N900 needs more optimizing (slow/stutter/freeze)

I've recently fully re flashed my phone but it's still so slow to use
And it's really annoying to listen music when it just randomly stutters/stops/clips.
I tried HTC desire yesterday and darn it was so fast no jaggyness at all I cant even get 5 days uptime of my phone and it will already get so slow and choppy.
I dont have extras-devel enabled nor do I run any experimental software, I wonder what gives and if it can be fixed?
Also, where can people send stuff that really does get trough to Nokia and the developers? Submitting a ticket? They really need to get this stuff straight.
Does everyone else experience this?

metallikettu wrote:
I've recently fully re flashed my phone but it's still so slow to use
And it's really annoying to listen music when it just randomly stutters/stops/clips.
I tried HTC desire yesterday and darn it was so fast no jaggyness at all I cant even get 5 days uptime of my phone and it will already get so slow and choppy.
I dont have extras-devel enabled nor do I run any experimental software, I wonder what gives and if it can be fixed?
Also, where can people send stuff that really does get trough to Nokia and the developers? Submitting a ticket? They really need to get this stuff straight.
Does everyone else experience this?
First and foremost, the speed of a CPU doesn't necessarily mean faster performance. AMD proved that with their AMD/64 range of CPUs. They trounced the Intels of the same clock speeds.
Secondly, where was the HTC Desire located, on a shop shelf?
Chances are the HTC would slow down after a few days without a reboot. It's one of the bugbears of mobile devices, specially the N900, that they don't enjoy the same memory management of their larger desktop counterparts. No swap file to use means that anything that isn't shut down completely is hogging vital resources until you reboot the device.
Part of the N900 problem is the transitions, where you go from one screen to another or navigate the menus with a nice blurry whoosh.
These transitions can be edited with a little app called "Transition Control", they can be reduced to speed things up or increased to to give a more pronounced effect.
But if your N900 is so slow that it's just about usable then you obviously have a problem in that something is hogging the CPU, which then needs further attention.

Similar Messages

2010 Macbook pro is running slow in Mavericks. Do I need more than 4gb ram?

My late 2010 13" 2.4Ghz Intel Core 2 Duo Macbook Pro is running slow since upgrading to Mavericks. I currently only have 4gb of ram. When I boot up It takes quite awhile (nearly 5 minutes or more) before the system is usable. Or it takes almost as long to switch to another user. Once I let it sit, it runs fine. I'm mostly using Safari and possibly MS Word at any given time. I looked at the Activity monitor and I believe I'm using aboiut 3.6 - 3.9gb of physical memory and over 4gb of virtual memory. Swap is using 0 at all times.
Do I need more RAM? Wipe my drive and do a fresh install? I'm reluctant to do the latter, because I don't want to have to reinstall all of my apps (even witha TM backup).
Thanks all

