N95 8GB Isnt reading/detecting any memory card.

My N95 isnt reading or noticing that a memory card is inserted, I tryed formating it it wouldnt let me, a message comes up saying "Drive not found". Even when i create a fold inside it a massage comes sayinf "Param error".
Clicking Open says empty.
I tryed to formating on the PC, but nothing changes, its still says the same thing.
I tryed 2 new memory cards and both gave me the same messages.
could I have some help pls.

I remind you that if you have something calling itself a Nokia N95 8GB that has a memory card slot, then it most certainly isn't a genuine Nokia device.
This being the case, all bets are off when it comes to hardware compatibility and you will receive no support here. All I can say is simply that the µSD card reader in your phone is most likely not an SDHC reader, meaning that it won't accept cards greater than 2GB.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Nokia n95 8gb Do i need a sim card to detect my ph...

    nokia n95 8gb Do i need a sim card to detect my phone with a computer....

    After reviewing your other posts, I have to agree with psycho that your phone is probably a fake. You should return it to the person you bought it from for a refund.

  • Any one know when the iPad4 will be able to read 64gb exFAT memory cards?

    Any one know when the iPad4 will be able to read 64gb exFAT memory cards?

    Currently, the camera connection kit/iPad http://support.apple.com/kb/HT4101 can't read SDXC cards formatted ExFAT, and although not specified in the above link, 32GB cards are the max size. Next week when iOS 7 is released, maybe that will change.
     Cheers, Tom

  • N81 8GB can there be another memory card working w...

    ..................................................​..i wanna know becuz i wanna buy a n81 8GB and thinking of putting another memory card? Is the 8GB hard drive or a memory card. And is there any Wi-Fi?And is the screen bigger than N72? And one of my friends is saying that there is a problem with the buttons(the numbers) like they are messed up and when he puts it in his pocket the button get pressed.
    Nokia N72

    the 8gig is internal memory (hard drive) and you don't have a slot for another memory card...only the new n96 has that accessibilty and it has 16 gig internal hard drive...the screen is quite big...and the keys are not a problem 4 me....

  • How can I make my mac book pro read a SDHC memory card

    Can someone tell me how to make my mac book pro read an SDHC memory card?

    http://support.apple.com/kb/HT3553

  • HT1386 Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • My iPad no longer detects my memory card reader to transfer photos from my camera?

    My iPad is no longer detecting my apple memory card reader to transfer photos from my camera to my iPad 2

    You could try closing the Photos app completely and then re-open it to see if that makes a difference : from the home screen (i.e. not with Photos 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Photos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Are you adding the photos yourself to the card via a computer, or is it straight from a camera ?

  • Laptop will not read any memory cards

    Laptop Model: Satellite P500 (PSPE8C-026006)
    I have tried several times to get this memory card reader to work. At first, I tried putting in a memory stick PRO Duo with the memory stick pro adapter (so that it could read it), and I was getting a "File I/O" error and that the stick had to be formatted. I tried again with several other different sticks and got the same error. I then tried to update the drivers for the device and still no luck. But now, the memory stick is not even being detected at all.
    Could someone please give me a good link to the latest driver for this memory card reader + how and where the device will appear on the Device Manager list so I know it's properly installed.

    Satellite P500-026 (PSPE8C-026006)
    (Windows Vista Home Premium 64-bit) 
       Card Reader for Windows Vista 64bit, 2.0.06A, 6/24/2009
       O2 Card Reader Controller-2.0.06A.zip
    My card reader (in a Lenovo machine) is under PCMCIA adapters in Device Manager.
    -Jerry

  • N95 8GB v20.0.016 - mass memory failure #3

    For the third time my N95 8GB has managed to corrupt its mass memory ("mass memory corrupted") - only this time, I am unable to reformat it at all!
    The problem behaviour is as follows:
    Used the phone last night to take several pictures, accessing the Gallery at one stage to find and delete one picture. This afternoon I look for the photos to review, and the '200902' folder (images for February) on the mass memory has no subfolder and is empty. However, I DO have a video saved on the phone from the 7th of February!
    This afternoon I am able to take as many pictures as I like and they are saved correctly in the gallery and the 200902 folder. I had used about 5.2GB of the mass memory at this point. (It may be worth noting that I would occasionally get the message 'Gallery: Memory full' whilst browsing the gallery, but never at any other time).
    At this stage, the mass memory is still fully populated, so I thought it would be best to cut my losses and take a full phone backup. The backup process fails, with an error along the lines of having lost connection with the phone.
    I check file manager to see what's going on, and the following message appears on the memory card page: "(no data)".
    All previous times the handset corrupted its memory, the trigger seemed to be a reboot of the handset. (Contents were lost upon returning to File Manager after a reboot). Having not rebooted the phone at all in the last 24 hours, I was surprised that the memory card contents had apparently disappeared without any application being launched and apparently no new data writing attempts being made. Perhaps the read operation for the backup caused the failure? But this still does not explain how all my February photos were deleted.
    Without any obvious way of getting to my files, I rebooted the phone, returned to file manager and was greeted by the familiar: "(mass memory corrupted)".
    As mentioned previously, when this happened before I was able to format the memory via Menu -> Tools -> Utilities -> Memory -> Format. This time, I receive the message: "Mass memory is in use by other application. Continue anyway?". I select 'Yes' - but the handset simply returns to the memory screen and "(mass memory corrupted)". This still happens even after a reboot.
    I have performed 'Factory settings' reset via the phone menus, a 'hard reset' via code *#7370#, a format by holding *, 3 and the call answer button whilst powering on the phone - none of these prevent the 'Mass memory is in use' error from occurring. I have also attempted to format drive E (mass memory) but this just returns an error code. When I attempt to upgrade the firmware, the process fails every time after ~3 minutes saying that the connection with the phone has been lost (the warnings about upgrading do state that the mass memory should NOT be encrypted, so I presume that it being inaccessible is equivalent to this).
    I cannot see any way to format the 8gb memory so that I can make it usable once more! The phone was not dropped or damaged in any way in the last 24 hours, yet it seems that something must have physically changed inside it?
    The only parallel I can draw between this incident and the previous one is that both times, the memory was around 2/3rds full (around 5.5GB). I am wondering if perhaps the FAT table outgrows itself and dies?
    My 1 year warranty expired 3 weeks ago - I am hopeful my network operator will be able to provide a replacement and that this phone just has a 'bad' memory chip - it really is a superb phone barring this infuriating corruption problem mine seems to have!
    If anyone could shed any light on a solution it would be much appreciated
    Thanks,
    Alex
    Message Edited by dazz19 on 15-Feb-2009 11:43 AM

