N95-3 disconnection from laptop error

Everytime i disconnect my n95-3 via memory card eject, it automatically connects again straight away. So i have no option but to disconnect it via safely remove. When i do so i then get error on phone stating data may have been lost. data transfers should be stopped before removing the cable. Either way its a no win situation with an error.
History is a mirror of the past!
And a lesson for the present!
(Persian Proverb)

I mean the connection settings called "USB". There you can choose a default mode for the connection. I wondered if you have set that to "Data transfer". And mainly the second point of that menue "Ask on connection": if you have set that to "Yes"?
Sometimes the solution is closer than you think... sometimes farther

Similar Messages

HT1320 Ipod 4th gen was accidentally disconnected from laptop during update process. Now permanent screen pic is of power cord w/ an arrow pointing up to itunes. Holding the ctr & power buttons together has no effect for reset.

Ipod touch 4th gen was accidentally disconnected from laptop during update process. Now permanent screen pic is of the power cord w/ an arrow pointing up to itunes symbol. Holding the ctr & power buttons together for 6-10 sec causes apple pic to briefly appear and power cord/itunes pic reappears. Powering off and on has same effect. Attempting to reset.

It sounds like the iPod touch is in Recovery Mode, Try to restore it from iTunes again.
If you run into an error when restoring the iPhone again, take a look at this Apple doc -> iOS: Resolving update and restore alert messages

I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

N95 not disconnecting from 616 car kit correctly

We have 2 cars that have 616's and users with N95's. Both kits fitted professionally to a BMW and a VW, and phone as kits are about a year old. Everything has been working great, but over the last month they have both developed the same problem, where the N95 still thinks it's connected to the kit, and needs restarted. They can then go back into the car again and it connects fine. The firmware on the phones have been upgraded, but the problem still happens.
Does anyone have any ideas, is it the phones or the car kits that are having the problem?
They are connecting to the kit in sim access mode.

Thanks for your help.
When I wrote my post there was no special N95 compatible version of the contacts downloader.
Meanwhile there is a compatible version of the contacts downloader and with it I am able to download my contacts from the N95 to the Nokia 610.
You can find the N95 compatible version in the download section of the Nokia 610.
click me
Sincerely,
CandidMessage Edited by candid on 09-Dec-200710:26 PM

HT204051 ipad disconnects from laptop via usb

i plug my iPad into the usb to do a sync, and it disconnects and reconnects instantly.
Simple sync is all i want to do.
Many thanks for your solutions

its an iPad 2, it has always worked, when i connect to the wall the iPad charges normal.
when i sync my iPhone 5s the usb works perfectly.
when i do the same with the iPad i open i tunes and it just repeatedly turns off and on instantly.
I tried another cable usb same problem.
Many thanks Allan

N95 - emails vanish when disconnect from server??

Hi,
I've set up my N95 to send and receive emails - its doing both even though when I "send" it says server not found but the email DID arrive at its destination..??
My other problem is that after I have downloaded emails to my phone and I then disconnect from the server - when I then goto reconnect those emails dissappear.. Is there a setting to stop this from happening?
can you help me with eithe rof those issues?
Thank you
Angela

Good luck with that. It most likely has something to do with the network, and Bridge is really not set up for network function. It works that way but Adobe says there are so many variables with networks that can not be quantified. Not sure but if Bridge does error checking like Photoshop does it could lead to what you see.

Root pwd reset - error. unexpectedly disconnected from boot status daemon

Hi All,
I forget my root pwd in RHEL 6 Linux.
I have installed Virtual box in my laptop and installed RHEL 6.
While trying to login with single user mode it shows this error "error. unexpectedly disconnected from boot status daemon".
Step i followed to restet my root pwd.
1. GNU Grab window
2. pressed ' a ' and entered single to login in single mode user
<hkernal =auto rhgb quiet
i tried with,
<hkernal =auto rhgb quiet 1
<hkernal =auto rhgb quiet single
3. some it shows "error. unexpectedly disconnected from boot status daemon"
4. if you tried few more time shows below
Telling INIT to go to single user mode
init: rc main process (742) killed by TERM signal
[root@ram /] # passwd
[root@ram /]
5. i entered passwd root cmd also nothing happened to reset the pwd.
[root@ram /] # passwd root
[root@ram /]
6. tried with su -l
[root@ram /] # su -l
[root@ram ~] passwd
[root@ram ~]
help me to reset root pwd
Thanks in Advance !
Regards,
Ramprakash Arun.
Edited by: Rampraksh Arun on Mar 19, 2013 1:09 PM

