N95-3 two short questions

Hi, yesterday received my new unlocked N95-3 (bronze, like it more than black). But I have two short questions:
1. Is there anyway to end a call closing the slider? In my N80ie when I close the slider it ends the call (N80 is intelligent enough to know that if it is a BT headset connected closing the slider not end the call...).
2. In Forum Nokia N95-3 specifications under Extra Features it´s listed PoC (Push To Talk over Cellular), in my N80 the feature is under "connectivity", but in my N95 where is the feature, I cannot find it...
Thanks in advance.

Right Darla, noticed that, but sinces Windows Live client still works don´t need for this one.
By the way, my device arrived yesterday, so I don´t have much time to play with it, but, I could guess that after installed Y-Brownser if I make a search surely will find the PTT executable...
Right now, the much missed feature to me is the chance to end a call closing the slider as in my N80ie (yeah, just today forgot it and ended up with a 20 minutes call...in my pocket, and yeah, with my girlfriend, lucky me I was driving alone and not talking with anybody). And sure perfect world if I could have the N80 screen resolution in N95 screen size...
Last issue, with the N80 when I press the middle of the volume button of my BH-800 headset it mutes the line, anoying thing this don´t seems to work with N95...

Similar Messages

Two short questions on timecode

Hello,
I've got two short ones on timecode.
1) These days, I get quite a lot of HDV tapes. Since most of my other footage is shot on DV, I convert HDV to DV. However, when capturing that footage, I do get lots and lots of timecode breaks (I capture whole tapes), but the TC seems to be fine in the HDV player (Sony HVR-ME10). Does anybody else find that HDV tapes have TC breaks?
2) Totally unrelated, I just read that using Capture Now means that FCP ignores the TC that is on the tape and creates its own on. Is that true? Or is it true only when I choose Device Settings>Non-Controllable Device? I'm just curious, and also it could one day get me in trouble....
If anyone has any thoughts on these two questions, I'd be thankful.
And now the best part of the day: LUNCHBREAK!!!
Cheers,
Colin
PowerMac G5 2.5GHz DP and PowerMac G4 500MHz DP
PowerMac G5 2.5GHz DP and PowerMac G4 500MHz DP

It all depends on the project. I have a client who will mark up a transcription of an interview, numbering sections in the intended order. I zip thru the clip putting in markers, naming them with the appropriate numbers (and marking an out for the marker - a very useful feature). I simply turn the markers into subclips (by dragging them into another bin), do a sort by name and drag to the timeline. Very, very fast.
Oh and a hint. If you're intending to do a numeric sort, always add leading zeros to your clip names (if you have 99 clips, make sure 1 thur 9 are number 01 - 09 - if you have a 100 to 999 clips, make sure you add another leading zero).
FCP has many, many possible workflows. In my old avid days, I used to obsess about figuring out the fastest way to do things. Now, I concentrate more on doing the creative stuff. But everyonceinawhile, I do have a aha! moment.

Two short questions on Interactive reports

Hello,
I have two questions on passing filter to an Interative report
1) the text that I send to the filter can contain commas. Is it possible to work around this? (comma is interpreted as splitting the filter values)
e.g. f?p=104:19:::NO:19,RIR:IR_BUS1_NAME,IR_IS_OPEN:*Corporate, Other and Eliminations*,Yes
%2C%20other%20and%20eliminations,No,Yes
--> in this case it get messed up when passing to the IR page.
2) anyone know if it is possible to send a IN parameter to an interactive report?
Brgds
Christian

1 \value\ should do the trick
2 Yes, I think so (only done it with ordinary reports and too lazy to check right now!).
Build your string of value1,value2.. in an item then use the &ITEM. syntax in the SQL
HTH,
Chris

Zen micro two short questions

Hi all,
two questoins.: Can you use the zen micro with the mtp firmware an a pc without the media player 0?( like a usb-device)
What does mtp stand for?
Thank you

No, you'll need to use Windows Media Player, it doesn't show up as a dri've in that sense.
MTP stands for Media Transfer Protocol, you can read more on it here.
Cat

