N95 8gb - Appointment view in standby mode

Hello
Please can someone help me. I use the calander option heavily on my n95 8gb phone. I have read somewhere that in standby mode it is supposed to display the next 3 appointments over the next 48 hours. Mine only shows one. Where do I set this up and how can I configure it? On a similar subject (I'm sure it is in the same place) how can I disply my to-do's rather than just the number of them that I have to do! It's quite depressing to see the number of things I need to do rather than a prompt to do them!
I hope someone can help. I look forward to hearing from you all.
Regards

dont say thanx dude ,i did not solve ya problem
As for prompt response,i did it because,because,because
Forgot what i was going to say,forget things &appointments
But hey dont lose hope someone will give ya better answer then me ok dude chill
bad can always be made good...it needs that determination!!!

Similar Messages

  • N95 8GB cannot view gallery photos/ uploads photos...

    Hiya,
    I have had the same problem with my N95 8GB with viewing photos in my gallery!
    I have now got my 5th replacement handset (Orange) since August 29th due to various faults and issues. The main one being trying to transfer photos from my PC to my mobile via the Nokia PC Suite or just via USB cable. Both of which when I try to then go into the gallery view on the phone caused it to freeze. Unable to view any images!
    This keeps happening, and I have even tried running the 'N series installation disk' and still the same issues. I thought that such a good spec phone with 8GB memory would be able to hand just 2 jpeg images without freezing!
    Has anyone else had the same problem or am I just unlucky? I have got up to date anti virus software on my PC, and have tried different images each time. My previous phone (n95) was able to upload and export pics and music to my PC no problems ever!

    yes it is very odd!
    Well I have tried to just loads 2 images from the laptop onto my mobile. I have tried doing a direct file transfer (mass media) and then also tried through Nokia PC suite-uploaded via the CD rom I was given.On both occasions this has been uncessful to view images from the gallery menu on the phone..crashes!
    I think the photos are actually on the phone under the file manager folder I can find them stored here. However on opening the gallery to try and view these files, the phone freezes and I am unable to exit the menu -using the 'back' button have to press the red phone cancel button. Once out of the gallery folder and back to the main screen I can then no longer access and shortcut menus for about 3mins. Very frustrating. The most recent phone I have now, I got 2 days ago-I've not even plugged into my laptop, and when asking a friend to send me images via bluetooth I cannot open this either!! (it comes as a text format from bluetooth) and on opening the phone just freezes again. I try to save this when asked to mass memory and not phone memory.
    I can take images on my 'phone camera' but again cannot view as unable to access the gallery-constantly freezes the phone.The images are not a large file just jpeg format for example 45KB another one I tried was much larger 1MB...
    I still don't understand why this is happening all the time!!! Many thanks for your help.... (Orange are going to send me a new sim card to try) and see if this helps.

  • N95 8GB contacts view

    On previous Nokias I have been able to change the way a contact is displayed (ie. just as a name or name & number).
    I can't seem to find a way of changing this on my N95 8GB.
    Anyone help please??
    Cheers.

    hey, i just looking for the same thing as also on my previews nokia i was able to copy and paste text from contacs names ,links,msgs,anything i would want.Or when you trying to sent a msg there was an option for recent receiptien contacs and you dident need to look again for the contacts names ,but on N95 8GB nothing from all this is available ,ok is a very good device and very usefull but some futures i think it would be neccesary to be preinstall it on such good device. if anyones knows any additional applications or any updates to have again this extras on N95 8GB it would be very helpfull.thanks

  • N95 8GB reboots periodically in data transfer mode

    I have a new N95 8GB running firmware v20. Unfortunately, when I use the genuine USB cable and select "Data Transfer Mode" the phone reboots 60 seconds after I connect the cable (and thereafter each 60 seconds when I don't touch the phone).
    I have tried with a non-genuine cable and the behaviour is the same.
    Coincidentally the "Power Save Time-out" is set to 60 seconds. When I change this to another value, say 40 seconds, then the above rebooting happens every 40 seconds.
    This appears to be a phone bug and makes it extremely difficult to use data transfer mode, unless you can transfer files within the power save time-out period, or unless you are prepared to press a button on the phone within this period.
    **Nokia please fix this**
    See related post: /discussions/board/message?board.id=smartphones&thread.id=81967&view=by_date_ascending&page=1

    Well,rotateme works perfectly for me and i have a n95 8gb too.So there are two things that might happening.
    1.You are doing something wrong with the whole installation(does rotateme works when you install it?)
    2.You downloaded your self a corrapted or somekind of a virus or a bug .sis file and installed it to your phone.
    Why dont you try to download one other rotateme file for you?You can find plenty rotateme from a lot of users.I can send you mine,if you want send me an e-mail and i`ll send to you the .sis file that i used and as i said,it works fine for me.
    Peace
    Message Edited by noslien on 06-Feb-2008 07:47 AM
    Eykleidis

  • N95-8GB - Not able to connect in Data Transfer Mod...

