N95 8Gb Configuration Code

anybody know what the N95 8Gb configuration code is? its not n the manual unless it goes by another name?

if ur on about the secruity code its 12345 as is with all nokia's if its for gprs/mms the get it sent from ur provider
other codes cud b ur PUK code, or a unblocking code to release it onto all networks (if uve put in a different network sim)Message Edited by d3ville on 31-Oct-200708:11 PM

Similar Messages

N95 8GB - Default Code 12345 Not working

I want to reset my phone to original factory settings and my phone does not accepts default code 12345, how can this issue be resolved.

post007, that is the case for some models but not all. On some FP1 based phones the hard reset actually reset the security code, I believe the N95 8GB was one of the models that this could be done on.
So it is worth taking grschinon's advice and giving it a try.
If it fails to solve it the only option is to contact a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Nokia N95 8GB unlock code?

hi i have this nokia n95 8GB i bought from ebay and its got some lock code on it and i dont know what it is, neither does the seller how do i reset the whole phone without needing to have put the lock code in?

Updating the firmware on an N95-2 will reset the security code to 12345.
However, your original query wasn't that clear. Is it the phone's security code you're asking for or the unlock code that allows you to use SIM cards from networks other than the original one the phone was used on (so-called restriction code)? Only the original network can provide the restriction code.
Also make sure that it is in fact a genuine N95-2 that you have. There are countless fakes on sale on eBay.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N95 8GB Configuring my Gmail

Can anyone help? I wasted hours today talking to Vodafone, they sent me instructions to manually configure which didn't work, finally one of those guys pointed me to the Nokia website where I got a link sent to the phone with configuration.
This hasn't quite worked, I've received some older emails but the newer ones don't come through and I cannot send emails.
I never had any problems with my old E65.
Any help will be greatly appreciated.
David
Solved!
Go to Solution.

To configure IMAP for your Symbian S60 device, just follow these steps:
1. Enable IMAP in your Gmail settings.
2. Select 'Messaging' > 'Options' > 'Settings' > 'E-mail' > 'Mailboxes.'
3. If you have never set up email on your phone before, select 'Yes' to define a new mailbox. If you already have other mailboxes, select 'Options' and then 'New mailbox.'
4. Select 'Start' to begin the setup wizard.
5. Select 'IMAP4' and then 'Next.'
6. Enter your full email address (including '@gmail.com') as the email address and select 'Next.' Google Apps users, enter your full address in the format 'username@your_domain.com.'
7. Enter 'imap.gmail.com' as the incoming mail server and select 'Next.'
8. Enter 'smtp.gmail.com' as the outgoing mail server and select 'Next.'
9. Select the appropriate access point and then 'Next.'
10. Enter a descriptive name for the email account mailbox name.
11. Once your mailbox is set up, select it from the email mailbox settings screen.
12. Select 'Connection settings' > 'Incoming e-mail.'
13. Enter your address (including '@gmail.com' or '@your_domain.com') and password.
14. Select 'SSL/TLS' for your security (ports) and define your port as '993.'
15. Select 'Back.'
16. Select 'Outgoing e-mail.'
17. Enter your email address (including '@gmail.com' or '@your_domain.com') and password.
18. Select 'StartTLS' for your security (ports) and define your port as '587.'
19. Select 'Back' and change any other settings according to your preferences.
20. Check our recommended client settings, and adjust your client's settings as needed.

Help...forgot the lock code for N95 8GB?

I was trying to use my device after a gap of an year.
However, swithcing on the phone, it asks for lock code. I have never changed it before. I tried factory default code 12345. Tried couple of others like 1234, 0000 etc. None seem to work.
I also tried switching on the phone after pressing Call, * and '3' and still it is asking for lock code.
I tried connecting to Nokia PC suite and it doesn't recognise the phone at all, so can't update the software and see if it resets the lock code.
Can anybody give me any further suggestion please?
Thanks

/t5/forums/searchpage/tab/message?filter=location&location=Board%3Asmartphones&q=N95+hard+reset+code
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

