N95 31.0.017 Messaging Problem, cannot access mess...

After updating to the new firmware, i cannot read or view any messages which are and were previously stored on my memory card.  I've reinstalled the firmware twice & i've hard reset three times but i've not idea what to do next.
I tried tmobile-o2 & generic versions of 31.0.017 and it still fails to read my messages. 
I just can't access the messages, their present in their folders but they do not open.  However pc suite can access the messages and data, via pc suite.
THE PHONE IS AND WAS FINE BEFORE V31 FIRMWARE. 
I'VE TRIED VARIOUS VERSION OF V31 (NETWORK AND NON BRANDED)
I'VE TRIED VARIOUS MEMORY CARDS
I'VE TRIED MOVING THE MESSAGES TO THE PHONE (NO LUCK)
I'VE TRIED BACKUPS AND RESTORES, NOTHING
This is Bull.

hey i have just today concern the nokia care centre and they people said me that the complete white blank screen is the problem of the belt that is needed for the slider,keypad,camera to run properly,and that belt was damaged,and the replaced price they told me of that belt is 1800is it the ok price?)and ya one more thing that i have replaced my broken lcd with the unautho(duplicate lcd)around 4 months ago,now they also told me that the belt changing night affect ur lcd,(10%chances)and as it is duplicate we cant take any responsibility if it got damaged,so want to know from u people that is it ok to go with belt change the price he said is ok or somewhat higher?

Similar Messages

  • When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

    When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

    Any suggestions please?

  • I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

  • Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.

    Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.  I have changed the permissions to everyone and it doesn't work

    Any suggestions please?

  • Upgrading to Lightroom 5.6 get message "Windows cannot access specific device path or file. You may not have the appropriate permissions to access the item" I'm running Windows 7. How do I make it work?

    Upgrading to Lightroom 5.6 get message "Windows cannot access specific device path or file. You may not have the appropriate permissions to access the item" I'm running Windows 7. How do I make it work?

    right click the installation file and click 'run as administrator'.

  • Using iPhoto 11 under Mavericks and want to buy to buy a Book, I receive error message saying 'Cannot access Apple Store, try later', but I have not problem accessing store via iTunes or directly. Any advice?

    Getting error message when trying to buy my book 'Cannot access Apple Store, please try later' Anyone experienced this?

    Here's a fix that worked for some users:
    Make sure this checkbox is checked in the System/Sharing preference pane:
    If it is, uncheck it and then recheck and try ordering again.
    OT

  • Error Message - "Aperture cannot access this library"

    I'm using OS 10.5.7 and Aperture 2.1.3. I recently had an error message pop-up when I try to start Aperture that says, "Aperture cannot access this library. To use this library, make sure its file permissions are set correctly." Unfortunately, I can't seem to open up my library. Any ideas how to fix this or what is wrong? Thanks

    Hello,
    attached I would like to report how the problem solved.
    1. I had 63 Minute Call to Apple Support and we are tring some things. Finally I Spend spend 1 day for testing.
    2. Testing procedure:
    A) I exported each project step by step
    B) Than I deleted all appr. 50 projects in Aperture Library.
    C) After that I Imported each project to Aperture back.
    Result: 2 Project was corrupted, one of it was going well after export/import procedure how ever but the second ones error was constant appearing if I try to import it. The project consisting of 512 jpg files in total appr. 500MB.
    The solution for this project:
    I moved this jpg´s to waste bin und imported it from waste bin to Aperture again into a new project. Than I tested it again(Export/import) and it was fine.
    For final check I delete my Aperture backup und start a new one.
    Than start a compleate restoring from that last backup.
    Every thing was fine, all project include albums or books are ok.
    The pictures in the corrupted project was not imported by Aperture, they was created on a PC system(XP). Maybe that was the reason for the problem.
    A friend sad, that windows use not the agreed standard for jpg´s.
    I don´t know. So I´m happy all my books are back that is imported for a wedding photographer.
    Have fun
    bernhard66

  • Uninstalled, tried to reinstall firefox- get message Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to

    Firefox would not load Yahoo home page properly, checked add ons and plugins-no problem. So unistalled. When reinstalling, went through until the end, then I get:
    Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access this item.
    I went through the Help section on this page, even to right clicking the file and "run as administrator". It went through and restarted the computer. When I went to look for the program, it wasn't listed in All programs. I searched files and the only thing there was the same message as above.

