N93 Screen Goes Blank & Comes Back On (Auto-restar...

Hi, I have the Nokia N93 black. It says it is made in Finland.
I have been using it for aboout a year and I got this phone by trading it with my earlier phone. I didn't get the phone as a new item but rather a 2nd-hand trade.
I have this problem of the screen going blank and comes back (auto-restart) sometimes. It is not very often but from what I observed, it happens usually during a long phone call, not every time, but sometimes.
I've looked around the in user reviews and forums and it seems that there is quite a lot of problems with the phone. Examples of these problems include auto-restart, auto shut-off, hangs and such. The fortunate part is that my phone doesn't hang.
I'm using the latest firmware, v20.0.058 and there isn't any updates ever since.
What do you think? Do you think this is a hardware problem? Do you think I should even be bothered about it? I'm worried because I didn't get it as a new item. Could the earlier user traded because he damaged it?

It can be either a hardware fault or a software fault.
To rule out a software fault you'll want to re-install the current firmware with Nokia Software Updater. If that solves the problem then it was a software fault. If not, then it's a hardware fault and you'll need to take the phone in to your nearest Nokia Care Point.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

TS3274 Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy

My phone screen goes blank and after a minute or so goes back to home screen. why?

hello. my phone screen goes blank and after a minute or so goes back to home screen. why? any help please?

Howdy mbaeguasu,
It sounds like your iPhone may be restarting unexpectedly while you’re using it. Take a look at the article linked below and, if you haven't already, try installing the latest version of iOS on your device.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
So long,
-Jason

Since downloading iso7 when I open iTunes Store the screen goes blank but the icons still come up at the bottom of the screen . Help

Since downloading iso7 when I open iTunes Store the screen goes blank but the icons still come up at the bottom of the screen . Help???????

Go into the Music app and access the iTunes Store through it. You should on have to do so one time.

How come everytime i add an image to my pages document the screen goes blank and then closes the app?

How come everytime i add an image to my pages document the screen goes blank and then closes the app?

Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy

6280 Time and date reset screen goes blank

Whenever I turn my 6280 off at night when I switch it on the next morning the time goes back to 00:00 and the date doesnt change automatically. Called up 3 and they werent much help at all just said to switch auto update of date and time on which I did and it didnt make any difference!!!! Has anyone else had any probs like this?
Also my phone occasionally cuts out either when I am on the internet or just when I am using it. The screen goes blank and then after a couple of seconds it comes back again. Apparently there is a firmware upgrade for the phone and the version I have at the moment is 3.36 does anyone have any idea where I can get this from??

Hello linslaf,
It may help to force close the Messages app, then restart the device.
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the next step would be to restore your iiPhone.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

