N95 - 8GB , During incoming call it will show the ...

When incoming call it will show the contact name and also the contact number which is harm to the privacy of the contact numbers also...
So please some one tell me how to avoid this problem , otherwise everybody around me will come to know all my contact numbers without go to the phone book during a call......

I dont really see how everybody around you could see the numbers. This was done to show you who was calling and from what phone number you have saved. This is the built in caller ID, and no amount of resetting will fix this to my knowledge.
For the people around you to see, Its pretty gross and unusual for people to look at your phone and try to memorize the small font numbers. You arent giving them enough time. 2 secs flat when you look at the phone, slide it open and put on your ear isnt enough for people to view and memorize 8-12 digit numbers.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

Greetings naseem770,
It sounds as if you are having an intermittent issue with touchscreen response on your iPhone. I would suggest that you troubleshoot using the steps in this article -
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Why are my Text Contacts and incoming calls only are showing as "Message Received"

All of my text contacts messages just say "Message Received", but if I have set a ringtone for them, that is the ringtone that plays. The same is true of incoming calls, It will show the phone number, but not the assigned name. I don't know everyone's phone number! I barely remember mine!
HELP?? Please ?!
How do I get my caller ID to work properly again?
I have a Galaxy S3
Thanks

Hey there, celtmaidn! Thank you for bringing this matter to the community. I'm sorry that your Caller ID isn't providing you with the details you need, but I'm happy to help. If I understand correctly, incoming calls and messages do not display the name of any of your calls or messages, just the number. Does the same occur on your outbound calls and/or messages? Also, you may have a contact (example: Dave) that you have programmed in your S III with a mobile number, but "Dave" may have a home number as well. Have you confirmed that the number used for that call or message is the same one you have programmed into your device?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Blackberry 9300 Freeze During Incoming Call

Device: Blackberry Curve 3G 9300
OS: 6.0 Bundle 2475 (v6.0.0.546)
Application Storage Free Space: 43.3MB
Carrier: Maxis Communications (Malaysia)
My phone has been freezing up randomly during incoming calls for the last 3 weeks. Sometimes I am able to pick up the call but most times it just freezes up. During the freeze, all the buttons will not work and the phone will just keep ringing until the call has been canceled/dropped from the other end.
There are 3 scenarios:
1. Phone works as normal.
2. Incoming call comes in, phone freezes up, I pull the battery out, phone reboots and everything is fine until the next freeze. I can recieve SMS and all application works as normal.
3. Incoming call comes in, phone freezes up, I do nothing and let the call end. Screen will black out after a few seconds and none of the button works. Next incoming call comes in, the screen lights up to show the incoming call but none of the button works just like before. In the end, I have to pull out the battery.
Here are some of the things I have tried:
1. Deleting applications from my phone to free up memory (Facebook, Yahoo Messenger, Google Messenger)
2. Deleting pictures to free up memory
3. Updating the phone to the latest software version. Previously it was on version 5 but the freeze happened then too.
4. Reseting my phone to use the original theme.
I have never dropped my phone (not even once) and I have been using this same phone for the last 10 months. I still have 2 months left before my warranty expires. I really look forward to getting help from the experts here before I take the last option of bringing my phone to the service center.

Basics from the manual are restart, reset, restore from backup, restore as new.

A short memo during incoming call

Some Nokia phones allow to add short memo to the contact.
Is there a possibility in Nokia phones to show this memo during incoming call?
I have a big number of contacts and additional short memo would help to recollect details about caller.
Artur

you can use the notes field of a contact to store extra info, i think you can see this whilst in a call by going to the phonebook - but i dont think this info will pop up when a call comes in

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

HT4515 phone does not ring during incomming call

phone does not ring during incomming call

Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this. Also ensure the volume is up. If you've checked these and still nothing are you able to call people? do you have service?

My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

I'm experiencing what is I believe to be the same issue with my iPhone 4, and have been suffering in silence for about a week.
iPhone 4 model MC603X with Modem Firmware 04.10.01, 16Gb, cheap silicone cover, Vodafone NZ as my carrier.
My screen locks after 1 minute of inactivity as it should with my settings. Perhaps 1 call in 5, or 1 call in 10, the screen wakes up and displays called ID information etc correctly, but I cannot swipe to answer the call. The touch screen simply fails to respond.
If I push the power button briefly to silence the ringtone, this does not make a difference. The iPhone has to be locked (and screen turned off), then push a hardware button to wake up the display, and then I can swipe to unlock the device.
This is only since iOS 4.3 and unfortunately iOS 4.3.1 has not changed this behaviour.
Any advice appreciated.
Cheers, Mike

My incoming calls aren't showing up on my screen and I can't hear any of my alerts, notifications, etc. what's up???

My incoming calls aren't showing up on my screen and I can't hear any of my alerts, notifications, etc. What's up???

