N95 8GB Auto Connect Apps (e.g. Gmail)

Hi,
Can anyone tell me how I can get all my apps to auto connect to the internet?
I have some apps like google maps, Gmail and want them to auto connect and stop asking me if its ok for them to connect and then choose a connection (e.g. Wifi or GPRS/3G).
Is this possible?
Thanks,
DOS.

This could could cost you a lot of money if you are not on an unlimited data package.
Anyway, the procedure is different for each application. Somewhere in the settings menu for each application you will usually find a setting for Access Points. You want to change this from "Always Ask" to "Auto" or the name of your packet data connection.

Similar Messages

  • N95 8gb BT Connection Problem With BMW 5 series

    Hello everyone,
    I hope someone could help me with this. I just got my N95 8 gb & I have tried to connect my phone to my BMW58610 BT but it seems like it constanly drop ny itself & then coneecting again & drop & connect. I do not know how to get this problem fix. 20.2.005 30-04-08 RM-421.
    And then sometimes one folder will be missing by itself for example the n-gage folder will disappear & then it will come back within seconds or maps folder will disappear & will appears back.
    I would really appreciate any suggestions or help! 

    I had a situation whereby my N95 8gb will connect to my iDrive and sometimes after a while, when I make a call, I can hear the person I am calling but they can't hear me. This is what I have learnt from trial and error since. 
    I tried everything to resolve this so I am not sure which actually fixed it so I'll tell you all I did. I updated firmware on both phone (V20) and car. Deleted all pairings on both phone and car. Repaired. I must have deleted pairings and repaired at least half a dozen times before the problem mysteriously disappeared.
    Another thing I have noticed is, it is better to leave the phone for a few minutes after it has connected, to allow it to download all the contacts before using it. I have had the bluetooth disconnect or the HUD malfunction when I use the phone straight away. 
    I had to do the same with my N96 before it would work satisfactorily. My N80, however had no such problems. Strange. 

  • N95 8gb Auto Rotate Screen

    Hello,
    I just downloaded the newest firmware for the n95 8gb.
    I had the heard that the newest firmware allows for auto rotate screen from portrait to landscape and vice versa.
    Is this true and if so how do I enable this feature?
    Thank you....

    29-Jul-2008 12:02 AM
    cjlim wrote:
    v20.0.016 is the latest version for the N95-2. I think you guys may have the N95-4 which is the US only version of the N95 8gb
    Yes, sure !!
    Check I've said having an RM-421 phone. That's the N95-4 or N95 NAM. The N95-2 is RM-320.
    Should I assume that americans (not only north-americans) don't need to rotate their screens ??? :-)
    Nokia - "Connecting people" making them to support themselves after wasting USD800+ on a inflatable dinghy "Flagship" :-(
    PS: DON'T EDIT MY SIGNATURE PLEASE !!!

  • N95 8GB - cannot connect to PC

    Hi - read about this problem from a few people - I have just got a brand new N95 8GB from O2. Installed the cd software but it would just not find the phone using the USB.
    Ive tried different USB cables and ports to no avail.
    Ive uninstalled the software from the CD and installed the latest software suite. no joy.
    Ive set the phone to Phone Suite as opposed to mass data. No joy.
    Ive connected my Blackberry to the same usb cable and port and it connects fine.
    What is the issue here?? Anyone help?!

    try going to your control panel > add/remove programs
    look for an application named PC connectivity solution and select Change > Repair
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • Nokia N95 8GB auto shutdown problem

    Hi everyone!
    Yesterday my Nokia N95 8GB (v31) suddenly having weird problem. It will shut down itself, without giving any notice. The shut down case happen when it run about 30 minutes. I suspect is battery problem, but during it was charging, the phone also auto shut down itself. 
    The weird part is after it auto shut down, it can't be boot up again, unless I manually take out the battery and wait for some time and put it back, then it only can boot again.
    Anyone here know what is the problem? It is battery or the phone? I need a solution...  
    I've re-formatted the memory card and hard reset the phone, also no luck...
    Thx

    Hi everyone! my Nokia N95 8GB (v3.1) suddenly having weird problem. It will shut down itself, without giving any notice. The shut down case happen when it run about 10 minutes. I suspect is battery problem, but during it was charging, the phone also auto shut down itself. The weird part is after it auto shut down, it can't be boot up again, unless I manually take out the battery and wait for some time and put it back, then it only can boot again. Anyone here know what is the problem? It is battery or the phone? I need a solution... I've re-formatted the memory card and hard reset the phone, also no luck....Tauhid

  • N95 8gb auto install

    when i restart my n95 8gb it tries to install something but says it is harmfull software and should be installed from progammanager but there are no programs that are not installed.
    How can i stop this ?

