N95-1 Mic Problem

Good day,
So after i opened up my cellphone, changed the faceplates and keypad my mic stopped working. i can receive calls and hear the other line but they cant hear me. please help. and where is the mic located?

Unfortunately it's against the rules of this forum to discuss warranty voiding topics like disassembly.
A nokia care point may be able to help you but they will charge for the service as you have voided your warranty. They may also choose not to help you as you have modified your phone.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Similar Messages

Help needed with HTC One regarding mic problem with noise cancellation

I picked up an HTC One last week, and so far I am loving the phone. Great build quality, screen, sound - all as advertised.
However, there is one very annoying problem I am having. When I am talking to someone, I can gear them great, but they keep telling me I sound muffled or robotic. I performed some tests, and the problem appears to be something with the dual microphones and the HTC One's noise cancellation features.
Here are the tests I ran:
Typical phone call, with holding the phone as I normally do on the sides and to my ear. Call result, pretty muffled voice. I'd give the call quality a 5/10.
Help the phone as I typically do, but covered the mic hole on the back of the phone. This definatelyimproved call quality. Was louder and clearer, but not perfect. I'd rate it at 8/10.
Help the phone towards the bottom, using my hand to kind of cup the bottom directing the sound to the bottom mic. This was a further improvement in sound quality. Rating would be 9/10.
Help phone as normal, but covered the bottom mic hole. Very low volume and muffled sound. Rating a 4/10.
Talked directly into the bottom of the phone into the bottom mic. This gave perfect call quality and volume. Rating a 10/10!
Talked directly into the mic on the back of the phone. Horrible quality, couldn't hear hardly anything. Rating 0/10.
Speaker phone on, held the phone up and moved it around as I would normally use a speaker phone. Call quality was really nice. Id give it 9/10.
Speaker phone on, covered back mic hole and used speaker phone as in #7. Very bad quality, rating 1/10 for call quality.
Speaker phone on, covered bottom mic and help speaker phone in hand. Really good quality, even an improvement over test #7. Would give the call quality a 9.5/10.
Speaker phone on, placed face down on table. Volume a bit low, a little muffled. Call quality 6/10.
Speaker phone on, place face up on table. A bit worse than test #10, low volume and a bit muffled. Call quality is 5/10.
Based on these tests, I know this problem has nothing to do with the network CDMA connection. It is obvious that the noise cancellation features are a bit too aggressive, or I have some hardware problem with one or both mics.
I question wether its really a hardware mic problem, because on non-speaker phone calls, talking directly into the bottom mic gives great quality. And on Speaker phone, covering the bottom mic makes the speaker phone sound really good. That's why I think there's something going on with the "Sense Sound" noise cancellation.
Is anyone else seeing the same issues? I want to be able to hold the phone normal on a non speaker phone call and get good quality.
Looking for any tips and advice anyone can give. Is it worth exchanging for a new one, as I am still in my 14 day window.
Thanks in advance for the help!

Here are some other threads that seem to be having similar issues:
http://forum.xda-developers.com/showthread.php?t=2262648
http://forum.xda-developers.com/showthread.php?t=2294532

Mic problems with all boards thread! What do we do to fix this or do we need a new boa

I have come the conclusion that this is not just a mic problem but a uni'versal line in problem since several devices can be connected thru my SoundBlaster Li've! 24-bit line in port. I'm assuming its a software problem and it seems to be a common problem. The second possibilty is that part of the board is either defected or assembled incorrectly. Either way everyone seems to have made sure that:
A. there drivers are up to date.
B. they have dissabled any other audio device in windows or in BIOS.
C. there mic won't work no matter what port they attempt.
D. creative software changes of audio devices and mixer still don't change anything.
I came on here for answers yet all i find is questions.
And all seem to be pretty similar. There are many other posts pertaining individual audio cards, yet they all have the same problem. If your having the same problem post here and keep this thread ali've, if you have an answer to your own problems you'd like to share post it here. Hoping for a Creative response to either my post or one of the many other posts on the same subject.Message Edited by syferus on 09-23-2005 0:30 AM

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

Mic problem & warrenty issue .

Hiii
I have iPhone 4S which is having mic problem i guess.During voice calls the call receiver at other end unable to hear my voice on handset mode but on speaker mode he can hear my voice.
Also wanted to know in which country my phones warrenty is valid .
iPhone4S
Model: MD241LL/A
Serial No.: DNPHN0Z3DTD6

Hi Alankar,
Make sure your iPhone case is not covering the mic. It is on the bottom to the right or left of the connector. Have you tried a call without a case on the phone?
Your Model Number indicates that this is a US phone, so the warranty would be valid in the US.
Cheers,
GB

Re: Mic problems

message me back let me kno some options to fix my mic problems please skype

wityh me i dont have head phones and only use the mic that the pc always used.i have an hp 2000 laptop with windows 8.1 installed

Audigy 2 ZS/ Teamspeak/ Mic Problems/ SOL

I gather from other posts im not the first and probably not the last to have problems with my SB card and Teamspeak Mic function, after MANY painful hours of reading this forum, downloading drivers, reinstalling software and countless tweaks to my SB mixer and Teamspeak options I finally got my Mic to work right. Hopefully my pain will help someone one else, I was ready to give up on my Mic/SB card ever working right till I stumbled on what appears to be the fix to to Mic problem, I made so many changes I will list them all as Im not sure that it isnt the combination of any or all things that made it work,
My set up, front Mic and Headphone jack on computer,
-Go to SB mixer function, above the first volume knob is a red arrow, click on it, it will say digital only output, SELECT this option, turn volume up
-reading left to right on the middle part of the mixer, turn the function ON the first 3, turn off the the following 3.
- the 6th funtion should be set to microphone, click on red arrow above mic picture and turn on mic boost function.
-Teamspeak setting, go to options screen select "wave" sound, click ok and adjust in and out volumes on settings panel.
This did it for me, I went from no mic, to fuzzy mic, to crystal clear mic after playing with things for 2 days.
I have new faith in my SB card and hope others are smarter than me and figure it out with out all the research good luck.