Moderator Action:
Your post has been moved from the Oracle Linux forum, to the Generic Linux forum.
You have stated you are using RHEL and are not using OL
Comment:
There is no help for Virtualbox environments at these OTN forums.
Virtualbox has their own web site and their own forums.

BEx Error: Automation error: Object invoked has disconnected from clients

Hi,
We have a user here that attempts to access a query in BEx (MS Excel), but receives this error message:
- Runtime error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Any ideas.
Thanks,
John

Please go through the OSS note 857360..
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=857360&_NLANG=E
This talks about your error..
Solution
1) Replace the RFC library
librfc32.dll
on the client PC with a current version.
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
There is a version of the 620 and 640 librfc32.dll in the attachments: and we recommend that you use Version 640 (compatible with SAPGUI 620) (see below).
620 Version: Download librfc32.rar. Rename it librfc32.exe. This file extracts itself automatically.
640 Version: Download librfc32.zip. You can use WinZip to extract this file.
Note:
It seems that newer (delivered) versions of 6.20 librfc32.dll do not contain this fix. In this case, you can also use the 6.40 librfc32.dll. For reasons of compatibility, you should use the following Microsoft DLLs that are available on the PC for this: msvcr71.dll and to be msvcp71.dll (see Note 684106).

Error during disconnect from FTP Server

Hi Everyone,
Here's my problem:
XI has stopped picking the messages from the repository of one of servers. Though, we have checked the XI system and can find no problems from the infrastructure side. The adapters also show no errors and the communication channels show no errors.
We have also checked the log viewer in XI and found the following entry:
"Error during disconnect from frtp server ABC, ignored: com.sap.xxx.adapter.file.ftp.XXXXXX: 421 Terminating Connection."
This FTP error relates to what we FTP server says, "421 service not available, remote server has closed connection."
We looked at the server side, the server is working fine.
What do you think is the error? And do we resolve this one? I'm really clueless about this..Im thinking of just restarting the J2EE engine...
Thanks,
Grace

Mary,
This question would be more relevant to the Xi forum... but on googling the error code..
http://help.globalscape.com/help/support/Error_Codes/FTP_Codes.htm
Error 421 Service not available, closing control connection.
Error 421 User limit reached
Error 421 You are not authorized to make the connection
Error 421 Max connections reached
Error 421 Max connections exceeded
Possible Solutions:
You may receive a 421 error if the FTP server you are connected to limits the total number of connections available or limits the connections available to one user. There are three things you can do:
1. Limit the number of connections to any one FTP site by selecting Tools > Global Options > Connection and set "Per site max connections / transfers" to 1 (By default it will be set to 2).
2. Remove items from the Transfer Queue. The Transfer Queue is where you see items ready for transfer, in transit, or just transferred. Sometimes the Queue Pane can become cluttered with unfinished transfers. To clear the queue, right-click inside it and choose Remove All.
Also try using an FTP manager like cuteFTP or something of that sort to see if you can open the connection - it could be related to the FTP settings...
Arun
Hope it helps....

How to resolve "The server is unavailable and could not be accessed. The server is probably disconnected from the network." error in Sharepoint serach crawl.

Hi all,
I have created a content source in Search service application for a particular site collection "http://spwebapp/sites".
I performed reset crawl index of Search service application and then performed a full crawl.
But i get errors on running crawl on this content source for most of the files. The error is "The server is unavailable and could not be accessed. The server is probably disconnected from the network." Though the site is accessible.
But before performing reset index the crawl was working fine on this content source. Crawl is working fine for other site collections. Only one site collection is facing this problem. Please let me know if what I can do to resolve this error.
Thanks in advance.

