N900 msgs not showing
hi frnds plz help me. i have new N900. but there is a problem in it thatin conversation menu, as i open any msg. its show just blank .
(means opns but nothing to show any content of msg)
plz help m in trouble
rgds
Mohit
Hi,
I'm pretty pleased with my new acquisition, however am flummoxed by the above - I text regularly, and it seems that all the messages from about a month ago, from when I first got the phone, no longer appear on the conversations list - they get curtailed. The only way to resurrect old conversations is to send a message to the "disappeared" user again, which then leads to the whole conversation reappearing at the top of the list.
Does the SMS app have a flaw where it can only display a certain number of conversations in the list? Clearly the data is still there, for if I send a message to a very old conversation that is no longer displaying on the list, the whole discussion reappears as if by magic -- it's just that the phone refuses to show if there has been no activity on that thread for a while.
How can one adjust the settings so that all conversations remain visible on the list + the phone doesn't curtail old ones from view?
Thanks
Similar Messages
-
My N900 is not showing Network signal
I have been using my N900 since last 13 months everything was working fine. Suddenly it stopped showing network signal. I took it to nokia care they looked at it and I dont know what updates they did. They changed some ICs and charged me heavily but still they couldn't fix it. They assume its due to some issue in motherboard. Now my warranty has lapsed they are asking very huge amount to fix the issue. People always advised me not to buy costly nokia phones as their quality is very inferior. Nokia has really made a fool of me by selling such a substandard hardware. I should have bought Iphone atleast my money won't have gone waste.
now this can be a stupid icons problem, enable devels and install powatool and check for "connui cellular" in the statusbar options, check it and uncheck it and retry ........
and try this : install theme customizer, and the symbian-anna icon pack (or any icon pack that changes the signal bars icons) change the icons and reboot .
and finally can you type this command in x-terminal : dbus-send --system --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_signal_strength | awk 'NR==3 {print "-"$2" dBm"}'
and than click enter , take a screenshot (ctrl+shift+p) and post it here .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos -
Splash Screen Msg not showing immediately??
Hi
A splash screen with a msg is displayed after the edited
cell values of a JTable are being sent to the database
for updation,till the database responds with a msg of
success or failure.
This is to let the general user know that an updation is
in progress.
MY PROBLEM IS
Only the splash window with a blue background is displayed
with no msg in it.Only after the database displayes the
msg does the splash screen msg appear.
MY CODE is
public void setValueAt(Object new_value,int row,int col)
strf[row][col] = new_value.toString();
((AbstractTableModel)th.getModel()).fireTableCellUpdated(row,col);
int selec = JOptionPane.showConfirmDialog(null,"Save
changes " ,"Table Name",
JOptionPane.YES_NO_OPTION);
if(selec == 0) // YES OPTION
// Here only a blue window is displayed with no msg in it?????
SplashWindow sw = new SplashWindow("Please Wait" , null );
try
{ // Call a file that commits the changes to the database..
new set_di_details(param1,param2,.....);
catch(java.sql.SQLException)
sw.dispose(); // Dispose the splash screen.
else if( selec == 1) // NO OPTION
// Do not commit
MY SPLASH SCREEN CODE IS
import javax.swing.*;
import java.awt.*;
public class SplashWindow extends JWindow
public SplashWindow(String msg, Frame f)
super(f);
JLabel l = new JLabel(new String(msg));
l.setFont(new Font("Courier",Font.ITALIC,16));
getContentPane().add(l, BorderLayout.CENTER);
pack();
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
Dimension labelSize = l.getPreferredSize();
setLocation(screenSize.width/2-(labelSize.width/2),screenSize.height/2-(labelSize.height/2));
setVisible(true);
public static void main(String args[])
SplashWindow sw = new SplashWindow(" Set is applied... ",null);
}You need to read this section from the Swing tutorial on "Threads and Swing":
http://java.sun.com/docs/books/tutorial/uiswing/mini/threads.html
Basically, the Database access it being done using the same thread as the GUI would use to paint the splash screen, so the screen can't be repainted until the database access is finished.
Solution, the database access need to run in a separate thread. -
N900 - Emails not shown correctly
Mails received via a POP3 account configured on my N900 do not show up correctly as paragraphs containing Danish characters (æ, ø and å) are displayed as Japanese. Any suggestions for a fix?
Is it all e-mails from all people? Certain people? Certain e-mail domains? If you look at the same mail message on a pc or via a web browser are the characters bad?
It may be rendering the e-mail correctly. It might be that a mail relay server that the mail is going through does not support that mime type.
