N900 TV Out issue

Hello, My TV out connections were not working properly when I am connecting to an external monitor. Although, my headphones are working fine. I checked with other TV out cables but same results. My phone is updated to current memo version. Help me out from this issue. Regards

Some TV-out cables use non-standard wiring (especially ones for in vehicle DVD players or asian brands).
Try connecting the red and white connector too...
If your monitor doesn't even flicker there's probably a hardware problem or a very strange software problem. If you do get a very short flicker, it's probably a NTSC/PAL problem with your monitor not supporting one of them.
I've tried dozens of cables and never had any problems what so ever, although it's always a surprise which RCA connector is which.

Similar Messages

Timed out issue in jsp page!

Dears,
It is really amazing for me to see this issue in my application which I deployed in Oracle Application Server 10g r2.
I am using JDeveloper 10g to create jsp pages.
On one jsp page i am displaying 15 html tables for a report.
All tables have 1 query to get records from oracle 10g database.
Am opening one connection and than one by one running queries just before each table and rendering data through ResultSet
(which is scrollable).
If I test this page from JDeveloper, it is displaying fine.
But when I deploy this page in Oracle Application Server 10g,
and create a portlet and show this jsp page in portlet and open this page,
this page most of the time giving 'TIMED OUT', and a few times displaying report properly.
I tried PreparedStatement to run multiple queries for Oracle DB, but couldn't make it successfully.
BTW,
I checked my OAS log, it shows following error:
09/03/16 18:39:08 hrwfapp: [instance=(null), id=(null)] ERROR: Request has exceeded its warning timeout Time[elapsed=61046ms.
Warning timeout=20000ms.] Request[id=5003532663665,3 providerId=493501 portletId=117 portletName=AttritionReports
portletInstance=35555_ATTRITIONREPORTS_493501 user=PUBLIC] Thread[ name=AJPRequestHandler-ApplicationServerThread-6
priority=5 alive=true interrupted=false groupName=ApplicationServerThreadGroup]
Please help me in this regard, what should I do to avoid Timed out issue.
Best Regards

Hi,
if this occurs only in combination with portlets then I would try the Oracle Portal forum for help or use customer support to help you analyzing the issue
Frank

How to deal with OpenCL grey out issue.

First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.

Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

When starting the Add-on: Connection timed out issue

When starting the Add-on: Connection timed out issue
Hi,
We have a client in SAP 2005 PL 44.
I built the add-on for them using simple installer wizard ( I tried advanced set-up also).
When starting the add-on, I get the message 'Connection Timed Out'.
Add-on status is failed.
But the add-on is actually connected. i.e, The functionality associated with the add-on is working fine.
I had SAP 2007 before and un/reinstalled SAP 2005 in order to connect with this client.
I had built the same add-on in a similar way for the same client for lot many times in the past, but I never got this issue.
I tried the following:
1) Delete SM_OBS_DLL and un/reinstall DI API
2) un/reinstall B1DE
Always I'm getting this error.
Please let me know your inputs.
Thanks.
Geetha

Hi Geetha,
The timeout issue has been discussed quite a bit already on this forum. Please do a search or look at these threads:
Timed Out Error with ADDON
Addon Connection Timed out
Regards
Aravind

How to avoid Time out issues in Datapump?

Hi All,
Iam loading one of our schema from stage to test server using datapump expdp and impdp.Its size is around 332GB.
My Oracle server instance is on unix server rwlq52l1 and iam connecting to oracle from my client instance(rwxq04l1).
iam running the expdp and impdp command from Oracle client using the below commands.
expdp pa_venky/********@qdssih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table
impdp pa_venky/********@qdsrih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table table_exists_action=replace
Here export is completed and import is struck at below index building.After some time iam seeing below time out in log files
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX.
Error:-
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 13-JAN-2012 12:34:31
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=170.217.82.86)(PORT=65069))
The above ip address is my unix client system(rwxq04l1) ip.
How to see oracle client system port number?
Please suggest me how to avoid this time out issues.Seems this time out is between oracle server and client.
Thanks,
Venkat Vadlamudi.

