N95-1 dont work?
last week, my cracked screen finally completely broke down.... the crack covered the whole screen and the lcd stopped working.... i do not know why it happened as the crack was only covering like 1/3 of the screen until that day. anyways, so i was on the bus listening to music with my cracked screen. then suddenly it broke down... and when i try to restart it, doesnt work so i took off the battery and turn it off.
so i went home and turned the phone back on (even though it have a cracked screen) and try to see whats wrong. somehow, there is no welcoming sound and when i press any bottom, it just kept showing beeping sound.
so then i decided to order a screen. (i do not know what type of screen i need so i just ordered one even though the site said its mp1.0 and i should check)
anyways now today i received the screen and noticed that my screen is mp1.1 and that is mp1.0
seems like ive ordered a wrong screen, however, i decided to install it anyways.
so then with the screen installed, i turned it on, and i could only see a screen of white and nothing else. i doubt thats the screen's fault as its brand new. anyways i didnt hear any welcoming sound as usual and then i try pressing bottoms... there goes the beeping sound again...
so then, did my phone broke down?
Hi Patrick,
The property that opens the iView in a new window is "Launch In=1" (this is for EP6)...
I hope it helps.
Best Regards,
Laiz Martins
Message was edited by: Laiz Martins
Similar Messages
-
my iphone dont work what to do ?
i bought my iphone 5s before 8 months.
i went to idigital store that said me i havent 1 warrenty there .
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks yousnans wrote:
my iphone dont work what to do ? - what doesn't work - maybe add some details
i bought my iphone 5s before 8 months. - where did you buy this phone
i went to idigital store that said me i havent 1 warrenty there . not international warranty only in the country the phone was purchased.
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you -
My speakers dont work , headphone jacks do
Try reset SMC
see
http://support.apple.com/kb/ht3964
and Pram
http://support.apple.com/kb/ht1379 -
my facetime dont work whith lion
Hello, friends.
In order to run FaceTime on Lion, solving the server registration issue, you must create a new password key in Keychain, with the following parameters:
Name: com.apple.facetime: registrationV1
Account: registrationV1
Where: com.apple.facetime
Then, restart your Mac.
Best regards! -
Dont work dimms 2- on K8N Diamond
Hi, i have problem with DIMM 2-4, if i put any memrory ram in the DIMMs 2 or 4, the BIOS give this error (using the led):
Quote
Testing onboard memory size. The D-LED will hang if the memory module is damaged or not insalled properly
But if i put ram in the DIMMs 1-3, work without any problem, also work if i put memory in the dimms 1-2-3-4, but only recognize the ram who is in the dimms 1-3.
I try to reset de bios and upgrade it to the last version, but dont work. Please anyone help me
pd:sry for my english :(Quote from: finord on 13-February-07, 02:14:15
I try to install 2x256mb(at the moment i have 2x512 kingston value ram, in the dimm 1 and 3), i use a signle mode, but the problem is the dimms 2-4, if i put only 1 memory ran (kinsgton value ram) in the dimm 2 o 4, dont work
that is normal, when using 2 memory sticks always put them into 1st DIMM slots(close to CPU socket.) about 4 sticks usage and 2 of them are not detected, can be due your mixing memory (ranks & banks, and CPU mem.controller cannot handle it) what CPU core you got btw? im still not conviced its DIMM slots failure. also before installing all 4 memory sticks setup from BIOS command rate to 2T, and apply memory index 166. also you have insterting all 4 stick in wrong direction. put in DIMM1 & DIMM2 Kingston sticks(instead DIMM1 & DIMM3) and 2 other once 2x256 into DIMM3 & DIMM4 (instead DIMM2 & DIMM4)
re-test. -
Dont work dropdown list in Variation Label Menu on one variation site
Hi, guys! I have trouble with Variation Label Menu. I have site with four variation language and i made Variation Label Menu using code on my master page
<div style="float:left; margin:6px; z-index:9999">
<PublishingWebControls:VariationsLabelEcbMenu id="variationLabelMenu" DataSourceID="LabelMenuDataSource" DisplayText="" IsCallbackMode="true" runat="server" />
<PublishingWebControls:VariationDataSource id="LabelMenuDataSource" LabelMenuConfiguration="1" Filter="" runat="server"/>
</div>
On three variation site Variation Label Menu work fine on UA, FR, EN
But on one site RU (this site is source for another) Variation Label Menu dont work :((
I will glad to any ideas for fix my problem.
Aleksandr ShramkoBut that should have changed the logic of the navigation:
The VariationDataSource control supports three different operation modes using the LabelMenuConfiguration attribute:
Link to Peers: this is the default and most common operation mode. In this mode, the data source returns links to peer pages of the current page.
LabelMenuConfiguration="1"
Link to Parent: using this operation mode the data source returns links to the peers of the parent site. That link will not point to the peer page but to the peer site of the current site.
LabelMenuConfiguration="2"
Link to Top Site: using this operation mode the data source returns links to the top sites of peer labels.
