N900 Radio player fails to load

My device is running on the latest V 10.2010-12-9 firmware and I've the FM radio player installed, it worked fine until I done some pairing to the bluetooth, now the FM radio fails to load, I tried to uninstall and reinstall the player, also remove the pairing but still the same problem, any idea ??

it might be worth looking in the update section to see if there are any updates for it, i haven't had any problems with it but i've had updates installed for it which might have had a fix for your problem

Similar Messages

Radio Error - Failed to load

New to the spotif service. Enjoying my 3 month premium trial! However, I am unable to use the "Radio" function on my Mac. Upon clicking on the "Radio" link in the left side navigation, I receive Error: Failed to load Any ideas on how to resolve the situation?

Having the same problem, happens in the app in Windows 8.1 and Windows 10. Also happens in the Android app. And in the web player in Firefox and Chrome. Have had both the Failed to load error and just a neverending "loading circle". The Android app only have the loading circle. Have also tried to uninstall, and deleting %userprofile%\AppData\Local\Spotify as suggested in other threads. No luck. Edit: Now I have also tried "Sign out everywhere", still get the same error.

Flash Player fails to load on start-up

I recently upgraded to Flash Player 11.2.202.235 for my Win 7 64 bit system and have had nothing but problems since. I can install Flash Player and it works fine, until I shut down or restart my system. Once the system restarts, it is as if Flash Player is not loading. I am using IE 9 and AOL 9.6 as web browsers and am getting the same result in both. I down loaded google chrome with the flash player to see if that would make a difference, no luck. When I look for flash player, it is in my registered programs and I have a folder for it as well. I have done the following things: tried downloading with anti-virus on and off, firewall on and off, pop-up-blocker on and off, downloaded through IE9 and through AOL, unistalled and reinstalled, Active X Filtering On and Off. Nothing seems to work, if I restart the computer, Flash Player is not recognized by any program...even Abobe. I have tried the troubleshooting forums, no luck there either. Anyone have any ideas or encountered a similar problem?

Try a clean install as described in http://forums.adobe.com/thread/928315

All ALSA plugins fail to load. Flash still plays sound however.

Alsa is basically functioning as alsamixer will load and does affect my volume. However any program that requires alsa plugins besides flash-player fail to load.
What follows is the output from running alsaplayer.
$ alsaplayer
snd_pcm_open: No such file or directory (default)
Failed to initialize plugin!
Failed to register plugin: /usr/lib/alsaplayer/output/libalsa_out.so
Failed to load output plugin "alsa". Trying defaults.
snd_pcm_open: No such file or directory (default)
Failed to initialize plugin!
/usr/lib/alsaplayer/output/libalsa_out.so failed to load
jack: server not running?
/usr/lib/alsaplayer/output/libjack_out.so failed to load
error opening /dev/dsp
Failed to initialize plugin!
/usr/lib/alsaplayer/output/liboss_out.so failed to load
Failed to initialize plugin!
/usr/lib/alsaplayer/output/libesound_out.so failed to load
NOTE: THIS IS THE NULL PLUGIN. YOU WILL NOT HEAR SOUND!!
Here is the output of the respective commands, posted as suggested on the wiki.
$ lsmod|grep '^snd' | column -t
snd_hda_codec_hdmi 22784 1
snd_hda_codec_conexant 42084 1
snd_hda_intel 22186 1
snd_hda_codec 77703 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6342 1 snd_hda_codec
snd_pcm 73736 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 19488 1 snd_pcm
snd 57384 8 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Jun 27 22:56 by-path
crw-rw----+ 1 root audio 116, 7 Jun 27 22:56 controlC0
crw-rw----+ 1 root audio 116, 10 Jun 27 22:56 controlC1
crw-rw----+ 1 root audio 116, 6 Jun 27 22:56 hwC0D0
crw-rw----+ 1 root audio 116, 5 Jun 27 22:56 hwC0D1
crw-rw----+ 1 root audio 116, 9 Jun 27 22:56 hwC1D0
crw-rw----+ 1 root audio 116, 4 Jun 27 22:56 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jun 27 22:56 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jun 27 22:56 pcmC0D1p
crw-rw----+ 1 root audio 116, 8 Jun 27 22:56 pcmC1D3p
crw-rw---- 1 root audio 116, 1 Jun 27 22:56 seq
crw-rw----+ 1 root audio 116, 33 Jun 27 22:56 timer
Last edited by Untamed9999 (2011-06-28 03:10:20)

Thank you. Problem solved. disabling "FoxiFrame aerosnap" and resetting the toolbars and controls did the magic. Well, gotta clean up my interface now...

