N91 weird WLAN problem

Hi, Good day to you all!
I have a weird problem with my N91's WLAN, when it is in phone mode (general mode) I can't detect any access point or wifi hotspot on "connection manager>available WLAN" menu, even I'm just beside my wireless router, but when it is in offline mode, I can see all the available networks or hotspot but still I can't establish a connection between them, even on my own Wireless-N router at home.
does anyone here having the same proble like I do? is there a solution for this?
thanks guys, I hope somebody can help me.

Install the latest firmware for your N91 8gb if you haven't done so. If you got the latest firmware, make a backup & hard reset your phone. Its a series 60, it can be formatted, & firmware will be installed as in factory conditioned.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

N91 No WLAN network found

Good day sir / madam,
I'm having a problem with my N91's WLAN, here's my problem.
On "Connection manager>Available WLAN" menu will appear the SSID of my Wireless-N router and then will dissappaer after a few seconds, even I'm just beside the my wireless router, but if I make an adhoc connection, from a computer, the adhoc's connection name will stay there in the "Connection manager>Available WLAN" menu as long as it is active, then I have to restart my N91 to see the wireless router's SSID again on "Available WLAN" but surely it won't stay there, so I can't establish a connection between my wireless router to my N91
I hope you can help me with this problem,
Thank you.
[email protected]

Configured your wireless-N router to do only B2/G not N or auto specs. Its(N91) trying to negotiate for stable speed but can't. You don't have to be beside it, the strongest signal is halfway the max specs.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

Hi all,
I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
Apple Software Engineers - please help and release the next update to fix it
Best regards
O.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Habe seit IOS 6 wlan Probleme, die auch nach dem IOS 6.0.1 update nicht behoben sind.

Habe seit IOS6 wlan Probleme, die auch nach dem IOS6.0.1 update nicht behoben sind. Genau wie vorher, voller Empfang aber keine Verbindung. Gibt es noch neue Tipps wie man das beseitigen kann oder muss man auf ein weiters update warten?

Hallo,
bei mir kommt immer die Meldung "Verbindung zu ...(mein WLAN) fehlgeschlagen".
Nachdem alle Empfehlungen wie Neustart, WLAN aus und einschalten etc. nicht geholfen haben, habe
ich auf Empfehlung von telefonischem Apple Support mein iPhone 4S auf Werkseinstellungen zurückgesetzt und als neues iPhone konfiguriert. Leider ebenfalls ohne Erfolg! Meine sonstigen Geräte (iPhone 3GS, iPad2, ein weiteres iPhone 4S, die alle noch unter IOS5 laufen, funktionieren einwandfrei!)
Wer weiß, wie man wieder auf das gute alte IOS5 zurückkommt, zumindest bis Apple das Problem gelöst hat?

Logic remote wlan problems

Hey, guys,
I'm experiencing connectivity problems when trying to connect Logic Remote with an iMac running Logic Pro X. Both in the same network of course, all other apps requiring to connect the iPad with any Mac in the network work very well, internet is fine etc. Seems Logic remote connects for a second, than it disconnects again, saying WLAN is weak or unreliable (which isn't the case), sometimes no connection at all. All operating systems up to date.

I also had this WLAN Problems and solved it:
1.) Try to remove all controllers you added earlier (also Logic Remote) under setup..
2.) Restart Logic an Logic Remote -> This should re-add Logic Remote to your Controllers.

Weird audio problem during calls

I have a weird audio problem and was wondering if anyone else has had a similar problem or could help...
My wife and I both have iPhone 5's and sometimes (not all the time) when she calls me (or I call her), it connects, but no matter which audio input I choose (phone, bluetooth, speaker, headphones), I cannot hear her, but she can hear me... I hang up, call back (and when I call, there is no dialing sound, nor any other phone sounds) and it's the same thing. Sometimes restarting the phone works, other times I have to restart it 3-4 times before it'll work again. I try different things during these calls, like turning on/off bluetooth and/or wifi (pretty much anything I can think of that would make a difference), but nothing seems to help.
The (other) weird part is that after the last time of this happening, I tried calling my iPhone with my office phone and it worked fine, so then I immediately call my wife back with my iPhone and it was doing the same thing again. I called her back using my office phone and could talk to her fine...
This problem has been going on for a few months now and I have tried restoring the phone a couple times (and I am on the latest iOS) and sadly, that hasn't done anything to help... Does anyone have any ideas what is going on? I'd make an appointment for the problem, but since it doesn't do it all the time, I don't know what good it would do... But it is getting very frustrating!
Thanks for any help!
-Jason

Thanks for the response! It happened again yesterday... It seems to be happening more frequently in the past few weeks now.
I checked the link and have tried all of the things listed at one point or another over the past few months. I did just check my Carrier settings and it said it had updated (it's on 14.1), but I am not sure when that happened (could have been today, could have been after my last restore last week, not sure). I'll keep my fingers crossed that maybe that fixed it...
If it continues to act up, would you recommend that I bring the phone in to an Apple store or an AT&T store? I bought the phone through Apple, but my carrier is AT&T (and if you suspect that the problem may be with the cellular conection), maybe the AT&T store would be the better choice?
I really wish the problem would be more consistant or go away, cause trying to get the problem solved is driving me crazy!

