone apps. Well who would like to add address to address book anyway. Come on! Give me a sw that has the basic functionality working. Maybe I fall back to the older one...
Solved!
Go to Solution.

Almost all the basic apps are now working very badly. Example camera app: I took a picture and it doesn't save the file to the device properly. The other is the address book as I said it let's me open a add new contact page, but when I try to save it the app crashes. The same with cancel saving. So I think I'm going to try to backup everything to my pc and then fall back to the older sw and then run factory settings and then the update and let's see what happens.
I guess there are two possible reasons why this happened. If u can figure put something else please let me know...
1) I don't know if it has to do with my problem but I run the update with the developer mode on.
2) The other option is that I got the device from the Qt developer days and I run the update from Finland. But this affects only if the sw is somehow area dependent

Nokia N9 PR1.1 update: Camera stop to work

Hello,
I've upgraded my Nokia N9 yesterday to PR1.1.
My Camera not work now.
When I see /var/log/syslog, I have this lines:
Nov 9 10:20:06 (2011) applifed[937]: Application 'com.nokia.maemo.CameraService' released from prestarted state, count=1
Nov 9 10:20:07 (2011) camera[2277]: Setting camera pipeline to running state failed.
Nov 9 10:20:07 (2011) wlancond[1009]: Scan issued
Nov 9 10:20:07 (2011) sensord[652]: *WARNING* [../../core/nodebase.cpp:267:bool NodeBase::setIntervalRequest(int, unsigned int)]: Invalid interval requested for node 'compasschain' by session '15': 0
Nov 9 10:20:07 (2011) camera[2277]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter3 failed" , 7
Nov 9 10:20:07 (2011) wlancond[1009]: Scan results ready -- scan active
Nov 9 10:20:07 (2011) wlancond[1009]: Scan results (1 APs) to :1.109
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.418
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.418
Nov 9 10:20:07 (2011) nped[1419]: GLIB DEBUG ConIc - con_ic_connection_connect_by_id(0x188810, [ANY], 1)
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.150
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.150
Nov 9 10:20:09 (2011) camera[2277]: Setting camera pipeline to running state failed.
Nov 9 10:20:10 (2011) camera[2277]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter4 failed" , 7
Nov 9 10:20:10 (2011) sensord[652]: *WARNING* [../../core/nodebase.cpp:267:bool NodeBase::setIntervalRequest(int, unsigned int)]: Invalid interval requested for node 'compasschain' by session '16': 0
I suppose I must disable GPS photo tagging?
Can you help me?
Thanks

I've disabled the geo tagging: gconftool-2 -t string -s /apps/camera-ui/settings/geoLocationEnabled no But the issue still exists. Nov 9 11:00:20 (2011) applifed[936]: 'com.nokia.maemo.CameraService' got registered with pid '1800'.. Nov 9 11:00:25 (2011) applifed[936]: Application 'com.nokia.maemo.CameraService' released from prestarted state, count=1 Nov 9 11:00:28 (2011) camera[1800]: Setting camera pipeline to running state failed. Nov 9 11:00:28 (2011) camera[1800]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter3 failed" , 7 Nov 9 11:00:30 (2011) camera[1800]: Setting camera pipeline to running state failed. Nov 9 11:00:30 (2011) camera[1800]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter4 failed" , 7

Issue coming when a call is made AFTER pr1.3 updat...

hi
I upgraded to PR 1.3 and am facing a issue regarding call whenever there is a incoming call or out going call the screen gets locked and i mannually have to unlock the screen and thn operate.
I cnt even see the proximity sensor working.
Please help me with this issue.
what step shuld i take?
thaknx

There can be problems after the update due to the apps installed before the update.
I had 'custom ringtones per contact' installed previously and after updating, there was no ringtone for any incoming calls. A reinstall of the app fixed it.
Just to be clear I removed some apps such as this one and did a reinstall of the 1.3 update through NSU and restored the apps (some through the auto reinstall and some manually)

Problem with PR1.1 Update

I've just download the update. After the download had completed my N900 rebooted and I get this message :
Installing software update.
Please do not interrupt.
After 1min it reboots again, and I get the same screen again.
I can't connect to my pc to back it up (windows 7 32bit).
Can someone help?
I've tryed connect to my pc and reflash but it keeps rebooting.

hi! can someone please help
see , i held done the u key on my n900 and then conneced it to the computer and i could use flasher mode but now iwhen i do that it doesnt happen how do i fix my phone ??
im using a macbook pro ! please please help me my dad got me this phone and if it doesnt work ill get into big trouble

N9 PR1.2 Update rollout

Similar Messages

Maybe you are looking for