N900 Bluetooth trouble with Peltor WS4

My Peltor WS4 headset has a strange problem, when connected to my Nokia N900.
Periodically it shuts of normal communication and a humming noise appears until I touch the volume button, then the unit returns to normal state for a while,, ( 30-60 sec) then the problem reappear time after time.
Been in contact with Peltor that said the problem with Nokia N900 was known
Hoping to get some help as I really need those excellent headphones
In hope of recovery
PJ Ontrack service

Hello
have you found any solution to the problem. I have the same problem with my 6700slide and peltor alert ws4
/henrik

Similar Messages

Bluetooth Trouble With Mouse and Keyboard

Symptoms of problem: Message indicating that mouse is not connected. Mouse becomes inoperable.
Related clues:
After selecting "Browse Device" from the Menu Bar, Bluetooth icon, drop-down menu, the mouse is listed in the Browse Device window...the keyboard is not listed. The message "Searching for Devices - 0 Found", followed by "Found - 0 Devices" appears every few seconds.
When the Bluetooth icon in the System Preferences is selected, both the mouse and the keyboard are shown to be - On, Discoverable, Paired, and Connected.
There would seen to be nothing interfering with the signal, although I did enable a new 1.9 GHz wireless phone system just prior to experiencing the Mouse trouble.
???

So the first thing that I would do is disable the phone system and see if the issue goes away. If it does you most likely have your answer to the cause. However, BT is supposed to be confined to the license-free ISM band at 2.402-2.480 GHz which would seem to be well away from the phone's frequency.
Dah•veed

Bluetooth trouble with Mac Pro

Hi
I have recently bought a D-Link DBT-120 Bluetooth Adapter for my Mac Pro and i am losing connection with my devices on waking the Mac Pro from sleep, both my Logitech Bluetooth Mouse and a Jabra headset. Typically I need to disconnect and reconnect the adapter before they will work again. Does anyone know what i can do to get this working properly. I get the same issues whether i plug the adapter into the front of the Mac Pro or the back of my Cinema Display which is ideally where i would like to connect it.
thanks
nick

Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe

TS3018 Bluetooth trouble with iPhone 5

My iPhone 5 with iOS 6.1.4 is not connecting to the Bluetooth device JBL Flip portable speaker. Any solutions?

You should really start your own topic since this one is about a video recorder.
In your new post list the make and model of the speaker you are trying to connect with and what you have tried so far.
Sorry, wrong Flip. Is yours a JBL? Is it in discoverable mode? Do you have another device paired with it?
Message was edited by: deggie

I am having trouble with my bluetooth skipping while its playing music from my Itunes music...I thought that this was an antiquated problem with the new technology?

I am having trouble with the music from my bluetooth "skipping" on my IPhone 5. I thought that this was an antiquated problem with the new technology. It's very frustrating to purchase all of this music and expect great sound and playability and get "skipping". Any ideas on how to resolve this issue?

Does the issue occur when listening to the media using the speaker or wired headphones? If it does, the issue is with the media itself.
If it does not, it's likely a bad connection or interference.

Trouble with Bluetooth Devices

I have a MacBook Pro 13" from late-2011. Recently I have decided to use Bluetooth headsets instead of wired earbuds because I tend to forget they are in my ears and when I get up, they are yanked out of my ears, hurting me and potentially pulling my notebook off of something. I had an LG Tone before getting my current Motorola S11-FLEX HD headset. I switched because of the problems I have been having with Bluetooth but switching has not solved the issue.
My biggest problem with my Bluetooth headsets is that the audio stutters and then de-syncs with any video. The de-sync can be as bad as a full second. I'll see the video's actions before I hear them. The de-sync also affects the responsiveness of controls. After I give a command, the audio will continue to play for however long the de-sync is before the command is performed. It's like it's making up for the lost time. The only solution I have come across is turning off the device, then turning it back on but that only works some of the time. Usually, I have to turn it off and then on again two or three times before the de-syncing issue disappears. I have no idea the cause as my LG Tone works to specifications with devices that belong to other people. I have found that moving my head in a certain direction will cause the de-sync. Sometimes, it's leaning back; other times, it's tilting my head. It's as if the Bluetooth field is planar and I'm jumping out of the plane.
Another issue is the distance I can be from my device. My Bluetooth headsets boasts being able to function perfectly as far as 30 feet for one headset but moving even 5 feet will cause the previously mentioned de-syncing if the audio is playing. If I pause the audio, I can move about 10 feet. After I move 10 feet, when I press play, the de-sync appears. It renders the function of being wireless to being useless. I wanted to Bluetooth so I didn't have to pause, take off my device, do what I need to do, and before coming back, putting on the device, and resuming play, hoping that nothing has gone wrong to cause a de-syncing issue.
A third issue I have is that sometimes, while listening to some audio of some kind, another program will make a noise causing the audio to cut out. My notebook or the web browser is not aware that audio is no longer playing. It's as if the new program has muted the original audio. The only cure: turning off the device and turning it on again and hoping it's working.
The last issue I can think of is that when I turn my notebook off for any reason, all Bluetooth devices are forgotten causing me to go through the hassle of repairing the devices again but many times, the repairing process fails and despite being on and not paired to anything else, my notebook is unable to pair unless I turn both the device off and my notebook's Bluetooth off before turning both back on.
Has anyone run into issues like this? If so, does anyone have any recommendations on how to correct the problem? The problem is on my notebook side as the devices work fine with other products. The LG Tone could be used across the house when it was attached to my father's Kindle Fire and when attached to my iPhone 5, I could walk 20 feet with doors and concrete between me and the device before any issues began (both devices had trouble with my iPhone but pausing usually fixes the issue so I don't care). Please, I need some advice and help.

