N95-3 (NAM) - loading external data fails

Well, after extensive testing with my own code as well as
"sample" files provided by Adobe and Nokia for very simple data
loading (both for local .txt files as well as calls to a remote
server), the N95-3 (NAM) is just about useless. Fails each time.
Am a bit surprised that Nokia would release a phone without
first testing this functionality...
anyone have an "old" N95 they're looking to get rid of? Need
one *urgently* to test code for a project I'm working on...

Hi
I Have had trouble raching the network for some time.
Problem solved. My misstake, It was the cube that were set to transactional.....
I will credit A.H.P.
Thanks everyone!
Regards
Pontus

Similar Messages

Error 1 when loading external data

Hi BW( Best and Wise) friends,
I am not able to load data into my infocube. My source system is a PC file.
Message "Error 1 when loading external data is displayed." when scheduled.
When I checked the error details using Monitor button,
During extraction, the data request was arranged(indicated by green mark),but there was error in data request(red).
During extraction,data request was received (green),but there was some error in data selection(red).
Anticipating good solution.

HI all,
1.The flatfile matches with the transfer structure
2.The file is a .csv format file only.
3.The path is correct
I had chosen comma as my data separator.
I had declared fields in the following way in the XL csv file
Name of the candidate text
Name of the party- text
Age-number
Number of votes gained number
Calendar day text.
I had already tried the following.
When I clicked the preview in the external data tab of the infopackage, a window showing the preview parameters is opening. When I clicked the tickmark, message error 1 when loading data is displayed.
4. The details tab of the monitor showed the following:
Overall status : Errors occurred: or: Missing messages-red
4.1)Requests(messages):Errors occurred-red
 Data request arranged-green
 Error in datarequest-red
4.2)Extraction(messages):Errors occurred-red
 Data request received-green
 Error occurred in data selection-red
4.3)Transfer(IDocs and TRFC):Everything ok-green
 Info IDoc 1: Application document posted-green
 Info IDoc 2: Application document posted-green
4.4)Processing(data packet): No data-yellow
I had initiated the discussion in the forum with this information only.
Regards,
Balaji
Message was edited by: balaji vijayakumar

Load external data into se-main-menu

hi,
i've tried to load external data (vars,files)into a selfmade
sony-ericsson-flash-menu for the w810i.
it is possible to load the data for the current active menu
via loadVariablesNum("application://focused", 0);
so i thought i could load some other stuff into the mainmenu.
i tried to load an swf with loadMovie/loadMovieNum.
i tried to load vars from a txt-file with
loadVariables/loadVariablesNum.
and i tried to open a webadress with getURL.
but nothing happens ... :(
the files (swf,txt) are in the same folder like the
mainMenu.(tpa\preset\system\desktop\flash)
maybe the w810 does not execute the swf in the same folder
where it is at the moment?!
is it possible to figure out where the swf is executed?
the _url command is not supported by flash-lite-1.x ...
some ideas?

Hi Joanne,
LSMW - Legacy System Migration Workbench is very user friendly tool provided by SAP for legacy data load.
use link below for documentation
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
You can also, use SAP best practice PCC Excel Template and load programs (delivered by SAP) for each Infotype PA / PD.
Hope this helps.
- Bharat

How to load external data without using external tables

Hi,
I'm asked to develop an ETL for loading external data into a database but, unfortunately, the vers. is 8i so I can't use external tables.
I know that it's possible by using SQL-Loader. What I want to know is whether there's another way in 8i to load external data from a text file or a CSV file directly with a stored procedure without having to write CTL of SQL-Loader on the server. I mean, is there a way to write everything on the database the same manner I'd do whether I wrote data from a table to a file using for example UTL_FILE or the unique way is to write control files of SQL-Loader directly on the server?
Thanks!

Mark1970 wrote:
Thank you very much Karthick
I didn't know I could use UTL_FILE also for reading files. I've always use it only for writing data into external files.Yes you can use UTL_FILE to read. The version of oracle you are using i last used in 2004 :) Still remember giving the OS path of the file to open the file. That is long gone now. Its surprising that you are still in 8i.

Cannot access external data , Failed to get the document information.

Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJ

Hi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini.

Error 4 when loading external data

hi all,
I have unchecked uncheck currency conversion for external systems in my info package and then loaded the data from a flat file.
and then i am getting the below errors.
cost -> cannot be converted to currenecy (since cost contains currency item)
netval_inv -> cannot be converted to currenecy (since cost contains currency item)
/bic/zntwthpm -> cannot be converted to currenecy (since cost contains currency item).
if i check the option
currency conversion for external systems in my info package
then i am getting error 4 when loading external data.
Can anyone help me out!!!
thanxs
haritha

Hi haritha,
Please check whether your file whcih you are loading is open , when you are starting the Infopackage.
Also please check this SAP Note 600246 - RSAR 234: Error 4 when you load external data.
What is your BW System (Version/Patch)
Thanks.
CK

Error 3 when loading external data

Hi Gurus!!
I am trying to load data from a flat file into a Cube. The load is done by a process chain and have worked perfectly before. The file is located on the application server.
Now I get the following error:
Cannot Update Request REQU_DESUFKD2XA1LDREQ0KEJZ2TJC in Data Target
Error 3 when loading external data
The file looks ok when i compare it with the ones i received earlier.
Any ideas what this error 3 is all about?
Thanks in advance!
Pontus

Hi
I Have had trouble raching the network for some time.
Problem solved. My misstake, It was the cube that were set to transactional.....
I will credit A.H.P.
Thanks everyone!
Regards
Pontus

Routines for File name at External Data in Info Package level.

