N95 8GB - drive not shown in explorer

I recently replaced my troublesome N95 with an 8GB version. (nicer screen, less crashing, faster nav :-) )
when I installed the latest version of pc suite v1.6.80.0 it no longer shows the n95 drive in windows explorer. I used to be able to copy files to/from the old version.
Am I missing something?
thanks

I don't know about the Nseries PC Suite, but the "regular" PC Suite is v6.85.something and you can get it from: http://www.nokia.com/pcsuite
I use it with my N95 8GB (never tried the Nseries PC Suite versions).

Similar Messages

E:\ Drive (CDROM) not shown in explorer - also won't see media in cd rom

I have a Satellite C655D-S5200.   I have had difficulty getting my cdrom drive to:
1) show up in explorer (it doesn't)
2) read media that is inserted into CD
I know a few things:
I had this problem since one of the latest Updates from Microsoft (which one I don't know).   I have tried all the solutions thorugh Mr. FixIt on Microsoft. I have tried dozens of possible solutions in the Toshiba Community Forums as well as other online tech support forums.
One forum posting I read I noticed the user booted into safe mode and was able to see his e:\ (cdrom drive) under computer in explorer.   He had determined that it had to be a recent update to one of the drivers on his system that was preventing the CDrom driver from working properly.
I tried the same. Booted into Safe Mode and viola! I saw my E:\ drive (CDROM). It also was able read media in the CD.
This helped me rule out the issue was the physical hardware.   But I am still baffled as to what is interferring with the cdrom.sys driver for the TSSTcorp cd rom drive when I load windows 7 normally.
Has any of the tech experts at Toshiba had this problem? If so, maybe its time to update the cdrom.sys driver after finding out what other driver is conflicting with cdrom.sys and preventing the cdrom drive from being seen or able to read or even write media.
Just as an fyi, I just recently purchased recovery cd for my particular serial numbered laptop.   I inserted the first recovery disk into the CDROM drive and followed the instructions. the CDROM was able to see the CDrom drive, read from the CDrom drive and reinstall the factory image to my laptop.
once I completed the recovery, applied all the Microsoft updates, I rebooted and once again the cdrom drive (E:\) from my explorer disappeared and I can't even get Mr. FIxIT to see media in the drive.
Any ideas from either other users or the Toshiba Tech experts?   I am desperate. I have to be able to access my CDrom drive and read and write to it.   but I can't go into safe mode everytime I want to do that (plus not all apps run in safe mode anyway).
PLEASE HELP.... THIS IS the 4th (fourth) week I've been messing around with this issue. I need a solution!!!!!!
Jeff
Bro Jeff Wolfe, OSFC/n

Jerry_Lippey wrote:
Satellite C655D-S5200
Can't hurt to try this Microsoft Fix it.
   Fix problems with CD or DVD drives that can’t read or write media
sure, if you want to do it the easy way
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

N95-8GB driver-installation repeating

I connected my new N95-8 to my Windows-XP-Computer and since then all 10 sec appears the status-notice 'new hardware found: Nokia N95 8GB' alternating with the notice 'new hardware found: Nokia Windows Portable Device Driver' even if I disconnect the phone - how can I stop this?
Solved!
Go to Solution.

Indeed, deinstalling all Nokia-drivers & -software and reinstalling the Nseries-software properly by putting in first the CD and connecting with the phone just after installing the software was the only solution practicable.
Together with our installation-specialist we decoverd, that it was a contamination caused by the older Nokia driver (63xx)(or by the bad compatibility between both). First it filled me up the harddisc until I couldn't work no longer and then deinstalling the software we had some damages in the printer driver and the soundcard-driver (a professional was working, not me!). Finaly, after 2h1/2 it works.

Cover image is not shown in explorer

Hi guys, I've already got a new lap which runs W7 ultimate (x64) and Adobe Reader X 10.1.3 but the cover image (the first page) of PDF fiels is not shown in Window's Explorer. Any hints?.
Thanks in advance,

try to flush the image.
   image.flush():
   g.drawImage(image, 0, 0, null);
or try
   Toolkit.getDefaultToolkit().prepareImage(image, -1, -1, null);
    g.drawImage(image, 0, 0, null);
If the image isn't displayed, just try a new paint after a while (for example after 1 second).
Another way is to implement the ImageObserver interface who can announce you with the imageUpdate() method when the entire image is loaded:
   public boolean imageUpdate(Image img,int info,int x,int y,int width,int height)
     if(info & ALLBITS)
       //the image is entirely loaded....
   }

