N91 great phone with GREAT problems!!!!

hello to all N91 users !
first of all i`d like to say that N91 is probably the best music player ever (the quality of sound is amazeing---i have an iPOD and it`s a little kid in front of N91)
so here are my problems:
-- THE music player gets paused in the middle of the trak many times ...i tried to format and still same problem
-- applications like task manager ,IM+..etc don`t work (i`m talkin about 3rd generation applications ,not old s60 softwares)
-- if i set an mp3 as a ringtone,when is ringing, after few seconds it gets to the default nokia tone
i`ve allready updated my firmware at nokia service center and today reinstall it with online support
my firmware is :
v 2.00.052
25-07-06
rm 43
n91(05.01)
thxz in advance
darhan

Hi
The pausing music is likely due to file corruption in the song file. Even though the file may play on the PC in musicplayer if the MP3 has enough lost data the N91 will sometimes just pause. I suggest identifying the songs that pause, try removing them and see if the problem stops
Apps: Just because an application is advertised as "S60 3rd edition" you need to ensure it explicitly says for the N91. Alot companies state something that is not always valid for all S60 3rd editions (ie they test it on an N80 and say "its ok for all devices)
MP3 ringtone that drops back to default. That should not happen. I used to see it sometimes if the vibra was on at the exact same time the song was about to play (vibra gets priority i think).
Music101

Similar Messages

I'm trying to sync my lady's iphone and it keep cancelling sync... I've synced 4 other phones with no problem... here's acting like it's playing hard to get... Help

My lady's iphone won't sync... Every attempt ends in a mesage saying "cancelling sync." I've synced my phone with no problems.. I'm stomped as to why her phone is playing hard to get.. Please help!

Hi,
I do have iDVD, but, and I shouldn't have included the mention of eventually needing a DVD, my primary concern is to try and make an MPEG 4. I've tried using share to go to .m4v and the system tells me to shut iMovie down, and won't render it at all. That one time I did run the MPEG 4 as I said, the image looked terrible - not just mildly so, but in some parts almost unwatchable.
I'm running blind on editing at this point because of the size of the project - sound is garbled and it takes forever to do any sort of editing - all I get is the spinning wheel of death. I really just need to get an MPEG 4.

Why can I login to iTunes from my phone with no problem, but I can't login to iTunes from my desktop.

Why can I login to iTunes from my phone with no problem, but I can't login to iTunes from my desktop using the same login credentials. I can use a different appleID and login to itunes with no problem.

Thanks for your reply. I mean that only when all of my music in the cloud is shown on my phone can I delete the music stored on my phone. I should be able to delete music that is stored on my phone when I can view ONLY the music that is taking up the phone's memory.

I have a feeling this has been up here a lot. I updated ios 6 to my phone with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

I have a feeling this has been up here a lot. I updated ios 6 to my phone (4S) with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

if you have no back up in icloud or itunes the best you can do is sync with your computer and get back what you can from there

2 phones with same problem - Cannot email photo from photo app...

Hi. I am going crazy here. Got my first gen iphone and new 3G ipone - all running latest 2.0 firmware (the later 547 version)...
Both phones have different gmail accounts setup on them and work fine when in the mail app for both sending and receiving (both phones).
Here is the problem.. If I go into the photos app and try to email a picture (on both phones this exact same thing happens), it takes ages with the spinnning logo along the top line near the carrier info.
Eventually it comes up with the message "Photo Delivery Failed - A copy has been placed in your Outbox. Sending the message content to the server failed."
I have tried deleting the accounts and reinstalling them - resetting network settings etc. all the same..
Why is this happening and on both phones with differnt gmail accounts..
Is this a known bug in the v2.0 software?
I am not using mobile.me by the way...
I am stumped - anyone?

Hey, just saw your email after fighting the "Message could not be sent" alert which happened every time I tried to send a photo from my iPhone... I tried my gmail, MobileMe and a personal account, no luck, and the "hard restart" that other posts talked about (http://discussions.apple.com/thread.jspa?messageID=8019073&#8019073) did not help me either.
Then I realized that the problem was only on my WiFi network (just like you said!); flipped it over to 3G, and the Photo was emailed with no problems.
This must be some sort of bug in the operating system... grr! But I'm glad you posted your findings, it saved me!

