N95-8GB - Not able to connect in Data Transfer Mod...

Hi all,
Recently I bought N95-8GB and installed PC Suite which comes along with the phone in my OS Windows Vista Home Premium. When I try to connect my phone in Data Transfer mode, I am getting message "Found new hardware - Windows needs to install driver software for your unknown device" and I am not able to find any driver for the same.
Please help me out to solve this problem.
Regards,
S.Suresh

just let the wizard run through and select the options that windows will search for the friver itself. the dirvers are included in nokia Pc suite package.
YOu can also try to use the standard NOkia PC Suite from www.nokia.com/pcsuite or generally look for a fresh version of NSeries PC Suite from thephone web-pages, the CD-ROM versions are normally outdated

Similar Messages

  • Not able to connect to Data service on Airtel

    Hi!
    I have a nokia Lumia 800 handset with airtel as service provider, I activated their GPRS data service (read edge) and I am not able to connect to internet, however earlier I had Vodafone and I never faced such issues with it, I have tried out every possible solution in book i.e.
    1. Set Apn to airtelgprs.com
    2. Using Nokia network setup app.
    3. restarting my phone several times .
    Nothing seem to work has anyone faced such issue if yes could you please help me.

    Have you contacted Airtel to make sure every thing is working and activated their end?

  • Unable to connect via "Data Transfer" Mode On N95 ...

    Its been happening for a little while now. When i plug the USB cable in, it asks if i wanna connect via PC Suite, Data Transfer etc
    When i click Data Transfer it says the following:
    "Unable to activate Data Transfer Mode. Mass Memory is in use by another application"
    Does anyone know the fix for this problem?
    Many thanks
    Message Edited by tiff777 on 06-Nov-2008 07:56 PM
    Message Edited by tiff777 on 06-Nov-2008 07:57 PM

    Hi There
    Im not sure this would work for you all but i came accross this discussion after suffering the same problem and after pulling my hair out i finally solved it and thought it was only fair i posted how.
    I had tried all options on here apart from deleteing everything off my memory card ( i wasn't keen on this option ) i checked the running apps and it just showed that standby was running,
    So i thought i would try uninstalling recently installed item one by one, i had recently installed some  software called CALL RECORDER  and although it was not showing up that it was running it was in the background after deleting this the problem was solved ,
    So try and think if there are any apps that you have installed that may be running in the background but not showing up , i would advise deleting these one by one as i did and if it still doesnt work you can reinstall it ,
    hope this helps
    BUT EVEN AFTER ALL THIS I STILL LOVE MY N95 8GB !!!!!!!!!!!!!!!!!!!!!!!

  • N95 8Gb USB Data Transfer Mode not working

    I have a bizarre problem with USB Data transfer.
    a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
    b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
    c) Later in the day, connected PC #2 and did the same with the last few applications.
    d) Next day tried to connect PC #1 and it didn't work
    e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
    f) Went to PC #2 and tried - Data transfer mode works - no problem.
    g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
    h) I have tried it on PC #3 and this works as well - no problem.
    1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
    2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
    So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
    All PC's are XP SP2.
    Any suggestions on anything else to try ?
    Regards

    SOLVED by:
    - attaching N95, selecting USB Data Transfer Mode
    - Going to Device Manager
    - Selecting the USB Mass Storage Device for N95
    - "Uninstall"
    - Remove cable when N95 says its safe to
    - Re-attach cable
    The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
    No idea what messed it up in the first place though.

  • Not able to connect N82 to pc in data transfer mod...

    I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
    My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
    Thank you for your support.
    mlhpr
    Solved!
    Go to Solution.

    22-Mar-2008 02:51 PM
    scoobyman wrote:
    Hi mlhpr
    If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
    Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
    :I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
    Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
    mlhpr

  • HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

    I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

    Read http://support.apple.com/kb/ts3367

  • Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

    hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Help : Not able to connect IdeaPad Tablet K1 to PC with the USB data cable

    Dear All,
    Appreciate very much your help on this.
    I am not able to connect my IdeaPadTablet K1 to PC with the USB data cable.
    Anyone facing the same problem?
    Appreciate your kind advise on the solution.
    thanks in advance,
    LL.