Check the mail header for the MIME type
Message Edited by DrEJV on 20-Jan-2010 02:41 PM -
Hi all ,
in my communication channel when i press message id it is just opening audit log only not showing any other details like payload
msg is processed
regadrs
sivaramarajuHi,
do you see any more details on message monitoring in RWB ?
maybe it's a sync message and the logging is not turned on ?
if you need to turn logging on for sync message please check out the blogs - several of them are discussing it
Regards,
Michal Krawczyk -
1. Installed maps on Nokia N900 not showing - 2. k...
Although I have installed local maps dae through nokia maploader to Nokia N900, when I start the Map app on the phone the data is missind. Instead it downloades it from internet.
I must clarify that if I reset the phone by reupdating the software the map data is working but as soon I reinstall the various apps I have , the local map date is not showing.
Any idea which app might get in the way?
Second question, regardless of my settings, the map app connect to internet. Every few minutes it asks me to connnect although I have disabled the automatic connections.tanago wrote:
By the way where are the links to every map data version?
As predominantly a Mac user I have published links to a variety of map series upon the forum, but now there is very little demand except perhaps from users in India with 5230 without WiFi and high data downloading costs. As Mac support fairly sparse moderators have kindly allowed discussion of manual installation of map data, which should not be an issue for Windows users with Nokia Suite.
Unfortunately the latest map data only appears to be available for Windows Phone 8 devices and that for Symbian ones will probably fall further behind in future.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Some 'in msg' photos not showing
a target=_blank href="postimages/origimage_1_3137624.jpg"><img border=0 src="postimages/image_1_3137624.jpg"></a> not working in FF 7.01.
Images not showing upI'm using FF 7.01 and it isn't - that is - not in the original thread. Maybe something wrong with my FF add-ons but I checked those best that I could.
-
Please show this query, data not showing why?
I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon -
Calendar Widget Not Showing Upcoming Events
I've upgraded to the latest N900 firmware (pr1.2) and ever since I have had a problem with the calendar widget. All the events are contained in the calendar when I open it however they are not displayed on the desktop widget.
I've got events loaded for the month of June but for some reason these are not showing. Instead I have events showing for July, September and even December. I've tried removing all the entries and the re-adding them but this hasn't solved the problem. I also created another calendar and placed the entries in the new one, again this didn't work.
Does anybody have any idea how I can resolve this problem.I have exactly the same problem with the Calendar Widget not showing all upcoming events. It will show events way in the future but skip events inbetween. I've tried all day with PC Suite 7.1 and Outlook 2007 and some freshly entered events come across for unknown reasons whilst others do not. No amount of changing local entries to synchronized ones, deleting all calendar info from the phone and re-syncing by USB cable or Bluetooth solves the problem.
It worked fine before and, as you say, corresponds with the recent n900 software update.
I SINCERELY HOPE NOKIA READ THESE BULLETIN BOARDS.
Also, why isn't there a fully compatible PC Suite or Ovi Suite for the n900? I have a PC running Windows 7 and Nokia have told me in the past that they do not have a fully functional, compatible PC/Ovi Suite for Windows 7 and the n900.
IF ANYONE CAN HELP I WOULD GREATLY APPRECIATE IT -
Server app task list not showing up!
All of a sudden when I try connecting to my Macpro server locally using the Server app. I connect (no error msg's) but the dialog box with the setup boxes, views, task ..etc is not showing up. When I look at the view on menu bar all the features are greyed out. The only thing showing up is "hide accounts'. Working fine couple of days ago, no changes were made Any idea?
Thanks everyone for the replies. Here is how I corrected the problem. I deleted and installed a fresh Server app, so now I was able to connect and view my profiles, Noticed in the "Alerts" window that my localhost IP has changed from the original one I used to setup the server. I normally use DHCP with manual i/p. The other night I played around with network addressing and changed to DHCP. That's when my problem started. All is good now and again thanks for quick response!
-
Messages typed on phone not showing in online messages?
When I type a text on my phone and go online to review discussion, some of the msgs are not showing up. Also, when I type a text from online there not showing on phone, aren't these suppose to sync?
i am using a macbook and using the address book program with the OS
i ended up buying PhoneView and just getting the missing contacts off the phone then resyncing the phone and replacing all the contacts
they are all in my phone twice under the search for some reason but i am not really caring at this point cause i have them all back where they belong
i could use some help in trying to get rid of the doubles in spotlight
and some insight into what the **** happened -
Stock not showing properly in for Batch determination
Dear Gurus,
While doing the following msg appearing since JAN 01, 2008, IN BATCH DETERMINATION THE SYSTEM NOT SHOWING EXACT QUANTITY AS IN ACTUAL STOCK
Pls help for this issue,
Regards,
AtulDear Jagdish,
In MMBE in unrestricted use column there is total 16.979 stock position is there and again for posting ( PGI ) after delivery for selecting batch determination Available Qty is showing 9,999,999,999.000
How I will correct it could not understand.