Some details missing.
I have a Pioneer DEH-P7000BT. On telephone settings, everything OK.
When I want to sync to my Audio Bluetooth, I hear the sound in slow motion :-)
I have to delete the Bluetooth device on the radio, and re-syncing on Audio Devices and everything fine.
Same thing all the time.
When I had iOS 3.1.3 on my iPhone 3G, everything was OK.
I can't find Firmware Update for my radio.

Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Trouble with Toshiba bluetooth stack

Hello, I'm having a trouble with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I had a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After upgrading to windows 7 my bluetooth mouse is not working any more and it is not listed in the devices list. But, when I switch my mouse on, the bluetooth stack icon tray turns green like when the device is connected, but it doesn't work and the device is still not listed. I'm trying to redetect it, but it is not detected. I have tried to uninstall and reinstall the bluetooth stack, but in the reinstalation, my devices are still listed.
Anyone can help me or tell me how to remove manually all the attached devices? Thanks in advance.

It seems that the mouse has still stored the pairing information (normally it should loose it if the battery was removed).
The mouse tries to connect to the last connection, but the other side (PC) has not the information anymore.
Could you try to pair the mouse with any other PC or notebook before you try to pair it with your notebook again ?
Furthermore increase the security for this test by enabling the following option:
Right click Bluetooth system tray icon > Options > Security > Custom Level > Mode: Link level enforced security

Has anyone had trouble with their bluetooth headset? (even after pairing)

Has anyone had trouble with their bluetooth headset? I have a Motorola H700 that pairs with the iphone but takes about 10 seconds after i hit send for the connection between the phone and the headset to be established. I also get allot of static when the headset is more than 3 feet away from the phone. (this headset worked perfectly @ about 40' with a Motorola Razr I had)

Hi jmsemac,
I understand you are experiencing some issues with Bluetooth connections. I have linked to an article which provides some troubleshooting steps you may want to explore:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Greetings, I'm having trouble with my iMouse continually disconnecting from my MacBook Pro in Mavericks. The batteries are solid. I just eliminated the bluetooth for my headphone. I have used the mac to cast on my TV. I use bluetooth. ANy ideas?

Greetings, I'm having trouble with my iMouse continually disconnecting from my MacBook Pro in Mavericks. The batteries are solid. I just eliminated the bluetooth for my headphone. I have used the mac to cast on my TV. I use bluetooth. ANy ideas?

Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe

Trouble with Bluetooth device after ios8 update. I have jawbone era HD

Bluetooth trouble since ios8 update. I have a new jawbone eraHD

make it forget the headset
put the headset in discovery / pairing mode
make sure it's not currently connected to another device like a tablet or computer
and re-add it to the phone in settings under bluetooth

Trouble with bluetooth

When trying to send an mp3 file to my phone, the loading bar stops and says "internal error". I can send pictures fine but i need some help with sending mp3 files. Any help would be appriciated, i am a mac newbie.

@dippy19
You have Microsoft OS to thank as only Bluetooth features are "contact transfer" application or ability to use "bluetooth headsets" with your Lumia 800. You can send reduced reolution images by email or need to use "Cloud" storage such as SkyDrive.
Happy to have helped forum with a Support Ratio = 42.5

How do I pair my bluetooth headset with my mac?

Hi, I have trouble pairing my Plantronics M25 bluetooth headset with my Mac and my iMac.
The bluetooth headset pairs with my phone ok (iPhone), but my computers just dont find it.
I have bought additional USB bluetooth stick, but getting the same resutls.
I wonder how can I pair it with my macs?