I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL

I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL

I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL

Failed to load to macro media flash player

hi am using windows 7 ultra 64 bit and am trying to use a program called bass guitar tips it runs of of flash player but every time i try it just get a failed to load to Macromedia player i checked with them for the issue but they just assured me that it wasnt thier program and i have a problem with flash ive check the forums and updated my flash to the latest version and deleted my cache file for flash / Macromedia if that helps but still not working any help would be appreciated thanks

Are you having problems with other Flash content (YouTube, etc?)
Can you try installing both of these installers then try again?
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

[Solved] Ncmpcpp Visualizer Failed To Load (Blank)

I've install ncmpcpp and mpd and I've followed each guide to enable visualization. Unfortunately I don't know what have cause it to failed to load.
Everytime I hit '9' to reveal it, it just showing blank terminal..for your information all of my songs just played fine.
I used config from one of our member via this thread. here is my .ncmpcpp/config:
##### connection settings #####
mpd_host = "localhost"
mpd_port = "6600"
mpd_music_dir = "/home/drfreddy/Music"
mpd_connection_timeout = "5"
mpd_crossfade_time = "1"
mpd_communication_mode = "notifications" (polling/notifications)
visualizer_fifo_path = "/tmp/mpd.fifo"
visualizer_output_name = "my_fifo"
visualizer_sync_interval = "1"
visualizer_type = "wave" (spectrum/wave)
system_encoding = "utf-8"
##### delays #####
playlist_disable_highlight_delay = "5"
message_delay_time = "4"
# Playlist
song_columns_list_format = "(7f)[cyan]{l} (25)[blue]{a} (40)[red]{t|f} (30)[magenta]{b}"
song_list_format = "{$3[%l]$9} {$5%a$9} - {$2%t$9} - {$6%f$9}"
now_playing_prefix = "$b$1» "
now_playing_suffix = "$/b"
playlist_display_mode = "columns" (classic/columns)
autocenter_mode = "yes"
centered_cursor = "yes"
cyclic_scrolling = "yes"
mouse_list_scroll_whole_page = "no"
# # Bars
song_status_format = "{%a - }{%t - }{%b}"
progressbar_look = "─╼ "
titles_visibility = "no"
header_visibility = "no"
statusbar_visibility = "yes"
# Browser
browser_playlist_prefix = "$2plist »$9 "
browser_display_mode = "classic" (classic/columns)
# Colors
discard_colors_if_item_is_selected = "yes"
header_window_color = "default"
volume_color = "cyan"
state_line_color = "white"
state_flags_color = "green"
main_window_color = "default"
color1 = "cyan"
color2 = "black"
main_window_highlight_color = "red"
progressbar_color = "cyan"
statusbar_color = "white"
active_column_color = "red"
visualizer_color = "cyan"
# Others
song_window_title_format = "MPD: {%a > }{%t}|{%f}"
search_engine_display_mode = "columns" (classic/columns)
follow_now_playing_lyrics = "yes"
display_screens_numbers_on_start = "no"
user_interface = "alternative" (classic/alternative)
And here is my .mpdconf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/drfreddy/Music/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#log_file "~/.mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#pid_file "~/.mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#state_file "~/.mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "drfreddy"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "Beats by Dr. Freddy"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_type "software" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Client TCP keep alive #######################################################
# For clients connected by TCP on supported platforms.
# Allows detection of dangling connections due to clients disappearing from
# the network without closing their connections.
# This is not usually necessary but can be useful in cases such as wifi connectected
# clients that go in and out of network range or turn off wifi without closing their
# connections. Combined with low max_connections this can soon cause clients to not
# be able to connect.
# Enable tcp keepalive on new client connections (default is "no")
#tcp_keep_alive "no"
# Time in seconds since the last communication on the connection and before
# the keepalive probing is started. (default is 7200 seconds)
#tcp_keep_alive_idle "7200"
# Interval in seconds between keepalive probes, once a probe started.
# (default is 75 seconds)
#tcp_keep_alive_interval "75"
# Number of failed probes before the connection is pronounced dead and
# the connection is closed. (default is 9 times)
#tcp_keep_alive_count "9"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
Can somebody tell me how to enable the visualization? Am I missing something?
Last edited by Archer1X (2013-02-07 10:48:34)