    Hi all,
    Can you try the steps outlined in the following link? It had help resolve the issue for some users.
    http://consumersupport.lenovo.com/au/en/HintsandTips/hints_show_13180405354336.html
    Do feedback.
    thanks!
    lak_sg
    WW Social Media
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Problem Using HTTP Dispatcher -- Could Not able to get the data in JSP

    Hi, I am using HTTP Dispatcher to send my events to particular URL which is a JSP page. I am trying to populate the received event through URL and populate to a oracle data base. But could not able to get the data in Oracle database.
    Code is :
    <h1>JSP Page</h1>
    <%
    long type = 0;
    String tagId = null;
    String timeStr = "0";
    String deviceName = "";
    // Get Event Parameters
    // Available Parameters: id, siteName, deviceName, data, time, type, subtype, sourceName, correlationId
    try
    type = Long.parseLong(request.getParameter("type")); // Get type
    tagId = request.getParameter("id"); // Get tagId
    timeStr = request.getParameter("time"); // Get time
              deviceName = request.getParameter("deviceName");
    catch (Exception e)
    out.println( "Error: "+e.getMessage() );
              // Write into DB.
              try {
              if ((tagId == null) || (type != 200) ){
                   // Do Nothing
                   //return;
              } else {
                   OracleDataSource ods = new OracleDataSource();
                   String URL = "jdbc:oracle:thin:@//3.235.173.16:1525/vislocal";     
                   ods.setURL(URL);
                   ods.setUser("cus");
                   ods.setPassword("cus");
                   Connection myConn = ods.getConnection();     
                   Statement stmt = myConn.createStatement();
                   String selectQuery =
                             "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                        "cus.rfid_raw_reads ";
                   ResultSet rs = stmt.executeQuery(selectQuery);
                   String maxId = "1";
                   if (rs.next()) {
                        maxId = rs.getString(1);               
                   String selectMaxTagIDQuery =
                             "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                        "cus.rfid_raw_reads WHERE tag_id = '" + tagId + "'" ;
                   stmt = myConn.createStatement();
                   rs = stmt.executeQuery(selectMaxTagIDQuery);
                   String maxTagId = "1";
                   if (rs.next()) {
                        maxTagId = rs.getString(1);               
                   long primaryKey = 1;
                   long tagKey = 1;
                   try {
                        primaryKey = Long.parseLong(maxId) + 1;
                        tagKey = Long.parseLong(maxTagId) + 1;
                   } catch (Exception e) {
                   long currentTime = System.currentTimeMillis();
                   long updateKey = (tagKey - 1);
                   String updateQuery = " UPDATE cus.rfid_raw_reads SET read_end_time = " + currentTime + " WHERE rfid_raw_reads_id = " + updateKey;
                   Statement updateStmt = myConn.createStatement();
                   updateStmt.execute(updateQuery);     
                   String query =
                        "INSERT INTO cus.rfid_raw_reads (rfid_raw_reads_id, tag_id,device_name,read_start_time) VALUES ("+ primaryKey + ",'" + tagId + "'," + deviceName + "'," + System.currentTimeMillis() + " )" ;
                   Statement insertStmt = myConn.createStatement();
                   insertStmt.execute(query);     
                   myConn.commit();
                   myConn.close();
              } catch (Exception e) {
    %>
    <p>For browser debug:
    <%
    out.println( "Type="+type+" ID="+tagId +" time="+timeStr );
    %>
    Kindly suggest where is the problem...
    Thanks and regards
    Mohammad Nasim Akhtar

