N91 WLAN Internet connection

This is what I have tried:
1.Home WLAN SETUP
a.Siemens ADSL wireless router (not used as ADSL but only as a router)
b.In one soccet I have plugged Local LAN which is connected to a local server from which 10 of us can use internet
c.My laptop uses wifi connection from router and can access internet without any problem
d.Security is defined as: wpa-psk, wpa2-psk key – laptop & router the same – works excellent
2.N91 setup:
a.I have tried most of advices found by googling – and it obviously doesn’t work
b.Local WLAN can be seen on N91, but after putting pre shared key it said that it is wrong key, since I’m only using numbers, not letters in both (router and laptop) and 100% sure that I have entered at least 100 times correct key in N91 I don’t know what a problem could be.
c.I have tried through setup access point and still doesn’t work
So any help would be very very much appreciated
Thx
Vex

I have a similar issue, the connection quality is terrible after wake up from standby. Tried to install the drivers direct from realtek but could not find the right ones.

Similar Messages

Problem with non WLAN internet connection

I've swapped my simm out from my N95 and installed the provider internet access settings via SMS. The N95 worked perfectly to access internet via 3G, but the N8 just can't make a connection. It looks like the settings are correct. However, whenever an application wants to use the internet (when I'm outside my WLAN) the first access point it checks is something it calls '02 MMS'. Sometimes it asks me to choose an access point and the same thing, it lists first this '02 MMS' and then the proper access points 'giffgaff WAP' being the correct point.
I can't find anywhere in the settings how to delete this 02 MMS setting. Not that I'm convinced, but it would be a start.
Does this make sense to anyone? Where do I start?
I'm very frustrated as it should be a simple matter. Swapping the simm back to the N95 works perfectly!

Ever figure this out?

Qosmio X770-13G - Slow WLan internet connection

Dear all,
I just bought a Qosmio X770-13G with Windows 7.
WIFI data transfer is very slow, even when using a high speed AP (tried it on more than one location) and after disabling the anti-virus program.
Using the Config Free program shows 6Mbps second download speed but even downloading a 4 Mb PDF file takes several minutes.
Updating the BIOS software and the WLAN driver did not help.
Does anybody have the same experience?
Thanks in advance,
John

Yes, it does. And a new development yesterday evening shed new light on this problem: In addition to using a couple of known AP's I tried connecting to new AP's. Result: a data transfer speed as expected. So it seems I dont have to look into faulty hardware but into connection problems with certain AP's. I guess my original problem (suspicion of faulty hardware) is no longer an issue. Thanks for the reply.
John

How do i connect my ipad to WLAN internet? it says its loading but never comes up with a tick

I have recently moved to Madrid in Spain from England where i bought my iPad. neither my iPad nor iPhone will connect to the WLAN internet in the house that I am living in. When i type in the password it saying it is loading however the tick never comes up and i cannot access the internet. This is a real problem as I need to use my iPad to apply for university. Any suggestions?

it still wont work but the same thing is happening when i try to connect on my iphone which makes me think it is something to do with apple products on the wifi

Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

I there a way to connect an Ipad to wlan internet?

I there a way to connect an Ipad to wlan internet?

Airport Express
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/1f4ad14e1067b2d0eb 1e39448ff51d0b.jpg
https://www.apple.com/airportexpress/

How to use n82's wlan, as internet connection for ...

Hi everyone!
I have a pc without wlan connection and a n82. I have a wireless access point in my room. I want to use the internet connection on my pc, with n82's wlan. How can I use my n82's wlan for sharing the internet connection thought usb cable? Is it possible at all?
Thanks for reply!
VBalu987

although the phone can be used as a modem it can't be used as WLAN switch or adapter, so it's not possible to do so, im afraid.
you need to get Wireless lan adapter for you laptop.
Fear not those who argue but those who dodge

Connect n91 to internet via pc's dsl or dialup int...

hello my friends,is there any way to connect nokia n91 via blutooth to pc's internet connection , i have try GNUBOX but it is wery hard and harmful for phone ,
thanksss
Nokia Is The Best In The World , I like It

I just did it.
MacBook Pro Mavericks, iPad2 iOS 7.1.
Just pair on the MacBook (which gives you a confirmation key) and enter said key when prompted on the iPad.
No sweat; works fine.