Nevermind..got it working after configured that I have to put this line in .ncmpcpp/config:
visualizer_look = "+|"
Anybody have a better look for the visualizer?
I also have tried several figures like "=="..hmm..kinda like it..
Last edited by Archer1X (2013-02-07 10:49:13)

Webpages and videos fail to load

I have Mac OS X 10.7.5, and I am using Safari 6.1.1.
Some webpages do load, but others fail to load. The blue loading often stops after reaching a certain point. Additionally, when I try to play video content within pages I am sometimes told that the plug-in cannot be found. However, Safari does not actually crash.
I have: emptied the Safari Caches, removed all website data, and switched all Safari extensions off. I have also installed plug-ins: Adobe Flash Player (latest version), Shockwave, Silverlight, Java, Flip4mac, and Adobe Acrobat. I also deleted all files from Macintosh HD/Library/Caches (which may have been unwise....).
The problem does not appear to be with Safari, as I have tried using Opera and Firefox, and they both experience the same issues (videos and webpages failing to load).
Assistance or advice would be appreciated.
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Export Release Build Flash Builder 4.5 fails to load over the web.

Exported Release Build Application fails to load over the web. You can reproduce using the following steps:
1. Create New Flex Project in Trial Flash Builder 4.5.
2. Use the default Flex 4.5 sdk.
3. Configure as a web application.
3. Place the following MXML code in the main application file:
<?xml version = "1.0" encoding = "utf-8"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark"
xmlns:mx = "library://ns.adobe.com/flex/mx"
minWidth = "955"
minHeight = "600">
<fx:Declarations>

</fx:Declarations>
<s:TextArea text = "Hello World!" width = "100%" height = "100%">
</s:TextArea>
</s:Application>
3. Save the main application file and Export Release Build to bin-release.
4. Place all files in bin-release on IIS web server in a web accessible location.
5. Go to the web accessible location in any browser with newest flash player and view the application's html page.
Actual Results:
Flash movie appears blank. Context menu shows Movie Not Loaded. Network traffic shows application main swf downloaded. Framework dependent swfs not downloaded.
Expected Results:
Movie loads. Hello World! appears in text box. Context menu does not show Movie Not Loaded. Framework dependent swfs downloaded.
Workaround (if any):
Deploy on an Apache web server.
The tests were run on IIS 7.x (7.0 for one, and 7.5)
Flex application was built using Flex 4.5.0 SDK pre-bundled release (built-in flex 4.5 with Flash Builder 4.5 trial) on Mac OS X 10.6.7 (10J869)
Flash Player 10.3.181.14
Example failing website:
http://staging.ibenergy.com/Test.html
Any idea as to why my exported release build fails? Any help would be appreciated.

Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
The URL you mentioned gives me a 403 forbidden error.
-Anirudh

After 10.4.4 Update Flash Failes To Load In All Browsers!

Has anybody experienced this problem?, Safari failed to load pluggin. even in IE, firefox and Opera no flash loads. Is there a fix for this? I have also downloaed the plugins and have re installed them varius times, and still no go. Its getting really anoying?