Thanks Linc for any help-
Hope I didn't paste too much. Uninstalling CleanMyMac has already helped some. Here goes:
2/3/14 12:14:36.075 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.076 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.083 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.084 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.085 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.085 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.152 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.152 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.153 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.153 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.346 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x2fd] flags: 0x8 binding: FileInfoBinding [0x48b] - extension: jpg, UTI: public.jpeg, fileType: ????.
2/3/14 12:14:36.349 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:48 scale: 1
2/3/14 12:14:40.061 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x231] flags: 0x8 binding: FileInfoBinding [0x3e1] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
2/3/14 12:14:40.062 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:48 scale: 1
2/3/14 12:14:40.883 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x3fb] flags: 0x8 binding: FileInfoBinding [0x15f] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
2/3/14 12:14:40.884 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:48 scale: 1
2/3/14 12:14:42.496 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x191] flags: 0x8 binding: FileInfoBinding [0x409] - extension: xls, UTI: com.microsoft.excel.xls, fileType: ????.
2/3/14 12:14:42.555 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: xls, UTI: com.microsoft.excel.xls, fileType: ???? request size:48 scale: 1
2/3/14 12:14:42.799 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x281] flags: 0x8 binding: FileInfoBinding [0x32f] - extension: doc, UTI: com.microsoft.word.doc, fileType: W8BN.
2/3/14 12:14:42.926 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: doc, UTI: com.microsoft.word.doc, fileType: W8BN request size:48 scale: 1
2/3/14 12:14:46.228 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x51b] flags: 0x8 binding: FileInfoBinding [0x343] - extension: htm, UTI: public.html, fileType: TEXT.
2/3/14 12:14:46.229 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xc03] flags: 0x8 binding: FileInfoBinding [0xb03] - extension: htm, UTI: public.html, fileType: TEXT request size:48 scale: 1
2/3/14 12:14:46.756 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x51f] flags: 0x8 binding: FileInfoBinding [0x299] - extension: xml, UTI: public.xml, fileType: TEXT.
2/3/14 12:14:46.762 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xe03] flags: 0x8 binding: FileInfoBinding [0xd03] - extension: xml, UTI: public.xml, fileType: TEXT request size:48 scale: 1
2/3/14 12:14:59.191 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:14:59.321 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:15:00.358 AM WindowServer[141]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
2/3/14 12:15:01.036 AM WindowServer[141]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.68 seconds (server forcibly re-enabled them after 1.00 seconds)
2/3/14 12:15:36.961 AM NetAuthSysAgent[447]: handleStreamError: stream error domain: posix error: 60
2/3/14 12:15:50.059 AM SecurityAgent[470]: MacBuddy was run = 0
2/3/14 12:15:50.123 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:15:52.153 AM parentalcontrolsd[475]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/3/14 12:15:52.733 AM SecurityAgent[470]: User info context values set for JASON
2/3/14 12:15:52.983 AM SecurityAgent[470]: Login Window login proceeding
2/3/14 12:15:53.237 AM sandboxd[101]: ([474]) storeagent(474) deny file-read-data /Users/JANINE/Library/Preferences/com.apple.WebFoundation.plist
2/3/14 12:15:53.244 AM WindowServer[141]: Session 256 is switching to console
2/3/14 12:15:53.255 AM Dock[397]: CGSCopyDisplayUUID: Invalid display 0x003f003d
2/3/14 12:15:53.256 AM Dock[397]: uuid_callback_master: failed to retrieve UUID for display 0x003f003d (1001) (invariant failure)
2/3/14 12:15:53.272 AM WindowServer[141]: Session 256 retained (2 references)
2/3/14 12:15:53.281 AM WindowServer[141]: Session 257 released (1 references)
2/3/14 12:15:53.488 AM airportd[63]: _doAutoJoin: Already associated to “XXXXXXX”. Bailing on auto-join.
2/3/14 12:15:53.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:15:55.308 AM WindowServer[141]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/3/14 12:15:55.338 AM WindowServer[141]: Display 0x04273140: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
2/3/14 12:16:08.120 AM spindump[462]: Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2014-02-03-001607_Bielski-MacBook-Pr o.diag