9630 Tour picture quality eventually fades to poor. 5th phone with similar problem.

st November I got the 9630 Tour when it was released to UScellular. Over time the pictures became blurry, that Phone was damnaged+replaced. Over time its pictures too got blurry. Unfortunately on a beach trip, that phone took a swim, and a replacement came. Her 2 months later, its also now has blurry pix. I use my Camera for business so what do I do? Continue 2 have the phones replaced, everytime the photos lose quality? Rim needs to look into this, as this is the 4th blackberry of the same model# and carrier to have the exact some problem. Any suggestions?

Device info: Tour 9630. Software ver. 5.0.0.484.
Your carrier: USCELLULAR
Apps: Google Maps, Pandora, Fbook, Myspace, WeatherEye, Blockberry,
PayPal, bbm, bbMaps, AOL IM, MSN IM, GoogleTalk,
App Free space: 65.5 MB
File free before and after a battery remove/replace. (settings, options, status): 68859364 Bytes
Did a battery pull fix your issue? Nope.
Apps installed and their version if possible. (settings, options, applications): Various Apps for all 5 phones, and has happened to every 9630 tour I have owned, eventually.

"Refurbished" replacement phone with many problems.

Fixed.

Check your network settings, and set it to LTE/CDMA if it is set otherwise. I've found that phones tend to reset to Global and I have to move it back to LTE/CDMA to get better response/reception.
Is the bluetooth on? Try turning it off to establish a better wifi/LTE signal.

New phone with a problem!

I just recently purchased my first Black Berry, the curve 8530. Sometimes when I'm hanging up from a call it takes a while for my screen to return to normal. There are times when I can only see the top part of my screen (sometimes this can last for about a min). Because this is a new phone and still covered under warranty, should I return it to the store and get a new one?

To prevent freezing or lagging/slow response on any BlackBerry, the most important practice you can adopt is to be sure to CLOSE applications when you are finished using them.
If you just hit the red "end call" key to go back to the home screen the application actually stays open and running in the background. If you do this repeatedly you will have lots of apps open and consequently your memory will get used up. Lack of memory is the biggest reason your BlackBerry slows to a crawl or locks up. If you get into the habit of actually using the menu key to close the applications this will at least slow down this memory-clogging process. You still may have to do a battery pull or use the "Quickpull" app once in a while when things get slow.
Likewise, check your applications running in the background. There are commonly four or five applications that will always be running (Messages, Call Logs/Phone, BlackBerry Messenger, Homescreen, and the Browser; there are other third party applications such as BeeJive, and BlackBerry Alerts which will also run in the background which you cannot close if you want them to operate). Make certain that the browser is NOT on an active webpage (open the browser and choose Menu > Close). Close any other applications that do not need to be running (the camera or a game you were playing or Google Maps).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT1277 I can not configure my major mail account at Mac Mфail - other accounts such as Hotmail and Gmail are working great. Also, I am using that major account at iPhone and iPad with no problem

hello. I can not configure my major mail account at Mac Mфail - other accounts such as Hotmail and Gmail are working great. Also, I am using that major account at iPhone and iPad with no problem. I had contacted mail provider - we had followed step by step all the settings,, they are correct, and I was suggested to use another mail program. Why, for God's sake I should use different programs for different mail accounts? Anyone, had the same problem?

it says - IMAP - Trying to log into this IMAP account is failed - Verify that username and password are correct
same for SMTP
in details -
WROTE Mar 03 00:31:16.375 [kCFStreamSocketSecurityLevelNone] -- host:gator3018.hostgator.com -- port:143 -- socket:0x6080002da240 -- thread:0x600000a76a00
2.180 AUTHENTICATE PLAIN (*** 60 bytes hidden ***)
READ Mar 03 00:31:26.667 [kCFStreamSocketSecurityLevelNone] -- host:gator3018.hostgator.com -- port:143 -- socket:0x6080002da240 -- thread:0x600000a77400
2.180 NO [AUTHENTICATIONFAILED] Authentication failed.
WROTE Mar 03 00:31:26.669 [kCFStreamSocketSecurityLevelNone] -- host:gator3018.hostgator.com -- port:143 -- socket:0x6080002da240 -- thread:0x600000a77400
3.180 AUTHENTICATE PLAIN (*** 36 bytes hidden ***)

Great problems with K7N2G-ILSR onboard raid controller

I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
Now my raid controller seems to be dead again cause it doesnt say a word again.
Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

I group messaged from my ipad and this has screwed up the way my messages are reveived by my friends (it creates new threads in their phones with my email in place of my contact name) I've stopped messaging from my ipad but the problem remains. Any help?