N95 8GB won't connect to EAP-TLS secured WLAN

Hi all,
Has anyone succeeded in connecting to EAP-TLS secured wifi network? I have an N95 8GB with the latest firmware (updated yesterday) that cannot connect to my office wlan.
I’ve been reading this forum (and others google found) and here’s what I’ve done:
* defined an access point with 802.1x security mode and EAP-TLS
* exported the certificate from my IE, imported it into the phone and selected it in the Personal Certificate filed
* selected the accompanying rootCA certificate as Authority Certificate (tried leaving it blank as well)
* tried different Ciphers just in case
Every connection attempt results in "EAP-TLS authentication failed" and I’m never asked for password.
I’ve been talking to our admin (I’m afraid he’ll start to hate me before too long ) and found out that after the firmware upgrade and a couple of hours of trying this-or-that I’ve managed to have proper username sent to the server. But the message remains.
Here’s a part of the event log forwarded to me by the admin (fully qualified username is stripped by him but it seems to be correct):
Event Type: Warning
Event Source: IAS
Event Category: None
Event ID: 2
Client-Friendly-Name = wifi2
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 46
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = wifi
Authentication-Type = EAP
EAP-Type =
Reason-Code = 22
Reason = The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server
As far as I can see my nokia cannot use a proper EAP-Type. Does anyone have a clue on what to do?
George
P.S. I believe we are using Radius server and a google search for the stated Reason gives a number of Radius-related results, but they describe cases when PC's cannot connect. I can connect to the wlan with my laptop with no prob (but it asks for credentials each time - don't know if it matters).

Hi
Even I am facing the same problem.
However Opera 8.65 is working fine with the said configuration
-Ramesh V

Setting up email on Nokia n95 8gb

Can anyone help with my problem. I have an ntl email account which I have set up on my nokia n95 8gb. I am on the vodafone network. I can send email no problem but I cannot receive them on my mobile. I have asked vodafone for help but got no where. They suggested I go to nokia website and use advance settings to configure my phone for ntl email to be set up which I have done. But because i still could't receive emails they then told me to take it to a vodafone store for them to look at which I did, they altered the settings but the problem not able to receive emails is still there. I keep getting asked for my user name and password over and over after I click ok. I have checked they are correct numerous times. Vodafone says its a problem that lies with the nokia handset and ntl !! If the ntl server isn't compatible with the handset how come I can send emails but not receive and how come nokia website gave me a code to configure my phone to set up ntl email using vodafone network. Any advice would be appreciated.
Solved!
Go to Solution.

Dear Eve,
With great interest I read your post about your email issue with your Nokia N95. Could you help me out by checking the following link to see if this has to do with your problem...? I would like to thank you for any effort beforehand.
/discussions/board/message?board.id=smartphones&message.id=97611#M97611
Best regards,
Fernao

Nokia N95 8gb latest firmware update 21/02/13

Hi, I have had a problem whilst updating my N95 8gb and now it appears, I think, that the firmware version I have is an older one than I had previously, but there isn't anything newer showing as availaable. I have 35,0.001. I am sure that the last time I had a problem, after it was "flashed", the firmware I had installed by the shop was this and then when I got home and went to restore my files, there was a new update available on line. The rreason I say this is that the icons and colours etc are like the version installed by the shop, about 1 year ago and when I updated the software everything was different. If what I am saying is correct, does anyone know if this newer firmware update has now been withdrawn or can anyone throw any light on the subject as I am a little confused! Thanks

If your N95 8GB is RM-320 the last available firmware for all product codes is v35.0.001. Using restore via Nokia Suite can only reset your individual personalisation settings.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N95 8GB Firmware release 20.0.016

New firmware release 20.0.016 for N95 8GB is out and installed. The fixes are, an inhansment in the browser and there is a new feature add which is a screen rotate. Congratulation guys.

27-Apr-2008 12:24 PM
foneguru wrote:
That would depend on your product code, but most of the product codes now has an available update for v20.
My product code is 0557651.
Any idea? Thx.

N95 8GB Video Manager "NOT CONVERTING"

My NSeries Video Manager for N95 8GB does not seem to be able to convert any video file. What's exactly happening is that after I've searched a folder and found the video files, whatever video type I choose (whether it's an .avi, or.mpg or.mov file) and select "convert and trasfer to phone" I get a message saying some of the video or audio codecs needed for converting are missing and that I should check the log file for more info. The funny thing is I can watch all those videos I've found with VideoManager, I just cannot convert them with it. What's my problem? Am I missing any codecs, and if yes where can I find them for downloading?