2/3/14 12:16:09.114 AM spindump[484]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-02-03-001609_Bielski-MacBook-Pr o.diag
2/3/14 12:16:10.401 AM spindump[486]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-02-03-001610_Bielski-MacBook-Pr o.diag
2/3/14 12:16:32.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:17:52.335 AM warmd[19]: [__warmctl_evt_desktop_up_block_invoke:499] Desktop up bcstop timer fired!
2/3/14 12:20:52.788 AM SecurityAgent[491]: MacBuddy was run = 0
2/3/14 12:20:52.926 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:20:55.909 AM SecurityAgent[491]: User info context values set for XXXXXX
2/3/14 12:20:56.362 AM SecurityAgent[491]: Login Window login proceeding
2/3/14 12:20:56.735 AM WindowServer[141]: Session 257 is switching to console
2/3/14 12:20:56.765 AM WindowServer[141]: Session 257 retained (2 references)
2/3/14 12:20:56.766 AM WindowServer[141]: Session 256 released (1 references)
2/3/14 12:20:57.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:20:57.290 AM airportd[63]: _doAutoJoin: Already associated to “XXXXXXX”. Bailing on auto-join.
2/3/14 12:20:57.974 AM parentalcontrolsd[499]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/3/14 12:20:58.773 AM WindowServer[141]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/3/14 12:20:58.900 AM WindowServer[141]: Display 0x04273140: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
2/3/14 12:21:14.958 AM com.apple.preference.security.remoteservice[511]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:14.978 AM com.apple.preference.security.remoteservice[511]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:15.247 AM WindowServer[141]: disable_update_timeout: UI updates were forcibly disabled by application "System Preferences" for over 1.00 seconds. Server has re-enabled them.
2/3/14 12:21:16.084 AM Dock[397]: find_shared_window: Invalid depth WindowID 0xbb
2/3/14 12:21:16.520 AM com.apple.preference.security.remoteservice[511]: Bogus event received by listener connection:
<error: 0x7fff7eaebb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7eaebe60> { length = 18, contents = "Connection invalid" }
2/3/14 12:21:17.004 AM WindowServer[141]: common_reenable_update: UI updates were finally reenabled by application "System Preferences" after 2.76 seconds (server forcibly re-enabled them after 1.00 seconds)
2/3/14 12:21:25.403 AM System Preferences[502]: view service marshal for <NSRemoteView: 0x7ff1c9440660> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x60800066bd80 {NSDebugDescription=The connection was invalidated from this process.}
timestamp: 00:21:25.402 Monday 03 February 2014
process/thread/queue: System Preferences (502) / 0x10b346000 / com.apple.NSXPCConnection.user.endpoint
code: line 2940 of /SourceCache/ViewBridge/ViewBridge-46/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
domain: communications-failure
2/3/14 12:21:27.128 AM com.apple.preferences.users.remoteservice[515]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:27.147 AM com.apple.preferences.users.remoteservice[515]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:27.914 AM com.apple.preferences.users.remoteservice[515]: Bogus event received by listener connection:
<error: 0x7fff7eaebb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7eaebe60> { length = 18, contents = "Connection invalid" }
2/3/14 12:21:35.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:22:03.403 AM launchservicesd[53]: Application App:"System Preferences" asn:0x0-41041 pid:502 refs=7 @ 0x7fd3e3c62950 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x44044 pid=522 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100019/0x186b3 queue
2/3/14 12:22:03.403 AM WindowServer[141]: [cps/setfront] Failed setting the front application to System Preferences, psn 0x0-0x41041, securitySessionID=0x186b3, err=-13066
2/3/14 12:23:24.677 AM SecurityAgent[527]: MacBuddy was run = 0
2/3/14 12:23:24.793 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:23:28.985 AM SecurityAgent[527]: User info context values set for JASON
2/3/14 12:23:29.193 AM SecurityAgent[527]: Login Window login proceeding
2/3/14 12:23:29.446 AM WindowServer[141]: Session 256 is switching to console
2/3/14 12:23:29.471 AM WindowServer[141]: Session 256 retained (2 references)
2/3/14 12:23:29.471 AM WindowServer[141]: Session 257 released (1 references)
2/3/14 12:23:29.677 AM airportd[63]: _doAutoJoin: Already associated to “XXXXXXX”. Bailing on auto-join.
2/3/14 12:23:29.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:23:30.726 AM parentalcontrolsd[537]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/3/14 12:23:31.491 AM WindowServer[141]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/3/14 12:23:31.542 AM WindowServer[141]: Display 0x04273140: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
2/3/14 12:24:08.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****

