N91 keypad unlock switch not working

plzzz help i have just bought nokia n91 now i find that its keypad unlock switch is not working what to do plzz help....

If you have just bought it then return it because you have been sold a broken phone.
If that is not an option then you will need to take it to a nokia care point and ask them to repair it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Similar Messages

HT4623 atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never

atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.

Hello sivas_live
Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G

I never set a passcode for my iPad but it is locked and I can't get it unlocked. The "slide to unlock" does not work. How do I get it unlocked?

I never set up a passcode for my iPad 2 but it is locked and I can't unlock it. The "slide to unlock" does not work. Any suggestions on how to unlock it?

You have to slide to unlock to bring up the keyboard if a passcode is set. If you can't slide then try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

I have problem with my iphone 5 lock switch..as lock switch not working properly..and my iphone is not in warrenty.. so plz tell me what i do...

i have problem with my iphone 5 lock switch..as lock switch not working properly..and my iphone is not in warrenty.. so plz tell me what i do...

The iPhone 5 is less than a year old, so all of them should still be in warranty unless they have been jailbroken or physically damaged. If you have a hardware problem as you describe the only option is to get the phone replaced by Apple or repaired by a non-authorized shop. The Apple replacement will be free at any Apple store in the country where the phone was purchased. If Apple determines that the phone was physically damaged or jailbroken it will cost $229.

HT1430 My iphone5 on/off switch not working, even we not able to reset the phone

Hi,
My iphone5 on/off switch not working, even we not able to reset the phone

OK, so are you asking what do to, or are you just sharing your situation?
If you're asking what to do, then you should bring your phone to Apple while it's still under warranty.

HT201412 Slide to unlock does not work no matter what we try. Phone receives calls and messages but we cannot answer either because the phone will not respond

iPhone 4s: Slide to unlock doea not work. Phone receives calls and messages but we cannot answer. We have tried numberous times to turn on/off to no avail.

It sounds like your phone is broken.

My iphone 5 "slide to unlock" does not work

My iphone 5 "slide to unlock" doe not work and has a camera icon beside it. I also tried to shut it off but the "slide to power off" also does not work. Please suggest solutions to correct it.Thanks

Reset the device by pressing and holding the home and power buttons for 15-20 seconds until te white Apple logo appears

HT1766 MY KEYPAD (NUMBERPAD)IS NOT WORKING

MY KEYPAD (NUMBERPAD)IS NOT WORKING HOW CAN I KNOW ABOUT WHICH OPERATING SYSTEM IS WORKING ON MY PHONE

Why not?
What error(s) are occurring?

Application switcher not working as expected

I am using the French localisation of Leopard. Using Application switcher (ie Cmd-Tab) I was able on Tiger to quit a running app by pressing A (an oddity due to the AZERTY / QWERTY differences). This does not work any more and I cannot quit an application from Application switcher. Any advice?

Cool. Learn a new trick every day... It works on my English keyboard (with the Q).
Maybe the "oddity" has been fixed and it is no longer A on the French keyboard, but Q, as it should be.

Keyboard layout switching not working

i use xfce4 and i created /etc/X11/xorg.conf
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us, ar"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
but it's not working.
xfce4 has a program called Keyboard in settings menu, i used it it gives the ability to add another language but it doesnt has a switching capability.

I don't use keyboard layout switch through xorg.conf because it stops to work sometimes(if i use setxkbmap for example).
So i am using setxkbmap in .xinitrc.
setxkbmap -model pc105 \
-layout "de,ru" \
-variant "basic,phonetic" \
-option -option "grp:sclk_toggle, grp_led:scroll, terminate:ctrl_alt_bksp, caps:none"
and "kbdd" for remembering layout for each window.
Change it to your needs or check the arch wiki about xorg.conf.d .

Has anybody experienced the iPhone off switch not working all the time.

I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue. The off button does not work all the time, sometimes I have to press it multiple times and other times it just works. The worst case is when it does not work at all, very frustrating. I didn't expect this type of issue for a phone that is not even a year and a half old.
I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue. The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
//*eggbox23

@diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option. I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures. Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
//*eggbox23

Three Way Switch not working

Hi, i just bought a 4th-gen shuffle, and I've been using it with satisfaction since Saturday. Then yesterday i finished to listen to some music and I wanted to turn it off, so I slid the switcher to the right. The problem is that it won't turn off, no matter where I drag the slider, I'm still able to play music with it...
I'll try to restore it as soon as possible, cause I can't even try to reset it via turning it off...
Any clues? Thanks in advice

HI,
My Buddy list from iChat were separated before and stayed separated on "Upgrading"
The group names also stayed the same
Uploaded with Skitch!
I have Magic Mouse and single finger swipes do not work in either direction. (I don't have Laptop and track pad to test further.)
Actually changing it from the Browser Single Finger "Scroll" to "Swipe" with two fingers solved this.
Uploaded with Skitch!
You do lose access via Swipes to Full windowed apps. (you have to click the DOCK)
I find that then I do have access up a d down the list of open Chats.
9:24 PM Monday; March 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mountain Lion, Automatic Graphics switching not working.

I have noticed when upgraded to Mountain Lion that my automatic graphics switching is not working as i would expect ..When i start Chrome my discrete graphics Intel 3000 turned off and all i get is AMD HD grapchics without using any graphic intense proccess please help here is my screen shots :
1: as you will see i have 1 tap open and nothing on the background except ACM
2: after 10 minutes writing on this post
PLEASE HELP.

I'm not sure that the dialog box indicates which graphics are currently being used?
Also, you have Google Chrome running. It's possible that Chrome invokes the discrete GPU... they acknowledged they had some code in Chrome that was activating the GPU and actually causing kernel panics on the new Retina MacBook Pros recently...

K430/K450: here`s the SOLUTION to Lenovo Power control switch not working anymore.

If your power control switch isn`t working anymore BUT you didn`t unistall it or erase some of his files, chances are that over time some software/update took control of some setting used by the Lenovo switch.
If this is the case, before reinstalling the software, try the following:
1 - Check your power plan option, if is on something else than Lenovo change your power plan option (scheme) to Lenovo Power Scheme.
2 - Access your pc advanced startup setting (win+x) check for the services LitModeCtrl and LenovoComService and set the two services to automatically start when the computer startsup. If it`s not working 99% is because some software (the most common is Samsung SSD Magician) has set the two to "Manual". Change to "Auto".
3 - Reboot and the Power control switch software will be working again.
I wonder why no one from Lenovo advice this, but i`ve had to find a solution myself after countless hit & miss attempts.

hi FlashOfLight,
Welcome to the Forums.
Have you tried performing a system restore to undo the changes? (by default, this feature is set to enabled)
regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Nano 4th gen hold switch not working

Hello. I just bought a used nano 4th gen on eBay. The hold switch is not working - the click wheel remains active and no lock icon appears in the upper right corner of the screen. It's on the latest firmware 1.04 and I've done a restore twice already.
The seller claims the hold switch did work before he sent it. Is there anything I can try to get it to work? It's out of warranty.
Thanks
David

iPod nano (5th generation) - User Guide
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. _If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for *two years* from the original purchase date of your iPod._

N91 keypad unlock switch not working

Similar Messages

Maybe you are looking for