Don't run from the client ... run from the server
or
if running from a client use the built-in DBMS_DATAPUMP package's API.
http://www.morganslibrary.org/reference/pkgs/dbms_datapump.html

SOAP ADAPTER TIME OUT ISSUE

We are getting the data from sql server into PI through Soap adapter.
Till day before yesterday everything is running fine .But now it has started giving us the below error.
there were no changes done in the interface.
I am not able to see any error in the runtime workbench ,communication channel monitoring, message monitoring.
This below error is giving in sql server.
Can any PI expert explain or provide me a solution to solve this issue.
Msg 6522, Level 16, State 1, Procedure sp_PI_WS_Backflush_Production_V2, Line 0
A .NET Framework error occurred during execution of user-defined routine or aggregate "sp_PI_WS_Backflush_Production_V2":
System.Net.WebException: The operation has timed out
System.Net.WebException:
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at PI_WS_Backflush_Production_V2.Backflush_OB_Sync_SIService.Backflush_OB_Sync_SI(BackflushRequest_DT BackflushRequest_MT)
   at PI_WS_Backflush_Production_V2.StoredProcedures.Backflush_Production_V2(String PalletNumber, String StockKeepingUnit, String ProductionPlant, String BatchNumber, DateTime ProductionDate, String Quantity, String UnitOfMeasure, String Destination, String& uState, String SAPUser, String SAPPassword)

Time out issue could be due to the long running process in your SQL server. please check the SQL server for its performance and also check the number of http worker threads on the SQL server side where the SOAP adapter makes the call and get the request back.

Time out issues

I have a program which will retrieve the accounting information, the result as like as T-code F.19, but when i execute the program it will caused time out issue, I have not idea how to solve it. Could you help. Here is the source code which cause time out. Thank!
   select * from bsis
      into corresponding FIELDS OF table it_bsis
      where bukrs in so_bukrs and
            budat in so_budat and
            augdt = '00000000' and
            dmbtr ne 0.
    loop at it_bsis.
      select single * from bseg
         where bukrs = it_bsis-bukrs and
               belnr = it_bsis-belnr and
               gjahr = it_bsis-gjahr and
               buzei = it_bsis-buzei and
               ebeln in so_ebeln and
               matnr in so_matnr and
               hkont in so_hkont.
      if sy-subrc = 0.
          MOVE-CORRESPONDING BSEG TO BSIS_TAB.
          BSIS_TAB-WAERS = it_bsis-WAERS.
          BSIS_TAB-BUDAT = it_bsis-BUDAT.
          BSIS_TAB-BLART = it_bsis-BLART.
          IF it_BSIS-SHKZG = 'H'.
            BSIS_TAB-DMBTR = 0 - BSEG-DMBTR.
            BSIS_TAB-DMBE2 = 0 - BSEG-DMBE2.
            BSIS_TAB-DMBE3 = 0 - BSEG-DMBE3.
            BSIS_TAB-WRBTR = 0 - BSEG-WRBTR.
          ENDIF.
          APPEND BSIS_TAB.
      endif.
    endloop.