My Macbook is very slow, do I need more RAM?

I have checked the Activity Monitor as advised on the forums here and it says 16.3MB free.
It's around 5 years old and I've just upgraded to 10.8.2
I have no idea what this means but I also saw that this number is important?
Page ins 5.92GB
Page outs 6.88 GB
My question is do I need more RAM and if so how do I go about doing it?
Thanks!

Yes, you need more memory. While 2GB is the minimum for OS X 10.8, many have found that 4GB is needed for general performance. For what you run, you can see this in your page in/outs. Page outs generally should be no more than 10% to 15% of page ins. More than that can really slow the system down as it writes pages of memory to the hard drive while making space for something else to use memory.
OWC and Crucial are two vendors that sell quality memory. Your user guide for your MacBook will tell you how to install the new memory.

My MacBook Pro is always running very slow and freezes up at least once a day, please help!!!!

Over the last 6 months my Macbook pro is running slow and freezes up a lot, I've done a check with EtreCheck, report below.
If anyone can offer some advice I would be very grateful, cheers....
Problem description:
Consistently slow running of all programs and freezes up for 2/3 mins
EtreCheck version: 2.0.11 (98)
Report generated 16 November 2014 00:35:40 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 9 days 23:20:46
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (318.43 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.sbd.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AirPlayXPCHelper.plist
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[running] com.epson.eventmanager.agent.plist Support
[loaded] com.epson.ews.launcher.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 180.44 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 999.53 GB
Total number of backups: 7
Oldest backup: 2013-12-06 12:44:36 +0000
Last backup: 2014-11-03 17:58:25 +0000
Size of backup disk: Adequate
Backup size 999.53 GB > (Disk used 180.44 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      1% EEventManager
      0% fontd
      0% configd
      0% AppleSpell
Top Processes by Memory: ℹ️
137 MB com.apple.WebKit.WebContent
116 MB Safari
47 MB sandboxd
47 MB WindowServer
43 MB Finder
Virtual Memory Information: ℹ️
913 MB Free RAM
1.43 GB Active RAM
635 MB Inactive RAM
933 MB Wired RAM
36.97 GB Page-ins
2.13 GB Page-outs

You may wish to read about maintenance and upkeep of the OS X, plus other
information, across several topics in this site with topics divided into Guides:
•Tech Guides - TheSafeMac:
http://www.thesafemac.com/tech-guides/
Sometimes, items may have been inadvertently downloaded by accident or due
to poor advisement, and of those some can be a cause of slowness in Mac OS X.
Also, the use of scanning antivirus software can be a cause of slow and disruptive
system issues; since antivirus for the most part is not effective due to the nature of
the Mac OS X and the inability of an AV application to have records of unknown, &
unsubstantiated or rumored issues in the wild, since few or none are known to exist.
The note in the etrecheck report of excessive Page Outs, implies directly that the
computer may need to have more RAM installed; a matching pair of higher capacity
correct spec RAM chips, could be purchased from a reputable source & installed.
As much as, perhaps 16GB in a RAM upgrade, depending on the MacBook build.
All of those red-lettered items in the report that did not load, appear to be system
parts; perhaps that may be something to investigate. Not sure why that is...
{Because today is part of a weekend, I'd suspect the time of day and weekday are
both behind the lack of an earlier reply to your post here. Also, if there have been
weather or other disruptions in the lives of those volunteers who offer help, then
maybe they've had to modify their plans around such events. Or power outages.
We had one here for more than an hour, and everything went out. Even phones.}
So hopefully some other knowledgable readers may contribute ideas on how to
resolve the issues; troubleshooting may be helpful, and to read through sections
of TheSafeMac to see if there is any malware, adware, or other odd activity that
may point to a cause; removal suggestions for those are in that site. Also, if you
had visited any torrent or sharing sites, or downloaded free yet contaminated items
from software download sites, they could also affect your computer. There are
a few areas in that web site worth reading through.
In any event...
Good luck & happy computing!

Recently started running slow and freezing up while loading web pages etc.

Problem description:
Computer running slow and freezes up for a few minutes from time to time, I have owned it since 2011 with no issues until now.
EtreCheck version: 2.1.2 (105)
Report generated December 15, 2014 at 9:58:50 AM MST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:10:42
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (24.01 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/launchd.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Remove]
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.mice.driver.PS3Controller (1.0.0d1) [Support]
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist [Support]
[running] com.robohippo.HippoConnectAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.update.plist Adware! [Remove]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ℹ️
Omnibar Adware! [Remove]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      17% mds
      6% WindowServer
      0% AppleSpell
      0% fontd
      0% mds_stores
Top Processes by Memory: ℹ️
120 MB Safari
77 MB mds_stores
69 MB com.apple.WebKit.WebContent
60 MB ocspd
60 MB WindowServer
Virtual Memory Information: ℹ️
1.24 GB Free RAM
1.15 GB Active RAM
853 MB Inactive RAM
1.05 GB Wired RAM
1.00 GB Page-ins
25 KB Page-outs
Diagnostics Information: ℹ️
Dec 15, 2014, 09:48:45 AM Self test - passed

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How large of a hard drive can I install on dual G5, and do I need more RAM?