    Hi all,
    Recently I bought N95-8GB and installed PC Suite which comes along with the phone in my OS Windows Vista Home Premium. When I try to connect my phone in Data Transfer mode, I am getting message "Found new hardware - Windows needs to install driver software for your unknown device" and I am not able to find any driver for the same.
    Please help me out to solve this problem.
    Regards,
    S.Suresh

    just let the wizard run through and select the options that windows will search for the friver itself. the dirvers are included in nokia Pc suite package.
    YOu can also try to use the standard NOkia PC Suite from www.nokia.com/pcsuite or generally look for a fresh version of NSeries PC Suite from thephone web-pages, the CD-ROM versions are normally outdated

  • Disable camera standby mode in nokia n95

    Hello
    I cannot record a video over 1 hour with my n95, or so it would seem. So I would like to use my phone as a "video source" for my TV-card, so I could just plug my phone into my TV-card and use that card to do the actual recording. But every time I do this, my phone informs me about standby mode being initialized after one minute of "projecting the video to my TV-card". How can I disable this message?

    Thanks haZey for your response.
    Well, the time-out has a max limit of 20 seconds and I've already set that to the max limit, but the issue still exists.
    I understand that the only  way is to press a button now to see the screensaver (time), but this is not what I want I had a very basic earlier model and it didn't have that issue.
    I am sure there should be a way, even hidden or via some changes in the firmware that can allow me to disable the automatic power-save. I can't believe this is a hopeless case, this is a very basic request.
    Pleaseeeeeeeeeee help me, I might stop using that phone with all its other nice features just because of this issue.
    Thanks for your time and support in advance.

  • N95 8gb clock standby display

    Anyone know is it possible to light the time up during the night by pressing one of the buttons on the N95 8gb. Tried most but it just lights up the main screen. I know on the Sony Ericsson models you can press volume to light up the time. Thanks in advance
    Solved!
    Go to Solution.

    cClock screensaver will do what you want.
    http://home.pacific.net.sg/~welic/cClock.html
    Set "Always on top" to "Yes". Then pressing any key on the phone will light up the main screen, showing the cClock large clock.
    Press the red hangup button to show the normal phone display.

  • N95 8GB headphone jack mode auto-select

    When I plug headphones into my N95 8GB a popup always appears to ask me whether I want to use Headphones, TV-Out cable or a Music Stand.  Is there a way of having this default to Headphones without plugging in the remote-control?  I don't use the TV-Out cable or own a Music Stand and this annoying little piece of UI really gets in the way of using the phone as a decent portable music player. 

    I think they were trying to avoid using the 'remote control': if you have regular earphones, you end up with metres of extra cable which can be a pain.
    My way around this was to get some Shure SE210s which come in 2 parts so you can detach most of the cable and replace it with the AD-54.

  • N95 8GB Rotate

    All,
    I just updated my N95 8GB to version 20.0.016 and now have the 'Rotate' feature as standard.
    But I can't get it to work. I have set 'Rotate' to automatic in display settings but the screen will not move.
    I suspect that the firmware has shipped without the accelerometer plugin. Can someone confirm that I will need this?
    If I do need this then the questions is - why has the firmware shipped without it?

    it only can rotate to 2 directions. one to the left and one to the right after u to the left.that's means u can only view it in portraits mode and in a left landscape mode. u can view it in the right landscape mode when playing game and watching video by changing the settings at the game or in the video player that u installed. sorry for my bad English.

  • N95 8gb Calender

    I have recently updated the phone software to version 15.0.015, and since this update the calender information is no longer shown on the active standby. Previously items were shown there upto 5 days in advance or a comment that there were no calender entries for that day. Is this an issue with the software update as I am unable to find anywhere in the phone options to include this again! Any help would be appreciated.

    I have N95-1, on it you go tools/settings/general/personalisation/standby mode/active standby on......this puts other things on screen like WLAN scanning, mail, web etc etc...not sure if thats what you mean or if you mean you want to control calender by itself.
    I would like to control calender and all others by themselves also if anyone knows how??
    Maybe its the same for 8gb, I don't know.