    Or connect the phone with the memory card inserted to a computer into "Mass storage" mode. Then use Windows Explorer to open it and delete the "private" and "system" folders. NOTE: You will loose all installed applications on the card...
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • Nokia N95 8GB 3G "Connection Error"

    Hi all, when i use my 4 month old phone i was only experincing a small number of drop outs, now all i get is a connection error or network busy error everytime i try to make a call & incomming calls go straight to message bank. I did a factory rest on the phone settings & things seemed to work for a little while, but then stopped again. so i switched the phone to only use GSM & supprise supprise it works all the time now!! put it back onto umts & it wont connect, or into dual mode it may work sometimes!!
    what can i do to get this problem fixed? it is the phone as i put the sim in another phone it appears to work fine (but that was a GSM phone that i used to) im with optus & rely heavily on my phone for business!! i just want it to work so i can be contactable 24hrs
    Cheers
    Greg

    Had the same issue. My bet is you are trying to use a Telstra Next-G card in a non-Telsrtra Next-G phone.
    The software is not compatible. You will need a Next-G phone.
    I had to purchase two new phones N95 and 6120. Problem soleved.
    The real issue is that sales staff do not really understand the difference between 3G and NextG.

  • How to connect my n95 8gb to my mercedes c-class 2...

    how to connect my n95 8gb to my mercedes c-class 2002 car bluetooth kit
    when i search for the car kit on my phone to pair it i cant find the car
    is the phone compatible with the car ?
    i got the kit installed but i dont know how to make it work please can you let me know

    Hi ryansdistrict,
    Did you activate your car kit bluetooth to start searching for the phone at the same time your phone was also searching for the car kit?
    N95-2, RM-320, V31.0.015, Vista
    Ovi Maps 3.0, PCSuite 7.1.30.9

  • N95-8GB - Not able to connect in Data Transfer Mod...

    Hi all,
    Recently I bought N95-8GB and installed PC Suite which comes along with the phone in my OS Windows Vista Home Premium. When I try to connect my phone in Data Transfer mode, I am getting message "Found new hardware - Windows needs to install driver software for your unknown device" and I am not able to find any driver for the same.
    Please help me out to solve this problem.
    Regards,
    S.Suresh

    just let the wizard run through and select the options that windows will search for the friver itself. the dirvers are included in nokia Pc suite package.
    YOu can also try to use the standard NOkia PC Suite from www.nokia.com/pcsuite or generally look for a fresh version of NSeries PC Suite from thephone web-pages, the CD-ROM versions are normally outdated

  • Connecting to the internet via PC Suite / N95 8GB ...

    I'm struggling to connect to the internet via PC Suite (v7.1.30.9), using Vista Ultimate SP2, repeatedly getting the error "Failed to connect to the network! One touch access could not connect to the selected device". I've tried different cables, checked for PC Suite updates, updated the phone's software, etc, but all to no avail. (I am able to connect immediately using my N80, so the problem seems to be on the N95 8GB). The rest of the PC Suite connection seems fine. Can anyone help me? 

    I found a situation where your error message appears. It is the case when the nokia is connected using the data transfer mode and simultaneously the OneTouch Application is started. Then the device is not recognized by the modem software. The PC Suite mode is required for the OneTouch Application.
    In my situation I think I already saw all of the possible error messages described in the documentation during the various experiments.
    For example I tried to uninstall and reinstall the cable drivers. Unfortunately the driver page of N95 8GB does not include them only the page of N95. This was a step towards success - what concerns the OneTouch Application.
    Sometimes it is useful to switch off and on the phone, specially when it is not possible to connect with the modem driver.
    In my opinion the possibility of completly uninstalling the Nokia Suite is missing. You can uninstall all parts but after reinstallation the Nokia Phone Browser is no more available, the icon is not displayed. All the software packages are working fine even the modem drivers but not the Phone Browser.
    Franz

  • Internet Connection thru USB /N95 8GB

    I have just got the N95 8GB and loaded the software etc. It will not connect to the internet, error msg says no modem detected.
    I had a similar problem with the previous N95 in the months leading up to my upgrade. After using it to connect to the net many times it failed to work and said no modem detected.

    When you've connected your usb cable & phone, go to device manager of XP/Vista & check if there is Nokia modem installed or its yellow or red. From there you'll know if the nokia moden driver is properly installed. When you click it will tell working properly. You might have MS OS problem, try it in other PC/Laptop.
    Message Edited by android on 09-Aug-2008 01:32 PM
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • VPN auto connect leads problem when accessing the private url in my app through HttpClient