I recently had a situation in which my dual-processor 2.0 G5 was completely refurbished by Apple repair-new logic board, both processors, video card, thermistor, all new. Finally it has been working well after a month of trips back and forth from the Apple store. I have two internal hard drives installed on my G5, both 300GB, one for OS applications, and one for audio. I am running out of space on my main hard drive, and so I recently purchased a Maxtor 1TB hard drive, now manufactured by Seagate, from Fry's. After having my G5 refurbished, I was having an issue with my Samsung 930B monitor going into sleep mode when I boot-up from a CD, but other than that G5 was working fine. I removed the main 300GB hard drive from slot #1 and put it into slot #2, from which I had removed my audio hard drive. I installed the Maxtor drive in slot #1 and reformatted it for Mac using my laptop with ATA/USB cables previously purchased for data transfer. This took about 14 hours as I used the "zeros" option. After that I hooked up the internal cables to both drives and tried to boot up from Leopard in order to install it on the Maxtor drive, but again my monitor went into to sleep mode. We went to the Apple store to try to see if there was an issue with the computer, but everything worked fine with their monitors and CD's, as well as my CD. So there is some kind of issue with my monitor, probably software as it works fine when booting up from the main hard drive, and also was fine when I did its self-test function. While at the Apple store, they installed Leopard from their hard drive which took about 30 minutes.
My problem is this: When I arrived home, I turned on my G5, which had been set to boot from my new Maxtor drive and complete the Leopard setup process, which we had decided to do at home as it would have taken another 20 minutes in the Apple store. The G5 turned on, chimed, I got the Apple screen with the wheel, but then after that my monitor goes into sleep mode. I can hear Leopard's setup intro playing through the speakers, but the screen is in sleep mode. So I reboot holding down the option key so I can boot up from my old (300GB) main hard drive, now in slot #2. This works and the monitor screen does not go to sleep. However, as I am browsing on the web to check for issues concerning this monitor, the G5 freezes, and I get a screen with black bars with writing in them and various technical language across the screen. This happened several times after rebooting. Finally I shut the computer down. I am going to try removing the new hard drive and putting both old ones back in and see if the G5 stops crashing. I think the monitor issue is a separate issue, and I am more concerned with the crashing, as previous to the new hard drive installation the G5 was working fine, monitor fine, other than the issue when booting up from a CD. Do I need more memory? Is the 1TB hard drive too large for my dual-processor 2.0 G5 and overloading it? Would I be better off with a 500GB drive? Would appreciate advice from persons with experience in this area. Thank you.

I have replaced my 5 year old G5 with a Mac Pro, as the G5 just had too many issues, even after replacing all major components (logic board, both processors, video card, etc.) Once I took out the 1 TB hard drive from my old G5, it stopped having the kernel panic issue. Nonetheless I had been through a lengthy repair process previous to this issue, so I didn't care to trust an older machine any longer, especially since being told by an Apple tech that the "new" parts were really just older parts stockpiled from a central location. Could be new, could be refurbished. Apple was kind enough to credit the money we had spent on the G5 repairs towards the purchase of my Mac Pro.

I can not install Itunes 10.5 on vista or windows 7 my iphone 4 is much slower and freezes when i go to the store they turn me away with my laptops and tell me to buy there computer thats the only answer. I know there has to be away around it?

I ca not install Itunes 10.5 on vista or windows 7 my iPhone 4 is much slower and freezes and also certain apps and also certain features will not work on the phone now that I cannot update it to ios5. When I go to the store they turn me away with my laptops and tell me to buy there computer that's the only answer. I know there has to be away around it? I am also up for a new upgrade on my second phone line and was going to get a 4s but now I am thinking it may be the wrong choice I am very unhappy with Apple right now...

WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.

MACBook Pro - Extremely Slow with Freezes

Hi,
I have this macbook pro model
Model Name:          MacBook Pro
Model Identifier:          MacBookPro9,2
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
And with 385 GB out of 499 GB of free memory.
I have practically nothing on it, no huge files & not more than the basic apps., nothing !
However, I have a very slow response. Word sometimes takes a minute to open when I only have just Chrome running in the background.
It gets worse when many apps are running together, but even then its only basic apps nothing major. Safari would normaly take not less than 20 seconds to open. I have just dropbox thaat run automatically after start up but nothign else. Still most of the time I am faced with the slow response. The spinning beack ball is always on to, which makes me force quit alot of time.
My battery is working quite well
Thanks for the feedback !

If you choose to use garbage such as "Intego VirusBarrier" you are going to need more memory, a lot more. I suggest you uninstall it according to its instructions, and evaluate your Mac's performance without burdening it with completely useless junk. As long as Intego remains active, your Mac will have few resources remaining to do anything else.
Using Intego's "Virus Barrier" and "Net Barrier" products on a brand new Mac containing nothing but one minimally configured user account resulted in performance degradation so severe that it became nearly unusable. No knowledgeable Mac user would consider using it even remotely tolerable.
Intego should only be uninstalled using the uninstaller included with it. Don't use anything else. A successful uninstallation will result in the following:
After that, restart your Mac. Other Intego components will remain but they will be inert and will not affect your Mac's operation.

