N900 Hard disk not working

Hi,
I had dropped my n900 twice and after the second fall it stopped working.
On giving it for repairs i was told that the hard disk is now corrupt and its not replaceable here.
Right now the phone can on dial and recieve phone calls.
I am not able to recieve or send messages or perform any other action.
The device shows only 60mb memory and even after putting a 2gb memory card no other function works.
Is there any solution to this.
Please help.
Thanks.
Solved!
Go to Solution.

The EMMC is what's called SMT in tech jargon. (Surface Mount Technology) i.e it's soldered to the surface of the board rather than having pins that go through holes. Makes it extremely difficult if not impossible to remount. There's probably someone out there who could resolder it, I've heard rumor of a company that can resolder the USB port when that comes adrift, I'm not sure who it is though. I don't think it's possible to run the O/S from MMC either.

Similar Messages

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

WRT610N New Firmware Upgrade and USB Hard disk not working

Hi, I've just upgraded the new firmware, everything seems fine but now my USB Hard disk is not recognizable unless i restart the router. I have a Seagate FreeAgent 500Gigs, and it worked perfectly with the previous firmware. Just wondering if its just me or anyone else has the same problem.
Thanks
I forgot to add that afterawhile the hard disk isnt recognizable again and i have to reset it to get it working
Message Edited by jellydish on 02-13-2009 06:09 AM

The same thing is happening to me... After the HDD goes to sleep, when you goto access it again you can hear it spin up but you still can't access it at all.

External hard-disk not working with firewire under Snow Leopard

Hi. I have a LaCie d2 external hard-disk that has Firewire 800, 400 and usb2. I previously used it on my old (angle-poise) iMac connecting using the Firewire 400 socket. I've just a got a new mac with Snow Leopard and I thought it would we best to connect to the LaCie with Firewire 800. However when I do this, the disc mounts ok, but browsing in the Finder is really slow and copying files from the disk to the imac seems to work at a really slow rate (less than USB1 speed) if at all ! However, I switched to using the USB2 connection instead and it works like a dream. What gives ? Is Firewire in Snow Leopard buggy ??

There's no problem with the drive.
Maybe true, and the drive would probably work fine with Leopard. One thing that's obvious is that Apple did make changes in the way that FireWire works in Snow Leopard. Many drives and drive manufacturers work well with SL, but there have also been reports of firmware issues by Western Digital and other companies.
Have you checked with your vendor to see if they are offering a firmware update for your drive?
BTW, I got a new FW case a few months ago while at a Fry's electronic store. The brand new USB2 and FW400 cables worked fine. The FW800 cable did not, but another cable came to the rescue. Just saying...

External hard disk not working

Hi, i have a hard disk that is connected via usb. It worked recently and still does on a PC but not accessible or even showing in iMac. Anybody know what i have to do to get it working again?

How is the disk formatted and has it ever worked on your iMac? I suspect it's formatted for the PC as NTFS which OS X will read but not write to. If you must share this disk with both your PC and Mac then you should first determine how it's formatted and if it can be shared. In the event it's formatted as most external HD's for NTFS then I'd recommend downloading and installing NTFS-3G will allow the Mac to write to it. You can find this at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If it's a simple matter of not being seen by the Mac then try resetting the SMC, don't be afraid to reset it 2-3x if the first time doesn't work.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HARD DISK NOT WORKING AFTER MOTHER BOARD REPLACEMENT

Mother board of my laptop had to be replaced. meanwhile i had used hard disk from my laptop as external hard disk without formatting. After replacement of motherboard i have reconnected the same hard disk without formatting. but system does not boot up to operating system.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Grey Screen on Start up and Hard disk not working

Hi , I was working and suddenly some popping noises came out of the hard drive. I tried to save my work but i couldn't because it got "stuck". I had to turn it off and when I restarted a grey screen appeared without the apple logo. It won't start up and starting from cd, safe mode, single user mode don't work. I reset the PRAM too and nothing works. I'm worried about recovering the data... what should I do? I have work there that i need!!!
thanks

thanks for your reply. I took my powerbook to 2 apple authorized technical service and both of them told me that they couldn't get the data using disk warrior.
I already removed the hard drive and replace it with a new one. However I still want to recover data. I plug the hard drive to my home powermac with a usb connector and using disk utility and terminal i was able to "see" the drive but not mount it. In disk utility the drive appears as 0 bytes.
I want to try using Terminal or Single user mode to mount the hard drive, and/or repair it and try to recover some important files that I urgently need. Do you know how?

Hard disk stop working how can recovery may new hard disk on mac book pro and i not have recovery disk the recovery is installed in soped hard disk

i have macbook pro the recovery is in hard disk and not have recovery disk and hard disk stop working now i want to change hard disk but how can i recovery my macbook pro can help me ?

"it shows macintosh HD OSX 10.9.5 but the hard drive that is supposed to be in the upper right corner is not showing up. So it is booting from that drive."
Ok go to "Finder" preferences and make sure the "Hard disk" box is checked.
That will make your boot disk show up in the upper right corner. You can tell it's a boot disk because all the files will look like this instead of just being blank files.

