N9400GT Temporarily Hangs XP when plugged in
Hi, I have N9400GT-MD1G ( V157 Ver 1.0 ) card and am going slowly nuts. If the card is in pc, applications hang and take time to open ( anywhere up to a minute ). I have changed: MB, GC, Ram, CPU, HDD and reloaded OS. Also downloaded latest drivers for GC. I then changed PSU to 500watt unit. Still same issue. If card is out PC runs fine. MB = MSI-7529, Total Ram = 2 x 2GB Apacer PC6400, with CORE 2 Duo E7400 CPU. Anyone got any idea's. Is this a voltage issue or setting in Bios that needs to be changed. Thanks
test it in another pc
Similar Messages
-
Hard drive works, but when plugged in hangs the system
First of all, since this is not a Linux-specific problem I'm not sure this is the right place for this post.
Anyway, for the past few years I've been using a 250GB IDE hard drive mostly to store backups on. For quite a while it worked fine, but when plugged in again after being removed so I could clean out the dust in my PC it didn't work quite right anymore. It caused the system to hang and gave error messages remniscent of those detailed on this page. After some fiddling it worked OK for a while, and then one day it randomly did this again. I took the ribbon cable out, then the hard drive, and realized one of the pins was pushed in (at the time I thought it was broken). After some reading I decided to sacrifice a ribbon cable. What I did was yank a pin off of an old DVD drive that doesn't work and shoved it in the cable where the short pin was. I made sure it was seated well, plugged in in, and hoped for the best. To my delight it worked without a hitch for maybe a year or more.
And then a little more than a month ago we had lightning strike a power line outside of our house and it fried my motherboard. I now have a replacement board, but after all of the taking apart and moving around and stuff, the hard drive is back to its old antics. The pin-in-the-cable trick wasn't working anymore. After I realized that the pin wasn't broken half-way but rather pushed in, I grabbed some needlenose pliers and pulled it out. It now will plug into any ribbon cable just fine and the computer recognizes it, but it's slow at POST and hangs the system when booting the OS, whether it be Linux or Windows. Knoppix CDs boot just fine, although slower. S.M.A.R.T. sees no problems.
Basically I'm wondering 2 things. First of all, is there anything I can do to get around the hangs? And second, I'm considering buying an external hard drive enclosure for regular 3.5 inch hard drives and using it as an external USB drive. Since the drive does still work and I can add/remove stuff while booted in Knoppix, and the main issue seems to be my system hanging, I figure, maybe, I can just plug in the drive when I need it after the computer is already booted up and it will work fine. Does this sound like a reasonable expectation?What you hear may sound like it's the hard drive, but it's really an electronic type of noise. Same with my PB. Try what BGreg said, and wait for the drive to spin down - you'll still hear the noise.
There was a thread about this issue several months ago, and IIRC the conclusion was that it's a normal noise, and that you should just ignore it if possible.
If you must make it quieter, set processor performance to the lowest setting in Energy Saver preferences. But it's not going away completely. -
How do I fix firefox, which hangs when plug in container starts?
Firefox hangs or freezes & I can't click on anything when plug in container shows up (see it in task manager).
There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Flash 11.3.300.257, in particular, can cause crashes. Please check out these articles:
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]] -
After updating my plugins firefox 5.0.1 still hangs/freezes when loading web pages.
After making sure my plug-ins were updated, firefox 5.0.1 hangs/freezes when loading web pages.
I changed the setting, but unfortunately, this didn't fix the problem. This situation does seem to occur more, when I load or reload my eBay home page. I noticed that all data and information would go ahead and load, but the random ads bar would not immediately load and when I would left click anywhere on the page, Firefox would temporarily freeze, the page turns white, Firefox not responding will display, and then the banner would load and everything is fine. I'm wondering if it has something to do with my Flash Player. Any additional suggestions would be greatly appreciated. Thanks! Reggie
-
Windows 7 hangs when creating a new folder and hangs again when renaming it.
Ok, so I have a problem where Windows 7 hangs when creating a new folder and hangs again when renaming it.
I have documented this problem on my blog here:
Windows 7 hangs when creating a new folder and hangs again when renaming it Rhyous's 127.0.0.1 or ::1
This has my hardware details, etc...