How to build up an internet connection via WLAN?

I am using WLAN at home with my E90. Since I changed the provider I got a DSL modem which does not connect to internet automatically. With WIN XP the internet connection is built up manually every time I start the computer (German expression is DFÜ - like in old times with your analogue modem). Now I am missing a possibility to do the same with my E90 - is there any chance enter the user name and password to get access to internet via WLAN? Thanks - even for negative answers...

Not that I'm aware of, I have had a good look around my E90 and the only connections you can define a user name and password for are packet data connections.

Losing internet connection randomly (wlan stays connected) - wicd

Since about a week now I'm running into endless problems with my wlan connection - before that, all worked well (I didn't changed any hardware)
I'm losing my internet connection in random intervals and I can't track down the reason for this problem. I've a dual-boot setup with win7 on it and there I have constant connection so this can't be any hardware problem.
I am using wicd to manage my wlan (wicd-kde, wicd-curses).
always used dhcp and never made any problems -even tried with static IP now which unfortunately didn't help.
One thing to mention - even if I'm connected, the connection seems very slow, compared to the laptop I'm on (in the same network).
now some console output:
lspci | grep -i net
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
(both on-board - lan is not used - just wlan)
sudo tail -1 /etc/rc.conf
DAEMONS=(!hwclock dbus syslog-ng !network !netfs crond wicd postfix sshd)
iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"Schnulli"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1E:69:9F:22:3F
Bit Rate=18 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=44/70 Signal level=-66 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:4238 Invalid misc:6580 Missed beacon:0
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:15:AF:0F:C8:48
inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:afff:fe0f:c848/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20308 errors:0 dropped:0 overruns:0 frame:0
TX packets:16695 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24970986 (23.8 Mb) TX bytes:2037458 (1.9 Mb)
/var/log/wicd/wicd.log:
2011/07/18 15:53:39 :: ---------------------------
2011/07/18 15:53:39 :: wicd initializing...
2011/07/18 15:53:39 :: ---------------------------
2011/07/18 15:53:39 :: wicd is version 1.7.0 552
2011/07/18 15:53:40 :: setting backend to external
2011/07/18 15:53:40 :: trying to load backend external
2011/07/18 15:53:40 :: successfully loaded backend external
2011/07/18 15:53:40 :: trying to load backend external
2011/07/18 15:53:40 :: successfully loaded backend external
2011/07/18 15:53:40 :: Automatically detected wireless interface wlan0
2011/07/18 15:53:40 :: setting wireless interface wlan0
2011/07/18 15:53:40 :: automatically detected wired interface eth0
2011/07/18 15:53:40 :: setting wired interface eth0
2011/07/18 15:53:40 :: setting wpa driver wext
2011/07/18 15:53:40 :: setting use global dns to False
2011/07/18 15:53:40 :: setting global dns
2011/07/18 15:53:40 :: global dns servers are None None None
2011/07/18 15:53:40 :: domain is None
2011/07/18 15:53:40 :: search domain is None
2011/07/18 15:53:40 :: setting automatically reconnect when connection drops True
2011/07/18 15:53:40 :: Setting dhcp client to 0
2011/07/18 15:53:40 :: Wireless configuration file found...
2011/07/18 15:53:40 :: Wired configuration file found...
2011/07/18 15:53:40 :: chmoding configuration files 0600...
2011/07/18 15:53:40 :: chowning configuration files root:root...
2011/07/18 15:53:40 :: Using wireless interface...wlan0
2011/07/18 15:53:40 :: Using wired interface...eth0
2011/07/18 15:53:44 :: hidden
2011/07/18 15:53:45 :: Autoconnecting...
2011/07/18 15:53:47 :: No wired connection present, attempting to autoconnect to wireless network
2011/07/18 15:53:49 :: hidden
2011/07/18 15:53:49 :: trying to automatically connect to...Schnulli
2011/07/18 15:53:49 :: Connecting to wireless network Schnulli
2011/07/18 15:53:51 :: Putting interface down
2011/07/18 15:53:51 :: Releasing DHCP leases...
2011/07/18 15:53:51 :: Setting false IP...
2011/07/18 15:53:53 :: Stopping wpa_supplicant
2011/07/18 15:53:53 :: Flushing the routing table...
2011/07/18 15:53:53 :: Putting interface up...
2011/07/18 15:53:55 :: Generating psk...
2011/07/18 15:53:55 :: Attempting to authenticate...
2011/07/18 15:53:58 :: Running DHCP with hostname blub
2011/07/18 15:53:58 :: dhcpcd[1333]: version 5.2.12 starting
2011/07/18 15:53:58 ::
2011/07/18 15:53:59 :: dhcpcd[1333]: wlan0: rebinding lease of 192.168.0.12
2011/07/18 15:53:59 ::
2011/07/18 15:54:00 :: dhcpcd[1333]: wlan0: acknowledged 192.168.0.12 from 192.168.0.1
2011/07/18 15:54:00 ::
2011/07/18 15:54:00 :: dhcpcd[1333]: wlan0: checking for 192.168.0.12
2011/07/18 15:54:00 ::
2011/07/18 15:54:05 :: dhcpcd[1333]: wlan0: leased 192.168.0.12 for 604800000 seconds
2011/07/18 15:54:05 ::
2011/07/18 15:54:06 :: dhcpcd[1333]: forked to background, child pid 1388
2011/07/18 15:54:06 ::
2011/07/18 15:54:06 ::
2011/07/18 15:54:06 :: DHCP connection successful
2011/07/18 15:54:06 :: not verifying
2011/07/18 15:54:06 :: Connecting thread exiting.
2011/07/18 15:54:09 :: Sending connection attempt result Success
really don't know what to do now - help is very much appreciated!
thanks in advance