  • N95 8gb theme delete

    Hi, i want to delete themes for my N95 8gb and for that i need to access the private folder buti do not know how to find it as for that i need to connect to mass storage mode. Can someone tell me how can i find the private folder in mass storage mode in 8gb?

    Borrowed from another site i used this method and it works.
    Here is how to delete themes that does'nt appear in the App Manager
    You need to hook up your N95 to your PC via the USB and access the data transfer mode,and you need to make sure your file explorer can view hidden folders.
    You'll find the theme files in a folder named 'Private',in this folder are lots of other folders.Go to the folder named '10207114' and then enter the folder inside called 'Import'
    In here are all the themes on your phone.
    You have to open every folder and then look in the skn folder to find the name of the theme as the folders are named by numbers and not the theme itself,if the PC doesn't allow you to open the file then choose to open it with Notepad,then scroll across until you see the name of the theme and usually it'll say the creators name too.
    Once you know it's the theme you want to delete then you have to delete the whole folder including including the mbm,mif,ini and skn folders.

  • How to delete themes on N95 8gb

    Hi just installed a few themes on my N95 8gb phone. i want to delete a couple of them but there is no way to delete it. i mean the theme menu has no key or nething saying delete. When i click Help .. it says that you should scroll to the theme and press C button. even doing that it dosent delete ne of the themes. On my N82 it deletes easily.
    Ne1 got some idea's fer this. Help
    Thanks
    Asif
    Solved!
    Go to Solution.

    Sometimes themes don't show in the app manager so use tyhis method
    You need to hook up your N95 to your PC via the USB lead and access the data transfer/mass storage mode, and you need to make sure your file explorer can view hidden folders.
    You'll find the theme files in a folder named 'Private', in this folder are lots of other folders. Go to the folder named '10207114' and then enter the folder inside called 'Import'
    In here are all the themes on your sd card/mass memory.
    You have to open every folder and then look in the skn folder to find the name of the theme as the folders are named by numbers and not the theme itself, if the PC doesn't allow you to open the file then choose to open it with Notepad, then scroll across until you see the name of the theme and usually it'll say the creators name too.
    Once you know it's the theme you want to delete then you have to delete the whole folder including the mbm,mif,ini and skn folders.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • N95 8GB how to load t9 ?

    Hi,i have already buy N95 8gb from US. i live in turkey. How can i download "turkish t9" to my phone?
    and also i download some themes and cant delete them. Any one to help?

    Here is how to delete themes that aren't in the app manager
    *******This only works for themes on memory/sd cards********
    You need to hook up your N73/N93/N95 or what ever you have to your PC via the USB and access the data transfer/mass storage mode,and you need to make sure your file explorer can view hidden folders.
    You'll find the theme filesin a folder named 'Private',in this folder are lots of other folders.Go to the folder named '10207114' and then eneter the folder inside called 'Import'
    In here are all the themes on your sd card.
    You have to open every folder and then look in the skn folder to find the name of the theme as the folders are named by numbers and not the theme itself,if the PC doesn't allow you to open the file then choose to open it with Notepad,then scroll across until you see the name of the theme and usually it'll say the creators name too.
    Once you know it's the theme you want to delete then you have to delete the whole folder including including the mbm,mif,ini and skn folders.
    Job done
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • N95 8GB connect to a USB Device

    As the title says, is it possible to connect the N95 8GB to a external USB Device like a USB Hard Drive so that files from the hard drive can be viewed on the N95.
    I would suppose you would need to use additional software for this task.
    Any comments.