Are you seeing any error messages in the URL related to the Gatherer? And in your content source, are there any site URLs that are no longer active or do you have any crawl rules set up that might be affecting access to the site collection?
I've seen this happen for a variety of reason, SSL issues, proxy issues, permissions issues. The Eventvwr and ULS logs should help you narrow down the real problem.
Sometimes this is an issue because the indexer and the site are sitting on the same box, you could try doing a disable loopback check to see if that resolves the issue and if it does then go through the hassle of setting up a specific LSA :
http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

Why do I get the error message "iTunes Match could not download because disconnected from network? I'm connected to the internet during that time with Safari so am I not connected to the network?

Why do I get the error message "iTunes Match could not be updated because you were disconnected from the network during processing." I'm on the internet during all of this. What disconnect is the message referring to? Itunes is frozen now. I keep clicking OK but it just comes back with no action.

Hello FredJay,
Thank you for contacting Apple Support Communities.
iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
Make sure you have an active Internet connection
Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
From:
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/TS4054
Regards,
Jeff D.

IPod disconnected from iTunes when closing laptop lid

I recently received a new iPod Classic 120 Gb after the old one's battery died. When i connect the new one to my Macbook Pro and close the lid it disconnects from iTunes (it is still connected, it appears in Finder, just not in iTunes).
I got the latest version of iTunes and the iPod software. This never happened with the old iPod. Is there a fix for this?

Okay guys . I got some goodies up . For those interested:
- 2.6.22.12 kernel with CFS v22, hrtimers, powertop, Reiser4 and default CPU frequency governor 'ondemand'
- iwlwifi 1.1.21
- Authentec fingerprint reader driver
I guess that should get you going pretty much . The iwlwifi drivers have been built out-of-tree since my efforts to merging in the newer mac80211 stack & latest iwlwifi drivers amounted to nothing but a boatload of patch errors :-( (yes i can hack up patches to work but I felt like not doing it, since iwlwifi builds just fine out-of-tree). This kernel is tailored to the 6510 hardware, I cannot tell what is different in the 6170b lineup, but you definitely should not try this kernel on just any machine .
If you have any questions, drop me a line.
Credit of course to waninkoko for his kamikaze patchset, from which most of the patches come.
Update: to the latest 2.6.22.12 kernel + corresponding driver packages
Last edited by B (2007-11-11 16:39:48)

EXCEL VBA: Inserting rows code returns error "2147417848 The object invoked has disconnected from its clients"

I was executing the following code in Excel 2013 that is linked to a button I use to add multiple rows in a chosen section of a worksheet
Sub Add_Rows_dc()
Sheet53.Unprotect ("xxx")
X = Range("C1").Value + 1 'Section Counter
Y = ListSheet.Range("I" & X).Value 'Existing rows counter
Z = ListSheet.Range("H" & X).Value 'Position counter
Righe = InputBox("How many rows would you like to add?", , "1")
If Righe < 1 Then GoTo err ' test for invalid row number
RigheSheet.Rows(X).Copy
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
GoTo Fine
err:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
End Sub
From time to time it returns me the error "2147417848 The object invoked has disconnected from its clients" and the debug point out the line
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
I cannot find any specific reason due to the fact that the error seems randomic, sometimes the code is perfectly executed, sometimes not.
I wrote this piece of code in Excel 2010 and never encountered such problem before reusing it in Excel 2013
Has someone an insight or a suggestion?
Thank you very much

Re: strange error
Try it this way...
(might work, might not)
Sub Add_Rows_dc_R1()
Dim X As Double
Dim Y As Double
Dim Z As Double
Dim Righe As Variant
Dim Mess As Long
    Sheet53.Unprotect ("xxx")
    X = Range("C1").Value + 1 'Section Counter
    Y = ListSheet.Range("I" & X).Value 'Existing rows counter
    Z = ListSheet.Range("H" & X).Value 'Position counter
    Righe = InputBox("How many rows would you like to add?", , "1")
    If Righe < 1 Then GoTo errX ' test for invalid row number
     RigheSheet.Rows(X).Copy
     Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
    GoTo Fine
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
Exit Sub
errX:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
End Sub
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

Hi there Schusski,
I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below.
iOS: Restore errors 4005, 4013, and 4014
-Griff W.

N95-3 disconnection from laptop error

Similar Messages

Maybe you are looking for