ANOTHER NOKIA C3 WLAN PROBLEM

Ok, I'm not able to choose wlan or gprs internet but untill I was trying to open the Internet via WLAN tel says 'service not available''.'' activating default in all applications'' does not work, simply because it's getting back all my options from WEB and I''m connecting the Int via gprs again. What should I do? any ideas? maybe it's all about my router or so? THANKS IN ADVANCE!

Hi, this is Paulo Bral™,
I recently got an Nokia C3-00 mobile, and I faced so many problems with Wi-FI connection of this phone that I decided to share my experience with you guys.
I am going to write here the definitive guide to fix all WLAN problems you may encounter (and this is something that not even Nokia Support was able to do) - are you ready?
First of all, I am assuming you have the knowledge about Wi-Fi networking (SSIDs, Channels, Security, and all the terms related to setting up a decent Wi-Fi connection), second, you need to have full acess to your router, as we will configure everything from the ground, third and last you will need a tool called InSSIDer from Meta Geeks (Google it) to perform diagnostic tasks explained below.
Analyzing the networks around you
First off, you need to spend some time running the tool InSSIDer on your PC to collect data from Wi-Fi networks around you as they may be the cause of your connection problems. We will use these 2 visualizations: "Time Graph" and "2.4GHz Channel" to monitor the networks around - if you dont know what you are doing, better close this page and start running away.
Configuring the router
After collecting data from the networks around, now it's time to set up our router. I found out that I have other 15 networks around me, and I found out here that most of them were using Channel 6, the same I was using. Also some of them are using the Channel 9 and 11. In this case, I set my router to use the Channel 1, as nobody were using it and it is also far away from other Channels being used. After some time collecting data, you will be able to see which Channel has no user or less users, and you must choose it. The security of you WLAN is your choice, as it does not have any side effects. I suggest using WPA2 as it is the most secure of the 3 this mobile supports. BTW, don't ask me how to configure your router, ask Google for it!
Testing WLAN connectivity
Now it's time to test WLAN connectivity with your reconfigured router. Try opening some pages, try watching YouTube videos... If your mobile is working OK, with no connection errors or timeouts, your problem was only the interference caused by networks around. But, if you still experience problems like timeouts or errors opening pages and YouTube videos, you need to continue to the next step.
Using router QoS and Static IP
If you have an very fast internet (10MBPS+) you will need to slow things down, as this cell phone does not really support fastest internet speeds, now you have to know your cell MAC address, make it use an Static IP, and configure QoS to reduce the downstream speed on the cell phone IP to 3MBPS max speed - BTW, not all routers supports this, if yours don't support it, get another router, I recommend Cisco or LinkSyS.
Still having problems
The above steps solved my problem for a while, as the phone were working a little better with my Wi-Fi, yet I experienced some timeouts and errors opening pages. Now the next step will require a PC connected to your network and this will reduce to ZERO the timeouts and errors opening pages.
Keeping the Connection Alive - for bad routers
If you have a generic (not Cisco or LinkSyS) cheap bad router, you will need this step! I noticed that even when the cell phone were showing the Wireless icon, the LED indicating Wireless on my router was not always turned on, so I understood my router was like "ignoring" the cell phone connection and just stopped responding to its calls. To fix this bad router behaviour, you will need a PC connected to your network, and prepare yourself to laugh: All you need to do is "keep pinging" the cell phone IP as this will keep it connection alive. The simplest way is to create a .BAT file with these 3 lines inside:
:autoping
ping <cell phone IP>
goto autoping
Now save it on your desktop, use anyname.bat as you wish - now run it and connect your cell phone to the WLAN. You will notice the difference, as it will work so stable like if it were connected using LAN cable!!! You will never have connection problems again!
Well, that is it, following this guide your cell phone will never have WLAN problems again (well, at least on your WLAN).
Best regards,
Paulo Bral™
Am I butterfly dreaming I'm a man? Or a bowling ball dreaming I'm a plate of sashimi? Never assume what you see and feel is real!

Re: GT70 2PC - WLAN problem

Re: GT70 2PC (Dragon Edition) - WLAN problem
I am experiencing a problem with LAN rather than WLAN, it as not worked since I bought the Notebook in September. Microsoft support spent over 6 hours trying to assist. The driver is downloaded but not picki...