Need more than 90 minutes of continual video

,Need more than 90 minutes of continual video? Hi all,
I'm using the Vado HD [first gen] as a "hidden cam" type of thing for a play that I am filming. I have 2 normal cameras set out in the audience, but I want to mount the Vado HD above the stage for a bird's eye view of a sword fight scene that I can cut to when editing footage. The problem is that the fight scene happens near the end of the play and there are no intermissions.
Since the filesystem used on the Vado HD is FAT and not NTFS or HFS+, I run into the 4GB limit and the camera simply puts itself to sleep about 45 minutes into recording even though there is more space on the dri've and the battery is fine.
Can I reformat the Vado HD with HFS+ or NTFS? [i use a Mac but can run windows via VMware Fusion if need be]. Is there any way to squeeze 90 minutes of video in one file on this camera? If I reformat the camera, will it mess it up? [i don't use any of the apps that were installed on the camera - i moved them from the vid camera to my laptop actually, so i don't care about losing anything valuable on the vid camera].
Thanks for any tips you might have!
/vjl/

Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
* reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
* if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down.

Need more 2D performance with RX9800 Pro

Hello,
I need more 2d performance with this card, better vector work optimization and so on. I'm work with Illustrator CS2, and it's too "slow" when i am dragging, etc.
Is any way to incerase 2d performance ? Some unofficial drivers, or some "hack" ?
Configuration:
MSI K8T NEO 2
CPU Athlong 64 3000+
RX9800 PRO
2x512 Apacer 400Mhz CL2.5
Seagate 120GB S-ATA
PSU 500W chill

There isn't any optimization for that card to speak of with what you are doing.
I would think a Matrox card would be better suited, but I am also speculating. It is far better at 2d performance regarding raster/vector operations.
There might be a way to optimise the driver code, but I have no idea how.
You might want to look into communities related to the work your are doing. I do remember Adobe has a forum and tech docs, perhaps you might find what you are looking for there http://www.adobe.com/support/main.html

Need more speed

Hello!
My setup:
- I'm using Aperture 2.1.4 on an iMac 3.06 GHz with 4GB 800 MHz DDR2 SDRAM, 1 TB harddrive and Mac OS X 10.5.8.
- Right now I have 8 Projects with 3.250 photos. The Aperture-Library - 3.62GB - is on the internal harddrive.
- The originals are all RAW-files (from my Canon EOS 450D) and are stored on an external FireWire 800 iomega 2 TB drive. The folder containing the 8 sub-folders (coresponding to the projects) is 67.4GB.
- I have about 820GB free on the internal harddrive and 1.82TB free on the external harddrive.
My problem: I need more speed while editing! Highlights recovering, levels adjusting, changing the saturation or contrast - only to name a few - are realy slow!
I've renounced to generate any previews, but I'm not very sure I see any diference in speed. I even close ALL my other apps while editing in Aperture!
What can I do to accelerate working with Aperture?
Do you think holding only the current photos in the Aperture-Library (managed while editing and referenced after this) will bring an increase in speed?
Thank you for any advice!
Regards,
Vlad

It's hard to visualize without some sample data and the table definitions, but there's a chance this will work. I'm assuming this isn't dynamic SQL, but multiple reports, each report with a version of this SQL?
USE MyDB
SELECT * FROM MyTable WHERE 1 = 1 AND Factor = '1' AND varVE = 'XYZ'
AND varS + varL + CONVERT(VARCHAR(100), aDate) IN
(SELECT varS + varL + CONVERT(VARCHAR(100), aDate, 121) AS SLA FROM MyTable WHERE varD = 'val1' AND varE = 'val2' AND varC > 'val3'
UNION ALL SELECT varS + varL + CONVERT(VARCHAR(100), aDate, 121) AS SLA FROM MyTable WHERE varD = 'val4' AND varE = 'val5' AND varC < 'val6'
UNION ALL SELECT varS + varL + CONVERT(VARCHAR(100), aDate, 121) AS SLA FROM MyTable WHERE varD = 'val7' AND varE = 'val8' AND varC = 'val9'
UNION ALL SELECT varS + varL + CONVERT(VARCHAR(100), aDate, 121) AS SLA FROM MyTable WHERE varD = 'val10' AND varE = 'val11' AND varC LIKE '%val12%')
This should be somewhat faster, unless it's the last "LIKE '%VAL12%'" that's really the root cause of all the performance problems.
Provide some sample data and a little additional info, perhaps we can help more?
EDIT: Also, although I use it myself during the authoring/development phase of a query from time to time (where I have to make lots of changes to the WHERE clause on the fly), the "Where 1 = 1" should go away for real life production use. (Even
though interestingly enough, the optimizer rarely seems to complain too much about it from a performance perspective, it's the SQL equivalent of forgetting to take the price tag off of a gift.. ;-)

Need more memory?