Satellite P500 PSPG8E - Bios peeps 3 time - one long two short

Hello,
I have a question: when I power on my Satelite P500 PSPG8E I get 3 Peeps: One long two short!
What is this, maybe Memory?
Thanks allot
Greetings from Germany
Michael Burkhardt

Hi Michael,
I dont know what this beep code means exactly but as you wrote, it could be a RAM issue.
Do you have two modules installed? If yes you should try to start your notebook with one module only and test each module in each slot to determine if its RAM, RAM socket or something else.
But if your notebook is under warranty the repair would be for free if you contact an ASP in your country. ;)

Short question about the nano controls

Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!

The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens.

Just to share GREAT Experience with Lenovo Service with T61p one long two short beeps

Two weeks ago my laptop just suddenly died for no reason. It was in sleep mode and never woke up. I have researched some forums and found that the best thing to do is try to call the number of Lenovo service. I cannot remember it right now, but please check another thread t61p and one long two short beeps. The laptop was out of warranty and according to lenovo site it was 31. July was the last day for replacement claims, however nobody asked a question regarding warranty or replacement. Lenovo sent the box promptly and whole turnaround was in 3 days.
I was really surprised with efficiency and service.
So, if you are in the same situation please give it a try.
Good Luck!

I have used support service a few times and they have always been professional and helpful the support center in Ga. I called last night for my wireless card its on the way to me now I've never had any problems
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

I got an 15 dollar iTunes card for Christmas. I took a picture of the card code to redem the card I accomplished that but when I try to download an app that cost money it asks me two security questions that I forgot the awnsers to.what do I do?

I got an 15 dollar iTunes card for Christmas. I took a picture of the card code to redem the card I accomplished that but when I try to download an app that cost money it asks me two security questions that I forgot the awnsers to. Than I click the forgot security questions than it sends it to my email but that's the problem I do not get any email.

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96048)

I can't remember my two security questions on my account. I made too many attempts and got kicked out for 8 hours. I do have a back up email addy that's verified on my account as well. Any resolutions?

Looking for some help please! I just got an iPad 4 and tried to purchase some apps on it and was prompted to answer my Two Security Questions that are on my apple account, and I can't remember them. I do have another verified email account attached to my account besides my @me.com one.
I created an apple account a couple years ago when I purchased my iPhone and now I can't remember what my answers were. If anyone has any suggestions or resolutions, it would be greatly appreciated as I cannot purchase anything on my new iPad and cannot make another attempt for 8 hours to my failed attempts :( Thank you

Tomorrow call AppleCare and ask to be transferred to the account security team.

Hello ! When i will Buy a Movie in iTunes, they ask me two Security Questions and i have forget the 2 correct answers. Can you help me please ??

Hello ! When i will Buy a Movie in iTunes, they ask me two Security Questions and i have forget the 2 correct answers. Can you help me please ??

Blue, and Mr. Frisky...

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two part question 1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5 delete ichat?

Two part question
1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo? if you open messages beta does it immediately tell you that messages beta expired?
2) does installing messages beta on os x lion 10.7.5 delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Two theoretical questions

Hi there!
I'm designing an authentication system. Two theoretical questions have evolved. I am not so sure about it. Hope you can help me out =)
1. First sign or first cipher?
What is best practice here? Is it a risk to a symmetrical cryptosystem, if there's also a hash of the plaintext available? Or should the cipher text be signed? I am afraid that this might cause a security risk for the hash: The ciphertext's entropy should be lower than the plaintext's, which might cause lower entropy of the hash value that makes it more likely to find possible collusions.
2. Challenge Response Authentication
This is an hypotectical one: Is it of matter, if a (one-side) Challenge Response Authentication is done reverse: Bob sends Alice f(RAND), Alice deciphers it and sends RAND back to Bob.
Thanks for your help!