Regards,
Atul -
Tables not showing in a new Database created using CREATE DATABASE command
Hi there! I've created a database using "Script Database As" in SSMS. Here's the code generated:
USE [master]
GO
/****** Object: Database [PLMAINDB] Script Date: 08/22/2014 11:25:44 ******/
CREATE DATABASE [PLTESTDB] ON PRIMARY
( NAME = N'CLIENTSPRIME_Data', FILENAME = N'C:\TEMPDB\CLP_Data.mdf' , SIZE = 217472KB , MAXSIZE = UNLIMITED, FILEGROWTH = 10%)
LOG ON
( NAME = N'CLIENTSPRIME_Log', FILENAME = N'C:\TEMPDB\CLP_Data.ldf' , SIZE = 1024KB , MAXSIZE = UNLIMITED, FILEGROWTH = 10%)
GO
ALTER DATABASE [PLMAINDB] SET COMPATIBILITY_LEVEL = 80
GO
IF (1 = FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'))
begin
EXEC [PLMAINDB].[dbo].[sp_fulltext_database] @action = 'disable'
end
GO
ALTER DATABASE [PLTESTDB] SET ANSI_NULL_DEFAULT OFF
GO
ALTER DATABASE [PLTESTDB] SET ANSI_NULLS OFF
GO
ALTER DATABASE [PLTESTDB] SET ANSI_PADDING OFF
GO
ALTER DATABASE [PLTESTDB] SET ANSI_WARNINGS OFF
GO
ALTER DATABASE [PLTESTDB] SET ARITHABORT ON
GO
ALTER DATABASE [PLTESTDB] SET AUTO_CLOSE ON
GO
ALTER DATABASE [PLTESTDB] SET AUTO_CREATE_STATISTICS ON
GO
ALTER DATABASE [PLTESTDB] SET AUTO_SHRINK ON
GO
ALTER DATABASE [PLTESTDB] SET AUTO_UPDATE_STATISTICS ON
GO
ALTER DATABASE [PLTESTDB] SET CURSOR_CLOSE_ON_COMMIT OFF
GO
ALTER DATABASE [PLTESTDB] SET CURSOR_DEFAULT GLOBAL
GO
ALTER DATABASE [PLTESTDB] SET CONCAT_NULL_YIELDS_NULL OFF
GO
ALTER DATABASE [PLTESTDB] SET NUMERIC_ROUNDABORT OFF
GO
ALTER DATABASE [PLTESTDB] SET QUOTED_IDENTIFIER OFF
GO
ALTER DATABASE [PLTESTDB] SET RECURSIVE_TRIGGERS OFF
GO
ALTER DATABASE [PLTESTDB] SET DISABLE_BROKER
GO
ALTER DATABASE [PLTESTDB] SET AUTO_UPDATE_STATISTICS_ASYNC OFF
GO
ALTER DATABASE [PLTESTDB] SET DATE_CORRELATION_OPTIMIZATION OFF
GO
ALTER DATABASE [PLTESTDB] SET TRUSTWORTHY OFF
GO
ALTER DATABASE [PLTESTDB] SET ALLOW_SNAPSHOT_ISOLATION OFF
GO
ALTER DATABASE [PLTESTDB] SET PARAMETERIZATION SIMPLE
GO
ALTER DATABASE [PLTESTDB] SET READ_COMMITTED_SNAPSHOT OFF
GO
ALTER DATABASE [PLTESTDB] SET HONOR_BROKER_PRIORITY OFF
GO
ALTER DATABASE [PLTESTDB] SET READ_WRITE
GO
ALTER DATABASE [PLTESTDB] SET RECOVERY FULL
GO
ALTER DATABASE [PLTESTDB] SET MULTI_USER
GO
ALTER DATABASE [PLTESTDB] SET PAGE_VERIFY TORN_PAGE_DETECTION
GO
ALTER DATABASE [PLTESTDB] SET DB_CHAINING OFF
GO
The mdf and ldf files for PLTESTDB were created successfully. The issue I'm having is that tables are not showing when under PLTESTDB. I've searched online and most answers point to Permission issue. I already added user with the ff. database roles
db_owner
db_reader
db_writer
But even after refreshing or even closing relaunching SSMS, i could not see any table under PLTESTDB. I've spent a lot of time already on this but can't find the fix. I might be missing something here. I tried it on another computer but same issue
persists.