    HI Prabhat,
    Thanx for your reply, I worked out and able to receive the data in oracle database, Actually there was some problem in insert Query. Now I have tested the same... and able to edit the same in the Database.....
    But I am facing a new problem, Http Dispatcher in SES console is displaying all the Events generated as well as event in Que but there is no events in the Event Send. I guess it is not able to send the events.....?????
    Event statical is showing like this
    Events Received: 0 (0.00/sec)
    Events Generated: 311 (0.19/sec)
    Events Sent: 2 (0.19/sec)
    Queued Events: 309 (0.19/sec)
    Kindly suggest where is the problem, Is it a JSP problem or OSES end problem.....
    Thanks and regards
    Nasim

  • Enterprise Manager is not able to connect to the database instance. The sta

    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
    Listener is shown as unavailable.
    lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2012 11:52:40
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=freds-server.i-surname.co.uk)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 27-NOV-2012 11:50:02
    Uptime 0 days 0 hr. 2 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /opt/oracle/11g/network/admin/listener.ora
    Listener Log File /opt/oracle/diag/tnslsnr/freds-server/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "GWORCL.i-surname.co.uk" has 2 instance(s).
    Instance "GWORCL", status UNKNOWN, has 1 handler(s) for this service...
    Instance "GWORCL", status READY, has 1 handler(s) for this service...
    Service "GWORCLXDB.i-status.co.uk" has 1 instance(s).
    Instance "GWORCL", status READY, has 1 handler(s) for this service...
    The command completed successfully
    I suspect that this is not just an OEM issue.
    see
    Listener working but not working for Enterprise manager oracle 11gr2 Linux.
    for configuration files
    Edited by: Neill_R on Nov 27, 2012 11:51 AM

    This was solved by : Osama_mustafa
    in the general questions forum
    emca -deconfig dbcontrol db -repos drop
    emca -config dbcontrol db -repos create

  • Enterprise manager is not able to connect to database instance

    Hi
    I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
    I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
    But the problem is that, when I try to connect to database with EM, it says:
    Enterprise manager is not able to connect to database instance . The state of the components are listed below.
    Can anoyone help me?

    user10637311 wrote:
    When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
    "emca -config dbcontrol db -repos create". for these two cases istener should be running.
    emctl start dbconsole -> to start dbconsole service
    emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
    emca -config dbcontrol db -repos create :
    <last part>:
    INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
    s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
    Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
    INFO: Creating the EM repository (this may take a while) ...
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
    SEVERE: Error creating the repository
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
    cl\emca_repos_create_<date>.log for more details.
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error creating the repository
    Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
    a_2010-02-18_02-01-40-AM.log for more details.
    Could not complete the configuration. Refer to the log file at C:\oracle\product
    \10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
    ils.
    C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
    cl\emca_repos_create_<date>.log:
    Check if repos user already exists.
    old 6: WHERE username=UPPER('&EM_REPOS_USER');
    new 6: WHERE username=UPPER('SYSMAN');
    old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
    new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
    old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
    new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
    old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
    new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
    old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
    new 17: raise_application_error(-20001, 'SYSMAN already exists..');
    old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
    new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
    DECLARE
    ERROR at line 1:
    ORA-20001: SYSMAN already exists..
    ORA-06512: at line 17