LabelMenuConfiguration="3"
http://blogs.technet.com/b/stefan_gossner/archive/2011/11/29/sharepoint-variations-the-complete-guide-part-12-customization.aspx -
please i love mozilla and there is times what i want to translate any text from english to spanish but nothing i tve tried all the adds to translate but no load they is installed in my browser but simply dont work. tell me what can i do ?
Everyone reading your posts here is just another MacBook Pro user. We're all volunteers, not Apple employees. No one here can speak for Apple.
In my personal opinion, buying Apple products in a country where Apple has no stores and no corporate presence is a risk that the buyer takes knowingly. I don't think it's a wise risk, and I don't recommend that anyone take it. A small percentage of the products sold anywhere are going to have problems, and it makes more sense to buy an inferior product that can at least be serviced locally than to buy a superior product that may have to be sent thousands of miles for repair if anything ever goes wrong with it. -
Dont work driver on Scanner ScanJet 300 on winows 7
Please, create new drivers for Scanner ScanJet 300 on Windows 7 platform. I have this divace. Dont work it on Windows 7. Windows 7 and drivers of ScanJet 300 scanner are not complianted.
Hi @Per-Morten
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Scanjet 5400c Scanner Drivers page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
i bought e75 before 3 month in icad uae.when i repair softwore dont work . It has no guarntee/warenty?
Are you talking about the software (applications) installed by you ? If so, during repairs it seems the phone was reset or reflashed.. and you will have to re-install those applications..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box... -
Hey! I have a question for everybody...when i want to use some loop they dont work...Its like they are not instaling in my computer...what can i do? Thenks!!!
http://www.bulletsandbones.com/GB/FAQPages/NoLoops.html
-
I am trying to view the two viewlets on the following links and they dont work.
http://otn.oracle.com/tech/xml/htdocs/XDBDemo1_viewlet.htm
http://otn.oracle.com/tech/xml/htdocs/XDBDemo2_viewlet.htmlPlease post this at XML DB forum:
XML DB -
i get error ORA 12154
i have use SCOTT/TIGER and MANAGER/SYSTEM
they dont work.
this is my tnsnames file in admin::
# TNSNAMES.ORA Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = beinke-dac02b93)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL)
I do not have a data base insatlled.
Second question:
How do I load 2 downloaded CD's. I want to get the info on the second disk to load???
SidORA-12154 indicates that you're having problems connecting, not that you're having problems with passwords.
If you don't have a database on your local machine, what database are you trying to connect to? You'll need to contact the DBA of the remote database and ask for the connection information (SID or SERVICE_NAME, HOST, PORT, etc).
I'm not sure what you're asking with regard to the downloaded CD's. Is this data you're trying to load into a database? Are these Oracle CD's?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Hi,
my SUS dont work. i have entered for all clients WGM the SU LInk: http://server.company.com/sucatalog.index but the client always uses the Apple SUS of web.
i checked in the library of the client the su link... and everything was pointing to my server.
maybe someone had the same problem ?As the previous poster mentioned, that's the correct url if your clients are on 10.4.x. 10.5.x and 10.6.x require different URLs. Also, are the machines bound to the server?
Even if you enter the wrong URL, if clients are getting preferences from the server, it should still be presenting you with updates from your server (just not all of them since you'd only be getting 10.4.x updates) -
my ipod mini dont work by that i meen it will not turn on i tride to restart it but that dosnt work also to connect to the cop but it dosnt react help me i need it as soon as posibol
Is it dead or something? Try plugging it into the wall, and, while it's plugged in, hold down MENU and SELECT for at least five seconds. (Make sure the hold switch is off).
-Michael -
my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is laggingmy new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging
Maybe you are looking for
-
Problem with item of type DB column, reinitialized in a process
Hello, I have a problem with an item P216_username with source type=database column(empty in this case). In a process On Load-After Header(with a sequence number bigger then the Fetch Row sequence number) , I change the value of this item: :P216_USER
-
V$transaction used_urec but what is total available urec ?
Hi, I wonder if I can know how many urec (undo records or undo block) I've got as whole in database. So if v$transaction says used_urec = 1000 I know thats the 10% of all undo records available . DB is 9.2.0.8 . Regards. GregG
-
Interview questions: pre or post?
This may be a stupid question and it really doesn't fit into any 'box' as far as categories go. But I know quite a few of you are experienced shooters here. Question: If you're doing interviews for a documentary job, would you give the questions to t
-
Album order: missing track #
I have about 7300 songs in my iTunes library. Most of these I imported from the original CD using the "Get CD Track Names" to fill in the song names, etc. About two thirds of my songs have no Track Number saved (if you Get Info on a track, the little
-
Grey screen"no entry sign/question mark
My imac was working fine and then the browsers began freezing. Tried force quits but no apps came up in the window. Tried restarting and heard a loud beep followed by grey screen and folder with question mark. Took out all connections and tried start