Thanks for you answer!
Actually, I tried it with dhclient too and it didn't helped at all.
I switched to netcfg(2) now and it seems working - wicd is completely removed from my system - hopefully it will stay like this now.
the only problem for now is that my connection seems quite slow - any ideas where/how I can track down possible issues?
still I've no idea what was/is causing those problems since in win7 all works well..

N91 WLAN (WiFi) and Bluetooth Issues.

Hi Everyone,
I am having some issues with my new N91. I recently had the firmware upgraded, and the issues have not improved at all. I'm hoping someone out there has faced and solved some similar issues, or perhaps that you can point me in the right direction towards finding a solution of my own.
WiFi (WLAN). Okay, the N91 comes with WiFi built in. I have been able to find networks, and browse the internet on my phone, in Infrastructure mode. It is pretty simple. The problem has to do with encryption.
On my home network, I use WPA encryption with TKIP. The N91 configuration screens give me the option of using WPA with TKIP, but the phone won't connect. I tried changing to WEP on my home network, and configuring the N91 to use that encryption instead, but it also did not work.
Since I use other computers on my network with WiFi, turning off encryption is not an option. I did test the phone and the router with encryption off, it connects.
The issue is, the N91 will only connect to un-encrypted networks. This is fine for free hotspots, but I want to sync with my home PC via WLAN, send email and use the phone via VOIP. I also need to connect to encrypted networks on the road.
Has anyone managed to connect to an encrypted network with an N91? Do you know what specific hardware you were connecting to, and what protocols you used?
The second issue is Bluetooth. I drive a 2006 BMW M3 with bluetooth support. My old phone (Sony t630) connected to the car via bluetooth flawlessly. It shared the phonebook with my car, and automatically diverts calls to the car when I'm driving. I can answer the phone via a button on my steering wheel, which automatically cuts out the radio and allows me to take calls while driving.
The Nokia "pairs" with my car. However, regardless of what I do, it will not share the phone book, nor will it transfer audio to my car's sound system. According to the Nokia documentation, the pairing process requires that a code be entered for the bluetooth device on the phone, and for the phone on the bluetooth device. I cannot set a code in my car (the bluetooth device), since that is not an option. I can set the code on the phone for my car, and the phone then reports "Pairing Complete". Setting a code on the car was not required for my trusty old Sony. Though the N91 claims "Pairing Complete" there does not appear to be any mechanism for activating the car handsfree via the phone, and the car does not automatically take a call if the phone rings while paired. (On the Sony, one can "Send Call" to a blue tooth device, if the device doesn't automatically take the call, or if the pairing takes place after the call has been initiated.)
Does anyone know of a work around to get the phone to pair for audio (I can live without the phone book). Does anyone know of a third party application that will fix the blue tooth on the Nokia to make it work more effectively with my car?
Any information that can be provided on either of these topics will be greatly appreciated. Thanks!
Dan