This is probably some corruption in the settings file that stores the on-screen position of the Firefox window. Could you try the steps in this thread: [https://support.mozilla.org/en-US/questions/980358 opens off monitor screen]. Any luck?

An incoming call from VoIP. The SPA122 generate Dial Tone after the far end hung up rather busy tone.

Hi All!
I have a problem with the SPA122 telephony adapter, uncorrectly process the subscriber signaling at the end of the call.
1) Outbound call from FXS port SPA122 . When a remote caller hangs up first , the subscriber SPA122 Reorder Tone played with a delay specified in the Reorder Delay. This circuit is working properly.
2 ) Incoming call from VoIP to the SPA122. When a remote caller hangs up first , subscriber on the FXS port of the SPA122 hears silence ~ 3-4 seconds , then SPA122 plays Dial Tone, as if he had just picked up the phone and he 's going to call . No signal lights out (Busy Tone or Reorder Tone) will not play .
Config is attached.
Model: SPA122, LAN, 2 FXS
Hardware Version: 1.0.0 Boot Version: 1.0.1 (Oct 6 2011 - 20:04:00)
Firmware Version: 1.3.2-XU (014) Jul 2 2013
Recovery Firmware: 1.0.2 (001)
WAN MAC Address: 6C:20:56:55:3A:B6
Host Name: SPA122
Domain Name: (none)
Serial Number: CCQ16450LG3
However, other VoIP terminals registered to Huawei, including older versions of the Linksys SPA2102 work in these scenarios correctly.
Where to kick it?

[2] is misconfiguration on your's side. You have CPC turned on, but no CPC capable device. Set CPC Duration to zero to turn off CPC.
By the way, wrong forum for your question. You should consider to move it to space.

Why the iphone4 during a call does not keep the 3G?

why the iphone4 during a call does not keep the 3G?
I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Oniplay wrote:
I tried to restart, the problem still remains.
Make sure you do a reset, not a restart. Press and hold both buttons, ignore the "slide to turn off" message and let go of the buttons after the Apple logo shows up on the screen.
If you did that and it did not bring any change, try to set it up as new device, as explained in this article:
How to back up your data and set up as a new device
If it does not work the first time, try not to use the backup afterwards in a second attempt, in case it contains corrupt data.
If still no luck, get it serviced:
Apple - Support - Service Answer Center

API call that will list the meetings of employees that are assigned to a manager

Hi,
What is the API call that will list the meetings of employees that are assigned to a manager? The manager will be logged in and when I use the API call:
http://[serverid]/api/xml?&action=report-my-meetings&principal-id=[##]
I always get the same results which is a list of the meetings for the manager. If put the id of the employee, I still get the managers meetings.
I have looked through all of the API documentation and cannot find which call I could make to get the results that I want. The documentation specifically says that report-my-meetings provides information about meetings that the logged in user is scheduled to attend. So how do I get the information for the managers employees?
What is needed is the Name, Duration, and Start Time of all meetings that the employee is enrolled in who is assigned to the manager that is logged in.
Thanks for any help with this!

I posted this in the wrong forum and have moved it to the XML forum.

How do I convert a power point document to a pdf where it will show the notes for each slide?

How do I convert a power point document to a pdf where it will show the notes for each slide?

To get the 'handout view' with a slide and the speaker notes on the same page, you have to save the PDF file directly from PowerPoint (the later versions of Microsoft Office can make PDF files without the help of Acrobat).

Play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

Hi amorg1876,
If your iPhone is skipping over certain songs, you may want to check out this article:
Troubleshooting songs that skip
http://support.apple.com/kb/TS3217
Cheers!
- Ari

Incoming Excise document automaticaly show the base document Series ans Do

Dear All,
One of my customer have two branches and for that they created them as two separate warehouses. And both branches are excisable unit. So when they are transferring inventory from one branch to other which are excisable so they have to raise Excise invoice based on Inventory Transfer.
They require in an incoming Excise document automatically show the base document Series and Docnumber in a "Excise Ref No." field .
pl provide me FMS query .
regards
Rakesh

Bom dia Marc de Ruijter,
Não dá para ler sua thread, mas imagino que seu validador esteja desligado.
No GRC vá em SPRO --> SAP GRC Nota Fiscal Electronica --> Configure System Response for Each Tax Number (CNPJ)
Para ligar/desligar o Validador basta clicar no check box na coluna Validation.
Observação: Para correto funcionamento do GRC deve-se sempre utilizar o validador ligado.
Após isto refaça seu teste, é provável que você receba um erro de validação para a NF-e. Veja em GRC Web monitor -> NFe Detailed View -> Validation History.
Atenciosamente,
Fernando Da Ró

N95 - 8GB , During incoming call it will show the ...

Similar Messages

Maybe you are looking for