Screen Goes Blank, Hard Drive Stuck, Cannot Re-Install, or recover

I have somewhat a bizzar problem that even with several years of IT experience I seam not to be able to figure it out. I thought I toss it our here at Toshiba community in hopes of people's collective experience shedding some lights on my problem.
I hava a 3 year old Toshiba Sattellite A305D with updated BIOS to version 2.10. It came with Windows Vista Home 32bit and I had upgraded it to Windows 7 64-bit last Christmas. It was working fine till last month that I started getting sporadic blank screens. Here is the symptome with details: screen goes blank, backlight it on, but there is no content on screen. At this time the Hard Disk Drive activity light is steady lit. Initially the problem happened intermitently and sometimes it fixed itself after few minutes and screen would come back on, but when it started to happen more often, I started to look for some troubleshooting. Some people suggested that blank screen could be due to bad lid close button being stuck or Windows power management's CPU power being set to 5%. I have tried cleaning the lid button and fixing power management but no luck. Then, I tried re-installing Windows from DVD, screen never went blank till after the first few steps of setup to the point that it says "Extracting Windows Files". At this time I started to think this is a hardware issue. I took out the RAM, I installed it on my MacBook Pro and used it for few days, and I had no problem. I even diagnosed them with Windows Memory Checker in the list of Recovery Options and no problem was detected. So, the next suspecious thing was the video card or display inverter. I tried connecting the laptop to an external monitor to test the screen's inverter, and same thing happened and external monitor went blank. I used Windows Recovery options and left it on that screen over night and nothing happened so I concluded the video card is fine. Next, I had turned off the Wifi and Lan, but nothing seamed to change, so I concluded those are OK as well. My last coclusion was that the hard drive is bad. I took the drive out and coonected it to my Desktop PC and ran disk utiility scan to check for bad sectors and none was detected. So, I thought the drive might be totally broken. I went to local electronics store and bought a brand new HITACHI SATA II drive and installed it. At first same thing happened so I gave up. Since I didn't have the recovery disks, I ordered recovery disks from Toshiba and tried that. Save thing happend and as soon as it started copying files, it blanked out. OK. So this time I ran a different recovery option and formatted the entire hard disk and zeroed out all sectors. That took approximately 3 days to finish for a 500GB brand new hard drive. Seams a long time.After that I could install Windows 7 64-bit from scratch up to the end. However, things got gorry again when I started installing Updates and driver packages. I had read about some problems with ATI drivers and Catalyst software with .NET updates, so I did not install any driver from update site and made sure all .NET updates are installed. I had to install the updates slowly chosing a few at a time. Otherwise same thing would happen. I got stuck to the point that I could not update anything. Windows files seamed to be corrupt and turning on/off Windows Features in controll panel was blank, so I had to re-install again. I did Re-install successfully using the upgrade option. This time I installed .NET updates first before any other updates. Then I started downloading all Toshiba drivers. Aazingly, the laptop worked for few ours without the symptom. I managed to install most of the drivers and updates including Value Added Package, HDD/DVD Rom Patch, Registry Patch, Sound, Modem, Atheros Wireless, and Catalyst. Up till now things were ok. Then I ran Toshiba Hardware update patch, and things got really messed up. Windows never booted again and symptoms showed right after boot tried to load WIndows. I tried recovery options but System restore kept getting errors too and I could not restore any more. Since Windows 7 Install and Windows Vistal recovery to Factory Default from recovery disk did not work, I thought maybe I should try Windows XP. So, I got a hold of my old Windows XP CD-ROM and I took a stab at it. Everything went fine till it started to copy windows files. This time symptom was different. I got one of those XP Blue Screen of deaths saying Hard Drive is bad and I must run chdsk /F. So, I concluded HDD is the problem. Ran CHDSK and no problem. I formated the drive again using DISKPART and the problem still exists. This is a brand new hard drive. What is the problem?

Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop. "A305D" is only partial.
That's quite the problem. How often was it doing this? At some steps in your diagnosing, it seemed to get better, but I wonder if it was actually (temporarily) fixed, or if it didn't occur by chance.
Unfortunately I don't have an answer for you. Normally I'd suggest you get it serviced, but then you'd also be throwing more money at a three year old notebook when clearly you're knowledgeable yourself.
Hopefully someone in the community will have some suggestions. I have noticed that some people shy away from posts with large paragraphs of text. (I'm not saying that's correct, but it happens.) I'd suggest putting some bullet points at the top summarizing. If you feel like doing that, you can edit your message.
Good luck!
- Peter

When I click on my Messages app I can see it for a brief moment and then the screen goes blank

When I click on my Messages app I can see it for a brief moment and then the screen goes blank. This happened to me last week and I Reset All Settings, which worked-but it has just happened again so that's not a long-term solution.

Hello linslaf,
It may help to force close the Messages app, then restart the device.
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the next step would be to restore your iiPhone.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

MacBook Pro, randomly Windows 7 doesn't start and screen goes blank

Hi, I installed Windows 7 (Ultimate 64-bit) using the BootCamp on my MacBook Pro (MBP) i7, mid 2010. Installation was successful without any issues. This is my first Mac and, for now, I primarily use Windows on my MBP. The problem: After selecting Windows OS, randomly, Windows doesn't start and the screen goes blank. When this happens, most of the time I have to press the power button twice and press the Option key again to restart in Windows. Sometimes I have to hold down power button for several seconds to turn off MBP, then power it back on to start over. Windows 7 seems to restart on second try every time.
I can tell when the screen will go blank and Windows will not start, when the blinking cursor does not appear on upper left corner of the screen. Also, I enabled Windows OS Boot Log and nothing displays when this happens.
I took in my MBP, twice, to local Apple store Genius Bar and I was told that it was a Windows problem and I must purchase AppleCare Protection Plan to get help resolving the blank screen. It was explained to me that AppleCare had Windows experts who can help with resolving the issue. Therefore I purchased the AppleCare Protection Plan and spoke to AppleCare directly and still no resolution.
Any help you can provide would be greatly appreciated. Thanks in advance.