You can be missing codecs, but what I experienced with Video Manager is that it is very buggy. If you know how to use ffmpeg, you simply do not need Video Manager and can convert videos to H.264 formats fast.
I use the following parameters with ffmpeg:
ffmpeg -y -i "$input" -s 320x240 -async 1 -vcodec libx264 -b 200k -maxrate 384k -bufsize 384 -coder 0 -level 13 -acodec libfaac -ab 128k -threads 2 "$output"
Replace $input and $output with the input and output file paths respectively. Please be reminded that the ffmpeg version should support x264, otherwise it will not convert. After successful conversion, the file can be played by built-in RealPlayer.
Message Edited by superbanana on 21-Jan-2008 06:16 AM

N95 8GB v20.0.016 - mass memory failure #3

For the third time my N95 8GB has managed to corrupt its mass memory ("mass memory corrupted") - only this time, I am unable to reformat it at all!
The problem behaviour is as follows:
Used the phone last night to take several pictures, accessing the Gallery at one stage to find and delete one picture. This afternoon I look for the photos to review, and the '200902' folder (images for February) on the mass memory has no subfolder and is empty. However, I DO have a video saved on the phone from the 7th of February!
This afternoon I am able to take as many pictures as I like and they are saved correctly in the gallery and the 200902 folder. I had used about 5.2GB of the mass memory at this point. (It may be worth noting that I would occasionally get the message 'Gallery: Memory full' whilst browsing the gallery, but never at any other time).
At this stage, the mass memory is still fully populated, so I thought it would be best to cut my losses and take a full phone backup. The backup process fails, with an error along the lines of having lost connection with the phone.
I check file manager to see what's going on, and the following message appears on the memory card page: "(no data)".
All previous times the handset corrupted its memory, the trigger seemed to be a reboot of the handset. (Contents were lost upon returning to File Manager after a reboot). Having not rebooted the phone at all in the last 24 hours, I was surprised that the memory card contents had apparently disappeared without any application being launched and apparently no new data writing attempts being made. Perhaps the read operation for the backup caused the failure? But this still does not explain how all my February photos were deleted.
Without any obvious way of getting to my files, I rebooted the phone, returned to file manager and was greeted by the familiar: "(mass memory corrupted)".
As mentioned previously, when this happened before I was able to format the memory via Menu -> Tools -> Utilities -> Memory -> Format. This time, I receive the message: "Mass memory is in use by other application. Continue anyway?". I select 'Yes' - but the handset simply returns to the memory screen and "(mass memory corrupted)". This still happens even after a reboot.
I have performed 'Factory settings' reset via the phone menus, a 'hard reset' via code *#7370#, a format by holding *, 3 and the call answer button whilst powering on the phone - none of these prevent the 'Mass memory is in use' error from occurring. I have also attempted to format drive E (mass memory) but this just returns an error code. When I attempt to upgrade the firmware, the process fails every time after ~3 minutes saying that the connection with the phone has been lost (the warnings about upgrading do state that the mass memory should NOT be encrypted, so I presume that it being inaccessible is equivalent to this).
I cannot see any way to format the 8gb memory so that I can make it usable once more! The phone was not dropped or damaged in any way in the last 24 hours, yet it seems that something must have physically changed inside it?
The only parallel I can draw between this incident and the previous one is that both times, the memory was around 2/3rds full (around 5.5GB). I am wondering if perhaps the FAT table outgrows itself and dies?
My 1 year warranty expired 3 weeks ago - I am hopeful my network operator will be able to provide a replacement and that this phone just has a 'bad' memory chip - it really is a superb phone barring this infuriating corruption problem mine seems to have!
If anyone could shed any light on a solution it would be much appreciated
Thanks,
Alex
Message Edited by dazz19 on 15-Feb-2009 11:43 AM

In the end my operator agreed to replace the handset for me after a lot of to-ing and fro-ing. In my opinion the problem was caused by a faulty memory chip.
Alex
p.s. - the old handset was sent to the operator for repair and they were unable to repair it, only offer a refurbished replacement. With the greatest of respect, it's good to know my case is not unique!
Message Edited by psx9 on 12-May-2009 01:10 AM

PLEASE HELP ME SOMEONE! - my N95 8GB only disconne...