750 GB Seagate Drives not shown on Xserve

Hi there,
i installed new Seagate ST3750640A Version 3.AAE Drives on a Xserve RAID to increase Capacity. It's an Xserve RAID from 2003.
I created a Array with 2 Discs as a RAID 0 to test the whole thing.
The Drives are shown in RAID-Admin and ich have the latest firmware installed which comess with the 1.5.1 Raid Admin.
I'M using a Fibre-Channel Card.
Serve is a Xserve G4 running 10.4.9 Server.
o here is my Problem after i created the Array i can't do anything with the Array on the Server. It's not shown in Disc-Utility. I rebooted the Server changed the Fibre-Channel Cable. Tried it on a other Server. Nothing.
In System-Profiler i can see that under Fibre-Channel that there is the Xsere RAID attached. But i can't see the Array to format it in HFS or else.
I tried it on both sides of the RAID.
MY old Hitachi Deskstar 180 Drives which come direct from Apple are working.
Anyone else having this sympton.
Thanks in advance.
Clemens

Ebay is an excellent place to find empty ADMs
We recently bought three, added them to a 4x250 array, took out the 250's (and have them as spares for our other 5 raids with 250's), and put in 7 750 seagates. Worked beautifully. Our 250's are starting to drop like flies now that it's been 3+ yrs.
Expect to pay 150-200 each for empties.

N95 8GB buttons not functioning

I've had my Nokia N95 8GB for 2 yeras now, when all of a sudden some of the top media buttons have stopped working, preventing me from accessing messages and contacts which is a complete pain. I have tried taking the phone apart to clean the board and performed a hard reset, but to no avail. Has anyone ever had this problem and have any solutions? Also, would I have lost all my contacts from reseting?
Any help would be appreciated as it's becoming increasingly frustrating not being able to read my new messages!

The likely cause of problem is the connecting foil cable between phone's main body and the sliding/screen section. It can easily be replaced with new unit which costs about $20. Make sure you purchase a quality unit. I purchased 2 (very cheap) units from China and 1 unit in USA and all did not function properly. Ended up buying it from reputable source, double the cost and it did work. This is your best option, just replace the part.
Other option is to use a Bluetooth keyboard. I used a mini bluetooth keyboard with my N95 and it controls all keys and shortcut funtions, etc. Not sure if you'll be able to configure keyboard at this stage (without use of some buttons).

Nokia N95 8gb: Gallery not showing all pictures

Recently I became owner of a nokia n95 8gb.
So as a good child made a backup from my old N95-1 by using Ovi Suite
and restored it to the new Nokia n95 8gb
Now when I press the gallery button it shows me only 542 photos from the 1000 I almost have.
Any idea of what's going on here?
P.S Firmware version is 35.0.001

NOT WORKING???!!!!
THAT'S VERY BROAD CAN YOU SPECIFY WHAT EXACTLY IS "NOT WORKING??"
AND CAN YOU STOP SHOUTING?
640K Should be enough for everybody
El_Loco Nokia Video Blog

External USB Drive Not Shown in Finder... HELP!!!

After upgraded to the latest OS X Lion, external USB drives plugged to my macbook pro (named A) won't show anything. I've tried cmd+opt+r+p twice but no luck; however, i am able to see it in Disk Ultilities and Storage in About This Mac...
Another same macbook pro of mine (named B) did the upgrade and it is working just fine - external drive is shown as normal whenever plugged.
Help please because my daily work depends largely on document on external usb drive!!!???

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

Flash drive not shown in File Explorer

I have plugged in my flash drive into three different usb drive ports (one at a time) and no luck on opening documents on it. Its icon shows on the bottom bar of the desktop, however it is unable to access.
I have restarted my computer to see if it will open in the file explorer folder, but it did not.
I do not know why my Toshiba laptop is unable to read my flash drive when I regularly use it on here for school. Are there any helpful hints to resolve this issue? I would appreciate the help.

Strange! ?:|
What happens if you try to disconnect the external USB HDD and connect it again????
Do you see the little icon in the task bar that the USB device was connected???
One hint:
- Leave the USB HDD connected to the notebook
- Shut down the notebook
- Restart the notebook
- Login into Vista
- Check if the USB HDD was recognized again!
Good luck

Windows 8.1 Desktop wallpaper not shown if Explorer is not running

Hi,
I set wallpaper image using registry:
[HKEY_CURRENT_USER\Control Panel\Desktop]
"Wallpaper"="C:\\Windows\\Web\\Wallpaper\\Windows\\img0.jpg"
Problem is that I need to show wallpaper WITHOUT explorer running.
W7 and W8: If explorer is running, wallpaper is shown correctly.
W8: If I end task "Windows Explorer" via task manager, wallpaper disappear and only blank (dark blue) screen is shown.
W7: If I end task explorer.exe wallpaper is still shown.
Anyone knows how to show a image without explorer running on Windows 8?
Regards,
Tomas Ryba