Avoid selecting BSEG within the it_bsis loop. BSIS will have huge data and when you do data selection for BSEG inside this loop things will only worsen.
My points:
BSIS:
1. Avoid 'INTO CORESSPONDING FIELDS OF" during the bsis table fetch. Instead define your target structure with the required fields and select only those fields from the BSIS table.
2. Make sure that only "Key fields" are used in your filter (where condition) for this BSIS table fetch.
3. I presume your company code in selection (so_bukrs) is a mandatory field. If not suggest for mandatory option.
BSEG:
To avoid selection of BSEG inside the bsis loop do the following.
1. Sort it_bsis by bukrs belnr gjahr buzei.
2. Move the contents of it_bsis into a temporary table of same structure, say it_bsis_tmp.
3. delete adjacent duplicates from it_bsis_tmp comparing bukrs belnr gjahr buzei.
4. Now use the below selection:
   select <fields required from bseg>
     from bseg
     into table it_bseg
     for all entries in it_bsis_tmp
where bukrs = it_bsis_tmp-bukrs and
belnr = it_bsis_tmp-belnr and
gjahr = it_bsis_tmp-gjahr and
buzei = it_bsis_tmp-buzei and
ebeln in so_ebeln and
matnr in so_matnr and
hkont in so_hkont.
if sy-subrc eq 0.
sort it_bseg by bukrs belnr gjahr buzei.
endif.
5. Modify your loop construct as below:
loop at it_bsis.
read table it_bseg into wa_bseg with key bukrs = it_bsis-bukrs
                                                              belnr = it_bsis-belnr
                                                              gjahr = it_bsis-gjahr
                                                              buzei = it_bsis-buzei
                                                              binary search transporting <required fields>.
if sy-subrc eq 0.
   move the required fields from wa_bseg to your BSIS_TAB.
BSIS_TAB-WAERS = it_bsis-WAERS.
BSIS_TAB-BUDAT = it_bsis-BUDAT.
BSIS_TAB-BLART = it_bsis-BLART.
IF it_BSIS-SHKZG = 'H'.
BSIS_TAB-DMBTR = wa_BSEG-DMBTR * -1.
BSIS_TAB-DMBE2 = wa_BSEG-DMBE2 * -1.
BSIS_TAB-DMBE3 = wa_BSEG-DMBE3 * -1.
BSIS_TAB-WRBTR = wa_BSEG-WRBTR * -1.
ENDIF.
APPEND BSIS_TAB.
endif.
endloop.

Time out issues in globe transaction

Hi experts,
I have one issue that is ,...A variant ran several times in the past for monthly requirements for CAT updates is now timing out no matter how short of length of time report is set to run.
Users are using the variants like CAT_HCN_SLP, CAT_IF, and CAT_HCN and populating the field "Date of Usage Decision" with a range from 15 days to as short as 1 day - and continuously having time out issues.
This report is necessary for CAT downloads for regulatory complaince and needs to be utilized by the end of the month if not sooner.
Thanks in Advance
Hari

Hi John,
I dont know what transaction are you talking about...
But if it is TIME_OUT.... you need to check for any OSS Notes available for this problem.
If not send a product error message to SAP.
There cannot be anyother solution,,,, if it is time_out.
go ahead.

Fallout 2 problems - NOT fade out issue

Hi
I recently wanted to run fallout 2 , so i installed it without any problems and run with wine.(0.9.19)
Everything is okay ,fade out issue doesent exist horray
but i have other problem - mouse pointer. In menus everything is okay ,but in game mouse pointer acts weird ,it is hery hard to move it.Impossible to play
It is weird because when i turn on menu in game pointer run normally ,it acts good even when it is at lower side on the screen in game(where weapons are shown ,etc)
I have tried various remedy but none works ,on wine db ,noone solved this problem.
Anyone run into this problem ,any solution ?
PS.in cedega game is unplayable beacause of fade in out problem even after renicing ,but pointer acts good so it is definately wine problem

I havent played fallout in a long time so i don't know if it has this option but check for hardware/software mouse pointer. Maeby that setting will solve the issue.

Please Help --Export to excel time out issue

500 Connection timed out
Hi Friends,
We have a query which runs about 3 minutes on web and brings bach 54000 rows , but when the user tries to export to excel It give timeout error as below.
Connection timed out (-5)
Error: -5
Version: 6020
Component: ICM
Module: icxxthr_mt.c
Line: 2467
Server: tepas0_abc_00
Detail: Connection to partner timed out
Please help me out.
Thanks a lot!