My Phone is a Nokia N95 8GB with firmware v.31.0.015 and I'm trying to update to v.35.0.001, which is the latest firmware for my product code.
I have updated the firmware of this phone using Nokia Software Updater at least 2 times before successfully on the same computer as I'm using now. This time the phone only disconnects during the update and the program asks me to disconnect charger/battery/usb cable, and to reconnect them again and click "Retry". But it it's always the same all the time - it disconnects. I have tried re-installing all Nokia programs, I've tried running NSU by itself, from Nokia PC Suite and I've tried the updater from Ovi Suite (but it tells me that v.31.0.015 is the latest firmware!?).
The good thing is that the phone is still working properly but it has the old firmware, v.31.0.015.
Please, does anyone have any clue what the problem can be?
I am hoping for the updated NSU 2.4, but it has not been released yet, despite announced by a Nokia Employee on this discussion furumsome weeks ago.
Solved!
Go to Solution.

There is nothing wrong with phone itself , so "Reset" will not help. You can have a few problems, already (like corrupted communications drivers between Nokia and PC). My advise is to do this in few steps. First to clean old Nokia PC Suit.
1. download: "Nokia_PC_Suit_Cleaner_7_1_1.exe" and rid off old installation.
2. download: "Nokia_PC_Suit_7_1_40_1_eng_web.exe" and install like any other Nokia PC Suit including connection manager and so on but do not go to "Nokia Software Updater", yet. It will not work.
3. download: "NokiaSoftwareUpdaterSetup.exe" but do not install, yet. (so do not hit "run" after downloading)
4. Find just downloaded above file of Software Updater and with cursor on this file click right button. In Windows7 there is "Troubleshoot Compatibility" option. Just hit it and windows will sort it out. On the next window hit "Try Recommended Setting".
On the follow up window there will be an information about applied compatibility mode and "Run The Program" button. Just hit it and install this "Software Updater". This also will replace original installation of software updater which is included with new Nokia PC Suit.
For me this is the cleanest way do solve this problem. It showed me compatibility with "WindowsXP Service Pack 2".
I do not know what operating system you are using. I am using Windows7 64 bits without any problems.
Probably you can try go stright to property of this downloaded file and do this changes in compatibility option by yourself.
By the way it is hardly to see any sagnificant improvement by comparing both versions. I hope it will help. Bye.
Janusz

Updated N95-8gb Now None of my soft keys or center...

also when i put in my product code it says i can update to 31.01.11 or something but it says i am up to date at 20.??.?? any help would be appreciated

Hi Mate!
Did you made Backup N95-8GB before install firmware update?

N95 8gb - Appointment view in standby mode

Hello
Please can someone help me. I use the calander option heavily on my n95 8gb phone. I have read somewhere that in standby mode it is supposed to display the next 3 appointments over the next 48 hours. Mine only shows one. Where do I set this up and how can I configure it? On a similar subject (I'm sure it is in the same place) how can I disply my to-do's rather than just the number of them that I have to do! It's quite depressing to see the number of things I need to do rather than a prompt to do them!
I hope someone can help. I look forward to hearing from you all.
Regards

dont say thanx dude ,i did not solve ya problem
As for prompt response,i did it because,because,because
Forgot what i was going to say,forget things &appointments
But hey dont lose hope someone will give ya better answer then me ok dude chill
bad can always be made good...it needs that determination!!!

N95 8GB problems, HELP PLEASE!

MY n95 8gb turns off by it self sometimes or ends calls within good range of an antena or most of all says the following message when trying to make a call: Connection error (no ring tones or nothing, i tried calling the provider company, switched the sim into another phone, and its not the providers error, because the sim card works fine with a different phone.
I have my n95 for 1 month and i never had such a problem.
another question: HOW DO YOU PERFORM MASS MEMORY FORMAT SO, after doing that my phone will be 100% functional but clean! ???

To format the mass memory goto Tools=>Utilities=>Memory=>Options=>Format Mass Memory
Also you can use these codes
*#7780# Factory Reset
or
*#7370# Format phone

N95 8Gb Configuration Code

Similar Messages

Maybe you are looking for