Hard Disk Not Exist help please

Hi, not sure if this should be in Recovery or Hardware or Operating Systems as it involves all three!
I have an HP G61-110SA running Win 7 64 bit; product no. VR523EA. Also have serial no if needed. One problem is, as the laptop is 6 years old, it's hard to remember what came with it.
Whilst using on Thursday it suddenly froze and ctrl/alt/del didn't respond so i held down the power key to turn off. When I rebooted, I got "PXE-E61 Media Test failure; check cable. PXE-M0F: Exiting PXE ROM. No bootable device -- insert boot disc and press any key".
I don't have a boot disc as the OS came preinstalled. So here's what I've tried so far by reading other similar problems in here.
- Ive taken out the HDD and reseated it. Reboot then said Hard Disk Not Exist. Tried reseating again. Same message.
- Created a bootable Ubuntu CD and ran that - no response.
- Created a Ubuntu bootable USB and that has worked except Ubuntu isn't showing the HDD so I can't retrieve anything.
I can however connect my wireless network and at least use Ubuntu in the meantime.
I've ordered a new (same) replacement HDD (a Hitachi 320GB 2.5"). So next problem is how to reinstall Windows 7 without a recovery CD? Did the old HDD contain the recovery partition drive or would that be located elsewhere thefore still be accessible when the new HDD is installed?
If not, I'm assuming I can still purchase recovery discs from HP? I know I should be able to create my own recovery discs however, the MS sticker on the bottom of my laptop beside the laptop details, has become too faded to read the important bits! All I can see is "Proof of License, Certificate of Authenticity, Microsoft Corporation 2005" and "Label not to be sold seperately". Any letters/numbers are long gone. So would I be able to find these any other way? My friend (an IT Manager) said something about DBAN being able to read all that from the HDD but not if it's fried?!
Next problem - I was also using Office 2007 (think it was Home Premium). Either this came preinstalled (unlikely?) OR it came with a 30 day trial which I could purchase the full version & download the full version from online using a link within the trial? I think this is what I did because I have no other way of obtaining Office for Windows 7 and yet whatever version I had, had about 3 user licenses because I also installed it on my son's netbook. I do have Office XP discs for my previous desktop PC (but couldn't have used those surely on Win7)?
And just to add a gripe .... although I certainly got my money's worth out of my old laptop, I'll now have to buy a new one - which I consider a treat - BUT I'm choking at the expense of replacing all the software I need! Anything I buy new will be Windows 8 which none of my old software was compatable with - same as when I have to previously rebuy it because none of my XP software was compatable with Win7! But on the plus side, I'm assuming if I install my new HDD on my old lappy, I can also install Ubuntu to the new HDD so at least my 11yr old son can browse and surf on it via Ubuntu.
Can anyone answer/help with any of the above problems? Many thanks in advance.
This question was solved.
View Solution.

You do not need the license key when using HP Recovery Discs.If you didn't create a Recovery Disk set using the software installed on the laptop refer to the article here>> Looking for Recovery Discs?
If you have difficulty, contact HP in your country / region through the HP Worldwide Support Portal to check on the availability of Recovery Discs for your computer.> Worldwide Support Portal
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hard disk Not found Error

My computer suddenly after working properly the day before, started displaying an error that says hard disk Not found. It is not booting up to windows aince the hard disk has been disconnected in some way. It is still under the hp manufacturers warranty till auguat of 2015, so would I be able to send it in for either a device replacement or a service order to correct the error. Also there is a small crack in the body near the charging port, but that is from a drop from eariler. Please get back to me as soon as possible, my son needs to use this for his computer science class.

You should contact HP directly to arrange to have the notebook sent in for warranty repair.
Use one of the contact options described in the web page at the following URL.
https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-13-a000-x360-Convertible-PC/6936239/mode...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hard Disk not exist! But spins up ok

Hey guys, I've got a HP Pavilion DV5 1000ea, which is just over 2 years old. For the last week I've frequently had a lot of trouble booting up, it seems like the hard drive isn't being recognised. I get a message saying that there's no boot device detected, and when I try to do a hard drive self test I get a "Hard Disk Not Exist" error message. At one of these two error message points I also get an error code of (3F0).
Now, I have tried taking the hard drive out of the laptop, reseating the connections both on the back of the hard drive and on the motherboard, and booting up while the hard drive is laying flat in the palm of my hand. I can feel it spin up fine, it doesn't seem to make any clicking noises like a dying hard drive might, I can even hear it reading the hard drive very briefly once or twice - but I'm still being told the hard drive doesn't exist! On boot up, the "hard disk access" LED on the laptop comes on solid for a few seconds, then goes off, and then maybe flickers on and off briefly once or twice (all while on the HP splash screen) before giving me the error. I should possibly also mention that the label on top of the hard drive looks a bit scorched, I presume that's from the heat generated from the wifi card situated beneath it.
So the short of it is, this is happening almost every time i try to boot up my laptop now. Sometimes I have to try booting up 10-15 times, but so far it has eventually always recognised the hard drive and booted up and worked perfectly fine with no issues in operation. I just feel that at this stage it's likely that someday the laptop isn't going to boot up at all.
I'm happy to replace the hard drive if that's going to sort the problem, but since it spins up fine every time with no clicking noises whether the laptop recognises it or not, I wonder if that's really what the problem is. Could it be a faulty cable between the drive and mobo? Could it be a problem on the mobo itself?
Would greatly appreciate any assistance!
Thanks in advance!
johoro