Hi,
Check the info here:
https://forums.sdn.sap.com/click.jspa?searchID=5203764&messageID=959490
There are also a lot of other threads on time out issue...
Hope this helps...

USB over current status detected pop out issue

Hi all
I faced an issue regarding usb over current status detected pop out issue. This popout keep pop out most of the time when i switch on my tv. Even i've try to plug off my cable and swith it on back.
Can anyone of you solve these problem for me....
Regards,
adzleazhar

Facing same problem as adzleazhar. Have used same laptop connected to 32in TV for several years. Problem only surfaced last month. Unable to resolve. Need help.

Windows Handheld application Time out issues.

How to Handle Windows Handheld Application idle time out issues.

For your reference I found something interesting stuff:
http://www.hjgode.de/wp/2011/07/04/wm-6-5-remote-desktop-client-disconnects-after-10-minutes/comment-page-1/
and a blog:http://blogs.msdn.com/b/raffael/archive/2009/09/11/remote-desktop-mobile-rdp-client-disconnects-after-10-minutes-of-inactivity.aspx
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

We're not Apple - these boards are user-to-user.
Your profile says 10.7.3 - try applying the 10.7.5 combo update.

N900 wifi critical issue

I'm having so much trouble using wifi. and I spent two weekends figuring out a workarround of my problem.
When Ever I go out of range or switch off my wifi router while my n900 conntected to it. After some time it gives the following error in dmesg.
[44597.423706] wl1251: ERROR timeout waiting for the hardware to complete
initialization
After this error if I do a top in terminal it shows wlancond is taking 100% of cpu. rmmod and sudo gainroot hang the terminal.
I raised my voice in maemo bugzilla and forum, no one seems to care about this issue.
I reflash my device with all the old and latest glabal and US n900 images and the issue is there. Can any one alteast let me know if it's a hardware fault so I can send this device back to nokia?
I tried with power setting disabled also nothing seems to be resolving my issue.
I tried different open and locked wifi router in office and back home cisco, netgear... you name it.
help me out plz.

Please check the last post in this bug:
https://bugs.maemo.org/show_bug.cgi?id=6416
restart solves this problem. but for the time being. If I move again or if I shutdown my wifi router, the problem appears again.
I did what I can to make sure I'm not missing any thing... from reflashing to different kernel module compilation. but nothing worked.
Another full day spent and with no clue and help what I need to do next.

Session time out issue in Firefox 3.0 .

I am using intranet application developed in .net framework 3.5. Users are authenticated via Windows Authentication in application.
Issues in following steps;
1) I am browsing application in one Firefox 3.0 browser. Simultaneously I am browsing some different site say google.co.uk in different instance of Firefox. Please note I am browsing google.co.uk in other Firefox browser not in different tab of same browser instance in which I am browsing my intranet application.
2) Session time out in intranet application .
3) I am starting new Firefox instance and try to open intranet site. I am again getting Session time out message.
4) I closed all of Firefox browsers (2 instances)
5) Start again a new browser and try to open intranet application.
6) It is successfully opend.
Now the pain is why I need to close all other Firefox browsers in case of session time out in one browser .Similar issue I was getting in IE 8 but they have feature like Open site with a new session .
It would be nice if you can help in getting rid of this issue
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; WOW64; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)

Hi Rohit,
If you want to increase Session time : increase time in web.xml in min
<session-config>
<session-timeout>30</session-timeout>
</session-config>
and after session time out if you want to re-login to webshop then
do following settings in XCM.
url : http://<host>:<port>/b2b/admin/xcm/init.do
goto -> General Application settings -> b2b -> b2bconfig.
For reloginurl.core: value : ../init.do
note: after session expire if your application is redirecting to https:<port>:<host>/....
Then
set SSLEnabled: as false
Restart your application
Hope this works.
Regards,
Devender
Edited by: devender on Jul 12, 2010 5:01 PM

N900 TV Out issue

Similar Messages

Maybe you are looking for