    Power (+5V) is not the problem as long as the usb device has an external power supply. Most (if not all) nokia phones use 3.6 - 3.7 V battery, but, despite that, nokia phones could produce 5V from 3.7V battery with special hardware. Else, there could be a limitation of simultaneously using the phone charger (that provides 5V to the phone) when connecting a usb device to nokia phone. So, power is not the problem.
    Lets look to signals (D+ and D-). According to http://en.wikipedia.org/wiki/Usb , Transmitted signal levels are 0.0 – 0.3 V for low and 2.8 – 3.6 V for high in full speed (FS) and low speed (LS) modes, and −10 – 10 mV for low and 360 – 440 mV for high in hi-speed (HS) mode. So 3.7V battery is capable of USB signaling, too.
    Additionally, most (if not all) ARM processors that are inside Nokia phones, have one USB client port and at least one USB Host port (USB 1.1 or USB 2.0). For examble, old Nokia 7610 is equiped with ARM processor OMAP 1510, that has one client USB port and one USB 1.1 HOST port. (Mention that 7610 does not have usb port. It has pop-port that includes required 4 USB signals: VBUS, Ground, D+ and D-). See http://en.wikipedia.org/wiki/Pop-port .
    What is the problem: It's just, Nokia manufacturer does not make use of ARM processor's USB Host port contacts. Also there is not an addtional micro USB port (more space required), and of course there is not software supporting USB Host capability.
    Consider, also, that adding USB Host capability to small sized Nokia super phones, that have not big enough battery capacity, then, the battery would be exhausted soon. That's not good for marketing.
    So, if you want to add USB Host port to Nokia phone, then:
    1) Locate processor and USB Host port contacts ( if you are able to do it, because of FBGA processor type)
    2) Provide 5V to USB device.
    3) Write some code and install it in Nokia phone.
    ---  It doesn't worth it. Too much trouble !!!  ----
    One other method, would be a SDIO to USB Host Controller Card, connected to micro SD port of some Nokia phones. But, only CF Card to USB Host exists in the market for over 130$. SDIO to USB Host Hardware Development kit costs a lot and are big enough.
    Can anyone build something using Maxim ICs MAX3420 or MAX3421E (USB Peripheral Controller with SPI Interface), and connect it to SD card slot supporting SDIO (SD uses SPI interface!!!) ????????????

  • After update N95 8gb i got big problems.

    I make a backup of all but not the 8gb-memory, and restured all after upate, and everyting seems to work fine.
    First problem; i see now i have no 3g 3 (no connection) competely dead, i can not use the phone to communicate.
    Strange everything work fine after update yesterday and this morning, something happen when it was in the locker at work.
    And now i can't use Maploader, it say i have no memorycard, i understand that problem, i delete the whole Cities-folder this morning, because i dont need Nokia GPS-program Wayfinder anymoore, i choose Nav4all instead, i try the maploader only to for testing, i don't want to download any maps.
    I test maploader now only bacause my phone is completely dead in communication, try to find out why.
    I check in Nokia Nseries PC Suit everything on PC & mobil are the latest update.
    I have another mobile SE M600i with 3g 3-cashcard, i by that cashcard only to enable the phone to start, not for communication, that mobile have full 3g (and probably work fine).
    Was it the thing that i delete the Cities-map, no it can't be, because i use the N95 8gb and it work fine after that.
    after work i even have a missed call on that mobile, but i can't call back, it's dead in communication now.
    Strange things happens now.
    Kjell O

    15-Apr-2008 11:48 PM
    kjello wrote:
    Where can i change networksettings, all settings i find is; 3, tre, tre(01), tremms, tremms(01)
    Is your phone in another language? You should normally see 2 or 3 options.
    1. Dual Mode
    2. UMTS
    3. GSM
    Maybe you could try reseting the phone if nothing else works.
    Always remember to backup your phone before performing resets as your data may be lost.
    Try these
    *#7780# - Restore factory settings - resets all the settings to the default
    *#7370# - Reformat your phone

Maybe you are looking for

  • Unable to find information on WS data binding error on WLS 9.2.03 startup

    Frustratingly, when I Google for "WS data binding error" I get 'old' links to BEA forum issues which may help but these are nowhere to be seen on the read-only copies now on Oracle forums here :- http://forums.oracle.com/forums/category.jspa?category

  • Payment Run Not Printing Check. No Spool Created.

    Hi Gurus, We did a payment run and it generated a spool at 1st and it was at "waiting status" which is strange because when we do this, it prints immediately. So, then the spool disappeared and no checks was printed. We tried to reprint it and no spo

  • Is there a way of recording component video output to a MacBook Pro

    I have a Sony DXC990P video camera head i.e. it has no recorder. It has several output of which component video is regarded as the highest quality. Is there a way recording this output with a MacBook Pro? T5G5

  • Aironet 1300 antenna diversity query

    good day! does anyone had already configured an antenna diversity for aironet 1300 with 2.4Ghz frequency? we want to have a ring type network, we have a site A that needs to have a stable link and this site A has an line of sight to two active sites,

  • Extracting Embedded Images

    I'm hoping there is a very simple solution here, but I haven't found it yet. I am doing some freelance work and the client sent me several .ai files. They were a mess, and should have been created in InDesign to begin with, so I transferred them over