Hi All,
Can any one give the example codes of how to write the routine for Files at External Data in Info Package level.
Regards
srinivas

Hi Srinivas
Here iam attaching a sample code in the infopackage level this code is used to select the Current version from TVARV table ..based on the version from variable the data is loaded into the ods..
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'FISCPER'.
          l_idx = sy-tabix.
tables tvarv.
data: v_prever(6)   type c,
      v_fiscper(7) type n.
clear tvarv.
select single low
   from tvarv
   into v_prever
where name = 'ZBSK_PREVIOUS_RELEASED_VERSION' and
        type = 'P' and
        numb = '0000'.
concatenate v_prever(4) '0' v_prever+4(2) into v_fiscper.
   concatenate '0' v_prever+4(2) v_prever(4) into v_fiscper.
        l_t_range-low = v_fiscper .
          modify l_t_range index l_idx.
Hope the above code helps you..
let me know in case of any concerns.. and further help needed..
bye
Shu Moh..

How to Load External Data to SAP BPC using SAP BO Data Services

Hi,
We want to load data from an external MS SQL Server DB to SAP Business Planning and Consolidation (BPC 7.5 Netweaver version) using SAP BO Data Services 4.0 as ETL. What is the best way to load data to SAP BPC using Data Services?
Thanks

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

Load external data to symbol (text + images)

Hi there!
I would like to make a symbol that contains one image and one textfield. I've got three buttons, and when I click on each button the symbol shows a different content (so an image and a text depending on what button was clicked, but always inside the same symbol).
I've read that it could be done using an external JSON file, though I really don't know how to do that.
Do you have something that could help me achieve this?
Thank you very much!

Mmmh not really,
Actually I would like to load these data into a symbol by clicking on another symbol, but these specific data are extern (like an image from another folder in my project files).
What I would like to achieve actually is an image gallery: when I click on a symbol (that is kind of a thumbnail), it show that other symbol which contain the image and a description. But these image and description changes regarding which thumbnail we clicked on.
Does that make sense? =/

UJD_Test_Package - Load Transaction data fails

Hi All,
We have a working scenario for automating Master data with UJD_TEST_PACKAGE but the same is not working for Load Transaction data from Infoprovider.
Below Variant for Master data is working fine, but not for transaction data. However when we ran this package manually , it ends successfully.
When triggered from UJD_Test.. it shows accept count positive , but nothing is written BPC or data doesnt change. Package status shows Failed
Thanks,
Krishna

Hi All,
We found the issue. We have extra characters in Answer Prompt which is giving this issue.
Not sure if something is changing the prompt after we saved it , but yes this issue is resolved.
Thanks,
Krishna

Fastest method to load external data?

Hi,
Currently we load external xml file and parse it for our
internal use.
However, parsing take time, is it possible to reduce this
step?
Such as serialize / de-serialize?
thanks.

Are you using Xpath API to parse your xml? This will help
some doing just queries but some parsing will still need to be
done.
Another solution is to not load xml but use Flash remoting.
Flash remoting is a binary format and much faster. WIth Flash
remoting you can pass all your items in the native formats defined
in PHP, ASP.Net, or ColdFusion.
Sean

Error while loading external data using Business Content

Hi,
I am new to BW and I'm stuck up with this problem.
I'm trying to load data from external file using business content cube(0PUR_C01)and infosources(2LIS_02_ITM/S012/SCL).
I first installed the above mentioned cube and data sources.
Then I activated the update rules and transfer rules, without any changes.(I don't know what changes might be required!)
Monitor is showing successful load but the cube has 0 enteries.
Even the simulation of update is showing data in the data target.
Can someone please guide me through this ?
Its really urgent....
Thank you all in advance.

Hi Sharmistha,
Welcome to SDN !! Does your monitor shows any records extracted till PSA ? Go to the details tab -> processing and click on each node to check what monitor shows.
Hope it helps.
Thx,
Soumya

How to load external data to SAP BW?

Hi All,
I try to load data from external application to SAP ware house using RFC, as i am new to SAP BW, I would like describe my question as below.
1. I have run RFC server in my local machine and resister in the SAP system successfully.
2. In the source system, i click check, connection OK.
3. Create DataSource in the Data Sources.
4. Create InfoSources, it contain two rows. but when i try to create transformation, it always give the message "Source doese not exists".
I am not sure why this happened, could you please give some advices. Besides, where can i get some tutorial document of this operation on SDN?
Thanks.

Hi,
This is such a vast topic. There are multiple ways to load data into BI. It could be through Flat Files, or through Web Services, from R/3 etc..
For XML Services:
http://help.sap.com/saphelp_nw70/helpdata/EN/fe/65d03b3f34d172e10000000a11402f/frameset.htm
For Flat File loading:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03450525ee517be10000000a1553f6/frameset.htm
General:
http://help.sap.com/saphelp_nw70/helpdata/DE/44/b734ed352056a3e10000000a1553f6/frameset.htm
Transfromations:
http://help.sap.com/saphelp_nw70/helpdata/EN/f8/7913426e48db2ce10000000a1550b0/frameset.htm
Pls search the forum for more details.

Loading external data

This question was posted in response to the following article: http://help.adobe.com/en_US/air/html/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7cfd.html

Last example is full of mistakes, corrected version below:
var variables = new air.URLVariables("name=Franklin");
var request = new air.URLRequest();
request.url = "http://www.[yourdomain].com/greeting.cfm";
request.method = air.URLRequestMethod.POST;
request.data = variables;
var loader = new air.URLLoader();
loader.dataFormat = air.URLLoaderDataFormat.VARIABLES;
loader.addEventListener(air.Event.COMPLETE, completeHandler);
try
    loader.load(request);
catch (error)
    air.trace("Unable to load URL");
function completeHandler(event)
    air.trace(event.target.data.welcomeMessage);

N95-3 (NAM) - loading external data fails

Similar Messages

Maybe you are looking for