Hi, Brian.
One other thing I should point out: I also have
QuickTime 7.0.4 and the latest Flash player and have
not had a problem with either. Again, I'd be very
interested in knowing what led you to conclude QT
7.0.4 was causing the problem with Flash.
If it turns out that QT 7.0.4 was not the problem,
i.e. if the problem recurs after removing QT 7.0.4
using the reinstaller you cited, let me know as I
saved the other list of analysis and suggestions I'd
planned to post.
Thanks!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
dr Smoke,
You helped Brian with a similar problem to mine. I get to installing the last item of Flash Player 8, when the following appears:
Error creating file
1006:5,-5000Access denied error
You do not have enough access privileges for this installation
I have run Disk Utility, tried reinstalling QT7.0.1 for good measure, and watche dthe console log as I am installing. The following appears:
/Users/gilespea/Library/Application Support/78908: line 14: /Users/gilespea/PSResult: Permission denied
grep: /Users/gilespea/PSResult: No such file or directory
grep: /Users/gilespea/PSResult: No such file or directory
grep: /Users/gilespea/PSResult: No such file or directory
grep: /Users/gilespea/PSResult: No such file or directory
grep: /Users/gilespea/PSResult: No such file or directory
grep: /Users/gilespea/PSResult: No such file or directory
/Users/gilespea/Library/Application Support/80435: line 2: /Users/gilespea/SetFolderWritable.log: Permission denied
/Users/gilespea/Library/Application Support/80435: line 4: /Users/gilespea/SetFolderWritable.log: Permission denied
/Users/gilespea/Library/Application Support/80435: line 6: /Users/gilespea/SetFolderWritable.log: Permission denied
/Users/gilespea/Library/Application Support/80435: line 8: /Users/gilespea/SetFolderWritable.log: Permission denied
grep: /Users/gilespea/SetFolderWritable.log: No such file or directory
grep: /Users/gilespea/SetFolderWritable.log: No such file or directory
ANY Suggestions!
667MHz PowerPC G4 Mac OS X (10.4.4)

Desktop Mgr 6 - "Music services failed to load"

I've got a T-Mobile Curve 8520.
This afternoon I uninstalled Desktop Mgr 5.0.1 and Office 2007 (with Outlook). I then installed Office 2010 (with Outlook), and finally installed the new Desktop Manager 6.0.0.
Almost everything works, but when I try to go to the Music page in the new Desktop Manager I see this:
Music services failed to load
An unexpected error occurred.
I've confirmed that the media card is enabled to act as a Mass Storage Device. I've rebooted the laptop, and shut down and restarted the 8520. I've closed and opened and closed Outlook and Windows Media Player. Desktop Manager is configured to use WMP, not iTunes.
Does anybody have any ideas as to how to fix this?
Thanks,
Steve
Solved!
Go to Solution.

Thanks, I didn't even think of looking there. (Sure feel dumb now! )
An error I see in the log states "INNER EXCEPTION: System.ArgumentOutOfRangeException -- MESSAGE: Specified argument was out of the range of valid values". The parameter involved relates to a path. It occurred to me that the problem may be due to my music library being stored on a NAS and not the local hard drive, so I removed that library and only used a music library on my D: drive (same physical drive as C: ), but the problem remained.
If I set the Desktop Manager software to use iTunes the music pane loads without problem.
I've attached the log to this post. Thanks for your help.
Attachments:
Desktop.txt ‏188 KB

QT Player Fails at Launch on MAC

Due to problems caused by Adobe products I had to rebuild my system from scratch. I reformatted a hard disk in internal drive bay 2. (Quad 2.5 GHz G5, 8.5 gig RAM). I bought the new package with MacOSX, iLife and iWork and installed OSX from scratch on the disk. I also installed iLife and then iWork followed by a fresh install of Adobe CS3 Design Suite. I used the Migration Assistant and moved the remainder of the old hard drive applications.
1.) iTunes works fine (movies play great)
2.) FinalCut Pro Studio seems to work fine. (Movies play and I can edit.)
3.) CInema4D works fine and I can animate and create QT movie files.
4.) I can play movies in Safari - they work fine.
QuickTime player fails! Version 7.5.5 came with Leopard on the 10.5.6 disk
QT will NOT load, it dies at launch. It throws this error: The application unexpectedly Quit. Maybe related to 3DxQuickTime plug-in.
I used Software Update and updated to QT 7.6 from Apple ... it still failed at launch.
I have reloaded the OSX from the Leopard DVD 3x no go still refuses to work.
I have trashed the prefs file in users/library/prefs folder
I cannot find anything related to 3Dz and Quicktime on the system disk
HELP!
I have reloaded the OSX from the Leopard DVD 3x no go still refuses to work.
Everything related to QT keeps working just the player won't work.