ManuelBreu wrote:
I'm sorry, my questions were not precise: By entropy I meant the ciphertext's nature that 0 and 1 will have (almost) the same likeliness, which is not the case in the plaintext. This depends very much on the nature of the cleartext. If your cleartext is alpha numeric ASCII then it is certain that the most significant bit of any byte will be a zero with some bias in the other bits (I have never looked at it so I don't know to what extent).
But you are right: I am affraid, that the uncertainty of the key might be negatively affected by fact, that there is also a hashvalue of the plaintext available.The extra information in the form of the hash means that there is less uncertainty but I would take the resultant entropy as near to the minimum of(hash entropy, key entropy, cleartext entropy).

Two app questions

Ok all, I have two app questions.
1. Ever since the IOS 5.1 update, some streams on Tune In Radio Pro do not play in stereo and I can't find a way to fix it! I've tried turning mono audio on and off, turning AAC streams on and off, and still nothing. Could it be that my phone is complaining that it doesn't have a sim card? That's my only theory at this point. I thought it had something to do with the stream bitrate and I have been working with the TuneIn support to try and get to the bottom of this, but nothing has worked. I thought it was just the 32 kbps and 48 kbps aac streams affected, but it seems to be all on some streaming providers. Here's some of the stations I've logged mono audio on, in Spokane, KZZU and KZBD, in Saint Lewis, WARH, in DC WRQX, in New York WPLJ, in Portland Maine WHOM, in Philidelphia WBEN, and in Yakima KFFM. These are all 32 or 48 kbps streams. I can't get stereo on KQMV or KLCK in Seattle, haven't tried KLCK actually as I listen to that enough over the air, I am just basing that one on how TuneIn is acting. I can also get KFFM in stereo via Radio Pup, so in that instance, it seems to be just a TuneIn issue. WBEN is also on IHeart Radio and does not come in in stereo on either app. I didn't mention KFAT in Ankorage, AK because they are with one of the providers that doesn't seem to have a stereo aac stream on TuneIn at all. Other stations in this category dealing with two providers here, WCLI in Dayton, OH, WJDQ Meridian MS, KMGL Oklahoma City, KLMY in Long Beach WA, not listed in a market on TuneIn, KRXY in Shelton also not listed under a city, and I feel like I am forgetting a few but that's most of them. If I didn't mention it before, KQMV and KLCK have 64 kbps aac streams as well as 32 kbps aac streams, problem only occurs on 32 kbps streams there. Any solution?
2. Now this next question will go really fast. TuneIn must use some kind of audio capturing software to record, but you can only do that with TuneIn stations. Is there a way to do this with other apps, such as the hd radio that works with the Ibiquity app in the app store?

Well, here's the skinny then. If it's an isolated issue and you cannot provide a way of replicating the problem, the Apple does not consider it an OS X problem. Rather it's a problem with the third-party software. Given what you have reported I'd tend to agree with that viewpoint.
There are some third-party utilities that enable audio capture from applications that don't support it themselves. The best of them is Audio Hijack Pro 2.10.3. I highly recommend it.
If you are interested in Internet radio then you should check out Radium 2.8.3 and/or World Radio 2.0 and/or Radioshift 1.6.7. The last one will record its audio.

Two random questions

hey guys.. i have two random questions..
1) when you recalibrate your battery... after you drain the computer and leave it for 5 hours.. when you RECHARGE IT (before its fully recharged) are you allowed to use it? or are you only allowed to use the macbook AFTER it's recharged... (because in the instructions it only talks about using it for the 2 hours AFTEr it's rechaarged)
2) also... i always wondered if there was a better alternative between amc the ripper and handbrake (since mac the ripper apparently can rip different region coded dvds)... but ir ealised mac the ripper does FULL dvd rips whilst handbrake converts it into like mp4 and stuff... is that true? (as in.. u cant do vice versa on each?)
thanks a buncho everybody! go the mac..

2) I use handbrake if I am planning on watching the
DVD on my ipod etc and Mac the Ripper to copy
(Backup) full DVDs. Obviously I do this in America as
it's illegal for some reason in the UK.
It is illegal in the US too. Seems "fair use" does not apply to DVDs and disabling the copy protection (which you do when you rip your DVD via mac the ripper or handbrake) is against the law.

N95-3 two short questions

Similar Messages

Maybe you are looking for