N91 COMPATIBILITY WITH VISTA

Hello, I am trying to setup pc suite with my nokia N91. I used the suite with the same phone with xp pro and upgraded to vista and was told that pc suite was not comatibile, this was a few months ago. I have just downloaded the pc suite today hoping that my phone would syncronise mmmh no luck. firstly i cannot get the updated drivers for the mobile. can some please advise if it is possible to connect the N91 with pc suite using vista
thanks

Hi jbraid
I don't know whether you have seen this thread which seemed to work for some!
/discussions/board/message?board.id=pcsuite&message.id=8984#M8984
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Photoshop 7 compatibility with Vista 64

    I just purchased a new Dell studio computer with Vista 64 OS and Photoshop Elements 7 preloaded.  I cannot get editor to work at all and organizer will not import photos from my camera.  I have followed techs' instructions from Adobe and Dell to no avail.  After many frustrating hours I went to the windows website and discovered Photoshop Elements7 is not compatible with Vista 64.  It would have been nice if the Dell salesman had told me this.  Anyway, I have paid for this software which I can't use and Dell will not give me a refund since the software is preloaded.  I am considering a trial download of Corel Paint Shop Pro Photo X2 to see if it will work with the Vista OS.

    Many people have reported that PSE 7 works well on Vista 64.   While Adobe has stated explicitly in writing that it does not support earlier versions of PSE on Vista 64, it has not put that in writing for PSE 7.  A couple of people have reported that Adobe support says that it is not supported, though Adobe customer support is often mistaken about many things.
    Did you actually contact Adobe technical support, and did they work with you?   I'm guessing that Adobe business development did the deal with Dell to distribute PSE 7 on Dell Vista 64 computers without consulting customer support, which doesn't want to support Vista 64, and now Adobe is just trying to ignore the mess they created.
    When you say "organizer will not import photos from my camera", do you mean that the Adobe Photo Downloader does not launch when you plug in the camera or card?  That is one thing that is known not to work on Vista 64, due ot a Windows limitation.   Have you tried importing the photos by doing File > Get Photos And Videos > From Files And Folders?   What happens when you do that?
    With respect to the Editor, you could look at these troubleshooting steps, the first of which are quite simple:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes
    They combine the knowledge from these forums with the Adobe tech notes and are more complete than what most Adobe support people have access to.  You might try working through all the steps, and even if you've tried something similar before, try the steps exactly as written here.

  • Secure Desktop compatibility with Vista

    Cisco states that CSD version 3.3.0.118 will work on Windows Vista if MS hotfix KB935855 is installed- I have yet to see this work. I've also seen a compatibility chart that states that you need Service Pack 1 on Vista- I have gotten that to work.
    My issue is I have a lot of users who are reluctant to install sp1 on their personal Vista machines. I don't even want to do this on mine because of the other ill effects it can cause. Does anyone know the exact hotfix that is needed for Vista to work with CSD without having to install sp1?

    To the best of my knowledge it can't be done without SP1.

  • I want to transmit a square pulse through USB port, is it possible?? if not then what is the best way to do that, preferable is with serial then parallel, and its compatibility with vista,XP,and @))7 windows

    hi froends
    i want to transmit a square pulse using lab-view, please help how to do that, the preference  will be USB,SERIAL, Parallel ports, it it must be compatible with all the os versions, like 2007 windows, vista,XP and other.
    please help..................

    sanghi wrote:
    OK I WANT TO DRIVE A RELAY.
    SUGGEST SOMETHING 
    Calm down!
    People can't read your mind.  If you want help, repsect those who contribute their time for free to try to help you.
    Put yourself in our shoes.  If I tell you I want to build a rocket, what information would you give me?  You would need to know if it's for a hobby, something bigger, carries a payload, carries living organism, how far does it go, where does it land (if at all), etc...  
    First of all, we still don't know what you want to do with this relay.  Using a computer to generate is series of pulses is not usually the best way.  What is the frequency of the pulses that you want to transmit?  And why do you want to use a relay?  What are you driving?  Can the relay that you are using fast enough to follow the pulse train that you'll be sending?
    Provide information, ask questions politely and people will help you.

  • Palm IIIx compatable with Vista?