Thank you everyone for the help.
I did try the drive check and it passed without error but did find two minor problems with permissions on JAVA - over all effect did not help the QT Player problem.
Yes I am migrating MANY files from my old account - I have only two accounts on the system ADmin and mine. They both failed the same way, but both have equal access to applications.
THanks but I just can't do another full install right now, I have been through the process 3 full times withe same results. I am getting faster at getting the odds and ends fixed up. Although the Migration Assistant does move many of the old files, many of them must be re-initialized with serial numbers and do not come up working automatically.
You are correct the 3DxQuciktime plug-in is where the problem appears to be. I did remove everything I could find related to "3Dx" from any and all folders I could find but that didn't help either.
BUT - it's now FIXED! I did a re-install of the 3Dconnextion software, and it also restored QT to functioning. Apparently the Migration assistant moves something not named with "3Dx" but that is somehow associated with the software. It loads last just as Q is about to "go live", and then caused QT to fail. It's back now and QT works fine, although I have no idea where or what it exactly is. I don't even have the mouse device installed just the software.
Anyway I ma back up and working, as soon as I get a new drive (on order) to re;ace my number one sot drive I am going to make an image of the boot system and keep it there for Quick Re-installs.
By the way the original problem was caused by Adobe. I have had their CS3 suite for some time and purchased a copy of Photoshop Elements 6 to help some other Mac Club members, as I did not have it or use it. I use the full version of Photoshop. I downloaded the Elements 6 fro the WEB site and did not get a CD or DCD with the product. When Illustrator failed (who knows why) I tried to reload it from the original Adobe DVD, it got half way through the load and then the CS3 disk told me to inset my Elements 6 disk - hard to do since I didn't have one and why the **** should it want it anyway as it is NOT related to the CS3 suite.
Anyway I could not restore the original software as it refused to bypass the request. I e-mail an called Adobe about the problem. According to them my "Free Support" was over and I could pay them an hourly fee to fix the problem that they caused. After three attempts at this I told them they could shove it and put their software where the sun-never-shines!
So I removed Elements (uninstall with their software) from my hard disk and tried to re-install - still no good, CS3 kept asking for the Elements 6 original disk. Finally I had to uninstall all of of the CS3 suite and install from scratch. I took the opportunity to clean up a bunch of fonts in the process and somehow broke the CS3 serial number verification process. It finally installed but then I could not enter the serial number, so I punted and started from scratch, new OSX etc etc.
Anyway thanks after a week of head aches I'm back up and operational.

Why won't the CHUM RADIO player work on my 9630 Tour? It says buffering but won't stream

Im in Vancouver and trying to stream a local station on an app called CHUM Radio player. The station TEAM 1040 loads, says buffering but then wont play...
I select Play...
says "CONNECTION IN PROGRESS"
then says "BUFFERING" forever.
no volume no sound noTHING.
Same with other available stations...
BlackBerry Tour 9630
Telus Mobility
v 5.0.0.419 (Platform 4.2.0.179)
I have unlimited data and stream with an app called Rabiobee with no problem. I have friends with BB Curves who have no issue with the app.
Thanks in advance
Dan.

Let me suggest first off, just a simple reboot, and try again.
With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Itunes download fails to load goes straight to Thanks Page Win xp sp3 64 AMD

iTunes fails to load when I make attempt. It goes straight to Thanks For Downloading iTunes page. The updater was failing to update, I followed the directions and uninstalled all iTunes related programs, including Apple Support Appl., Bonjour, etc. The computer is a 64 bit Windows Xp sp 3 plenty of Ram and Memory available. I followed thew support asuggestion and was able to load Real Player, I have used the MS registry checker , all checks well. I have tried with both IE, and Chrome browsers.

I'll answer my on question. No problems, when I was directed to the Apple's site to download iTunes 10.5 I clicked down load and in a couple mintues iTunes icon popped back up and all my music and apps where there.

Flash Player fails to update from Download Center

I have been trying, with no success, to install the latest version of Flash Player on my PC. When I am directed to the Download Center, it is a blank page, minus the header for Adobe Flash Player. This is extemely frustrating. My PC had operated just fine, allowing us to play all types of games on FaceBook, until sometime in February, when all of a sudden, error messages began appearing, games would no longer load and would sort of hang up showing perhaps a 31% loading message and just remain at that percentage. My fiance used to play WGT Golf game and Poker Stars, and now he cannot play those, as they, too, fail to load! I am frustrated beyond belief at this point in time. I do not understand how some games can still work on my PC, and others cannot. Please, someone help me figure out what is going on with the Flash Player on my PC! Thanks much, Lauretta Phillips

http://forums.adobe.com/thread/1195540

N900 Radio player fails to load

Similar Messages

Maybe you are looking for