  • Livecache database instance is not able to connect from DBMGUI

    Hello,
    We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
    DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
    Could anybody please help me out if faced this problem.
    Earlier it was working fine. But now It 's not able to connect through DBM tool.
    Any help would of great help..
    Thanks.
    Dinesh
    please find xserver*.prt files as attached
    Date       Time       PID Typ MsgID  Label    Message-Text
    2009-06-12 03:10:43  2732     12902  XSERVER  started, 'X64/SUN   7.6.04   Build 015-123-189-221'
    2009-06-12 03:10:43  2732     12904  XSERVER  Service port is 7210
    2009-06-12 03:10:43  2732     12922  ENVIRON  Command line arguments
    2009-06-12 03:10:43  2732     12924  ENVIRON   [1] start
    2009-06-12 03:10:43  2732     12923  ENVIRON  Command line argument dump completed
    2009-06-12 03:10:43  2732     12898  ENVIRON  Resource limit dump start
    2009-06-12 03:10:43  2732     12898  ENVIRON  Started by user id 58007 group id 1670
    2009-06-12 03:10:43  2732     12898  ENVIRON  Current user id 58007 effective id 58007
    2009-06-12 03:10:43  2732     12898  ENVIRON  Current group id 1670 effective id 1670
    2009-06-12 03:10:43  2732     12898  ENVIRON   cpu time unlimited
    2009-06-12 03:10:43  2732     12898  ENVIRON   number of processes 29995
    2009-06-12 03:10:43  2732     12898  ENVIRON   number of open files 2048
    2009-06-12 03:10:43  2732     12898  ENVIRON   core size unlimited
    2009-06-12 03:10:43  2732     12898  ENVIRON   file size unlimited
    2009-06-12 03:10:43  2732     12898  ENVIRON   heap memory size unlimited
    2009-06-12 03:10:43  2732     12898  ENVIRON   stack memory size 8192 KBytes
    2009-06-12 03:10:43  2732     12898  ENVIRON   virtual memory size unlimited
    2009-06-12 03:10:43  2732     12898  ENVIRON  Resource limit dump completed
    2009-06-12 03:10:43  2732     12898  ENVIRON  Environment dump start
    2009-06-12 03:10:43  2732     12898  ENVIRON   PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
    2009-06-12 03:10:43  2732     12898  ENVIRON    :/opt/SUNWspro/bin
    2009-06-12 03:10:43  2732     12898  ENVIRON   IFS=
    2009-06-12 03:10:43     0    0
    2009-06-12 03:10:43  2732     12898  ENVIRON   TZ=NZ
    2009-06-12 03:10:43  2732     12898  ENVIRON   TMP=/var/tmp
    2009-06-12 03:10:43  2732     12898  ENVIRON   TMPDIR=/var/tmp
    2009-06-12 03:10:43  2732     12898  ENVIRON   USER=sdb
    2009-06-12 03:10:43  2732     12898  ENVIRON   LOGNAME=sdb
    2009-06-12 03:10:43  2732     12898  ENVIRON   DBROOT=/sapdb/programs
    2009-06-12 03:10:43  2732     12898  ENVIRON   LD_LIBRARY_PATH=/sapdb/programs/lib
    2009-06-12 03:10:43  2732     12898  ENVIRON  Environment dump completed
    end of startup -
    2009-06-12 03:10:44  2732 WNG 12458  XSERVER  NISSL Utility init: CDKLoadSAPCryptModule: 51
    2009-06-12 07:54:23  2732 ERR 11379  CONNECT  Error getting TCP/IP host by address: '10.115.104.42.'
    2009-06-12 08:47:00 17388 ERR 11925  XSERVER  Send packet, Ref:9 - connection closed (send:EPIPE)
    current write position -

    Hi Ivan,
    thanks for the reply, i used the commands suggested by you.
    nzlsfn40:ltradm 43% pwd
    /sapdb/data/wrk
    nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
    OK
    State
    OFFLINE
    nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
    OK
    nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
    nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
    db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
    Dinesh
    logs :-
    2009-06-12 10:58:34   137     12929 TASKING  Task T114 started
    2009-06-12 10:58:34   137     11007 COMMUNIC wait for connection T114
    2009-06-12 10:58:34   137     11561 COMMUNIC Connected  T114 local 3966
    2009-06-12 10:58:34   137     11509 COMMUNIC Connection broken by appl state 10 T114
    2009-06-12 10:58:34   137 WNG 11824 COMMUNIC Releasing  T114 connection aborted
    2009-06-12 10:58:34   137     12827 COMMUNIC wait for connection T114
    2009-06-12 10:58:35    11     11561 COMMUNIC Connecting T115 local 3966
    2009-06-12 10:58:35   138     12929 TASKING  Task T115 started
    2009-06-12 10:58:35   138     11007 COMMUNIC wait for connection T115
    2009-06-12 10:58:35   138     11561 COMMUNIC Connected  T115 local 3966
    2009-06-12 10:58:35   138     11509 COMMUNIC Connection broken by appl state 10 T115
    2009-06-12 10:58:35   138 WNG 11824 COMMUNIC Releasing  T115 connection aborted
    2009-06-12 10:58:35   138     12827 COMMUNIC wait for connection T115
    2009-06-12 10:58:36    11     11561 COMMUNIC Connecting T116 local 3966
    2009-06-12 10:58:36   139     12929 TASKING  Task T116 started
    2009-06-12 10:58:36   139     11007 COMMUNIC wait for connection T116
    2009-06-12 10:58:36   139     11561 COMMUNIC Connected  T116 local 3966
    2009-06-12 10:58:36   139     11509 COMMUNIC Connection broken by appl state 10 T116
    2009-06-12 10:58:36   139 WNG 11824 COMMUNIC Releasing  T116 connection aborted
    2009-06-12 10:58:36   139     12827 COMMUNIC wait for connection T116