    Hi,
    I have app to execute my WCF service through HttpClient(). I configured my SSL VPN in sonicwall mobile connect with auto connect option. So when accessing my internal WCF service, Wp 8.1 asks the VPN connection screen. If I follow the screen, VPN
    has connected and return to my App. But here I received "An error has ocurred. While sending request to server" in Wp 8.1 screen. Even if I debug through visual studio I couldn't catch or track the actual error in code. Below the code I am using
    for your reference. Kindly help me in this regard.
    try
    HttpClientHandler handler = new HttpClientHandler(); ;
    handler.AllowAutoRedirect = false;
    HttpClient httpClient = new HttpClient(handler);
    httpClient.MaxResponseContentBufferSize = 256000;
    HttpResponseMessage response = await httpClient.GetAsync("http://172.0.0.11/xxxxx/Service1.svc/xxxxCheck/" + usr.username + "/" + App.DeviceId + "/" + usr.password);
    response.EnsureSuccessStatusCode();
    string content = await response.Content.ReadAsStringAsync();
    List<EmcUserResult> userres = JsonConvert.DeserializeObject<List<EmcUserResult>>(content);
    if (userres.FirstOrDefault().Allowed == "TRUE")
    NavigationService.Navigate(new Uri("/MainPage.xaml", UriKind.Relative)); // call MainPage
    else
    MessageBox.Show("This User was blocked. Contact admin.");
    catch (Exception ex)
    MessageBox.Show(ex.Message);

    I recommend that you check the network traffic by using either Wireshark or Fiddler to see what's going on with the request.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Nokia n95 8gb won't connect to pc - start installa...

    my Nokia N95 8gb won't connect to pc in any mode.
    As soon as I connect it with a cable, it start some installation, fails
    and then says that there is a harmful software on the memory space.
    Really annoying!
    Can't do anything, can't install games or transfer music or anything...
    Tried the nokia pc suite cleaner, hard reset and soft reset and everything...
    Please help!!!
    Sincerely,
    Igor

    i suggest you take your phone to nokia care
    phones i have 2730c - C1
    KUDOS ME IF YOU FIND MY ANSWERS HELP FULL

  • N95 8GB won't connect to EAP-TLS secured WLAN

    Hi all,
    Has anyone succeeded in connecting to EAP-TLS secured wifi network? I have an N95 8GB with the latest firmware (updated yesterday) that cannot connect to my office wlan.
    I’ve been reading this forum (and others google found) and here’s what I’ve done:
    * defined an access point with 802.1x security mode and EAP-TLS
    * exported the certificate from my IE, imported it into the phone and selected it in the Personal Certificate filed
    * selected the accompanying rootCA certificate as Authority Certificate (tried leaving it blank as well)
    * tried different Ciphers just in case
    Every connection attempt results in "EAP-TLS authentication failed" and I’m never asked for password.
    I’ve been talking to our admin (I’m afraid he’ll start to hate me before too long ) and found out that after the firmware upgrade and a couple of hours of trying this-or-that I’ve managed to have proper username sent to the server. But the message remains.
    Here’s a part of the event log forwarded to me by the admin (fully qualified username is stripped by him but it seems to be correct):
    Event Type: Warning
    Event Source: IAS
    Event Category: None
    Event ID: 2
    Client-Friendly-Name = wifi2
    NAS-Port-Type = Wireless - IEEE 802.11
    NAS-Port = 46
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server =
    Policy-Name = wifi
    Authentication-Type = EAP
    EAP-Type =
    Reason-Code = 22
    Reason = The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server
    As far as I can see my nokia cannot use a proper EAP-Type. Does anyone have a clue on what to do?
    George
    P.S. I believe we are using Radius server and a google search for the stated Reason gives a number of Radius-related results, but they describe cases when PC's cannot connect. I can connect to the wlan with my laptop with no prob (but it asks for credentials each time - don't know if it matters).

    Hi
    Even I am facing the same problem.
    However Opera 8.65 is working fine with the said configuration
    -Ramesh V

  • N95 8GB WIRELESS AND WAP CONNECTION PROBLEM...

    HI ALL.
    I HAVE JUST BOUGHT AN N95 8GB FROM INDIA, I AM LOCATED AT TURKEY. TILL I UPDATE THE VERSION OF MY PHONE TO V15.0.015, I WAS ABLE TO CONNECT TO INTERNET VIA WIRELESS. AFTER SOFTWARE UPDATE, WHENEVER I TRY TO CONNECT TO MY WIRELESS AT HOME,IT IS ABLE TO FIND THE WIRELESS AND THEN ASKING FOR THE PASSWORD, AFTER IT IS SAYING THAT ACCES POINT DEFINED,THEN IT IS TRYING TO CONNECT, THEN 1 MORE TIME IT IS ASKING FOR THE PASSWORD AND AFTER ENTERING THE PASSWORD, IT IS GIVING THE BELOW MESSAGE:
    "WLAN:WLAN CONNECTION ALREADY ACTIVE.CLOSE IT AND TRY AGAIN."
    I HAVE TRIED WITH OTHER WIRELESS ACCES POINTS BUT STILL HAVING THE SAME PROBLEM. I RESET MY PHONE TO FACTORY SETTINGS BUT NOTHING HAS CHANGED.
    I THINK IT IS HAVING A SIMPLE SOLUTION WHICH I CANNOT SORT OUT. I AM WAITING FOR YOUR VALUABLE HELPS.
    REGARDS AND THANKS...
    CANAN

    I cannot send or recieve a fax.  When I troubleshoot, the printer says, No Connection...there is no connection to a computer.  But I can make copies, so this doesn't make any sense.  Please help

Maybe you are looking for