Any ideas or suggestions on how to get this resolved are highly appreciated! Thanks in advance.
Bong RoblesYou're right Olaf! The above script is only for creating DB and not tables. I should have done further reading. I tried now generating scripts for all objects and I got the ff. error:
Msg 207, Level 16, State 1, Procedure CallbackFormViewUpdateCommand, Line 38
Invalid column name 'upsizets'.
Msg 207, Level 16, State 1, Procedure CallbackFormViewInsertCommand, Line 37
Invalid column name 'upsizets'.
Msg 207, Level 16, State 1, Procedure CallbackFormViewInsertCommand, Line 39
Invalid column name 'upsizets'.
Msg 1018, Level 15, State 1, Procedure GrabCounterUpdate, Line 7
Incorrect syntax near 'holdlock'. If this is intended as a part of a table hint, A WITH keyword and parenthesis are now required. See SQL Server Books Online for proper syntax.
Msg 1018, Level 15, State 1, Procedure GrabCounterAllUpdate, Line 7
Incorrect syntax near 'holdlock'. If this is intended as a part of a table hint, A WITH keyword and I parenthesis are now required. See SQL Server Books Online for proper syntax.
I'm working on fixing the errors now. I think I can handle this now.
Really appreciate your quick help. Thanks!
Bong Robles
I think script is having reference to a column which doesnt exist
But unless we see script we will not able to understand the exact reason
Can you post script?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
LSMW - Read Data not showing in Converted Data
Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PMHI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem -
Tables not showing in DB Expert - option selected
Post Author: Clogix
CA Forum: Data Connectivity and SQL
Crystal XI R2 - Even though the option to show tables is selected, they do not show up for a SQL database. OK in our Crystal 10 but not in XI. Does anyone have a resolution?You're right Olaf! The above script is only for creating DB and not tables. I should have done further reading. I tried now generating scripts for all objects and I got the ff. error:
Msg 207, Level 16, State 1, Procedure CallbackFormViewUpdateCommand, Line 38
Invalid column name 'upsizets'.
Msg 207, Level 16, State 1, Procedure CallbackFormViewInsertCommand, Line 37
Invalid column name 'upsizets'.
Msg 207, Level 16, State 1, Procedure CallbackFormViewInsertCommand, Line 39
Invalid column name 'upsizets'.
Msg 1018, Level 15, State 1, Procedure GrabCounterUpdate, Line 7
Incorrect syntax near 'holdlock'. If this is intended as a part of a table hint, A WITH keyword and parenthesis are now required. See SQL Server Books Online for proper syntax.
Msg 1018, Level 15, State 1, Procedure GrabCounterAllUpdate, Line 7
Incorrect syntax near 'holdlock'. If this is intended as a part of a table hint, A WITH keyword and I parenthesis are now required. See SQL Server Books Online for proper syntax.
I'm working on fixing the errors now. I think I can handle this now.
Really appreciate your quick help. Thanks!
Bong Robles
I think script is having reference to a column which doesnt exist
But unless we see script we will not able to understand the exact reason
Can you post script?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Maybe you are looking for
-
How can I move photos from my windows7 pc to my iphone?
Is there any way Without using iTunes that I can move photos from my windows 7 pc to my iphone 5c? (I don't want to use iTunes because I've had too much touble doing that, with duplicate photos being created on my iphone etc, and then you can't move
-
Archiving using PBS Function modules
Hi All, I am converting existing report to archiving reports. For that I am using <b>PBS Commands FUNCTION MODULES</b>. . ie function module like <b>'/PBS/SELECT_INTO_TABLE'</b> Can any one send some documents related PBS and how to use these command
-
I am making a card game....
and using Swing for the graphics. First, thanks to all for reading my post and for their help. My problem, is, I can display hands that should be oriented horizontally (North/South, for example) correctly, but I am having difficulties displaying hand
-
MAC BOOK PRO WITH REMOVABLE BATTERY DOES NOT REBOOT
Every time I turn on my mac boo pro , a message appears in the screen saying "you need to restart your computer". Every time I restart my mac it takes me to the same message. I tried to remove the battery and try again and nothing. What can I do??
-
does anyone have an idea about that?? thanks!!