Good call. More problems kept popping up with even more usb ports. I RMA'd it with newegg and just got the new board and installed it. Working great so far.
So anyone who finds this post, if you are seeing these type of issues, definitely don't w...

Slooow internet and weird mouse problems?

I recently upgraded my iMac to Leopard (10.5.4) and started having weird mouse problems. At start up, mouse would be frozen in upper left corner. I'd restart, switch mice, restart, over and over. I use a Wacom tablet w cordless mouse plus Apples alum cordless keyboard. Eventually I tried switching USB ports for my Wacom tablet and the mouse was OK. I have learned that when this problem occurs, I need to shut down and unplug everything. That seems to solve it. Anyone know why? ALSO, ever since upgrading I have found the Internet to be appallingly slow. I have 2 GB memory and just upped my internet speed (supposedly) through Embarq.

hmm, what is a mouse usb or a keyboard usb?
arent all the usb ports same?
I really wish to show you how this happens it is really fun, but also annoying. especially when I am playing a game. it is interesting to watch the screen when suddenly all the world starts rotating when you are playing a first person shot'm up.

KT6V Weird boot problems

Hi..
I'm having this weird boot problem (and no it doesn't seem to be the standard one)
OK..
I have the following :
AMD Athlon 2000+
KT6V LSR mainboard
2x 256 Crucial PC2700 memory
IDE Hard Disk (120gb segate)
Creative 5700ultra Graphics card (AGP)
Cd Rom
Chieftec 400w PSU
WinXP Pro
If I set my CPU FSB to 100mhz (everything else on auto).. win Xp pro boots fine and all is pretty good except that my chip is now seen as a lowly 1.25ghz..
If I then set my CPU FSB to 133 or 166 then the machine boots (ie it beeps etc..).. starts to load windows xp (I get the logo and that's when the problem happens) and either black screens (ie.. nothing and the monitor turns off) or blue screens with the windows message saying that windows has detected a hardware fault and has halted the system..
I know my memory, chip, heatsink etc all work because just over an hour ago they all worked fine in my KT3 ultra.
What is going on as I've tried almost everything to try and solve this, with the only option to set the FSb to 100mhz which is incorrect for my CPU.
How do I fix this.
I've looked through the forum but this is not the same problem as simple reboots.. this is weird.
If I can't fix this then I guess it'll be send it back.. which is a shame because I like MSi motherboards.
Thanks
Slippery

Hi..
I've checked the CPU heatsink.. and nothings wrong !
(Can't check the voltage but I know the PSU is Ok as I did run it in a custom case with 4 Cd writters, 4 HDs, loads of lights etc.. before I moved to this new plain case tonight)
What's weird is that set at 100FSb it's fine but at 133 or 166 it just crashes after the loading XP logo is displayed. Up until that point it's all fine.
But why does it run Ok at 100mhz and not 133mhz ?
Please help.. before I end up fixing this with a hammer !
Thanks
Slippery

HELP!! n91 Wlan problem

HI..i have a n91 4gb model intially i had the company software version later i updated it to 1.10 and then to 2.20 and after this second update I DONT HAVE WLAN IN MY PHONE...what to do i dont understand the phone works fine otherwise but wht abt wlan i need it in my workplace plz reply and tell me what to do thank u..

Try connecting the N91 to your PC using the USB cable and USB mass storage/data transfer mode.
Does the phone's microdrive become visible on the PC and can you copy the files off it to your PC?