Hi,
Thanks for the reply. Starting with the bluetooth aspect of your question. I can't say for sure which profiles the Bluetooth on BMW supports (still researching). I can say that my Sony t630 supports all of the protocols you listed, though I can't say for certain about the "AG" aspects. It lists:
File Transfer
OBEX
Object Push Protocol
Handsfree
Headset
And several others that I don't think are relevant to this particular issue. As I said, my phone lists "Handsfree" not "Handsfree AG". I'm still trying to research what if any distinction exists there.
The important point is that the bluetooth on the BMW isn't wholly defective. It does work with at least one phone. The bluetooth on my N91 hasn't worked with the car, but I have no other hardware to test with. I don't think it is defective either. I believe they both function, I just need to figure out what needs to be done for them to play together.
I think there are two questions that I'd like to find answers to. Has anyone ever modified a bluetooth profile on an N91 (or other Nokia)? Is it possible to add bluetooth profiles that don't already exist on the phone?
As for the point I made about my N91 not connecting to encrypted networks. I am correct to assert that it does not connect to unencrypted networks, though syntactically I shouldn't say "The N91" since it implies too much.
Semantics aside, my N91 can't connect to encrypted networks so far. My research on this site (and others) indicates other users have faced the same issue, and none of those threads came to a resolution that I could find. Searching this site, and others, I had found no documented cases of an N91 functioning on an encrypted network. Since posting (on another site) I have found one user who has had success, but that user hasn't yet responded to my question of how exactly he pulled it off.
In the absense of any evidence explaining how to connect an N91 to an encrypted network, and the prevalence of people expressing difficulty with it; I think it is correct to say "The N91 will only connect with un-encrypted networks."
I'd really like to be wrong on that statement, since I own the phone and I want to connect to an encrypted network. However, I haven't been corrected yet. So, if you can point me to a thread or discussion explaining what settings were used to make a successful connection on an encrypted WLAN of any type, that would be great.
To anyone reading this or helping out, I really appreciate your time and attention. Please let me know if I can provide any other information to help with this question, or on any other topics.
Dan

Satellite L650-19W - No Internet connectivity

I've read through several of the posts on here and it would seem there is a basic problem with Toshiba laptops and WiFi adapters. I have a Satellite L650-19W Part Number : PSK1EE-02C00REN
Last night I finally accepted the BIOS update to 2.10 and WiFi driver update. After rebooting, you guessed, it no internet connectivity. Adapter connects to the wireless network but no DHCP information is retained. I've been to 2 different hot spots now where it used to work and the same happens. So I rolled back the driver. No joy. I uninstalled the adapter. Nope. I ran a registry cleaner and reinstalled (several times, several old versions). Nope.
I booted into safe mode and well, well, the wifi works and connects. So it sounds like a driver problem with some files left hanging around but how I get it working from here I don't know.
Can anyone help?
TIA
Derek

Hello
Why you have updated the BIOS and WLAN driver? Did you have any problems in the past?
I would recommend loading the default settings in BIOS and test it again.
Its strange that it works in safe mode Have you checked the TCP/IP configuration if DHCP is set for WLAN card?

N8 apps make unwanted internet connection automati...

Dear users,
I have had my N8 for a week now. It's beautiful, but there is only one issue I cannot resolve.
With my other Nokia's (also Vodafone as provider) I was able to set any internet connection manually by selecting "Always ask" in the phone's connection settings to prevent the phone from making expensive internet Vodafone connections, especially when being abroad.
With my new N8, Vodafone has secured my internet connections (Vodafone Live), so I am not able to edit the connections anymore and make adjustments. I noticed that with many apps from the Ovi Store, my phone immediately selects Vodafone Live as an internet connection automatically, There is no way to change this or to prevent the app from making the connection to Vodafone Live. Even when my home Wifi network is in range.
Anyone with the same problem? Is it a Vodafone issue? Is Vodafone trying to push users to use their internet connection by protecting the connection settings for Vodafone Live?
Thank you so much...
Joost
Solved!
Go to Solution.