In the Creative Mixer on the right hand side you should see a separate column with a "Rec" heading. There should be a small upside-down triangle. Click on that and you should get a list. Choose "Analog Mix" which includes Microphone, Line-In, etc. Then to the left, un-mute the source you want.
ErictheRed wrote:
Happy New Year to all.
I have installed 2 ZS card. Output works well. I want to record a couple of old vinyl albums. I cant either through Creative Surround mixer or through windows get either a Line-in or microphone input to select from. I have tried everything but this forum. If anybody has any ideas it would be greatly appreciated.
Thanks
Eric

Ipad 2 mic problem

1. My mic just suddenly has gone out of service. Only some scratching sound can be heard during video recording.
2. I bought my iPad 2 in NY, March of 2011 - I am currenlty in Saudi Arabia,
a. Is there any shop that can accommodate me to fix this mic problem?
b. I have got only a scanned copy of the receipt from the Apple Store in Palisades - am I still covered with a warranty using this scanned copy?

Yes, hold a finger longways over most of the nozzle (if you have one) to confine the suction to a specific area. Also, do it for a prolonged period, and gently use a common pin to loosen any foreign matter that my be in it!

I have mic problem while making video and while on loudspeaker its reduce the mic volume alot.

i have mic problem while making video and while on loudspeaker its reduce the mic volume alot. plz help me out

iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT201328 People can`t hear me during calls but i can hear them (probably *not* a mic problem)

I unlocked the iPhone From AT&T, its working well in browsering and i can hear people in calls, but people can`t hear me (even with earphones! it`s not a mic problem!!) help me please..

I had the same problem this morning. I tried reset on phone a few times. Nothing. Then I restored it from iTunes and it worked fine. This has happened to me before -- don't know the root of it, but restoring has worked so far. Good luck.

3GS Speaker Mic problem

I have a mic problem with 3GS 32GB running latest software v3.1.2. It works fine when making calls in standard mode, but the mic does not increase its sensitivity in speaker mode so that people can barely make out my voice. Speech is virtually inaudible speaking at it from just 30cm away. I tested it and there was no difference in mic volume between speaker and standard mode. The mic mesh is clean, and removing the phone cover made no difference, nor did restoring the iPhone or changing the SIM/carrier. I took it to the local Apple retailer and 3 other 3GS phones tested all had the same problem, but a 3G worked fine and calls were easily heard in speaker mode. Is this a problem with all 3GS phones?

I have found it myself. When Skype is running at the back plan, the app is routing sounds to ear speaker. Quitting app, solves the problem. This reply is for whom experience the same problem.

Mic problem in window 8.1 Pro ???

My Mic is not working in skype what i do ??? Mic is working well in sound recorder but not working in skype plz guide me . i am using external microphone .

To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

Anyone else having mic problems after 5.1?

I updated to ios 5.1 and now Siri and the voice memo can't hear me unless I hold the phone to my mouth literally shout into the mic. Anyone else have the same problem? I think it's just the iOS update.

I have had problems with my mic, only since updating to 5.1 last week. Intermittently, during a phone call, I can hear the other person saying, "Hello, hello, are you there?" and sometimes after about ten seconds or so they can hear me again. But it goes in and out and is very frustrating. I've never had this problem before and have had iPhones for years. Will have to go to the genius bar I suppose. Hopefully I'm still under warranty.

Mice problem in solaris 10 6/06

Hi friends
as Fabian helped me , regarding soughting out my graphic problem , now othetrproblem has occured , at startup my solaris detects my mice fine , but one i used to make logoff after that my mice disappears , pls help me to solve this prob.

To answer your question wangzh: Yes I did. I actually followed exactly the procedure on the how-to-uides: http://www.sun.com/software/solaris/howtoguides/containersLowRes.jsp.
I think the problem here might reside in the script supplied in the solaris distribution for creating zones. For example, in the default configuration script, the package directories /lib /platform /var and /usr are by default set to be automatically imported. But when I try to create a zone using these defaults settings, it ends up with an mounting error that prevents the installation of the zone. only when I remove manually those directories from the configuration then the installation continues.
And during the installation process there are number of packages that are by default imported via the installation script and this is some of those packages that cause the errors here. I also tried to exclude the offending packages as suggested by henryC but I couldn't find all of them and the creation still fails at the booting.

N95 in Emulator is Fine but N95 device has problem

Hi all,
I am creating a video based application for N95 which enable
running video(.3gp) in normal to rotate(90 degree) and display in
full mode so i tried it with Adobe Device Central's Emulator and it
is working fine (Note: Emulator was update on 24th sept and adobe
has released update on 22nd sept)
but in actual device it is not working fine (means rotation
is now happening) also i have updated N95's firmware from 21.0.016
to 30.0.015. my N95 has flash lite 3.0 standalone player too but
problem is same, kindly look at this..
Device : N95 with 1GB
Firmware : 30.0.015
Flash Lite Player: 3.0
OS: Symbian 9.2
thanks
Maneesh Panwar

Hi Maneesh,
Thanks for pointing this out, we'll look at it.
Mark

N95 WLAN Connection problems - Orange Livebox (UK)

I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

hi,
did you press "1" button at the back of the Livebox before pairing ?
what kind of error message do you get on the N95 ?
does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
Cheers,

N95-1 Mic Problem

Similar Messages

Maybe you are looking for