Hello Tomas Ryba,
After lots of test and research, I still can’t find a solution to meet this requirement.
I tried to use the process monitor to capture the registry and process activity in Windows 8 and Windows 7, but can’t find the resolution.
I think this setting is by design.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

File Sharing - Drives not shown

I have six Macs on a network with DSL Modem and a separate router. (this is irrelevant)
One of the Macs (G3) is a server. (still irrelevant)
I have always used "personal File sharing" on the G3 to allow my other Macs to access it. I turn on AFP on the G3 and GO>Connect to Server from my G4 MDD.
Up pops the user name and password (everything ok to here)
In that list usually shows something like this:
Macintosh HD G3
Macintosh HD2 G3
johnsmith
davesmith
janesmith
Notice it will share the Hard drives on the G3 AND the User Folders.
Now I just recently get only this:
johnsmith
davesmith
janesmith
No hard drives!
Does anyone know what could be wrong? I can share from other Macs on the network as outlined above and their drives show in the list. Also remember, this G3 server has always allowed me to connect to the drives. Now they are just not there. I have trashed the preference file com.apple.systempreferences.plist etc. No luck. I have rebuilt permissions. No Luck. I have got info on the disks to see if they have their permissions correct. No luck.
Anyone have any ideas.
Thanks.
G4 MDD Dual 1Gig Mac OS X (10.3.9)

Hello JamsDizz,
With OS X Server 10.6, File Sharing settings will be relocated to Server Preferences.
For further information, please see Chapter 9 (Page 125) of the Mac OS X Server Getting Started PDF located here:
Mac OS X Server Getting Started
http://manuals.info.apple.com/en_US/Mac_OSX_Server_v10.6_Getting_Started.pdf
Cheers,
Allen

MPG video files on a flash drive not shown!

I have a flash drive with videos (.mpg) with format FAT32. When I connect this flash drive to my macbook pro (OSX) it displays on the desktop. However, the videos fail to display when I explore the flash drive. What to do?
Folder Architechture:
Flash Drive -> Folder -> Videos

The Apple info on iPhoto is applicable to your situation:
http://support.apple.com/kb/TS5168?viewlocale=en_US&locale=en_US
Basically, move your flash files to your desktop, and convert the original flash drive from FAT32 to MacO S X Extended. Move the converted files to the flash device - and it should work fine.

CD/DVD Drive Not shown in Device Manager or Bios

I have a Satellite A215 series laptop and have found that my CD/DVD drive is missing from my computer and device manager. It will not read discs, but powers up, seems to run, tray opens/closes, amber light flashes, etc. It also powers up and spins during boot, but will not read the recovery disc. It appears to also be missing in the Bios. I have replaced the drive with another and have the same problem. I have also tested my original drive in another laptop and it works. I have tried removing upper and lower filters in the registry with no success. Restore also did nothing. I found this problem after recently adding a new Canon printer and software. The drive worked flawlessly at that time. Can anyone please shed light on this problem? Any help is greatly appreciated!

please provide your full model number. it is printed on the bottom of computer.
you should restore to out-of-box state. you can order the disks from toshiba if you did not create them when your computer was working. This installs the OS as well as the necessary toshiba drivers.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Lion, Cloud, Isync, Nokia N95 8GB but not the ICal. Is there any possibility? Hajo from Munich

Hi,
I can sync the address book with my Nokia N95 but not ICal. Is there any possibility? Hajo from Munich

Remove the old and new plugins, delete the device in iSync, then re-install the new one. Finally setup the phone again from scratch via the Bluetooth Setup Assistant, accessed via the Bluetooth system preferences pane.

Replacement hard drive not shown in Disk Utility

So I just finished installing a replacement hard drive for my PB 12". I got a Seagate 2.5" ATA Momentus 5400 etc as per my previous thread. But after firing it up from the install disk, the new volume fails to show up. Anyone else had this problem? And fixed it? Opening up the case again now...

Don't know if your problem solved. Had the same thing happen to me. Was told that new HD was bad (unlikely), Logic board was bad (disaster). Then finally was tole by another tech (OWC) that it sounded like a bad cable connection. Took it apart again and reseated both ends of HD cable a couple of times. Started up and the HD recognized by disk utility. Works great since. Hope your problem as simple as mine.

N95 8GB - drive not shown in explorer

Similar Messages

Maybe you are looking for