Ask the headset manufacturer.
Barry

IPhone 6 BlueTooth issues with iOS8

Ok here is my findings:
Tried 2 iPhone 5 units before iOS8 and no issues with Bluetooth (1 I had for 2 years and no issues in my car). Once updating to iOS8 the bluetooth didn't work well at all for phone calls but music connects fine. Strange issues with the unit automatically start dialling but not able to cancel call until you disconnected bluetooth.
Also incoming calls ring but unable to answer and seem to lock up so you have to disconnect bluetooth to hang up.
I tried everything listed in the forums here and what the Apple reps told me. It works for a short while until the phone gets turned off or synced with iTunes. Now I have a new iPhone 6 with iOS 8 and it worked initially before I started setting things up.
I did not restore from a back up, I started as a new phone. Once I installed all my apps (Not in iTunes, rather manually over the air) and changed settings on the phone (not sure if it because of changing settings or turning the phone off) it would not connect to bluetooth in my car anymore, well it does just for music. I have tried my wife's iPhone 5c and it seems to work fine with my bluetooth so it definitely has nothing to do with my vehicle.
Apple there is a definite issue here. Stop telling me and other people to contact my car manufacturer to fix the issue. It all worked fine before iOS 8. Something needs to be done ASAP or I will be returning my phone and jumping ship to an Android or Windows phone as much as that may pain me. I have been a loyal Apple customer for the last 7 years. If this is how you are going to treat me and other loyal customers, you will not keep us for long.
I am hoping someone from Apple is reading this. If so I am expecting to be contacted. We expect a resolution fast!

I had same Bluetooth issues with iOS 8 on my iPhone 6; no phone/no music streaming although showing as "connected" with my 2 vehicles (VW and Audi).
Apple telephone technical support team solved issue with both cars as follows:
1. Delete the phone from handsfree memory in the Bluetooth car settings.
2. "Forget" the handsfree device (car) in the iPhone Bluetooth settings.
3. Reset ALL settings in iPhone (not just network settings)!!
(note: I had to reset ALL settings twice in a row for this to work.)
It worked in both cars! (Hope it stays working.....?)
You will have to reset wallpaper, and most other settings, as well. Certainly worth the trouble to get car Bluetooth up and running properly.
Good luck.

Had trouble with iPhone 2.0 upgrade? CHECK YOUR FILESYSTEM!!

I can't find my original post (deleted?), but when I tried to do the first 2.0 iPhone upgrade the day it came out (BIG MISTAKE), I had a lot of trouble. Thanks to an Apple support person who was kind enough to call me, I deleted a file per his suggestion, which made the backup finish to completion and I was happy.
Or so I thought...
Now, several weeks later, I (or rather our IT guy) has discovered that some of my iPhone backup files were corrupted, which has made a mess out of my Macbook Pro (10.4.11)'s file system. It was not fixable with Disk Utility (in the Utilities Folder of the Application Folder) and only partially fixable with Disk Warrior. Nothing appears to be wrong with the hardware (except that my video port was malfunctioning although that problem had started way before the upgrade.)
If you had trouble with the iPhone 2.0 upgrade, I strongly recommend you verify the integrity of your Mac Filesystem. If there's something wrong, you may need expert help in repairing your file system.

Wingstat,
It should still work fine. I have the original iPhone and Apple BT Headset purchased about a year ago. I upgraded to the new 2.0 software 2 weeks ago. BT Headset works fine.
There has always been the occasional incident when I couldn't get the 2 to pair. This was always solved by un-pairing then re-pairing the two manually. To do this:
With your BT Headset:
Press and hold the headset's button until you here the 4, rapid descending tones
Your headset is now off.
On iPhone:
Open SETTINGS, then GENERAL, then BLUETOOTH
Under DEVICES, tap on the iPhone Bluetooth Headset link and select UNPAIR.
Note: If your headset doesn't show up here... keep going...
Tap on the DEVICES link again to put iPhone in DISCOVERABLE MODE
Back to your Headset:
Click and hold the button again... when you hear 4 ascending tones, keep holding
Keep holding the button until you hear 5 rapid, short beeps
Release the button: you're in DISCOVERABLE MODE here too.
Back to your iPhone:
You should see the Headset appear on your DEVICES list.
It should pop up and ask for Pairing Code
Enter 0000 on the iPhone.
You should be all paired up for good now.
Jim

N900 Bluetooth trouble with Peltor WS4

Similar Messages

Maybe you are looking for