    I have just obtained a PalmIIIx. Will it work with my Windows Vista operating system ?
    Post relates to: Palm IIIx

    Hi, and welcome to the Palm Community Forums.
    You will need the new Palm Desktop 6.2.2 (see Support & Downloads link above at the top of this page).  Then, you will need the new PalmHotSyncSetup application from http://www.pimlicosoftware.com/ .  Note, I have not tried it, but everything I've ever used from Pimloco Software has been first rate, so it should work.
    Let us know how you make out.
    p.s. I doubt it will work if your Vista system is 64-bit.  There are no 64-bit compatible USB drivers.
    Post relates to: None
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • X-FI XtremeMusic - Compatibility with Vista x64

    Hi. I currently have the Audigy 2 ZS installed in the following system:
    Intel Quad Core Q9300 (@ 2.5ghz)
    4GB DDR2
    ATI Radeon HD4650 GB
    Nvidia 730i chipset
    Yet installing the drivers provided on the website with the operating system of Windows Vista x64 gave me numerous problems (particuarly in games...no surround hearing or decent bass) so have decided to go for an 'assumed' more supported card - the XFI XtremeMusic.
    Now, my question(s) is, when I receive the XFI will the drivers on the CD be Vista x64 be supported and if not does it matter (I needed the CD before for my Audigy 2 ZS on XP before installing the drivers on the Creative website).
    Do I get all the GUI apps included
    Am I going to get that surround-sound-like hearing back (DirectSound or something is it's - the game I'm particuarly talking about is Americas' Army here if that helps). Bass too
    I need to ask these most probably obvious questions before I buy the product, just to save me the dissapointment.
    Thanks,
    Junkz.

    Your question :
    when I receive the XFI will the drivers on the CD be Vista x64 be supported
    Answer :
    No, most likely you will get an original Windows XP installation CD with Win XP drivers and the software suite for the X-Fi XtremeMusic Soundcard. The Windows XP installation CD for Win XP will not work in the any vista OS. Below is a weblink to get the X-Fi Installation CD for Windows Vista.
    This vista installation CD will have all the drivers and software needed to operate the X-Fi ExtremeMusic Soundcard. Yes. the GUI apps are included on the vista installation CD and some upgrades are required.
    Whats NOT included on the installation CD is the Dolby Digital Li've and DTS Connect Pack, If you want it you have to buy it separately, weblink below. Also, this vista installation CD does not have the up-to-date drivers and software.
    Once you install the Vista installation CD completely, You must either download the updated drivers and software separately from Creative Labs download webpage or use "Creative Software AutoUpdate" to update to the latest drivers and software of your choice.
    Sound Blaster X-Fi Installation CD for Windows Vista :
    http://us.creative.com/products/prod...5&product=6743
    Dolby Digital Li've and DTS Connect Pack :
    http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD

  • Software compatibility with VISTA

    I have tried following the directions online by installing the 4.2.1 desktop software. After I connect, I am still receiving an error box that is titled Intellisync and it says Internal Error. I have tried to uninstall and install multiple versions of the software and I can't get it to work. Is anyone else having this problem.

    Unfortunately, the Touchpad doesn't even appear in the device manager. It's just not recognised at all. There's not even an unknown device in there or any devices with errors.
    I've tried going to the Toshiba European driver page and have downloaded and installed both drivers. Still no joy. It remains persistantly invisible in the device manager. The Synaptics driver even says during install that it cannot work if the touchpad itself isn't recognised by the OS.
    The laptop has been re-booted and the BIOS re-checked for the touchpad being enabled so much it must be getting a persecution complex :-P

  • ITUNES HD RENTAL NOT COMPATABLE WITH VISTA?

    I downloaded an HD rental and when I hit play it said must have windows seven to play HD rental. It would have been nice if there was a warning before you download something that won't work on your computer. All the 10.1 itunes say,"works on PC and mac" Well that's not true. How do I get my money back or move the rental to my mac so I can view that thing?

    Itunes 9.1 is definitely NOT compatible with Windows XP at this time. The culprit appears to be the Bonjour services package. I recently attempted to install via 3 methods: through Apple Update, via direct download over wireless and via direct download over wired connection. The result was the same in all three instances: when attempting to start itunes 9.1, it would immediately crash with a message "Itunes has encountered a problem and needs to close...". Upon checking the application event viewer (control panel > performance & maintenance > administrative tools > event viewer) I was able to determine that the itunes crashes were due to Bonjour in all but one instance. Bottom line: steer clear of itunes 9.1 until Apple gets their comparability issues corrected.

  • LaserJet5P compatability with Vista

    I am in the process of purchasing a new computer (Dell) which has no parallel port for my printer.  I am hearing conflicting stories about whether or not this will work on the new computer using a USB adapter.  I am sure I will need a new driver that will make it work.  The printer is about 15 years old, but still works great, is fast and can crank out plenty of pages in black & whit much cheaper than my color printer.  Can anybody help me on this.