I have an iPhone 4S and use the group texting feature ALL THE TIME. I recently updated my iPad to the latest software and made the colossal mistake of continuing my group messaging from my iPad while connected to wifi. Doing this has successfully screwed but every group text thread I am in, to the point where its very hard for those involved in the thread to keep up. When I initially messaged those I was already engaged in text threads with it created a new thread in their phones replacing my name in their phones with my email. At first this was not a big deal but ever since then the people I am messaging have become increasingly frustrated with how my messages come through. If I am messaged in a group text and respond to it, sometimes when I respond it will create an entirely different thread in my recipients phones. So at that point they have to switch threads in order to read what I wrote. The new thread that my phone creates will send the message under my email not my name (related to the contact they have me saved as in their phones). The worst part about it is that there seems to be no rhyme or reason to why or when my phone will send the message as normal or under my email like it did with my iPad. I haven’t messaged from my iPad since these problems immediately began a month ago but the issues still continue. I have tried everything to get this to stop, I’ve turned off my wifi, I’ve had my friends delete the threads that my messages create in their phones. I’ve had them delete my email in their contact lists and nothing has worked. Can you help me? Any info you could provide would be greatly appreciated.
Note: My phone message no different whatsoever. All the threads have remained the same. The issue is what it is doing to the people that I am messaging.
Best Regards
Rick Mulhern
Message was edited by: Rickapplehelp19

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

Ora-12547 and ora-12560 Great Problem

Hello. Sorry for my english.
I've a great problem.
My server hp with 4 processor and 8 gb memory and oracle 9.2.0.6 and linux Red Hat Advanced Server have one great problem. If the connected user are 70 or more , I can't connect from the client with sqlplus name/password@service_name, but I can connect from the server with sqlplus name/password. sqlplus give me ora-12547 and if I launch sqlplus and after write user and password it give me ora-12560
If the session are 69 or less I can connect from the client and I can connect from the server.
The main applicatio work becaus it call oracle directly from server, but when the users are more then 70 I can't use odbc or Enterprise Manager Console from the client.
Any ideas ? Thank you.
Luca

MY INIT.ORA
# $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
# Copyright (c) 1991, 1997, 1998 by Oracle Corporation
# NAME
# init.ora
# FUNCTION
# NOTES
# MODIFIED
# atsukerm 08/06/98 - fix for 8.1.
# hpiao 06/05/97 - fix for 803
# glavash 05/12/97 - add oracle_trace_enable comment
# hpiao 04/22/97 - remove ifile=, events=, etc.
# alingelb 09/19/94 - remove vms-specific stuff
# dpawson 07/07/93 - add more comments regarded archive start
# maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
# jloaiza 03/07/92 - change ALPHA to BETA
# danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
# ghallmar 02/03/92 - db_directory -> db_domain
# maporter 01/12/92 - merge changes from branch 1.8.308.1
# maporter 12/21/91 - bug 76493: Add control_files parameter
# wbridge 12/03/91 - use of %c in archive format is discouraged
# ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
# thayes 11/27/91 - Change default for cache_clone
# jloaiza 08/13/91 - merge changes from branch 1.7.100.1
# jloaiza 07/31/91 - add debug stuff
# rlim 04/29/91 - removal of char_is_varchar2
# Bridge 03/12/91 - log_allocation no longer exists
# Wijaya 02/05/91 - remove obsolete parameters
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
# You may also consider using Database Configuration Assistant tool (DBCA)
# to create INIT file and to size your initial set of tablespaces based
# on the user input.
# replace DEFAULT with your database name
db_name=DEFAULT
db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGE
db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGE
db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGE
shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGE
log_checkpoint_interval = 10000
processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGE
parallel_max_servers = 5 # SMALL
# parallel_max_servers = 4 x (number of CPUs) # MEDIUM
# parallel_max_servers = 4 x (number of CPUs) # LARGE
log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0

Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how

Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your help

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

N91 great phone with GREAT problems!!!!

Similar Messages

Maybe you are looking for