My computer is running very slow & I've been told I need more memory. How do I know what to buy and where to get it? Also, how do I install it, or do I have to get it done somewhere?

This HP support document should tell you everything you need to know about upgrading your memory on a desktop computer.
However, before you spend time and money adding memory, you might want to try the tips and tricks in this document: Improving System Performance without Adding Memory (Windows 7). It offers some very useful techniques for speeding up your system. (Here's the version for Vista, and for XP/ME/9x). You might find that you don't need to add memory, but even if you still do, the suggestions are great for maintaining a healthy, quick computer.
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

Why is my iPad so slow or freezing since the iOS 8.02 update?

Why is my iPad so slow or freezing since the iOS 8.02 update?

Do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the ipad to boot back up.
If that doesn't help - settings - general - reset - reset network settings - no data loss, however you will need to reenter known wifi passwords.

Does my MacBook White 7,1 need more RAM?

Hi, I'm Federico from Argentina.
It's my first post here. First of all, sorry for my english, hope it's not so bad.
I am photographer and digital retoucher, so, as you might imagine... I use a lot Photoshop (CC).
I'm thinking that I need to upgrade my Macbook to 8gb (now I have 4gb) because my OSX is running slow, and it's affecting my workflow (upgrading to MB Pro is not a chance... no budget for that...).
In the Activity Monitor when retouching in Photoshop memory pressure shows in yellow (Mavericks).
Beyond that, here's my EtreCheck report, I think you may find it useful for troubleshooting my problem.
Thank you so much!
EtreCheck version: 1.9.12 (48)
Report generated 5 de agosto de 2014 19:25:37 ART
Hardware Information:
MacBook (13-inch, Mid 2010) (Verified)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
DELL E207WFP 1680 x 1050 @ 60 Hz
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 1:30:0
Disk Information:
TOSHIBA MK2555GSXF disk0 : (250,06 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 249,2 GB (3,45 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Wacom Co.,Ltd. CTL-460
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Problem System Launch Daemons:
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.motorola-mobility.mmcfgd.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.motorola.MDMUpdater.plist Support
[running] com.motorola.motohelper.plist Support
[loaded] com.motorola.motohelperUpdater.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[running] com.wacom.pentablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items:
iTunesHelper
Notas
Android File Transfer Agent
EOS Utility
Internet Plug-ins:
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Safari Extensions:
Turn Off the Lights: Version: 3.0.0.12
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Java Support
PenTablet Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 232.09 GB Disk used: 228.87 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 465.79 GB
Total number of backups: 9
Oldest backup: 2014-04-04 23:29:39 +0000
Last backup: 2014-07-29 17:57:09 +0000
Size of backup disk: Too small
Backup size 465.79 GB < (Disk used 228.87 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      6% WindowServer
      1% Google Drive
      0% Creative Cloud
      0% AdobeCrashDaemon
      0% Activity Monitor
Top Processes by Memory:
1.40 GB Adobe Photoshop CC 2014
29 MB Adobe Bridge CC
29 MB WindowServer
12 MB Finder
12 MB Dock
Virtual Memory Information:
30 MB Free RAM
885 MB Active RAM
856 MB Inactive RAM
472 MB Wired RAM
898 MB Page-ins
519 MB Page-outs

Yes, you need more RAM, but more imprtantly:
Macintosh HD (disk0s2) / [Startup]: 249,2 GB (3,45 GB free) (Low!)
Your Mac is running on vapour! You are risking data loss and a fouled-up system. You urgently need to move files (not applications) to an external hard drive, to leave at least 30GB free.

MacBook Pro running slow and freezing--Installed OnyX

I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.

I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.

N900 needs more optimizing (slow/stutter/freeze)

Similar Messages

Maybe you are looking for