hi everyone,
first of all i want to say im polish so... sorry for my english ;p
im my language there is only one article about automatic connection forced by on n8-> http://translate.google.pl/translate?js=n&prev=_t&hl=pl&ie=UTF-8&layout=2&eotf=1&sl=pl&tl=en&u=http%...
i figured out its propably by nokia ovi store.
ive found that my n8 have the same problem as yours, i mean its connecting automatically to internet by network with priority #1 in INTERNET group. If its WiFi, nokia will connect by this WiFi if its Network Package Connection, nokia will connect by this one.
Shutting down (by widget) scanning for WiFi or disconnecting gives no improvment, still connecting about 3 sec after disconnecting.
Remove/Editing/Adding again connections
gives no effect
Restarting phone does not help. Widgets are offline.
setting -> connectivity -> admin.setting -> package data -> when needed/when exist
gives no effect
Menu -> Settings -> Connectivity -> Settings -> Data use in home country
Automatic/Always ask/WLAN only/Home network only
gives no effect
Menu -> Settings -> Connectivity -> Settings -> Switch to WLAN
Only know WLANs/Manual
gives no effect
Any ideas ??
FOUND IT !! Thank you ISMOK it was mail synchronising, after turning off every day it has stopped connecting.

Nokia C65 does not show me which Internet connecti...

I have a Nokia C65, and, to this day, I am not sure what operating system does it use, how do I check?
What worries more than this is that I have configured different connections including a WAP connection - provided by my telecommunications operator - Go plc, and, a number of WLAN connections configured so that when I am at the hospital, at home, at work - usually sitting on the loo , and, at a few places where WiFi is available - I can browse, check my email and keep on working.
The problem is that I receive bills from my mobile phone operator who would have deducted data roaming charges to my account, and, I am not sure how to control the connection that the mobile phone is using when browsing the Internet. Sometimes I am prompted, but lately I am not. However, the Internet connection setting reads 'Ask first'.
Does this issue happen to anyone else, or is it just me who is weird?
By the way any idea where do I download an application which takes screenshots from my mobile phone?
Is there a PC emulator for Nokia C65?
Jon C.

@jon80
It would help if you clarified if device C5-** or C6_** here as not enough information in your post to draw the correct conclusion.
Unless it is S40 device I would suggest Best ScreenSnap:http://www.smartphoneware.com/screen_snap-for-s60-5th-edition-product.php
Happy to have helped forum with a Support Ratio = 42.5

WRV200 + WebSTAR DPC2100 = Internet Connection lost?

I have a Linksys WRV200 with firmware 1.0.38 (http://www.cisco.com/en/US/products/ps9930/index.html)
The router is set to "Automatic Configuration - DHCP" to get ISP IP.
I also have a WebSTAR DPC2100 cable modem with an argentinian ISP called Fibertel (http://fibertel.com.ar/).
More information about my modem:
Tx: 41.7 dBmV
Freq Tx: 28600 MHz
Rx: -5.5 dBmV
Freq Rx: 567000 MHz
MER: 36.8 dB
Equipo: WebSTAR DPC2100 Series Cable Modem
Descripción: S-A WebSTAR DPC2100 Series DOCSIS Cable Modem Ethernet+USB <>
Versión OS: "v2.0.2r1244-050506-CVA2"
I have computers connected to my router:
2 computers with Intel WLAN and LAN cards
1 computers with Broadcom WLAN and LAN cards
So, my problems is this...
I'm trying to download a 1.5 GB file from MSDN Academic Alliance Software Center (http://www.e-academy.com/).
When I start the download, after more less an hour of download: the conection stops.
No more download.
No more Internet on any computer connected.
Also, the router shows no IP address from my ISP.
To get back my Internet connection, I have to unplug from the power the modem and the router. Plug them back... and everything back to normal.
But, I don't have this problem when I'm only browsing the Internet.
So, this only happends when I'm downloading... from one peer (as the example) or from multiple peers (P2P).
This happens no matter I'm using WLAN or LAN conection.
Also, this doesn't happend if I connect a LAN cable directly to the modem.
Any Ideas?
Thanks in advance for your help!

These products are being handled by the Cisco Small Business Support Community. (URL: https://supportforums.cisco.com/community/netpro/small-business)

N91 WLAN Internet connection

Similar Messages

Maybe you are looking for