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • *WARNING* messages IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman"

    Hi all,
    Anyone encountered the following error messages in the dev_icm tracefile?
    WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" with protocol "HTTPS" on AppServer - please check node in TA sicf
    Some info:
    The service /sap/public/icman is not active.
    No J2EE engine is installed.
    Any suggestions?
    Best regards,
    -Chung.

    Yes, i have something like it too:
    IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" on AppServer - please check node in TA sicf [icxxman_mt.c 1872]
    Same kind of config, it is a R/3 4.7 ext.200  system without any J2EE stuff on it (as far as i know).
    Also it runs on SuSE Linux Enterprise Server 8.2 and MaxDB/SAPDB.
    Am looking for a clue as well
    Anyone?

  • After restarting my PC, I get the message, "Windows cannot access the specific device ,path..."

    when i restart my pc i cant open the dreamweaver and error message show"endows cannot access the specific device ,path or, file. you may not have appropriate  permission to access item"

    Hi Ali,
    Can you see the instructions in this article by Microsoft and let us know if they helped?
    http://support.microsoft.com/kb/2669244
    Thanks,
    Preran

  • TS3276 Received Microsoft Entourage 2008 error message: Entourage cannot access your data. To try to fix problem, rebuild database.

    Went through the verify database integrity process which seemed Ok once the process was complete. still could not open entourage same error message. tried to compact database... an error occured with that. Now entourage will not open at all.  Suggestions?

    Do not find three folders labeled Main Identity - only one Main Identity
    That shouldn't be possible. You say you rebuilt the database twice. Which would have to mean you launched Entourage while holding the Option key. When you do that, you should get this utility:
    This is for Outlook 2011, but the 2008 Entourage interface looks pretty much the same. Did you perhaps highlight the backed up databases in this utility and then click the minus button to remove them?
    That would be one of the only ways they wouldn't exist. The other would be going to the folder in your user account where they reside and manually putting them in the trash.

  • After auto update recently, norton internet security won't work. error message:windows cannot access specified path...you may not have appropriate permissions to access item

    Firefox did an auto update and since then I cannot open/run Norton Internet Security. It won't even let me update it or re-install it. I get an error message stating Windows cannot find the specified path. You may not have appropriate permissions to access this.

    Hi
    Some required information are needed for us to help you.
    Hi NabeelOmer,
    We wonder if you have taken any action such as system restore after this issue occurred.
    You might also try this command to restore your access control list.
    Run this command to navigate to the drive letter, example is D
    D:
    To reset all permissions, run this command
    icacls * /reset /t /c /q
    Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
    Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
    Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
    How to: Repair Visual Studio
    https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
    Regards
    D. Wu

  • I have been using thelatest ver firefox. Noe I can not access it. I receive the following message" Windows cannot access the specified device, path or file. You may not have appropriate permission to access. I am using windows XP ,

    unable to access firefox. I receive the following message" Windows can not access the specified device, path or file. You may not have appropriate permission to access. I restored the system to an earlier date when I could access Firefox. I removed an re-installed firefox no changes.

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Firefox updated to 6.0.1 and now I cannot open it, or even reload it, without the message "Windows cannot access the specified device, path or file, You may not have the approprate permission to access the item."

    This is a new problem... I've never had issues with Firefox before. I use firefox for everything at work and it is beyond inconvienent to not be able to access my websites, etc.

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
    Don't remove personal data when uninstalling.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • When attempting to download a program I get the error message, "Windows cannot access the specified device, path or file".

    The message goes on to say, "You may not have the appropriate permission to access the item".
    There are no other users, accounts on this computer. What are they talking about, I am the Administrator, operator, only user!

    I've tried all of these things. And again just to confirm. When removing Firefox from the Firewall despite the setting on it only allowing sites that are listed, still goes through, what's that about?

Maybe you are looking for