I consider myself an expert at troubleshooting (being in support for over 10 years including time as a Lead Technician doing Windows 2000 support focussing on performance), and have checked quite a few things to try to pinpoint this issue, but I just can't find the cause.
I am asking others if they have seen this issue. I need to know if it is only on my workstation, or if others are seeing it as well.
Have you ever right-clicked, chose new folder and then had to wait 45 seconds for a new folder to appear.
Then the same thing when you try to rename the new folder, a hang of about 45 seconds before the new name take affect.
Anyway, let me know if you have experienced ths.Hi,
I suggest you temporarily uninstall the antivirus program to check the issue. You need to make sure that you have the installation file to reinstall it later.
If it does not work, I suggest you also test the issue in Safe Mode and Clean Boot to determine if this is a hardware or a software issue.
Good luck!
Arthur Li - MSFT -
IPHONE 5 weird screen responses when plugged in
I noticed recently my IPHONE 5 6.0.2 has started to act weird when plugged in, I am on my third iphone 5, Returned the other two firstly becaue of battery issues and then wifi issues now its crazy when plugged in. It is as if the touch screen has become electrified...if i am typing a message on the keyboard it will randomly go back to messages, or jump to the edit screeen. If i am on the home screen i have to touch apps like three or 4 times to get them to open. It only happens when the phone is plugged in. I am using the cable and plug that came with it plugged into the wall socket. Hang on to i test plugged into my computer.,......same even more spastic if that was possible whaaaa whaaaaa whaaaaayyyyyy is this happening to me!!!!!
did u test it with another charger?
-
Laptop unable to startup when plugged in
Hi, I have a laptop operating on Vista that won't startup properly when plugged in to power but will start up when operating on batteries. Once the computer has booted up and windows completes its startup I can plug it in and there doesn't seem to be any other problems but it is very annoying. Has anyone experienced this before?
No replies- can I be a bit more specific- When I say it doesn't start up properly, I mean that it hangs on the bios start screen and won't go any further. Then I have to close down, wait for the battery to charge, start up again and let "windows" go through the diagnostic crap for 10 minutes then restart it again only on batteries. After the machine has started, ...completely loading "windows" I can plug in the power cord and operate normally. Any ideas??
-
When plugging Apple TV into my samsung tv hdmi port nothing comes up. Actually my Sat TV plays on that same HDMI inport
Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video. -
IPod does not respond at all when plugged in
Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up. -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
Help greatly appreciated.Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this
-
MacBook Pro Mid 2012 freezes when plugged in
Hi. My Mid 2012 MBP which runs on Yosemite 10.10.2 keeps freezing even when just browsing on Chrome so I uninstalled Chrome and used Safari. I was still having problems after switching browsers so I restored my device to its factory settings but the restore did not solve my problem. All this time my device was plugged in so I unplugged it and tried to browse. It did not freeze or crash. I read the forums and found out about the SMC reset and a NVRAM reset but my device is still freezing when plugged in. I am typing this while my MBP is unplugged. Please help.
Reset the SMC again:
http://support.apple.com/en-us/HT201295
Then try s safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Run an Apple Hardware Test:
https://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
Ciao. -
I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab
Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!
-
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?
You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.
Maybe you are looking for
-
No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells a
-
Uninstall Safari 4.1 and go back to 4.0
I think I need some help , I want to uninstall Safari 4.1 and install Safari 4.0.
-
Suppose I have an abstract interface which has one method: public abstract interface IParent { public void setSignal(int signal); }And I have a concrete interface inherited from IParent which also have one method: public interface IChild extends IP
-
Why do I get static sound when I use a headset splitter iwith my macbook air 13"?
Why do I get a static sound when I use a headset splittter with my macbook air? The headphone works perfectly but when I put the mic in the splitter, the sound gets a little bit static. Any advice will be greatly appreciated. Thank you! Cheers, franc
-
Annoying iCloud sign-in popup, blocking entire iPhone
Hello all, Since I last rebooted my iPhone, an iCloud sign-in popup has been appearing, overlaying everything else on the iPhone. Now, I have reset my AppleID password and cannot login using it on my iPhone. This is not strange as the pop-up is so ag