There is a forum specifically for Boot Camp, this is a general MBP forum and most of us don't use Boot Camp or Windows. The link to that forum is:
http://discussions.apple.com/category.jspa?categoryID=237
Apple does support Boot Camp however if your problem is with Windows Apple does not support a Microsoft product. You would need to contact Microsoft for help.
Roger

Satellite A100: Screen goes blank after a while of no action and can't be reactivated

Hi all
I am after a bit of advise/help. I have a satellite A100 & after its been on for an extended period with no keyboard input (like burning dvds), the screen goes blank. It doesn't matter which keys I press I can't make it come back on. The only way out of it that I have found is to restart the machine.
Any help would be greatly appreciated
Thanks
Gary

Hi,
normally this means the machine is in standby mode (power LED is blinking orange). To reactivate you have to push the power button. Then it should bring back all opened windows as before going into standby.
You can deactivate standby function in the power management. (Start -> control panel -> power management)
Bye

Help me please i have ipad 3 its screen goes blank white again & again ... last night i try to restart my ipad but after that my ipad is not turning on when i put it on charge there beep coming again & again..

Help me please i have ipad 3 its screen goes blank white again & again ... last night i try to restart my ipad but after that my ipad is not turning on, when i put it on charge there beep coming again & again..

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

IPhone Screen Goes Blank

While making a phone call, when I take the phone away from my ear, the screen goes blank and I cannot end call or see call waiting - finally the screen comes back to slide to unlock, and the phone call is ended.
Anyone else having this issue? Any fixes?

WOW! So that's what the issue is!
Petshows, since getting my 3G last Friday I've been plagued by the same problem. It's been so chronic I suspected a fault in the iPhone itself. My first gen unit never exhibited this behavior so I was on my way to the Apple Store tomorrow to report it to the techs at the Genius Bar. But...
...I'm now convinced that Nathan C. has identified the source of the problem. I use a DLO brand "Jam Jacket" I bought for my original iPhone. It has little cut outs at the top for the position of the proximity sensor and the earpiece. I now suspect that either the 3G proximity sensor is less sensitive or its position is slightly different from the first model and it isn't aligning properly any more.
To test out Nathan C.'s hypothesis, I made a call long enough for the 3G screen to go dark. Lifting it away from my ear, I verified that it was not waking up as it should. I then flexed the upper part of the Jam Jacket's case to reposition the proximity sensor cut out and VOILA! the iPhone screen wakes and I can press the Hang Up button as usual. Now my only issue is whether to modify the cut outs and continue using this case or buy one that avoids the source of the problem.

HT1430 iphone screen goes blank

Has anyone run into the issue where they phone is working one minute and then the screen goes blank for hours. I try resetting and even restoring via iTunes. Oddly enough it has come back on twice but again then has the same issue.
There doesnt to be many other options out there at this point and open to all suggestion, thanks!

Kadelcn wrote:
Already Restored it. But the result is same. Pls suggest alternate way
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Macbook air issues with osx mavericks - screen goes blank

I have a late 2010 MacBook Air 11". When I open the screen several time during the day, the system hangs and the screen goes blank. I usually have to reboot several times to get the Mac to come back. Any ideas as to what is happening.

The keyboard and trackpad reside on top of the motherboard and all the components of the computer. The keyboard and trackpad are not liquid proof. It is VERY likely that the liquid made its way to the motherboard and has affected those components. If EVER there is liquid spilled on a computer, the last thing you want to do is A. Turn it on to make sure it is working.. and B. Plug it in and charge it. Do the EXACT opposite. Unplug and turn off all power, and, if possible, remove the battery from it. The liquid itself doesnt do the damage...the damage is done when the liquid comes in contact with the circuits and shorts out the contacts and components. You could try to connect to an external monitor, if you have the means to do so, to see if it makes a difference, but it probably will not. I seems that the motherboard is not functioning correctly.

My ipad 3 screen goes blank randomly

i have owned my new ipad 16gb (3rd gen) for 3 months and for 2 months it worked great with only having a couple of crashes, but then the screen started going randomly blank. I thought it may just need a reset but it started doing it again and again no matter what your doing apps video email everything. When the screen goes blank the backlight is still on if you had any sound playing you can still hear it with no image? To get the screen back on i press the wake/sleep button to switch the screen off then the button again to get the unlock screen back, then as soon as i unlock it returns me to what i was doing before the screen went. Its in repair at the moment having just come back from repaire last week but apple repaire couldnt find anything wrong with there service. Has anyone else had this problem?

go to settings>general>autolock and see what you have it set to. see if setting it to a higher time or never helps you out.
you don't happen to have a magnet on your right wrist do you? you might be triggering the ipad smart cover sleep with it.
Just two theories.

N93 Screen Goes Blank & Comes Back On (Auto-restar...

Similar Messages

Maybe you are looking for