Very weird internet problem :I

Hi everyone, I am calling for all the experts because I have spent my last two days resolving this problem without any success.
I moved to a new location Saturday where I set up my Airport Extreme to provide a wifi network. The extreme is connected to the ISP's modem in Bridge mode. ISP modem address is 192.168.1.254. My Macbook gets usually the 192.168.1.4 IP address, DHCP is the 192.168.1.254. I have in this network my MacBook and the wife's Vista on a desktop PC. MacBook is up-to-date with 10.5.8. (Or, better to say, that was the starting system version)
What I experience is, that some of the websites are working in my MacBook (meaning they are loading in), while some not. That means white page, no content at all, loading goes forever. For example youtube does not come in. Adobe does not come in. Apple.com works. I couldn't find any pattern why a site can't load.
Safari and Firefox makes the same, so it is probably not a Safari bug.
The machine with Vista (on the same network) works with every webpage (using Firefox). I didn't had this problem on the old location.
I did the followings:
- I took my MacBook back to the old location, where the old network I used for years still works. Same problem. Never had this before. Then a got back to the new location.
- I connected the MacBook via cable to the Extreme (Aiport in MacBook disabled), same problem.
- I created a new user, nothing.
- I created a new network location, nothing.
- Reset Safari, nothing
- Tested browser capablities in various sites. I had some which were not loading at all, but the ones that worked gave back a good result, meaning every plug-in worked.
- Reset modem, reset Airport Extreme, nothing
- Changed wifi channel (from 6 to 4), nothing. I live in a village, no wifi pollution anyway.
- Deleted Safari and System cache, nothing
- Verified Disk permissions, some problems were found, repaired them, nothing.
- With the help of apple support I deleted some System configuration files which were automatically generated by new start, nothing
- I did a complete archive and install
- I tried out everything without an update (that means 10.5 and Safari 3.0.4), almost the same.I had some pages which were working after 2-3 min waiting, but with youtube for example I get some weird, almost only text content with small pictures and no video. After 2-3 min wait of course. And a message, that java is old. Hit the link, went to Adobe, slowly loading but I couldn't download the .dmg, Safari says network error, server could not be found.
- The I did an update (through Software Update, bandwith was O.K). System 10.5.8, newest Safari, the same problem that I had before archive and install. Youtube won't load at all.
- Then I did a complete new install with erase. Nothing, problem stays!
So, now I am sitting in front of a brand new installed MacBook with 10.5 (no updates yet after installation) and I really don't know what to do now. The problem seems to be not software related. The problem seems to be not network related (Vista works on the same network). Can this be a hardware problem? I really can't imagine it...

I did talked to the ISP and got the access codes to the ISP router. It's a WLAN broadband router, by operating mode I see the following option checked:
Wireless ISP: In this mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN. You must set the wireless to client mode first and connect to the ISP AP in Site-Survey page. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client or static IP.
So, would it mean, that if I connect my Extreme in bridge mode, than I do not have double NAT and that is the correct way of connection?
To clarify the situation, I have a microwave antenna and that is connected to the ISP router. Then a LAN port of the ISP router is connected to the WAN port of the Extreme. (I did try to connect it to a LAN port of the Extreme, everything was the same).

E61 WLAN problem

I still own an E61 and had a problem as it became "crazy" with all the lists being scrolled out (wherever I am ) continuously without beign able to stop it or to control anything!
So what I have done is reinstalled the frmware .
Since then I am not able to use my WLAN at all. No matter what I do I receive immediately "connection not available".
in the connection the existing Wifi spots are being seen but I am not able at all to even let the WLAN scan for existing Wifi or try to connect. The message is received immediately as I press the button!
Any help??
Solved!
Go to Solution.

I have a different problem, but I think it's just the phone as I read on different sites.
How can I turn wlan off ? Is it on all the time ? My settings for connection > wlan are Show availability - Yes, Scan for networks - Every 10 minutes. Does that mean every 10 minutes the wlan goes on then off ? It's weird, and power consuming I think.
Will a software update help ?
Thanks in advance

E60 WLAN problem

Hi,
I am trying to write a server socket program on E60 (S60 3rd) via Wireless connection. But the connection from client to server is not always success. Therefore, I tried to find out when the connection can be made. Many weird things happened.
First, I ping 192.168.1.210 (E60's IP).
Request timed out.
Reply from 192.168.1.210: bytes=32 time=48ms TTL=69
Reply from 192.168.1.210: bytes=32 time=17ms TTL=69
Reply from 192.168.1.210: bytes=32 time=13ms TTL=69
Reply from 192.168.1.210: bytes=32 time=16ms TTL=69
Request timed out.
Request timed out.
Request timed out.
The connection succeed when ping reply OK and fails when ping time out.
Ping reply OK only when the first few seconds after IAP is selected. After that, ping always time out.
I check the Wireless status from Conn. Mgr. and found that the status shows interlace of active and inactive. The status changes all the time instead of always active.
Then I use E60's SIP phone and X-Lite for test. A successful SIP call from X-Lite to E60 exists only when ping is OK.
Then I connect E60 and my notebook in ad-hoc mode. Everything goes fine. The connection always can be made and last till disconnction manually.
I think the problem may be the incompatibility of access point. Therefore, I tried D-Link DWL-900AP+, Cisco AIR-AP1120B, Corega CG-WLBARGP, Asus WL-700GE. None of them can let E60 connect to WLAN all the time. The connection exists only feww seconds.
Is it possible the bug of E60 WLAN? Wrong firmware? Or I got a damaged E60?

i have same unstable problem with my Nokia E70 wlan network. I use a WEP encrpytion 128 bit, and my connection work but is slow, always timed out, and disconnect every time. Wlan is set up correctly, because my desktop and laptot are linked using wlan, and they work ok. Is this a firmware bug? or my wlan network card in my phone is damaged?
I use a router Netgear dg834pn as access point for wlan.

N91 weird WLAN problem

Similar Messages

Maybe you are looking for