    In the end my operator agreed to replace the handset for me after a lot of to-ing and fro-ing. In my opinion the problem was caused by a faulty memory chip.
    Alex
    p.s. - the old handset was sent to the operator for repair and they were unable to repair it, only offer a refurbished replacement. With the greatest of respect, it's good to know my case is not unique!
    Message Edited by psx9 on 12-May-2009 01:10 AM

  • I cannot get my 50D to detect the memory card

    My 50D all of a sudden stopped detecting a memory card

    If the card currently has any stored images I would attempt to get them off and then do an in camera low level format and retest.
    Also, it is rare but sometimes the pins in the CF memory card socket can be damaged (bent usually).  Get a very bright flashlight, remove the memory card and look carefully at the bottom of the socket and examine the pins.

  • G5 won't read my new memory cards now?

    Ok, so after going through a whole mess of getting the wrong memory cards (see this post: http://discussions.apple.com/message.jspa?messageID=8321578), I ordered new ones (which fit in just fine), but now that I've inserted them, the computer isn't recognizing them.
    Yes, I've got them all the way in so the latches close, fitting into the slots on the side of the card, and they look as far in as the ones that were already in the system. Yes, I installed a pair, label side up. And yes, I followed Apple's online manual about putting the first sets in the slots marked 1, and now this is my first set for a pair of (outside) slots marked 2.
    I've done and checked all this, but still when I check my Memory in the system profiler, the slots come up as empty.
    I also tried resetting the NV-Ram by doing that apple/option/o/f thing, since I saw it suggested in another threadin this forum. Still the same issue. Am I missing some obvious step (I did follow the online manual) or any ideas of what could be wrong?

    I'd bet you bought high-density ram. The G5 cannot use high-density ram so if that is the case you will have to exchange it for low-density ram which can be somewhat hard to find these days.
    The best bet is to buy from a company that lists/sells RAM by computer model rather than memory speed/type.

  • X100e: Any memory card that won't protrude?

    I read somewhere that using an SD/SDHC card in the built-in card reader of the X100e will leave so much of the card sticking out that it's inadvisable to leave a card in when you slip the laptop into a bag.
    Is there any type of card that would be flush with the outside of the machine?  Perhaps a memory stick micro?
    Moderator edit: Removed accidental duplication.

    Hello,
    A Secure Digital (SD) card sticks out about 11mm and a Memory Stick PRO Duo sticks out about 5mm.  I definitely would not leave a memory card in the slot that sticks out this far.  If you want to have a flash RAM card permanently attached (ReadyBoost, perhaps), then you might want to consider a USB flash drive, like the Buffalo RUF2-PS-RD or a Kawau C266 MicroSD card adapter (plus appropriate MicroSD card) .  They both look like they might be small enough to fit with inside a properly sized-bag while still installed in an X100e. 
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • N95 8GB Barcode reader

    I have a N95 8GB phone with S60 V3 OS loaded. The barcode does not read any data,the red/yellow rectangle/trapezium tries to box in the bar code on products but does not read anything. Can someone help?

    The barcode reader is a bit tricky to use.
    -you must have steady hands or better place it on a table and point it to a code.
    -all it does is just translate the Bars in to numbers for you to store for records.(which never really works)
    -Perhaps there is other use of it in the nokia website to create your name and generate a code to it.
    - Check out this code by el_loco here. it works better with thes kind of codes.
    Mark me a KUDOS if this has helped...

  • MacBook Pro suddenly won't read SanDisk 8G memory card, nor Canon T2i USB connection.

    Suggestions?
    I've plugged the memory card into the slot several times not even a week ago and it worked just fine...now it won't.
    I have tried plugging the camera in via the USB hook up and nothing happens but yet it works fine on other computers I've used.

    I just received the following helpful URL link from SanDisk tech support.
    http://kb.sandisk.com/app/answers/detail/a_id/60
    SanDisk responded within 5 hours of my inquiry. After removing all USB devices from my iMac and reinserting the card reader alone, the reader started working again. I ejected it numerous times from USB ports on the iMac as well as from a USB hub. After plugging my other USB devices back in, I have not detected if there was a device which was causing the conflict. As a precaution I have removed USB devices that are only used periodically such as a Colorvision Spyder2Express device used every 30 days or so to color correct my monitor.
    Hope this helps others with Mac card reader issues.

  • Photosmart 3210 All-in-One printer will not read Micro SDHC memory card. Help!

    I have a Photosmart 3210 All-in-One printer that will not read my Micro SDHC memory card. Help! I get an memory card error message but no idea where to go from there.

    Hello
    I understand the printer can't read the memory card.
    This is a url for the printer specifications and include the memory card types supported.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00408357&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Here is a url for troubleshooting memory cards.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for