Think horses not zebras. Not every hard drive error results in clicking. You likely have an issue with the electronic circuitry of the drive, not the mechanical parts, i.e. seek head or platters. A replacement green board would likely fix it but it is much easier to find a new hard drive. Am I 100% sure? No but I am 92% sure.

Hard disk not detected by bios

Hi, I have a CQ50-107NR and when press the power button the hard drive light indicator is flashing, but the bios or windows does not detect the hard disk, I have tried several hard disk that work in my other computers, I have been reparing pcs for more than 15 years and am very stumped by this problem. In my experience if the hard drive indicator is blinking that indicates that the laptop has detected it. But for this one not to detect it is confussing. I am repaing the laptop for someone, had to fix a problem with it over heating. If anyone has any ideas on this or had a similar problem please let me know.

It is not that uncommon on that series of laptops with AMD processor and nVidia GeForce graphics. The laptop is a close cousin of the dv6000 series which had a lot of issues back in the 2008 time frame. The chips on the motherboard will not keep a complete connection due to manufacturing flaws and it shows up as disappearing peripherals or dead video. Wireless cards, hard drives, optical drives all can stop working. The only fix is a motherboard repair or replacement.

HP Pavilion dv6 1328sl, bios says : hard disk not exist !

Good morning,
the bios says that the hard disk not exist. Still, if I boot the PC from CD with Linux, the files on the disk c can be seen .. I deleted the partition but the problem remains!
does anyone know how to access the advanced menu of the bios? It's an "Insyde" f36. I want to see if there is something wrong option ...
Thanx

Try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Boot device not found. "Hard disk not exist". windows not booting

Product: HP G72-110SA
OS: Win7
two days ago, I was installing updates on my computer and when it was about to restart, it froze. After waiting for 10 minutes, I had to turn it off by pressing the off button. From then on, the computer turns on but shows a message "Boot device not found".
I have tried all the BIOS tests that I could find on the net for the hard disk, eg: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443465&tmp_task=solveCategory&cc=uk&dlc=en&la...
This gives me a "Hard disk not exist" error. I tried resetting the BIOS, that didn't work. I tried taking out and putting back in the battery, the memory and the hard disk. Still no luck.
I then booted ubuntu from cd on the computer. It works just fine, including the internet etc EXCEPT the HDD is still not detected.
I had some pretty important stuff and no back up, so would appreciate if someone can help me get back the data. If not, even if I know its just a HDD failure and not a motherboard/BIOS problem, it will be a relief as its probably fixable.
Thanks

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number. (How Do I Find My Model Number or Product Number?) When I went to www.hp.com/go/techcenter/startup, it gave me documentation and troubleshooting steps to follow. One of the documents it provided is called Hard Disk Error Displays before the Computer Starts. NOTE: I recommend at this point you make an immediate backup of all important data and files. Here are instructions on how to Backing Up Your Files (Windows 8). Please follow the troubleshooting steps provided, re-post with the results of the troubleshooting in detail. Thank you.

Boot device not found, hard disk not exist.... does that mean my computer is dead?

Suspecting that Im in a world of hurt here. I tried turning on my computer and it says "boot device not found" - run in test failed... when I hit F4 and run a hard disk test it says "hard disk not exist". The memory test passes, but under the boot device not found it says in blue "please install an operating system on your hard disk"... and to make matters worse it's making some funny noises when it tries to boot.
Is there any hope at all that this computer will work again? Is there any chance that any of the things I had on my hard disk can be recovered?
This question was solved.
View Solution.

You're very welcome, Jonathan.
dv5 still isn't enough info for me to provide the service manual (in case there are differerent ones for the different dv5 models).
However here is the link to the service manual I randomly pulled.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01550108/c01550108.pdf
Assume it is safe to say all dv5 models come with SATA notebook drives.
So, if you want to spring for $15, you can get this enclosure which apparently has very good reviews.
http://www.newegg.com/Product/Product.aspx?Item=N82E16817182138
From what you are describing (noise and stuff), I would say you don't have much of a chance to recover data but that is up to you if you want to try the enclosure or not.
Here is what I recommend:
Yank the hard drive, and power on the notebook.
If the odd noise you heard is gone, then you can pretty much safely assume the drive was the cause, and that replacing the drive, and reinstalling the operating system will solve the issue.
If the noise is still there, then there could be another issue, and it might be risky throwing good money after bad.
Paul

N900 Hard disk not working

Similar Messages

Maybe you are looking for