    No, those were not the issues.  I cleanup every day and defrag every week and did both before installation.  Kept giving me those errors I listed.
    Still could not resolve them tonight so I uninstalled it.
    Verdict for me was as expected, but maybe others will have better luck, or perhaps they will eventually work the bugs out.
    Thanks anyway though.
    KAW.

  • HELP printer compatability with computor.

    Help...Have hp psc 1310  hp officejet 4200 series......Got a new gateway which is Vista and my old one was XP......my printer will print, but can not scan and tried to program the cd in again and computor would not accept it.  Will I need to get a new printer that is compatable with Vista?   Any thing to update of just have to get new?
    thanks enhelder
    Message Edited by enhelder on 07-07-2009 10:51 AM

    Hello Highcountryhike,
              Thank you for posting your request.  You should have no issues updating to 10.10 Yosemite.  Below are a couple links that should help.
    If you run the Software Updates from the Apple Menu, to check for updates.  Some have had issues not seeing updates, so simply click on "Store" from the top menu, and then click on Reload Page".  Select to install HP Updates to ensure you have the latest drivers.
    In some instances, the printer can be updated in the printer queue to resolve other issues, so check to make sure that the printer is listed with the HP Printer Series driver and not just AirPrint.  System Prefernces/Printers & Scanners/ select your printer on the left and check on the right side under "Location:" that Kind: is the printer series.  You can also click the "-" symbol to remove and then re-add the printer queue again, choosing the HP Printer series name to install the drivers.
    Installing the Full Feature HP Printer Driver in OS X v10.10 Yosemite
    Mac OS 10.10 Yosemite and HP Printer Support
    Please post back with any further issues/questions.
    Thanks,
    Double-U-Dee
    Don't forget to give Kudos where Kudos is Due - OR - if a Response Resolved your Issue, Click the "Accept as Solution"
    I am an HP employee, but my posts and replies are my own and do not reflect the opinion of HP.

  • MSI P6N SLI LIVEUPDATE WITH VISTA

    Does anyone know whether the MSI Liveupdate is compat with Vista.
    Dave.

    LiveUpdate at times won't get you the latest of the latest driver update... so don't hope so much on it even it starts running on Vista.

  • Compatibility with Windows Vista

    Hi,
    On Windows Vista system, when try logging into a repository in MDM Console, get the following error
    Error: u201CServer is no longer respondingu201D
    Same time when we login into a repository in MDM Console on Windows XP, it works fine.
    Luckily Data Manager, Import Manager and Syndicator works fine on Vista.
    Is there some compatibility issues with MDM Console and Windows Vista?
    Please guide,
    Regards,
    Navendu Shirali

    Hi Navendu,
    Me and my team are working on Windows Vista and our MDM Version is 5.5 SP06. There is absolutely no problem of the compatibility of Vista and MDM Console. All 4 GUI s are working fine.
    You better check out some other setting of Console and that of your mounted Server. I dont think Windows Vista might be causing any issues.
    Thanks & Regards,
    Shreya Landge.

  • Photoshop Elements 4.0 compatability issues with Vista

    How to resolve compatability issues when loading Photoshop Elements 4.0 with Vista operating system. The Software came with Canon Canoscan 8600F scanner.

    Nope, I'm afraid that's not gonna work out. The best you can hope for is trying compatibility modes, but otehrwise I don't think there is any way to run this 7 or 8 year old software on Vista or Win7/ Win8 for that matter...
    Mylenium

  • Elements 4 Compatibility issue with Vista

    Everything was fine 'till my old faithful pc, and Windows XP, went belly up. Now the new pc, with Vista won't allow the complete Elements program to operate. I'm told, "This program has known compatibility issues". If the issues are known, can someone please tell me how to resolve the issue. I can't seem to find any answer. I'm operating on a Hewlett Packard - HPw1707, and have an HP Photosmart C6270 all-in-one printer. 465 GB capacity. I'd really like to be able to work with Elements 4 and hope for help. Thanks

    What exactly the problem is?
    Is this printer not accessible through PSE4 or what?
    + Ripple

  • Will airport express be compatable with windows vista

    will airport express be compatable with windows vista

    vista will not be compatable because I do not have the capability in vista to download AirPort Utility 5.6.1 for Windows, which is a requirement for the ethernet connection to the Airport Express.  Is that correct?
    No, sorry for the confusion.
    You would need 5.6.1 on the PC only if you intend to use that to initially setup and configure the Express.  I understand that you will be using the Mac to setup the Express, correct?
    5.6.1 is not needed if all the Vista machine will be doing is connecting using Ethernet or wireless to the network. You don't have to install anything on the Vista machine if all it will be doing is connecting to the Express.

Maybe you are looking for