  • Problem: Enterprise Manager is not able to connect to the database instance

    Hello,
    I've got problem with EM. When I try to connect to it I get the following error:
    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
    Database Instance, Listener and Agent are all green.
    Few more information:
    OS: Win7 64 bit
    -installed loopback adapter. I can ping my computer name (J-PC) without problem and it pings back 10.10.10.10 address.
    -I have set the ORACLE_HOME and ORACLE_SID env variables
    -I can login to sqlplus with sysman account
    -emctl status dbconsole shows that the EM 11g is running
    I've been struggling for some time trying to get EM running as it should, but no luck so far.
    If you need any more info, do ask. Tnx.

    Hi,
    Regarding causes:
    1. This is inside listener.ora file:
    SID_LIST_LISTENER =
    +(SID_LIST =+
    +(SID_DESC =+
    +(SID_NAME = CLRExtProc)+
    +(ORACLE_HOME = C:\app\J\product\11.2.0\dbhome_1)+
    +(PROGRAM = extproc)+
    +(ENVS = "EXTPROC_DLLS=ONLY:C:\app\J\product\11.2.0\dbhome_1\bin\oraclr11.dll")+
    +)+
    +)+
    LISTENER =
    +(DESCRIPTION_LIST =+
    +(DESCRIPTION =+
    +(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))+
    +(ADDRESS = (PROTOCOL = TCP)(HOST = J-PC)(PORT = 1521))+
    +)+
    +)+
    ADR_BASE_LISTENER = C:\app\J
    ...and this is examples of errors in emoms.trc:
    +2012-05-25 00:29:28,782 [HTTPThreadGroup-49] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Locale not recognized+
    +2012-05-25 00:29:28,798 [HTTPThreadGroup-49] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = http://J-PC:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Locale not recognized)+
    +2012-05-25 00:29:28,860 [HTTPThreadGroup-49] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Locale not recognized+
    +2012-05-25 00:29:28,872 [HTTPThreadGroup-49] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = http://J-PC:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Locale not recognized)+
    +2012-05-25 00:29:40,908 [HTTPThreadGroup-49] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Locale not recognized+
    +2012-05-25 00:29:40,924 [HTTPThreadGroup-49] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = http://J-PC:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Locale not recognized)+
    +2012-05-25 00:29:52,811 [SystemThreadGroup-8] ERROR app.SessionObjectManager sessionDestroyed.128 - java.sql.SQLException: Locale not recognized+
    java.sql.SQLException: Locale not recognized
    2.
    Running lsnrctl status:
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 25-MAY-2012 07:54:17
    Uptime 0 days 0 hr. 21 min. 25 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\app\J\product\11.2.0\dbhome_1\network\admin\listene
    r.ora
    Listener Log File c:\app\j\diag\tnslsnr\J-PC\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J-PC)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Tnx for the help.

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • 11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit

    Hi Experts,
    I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
    I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
    I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
    However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
    (No error, after waiting for >20 minutes I have to kill the command.)
    =================
    Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
    - "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
    Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
    - 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
    [    CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
    "tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
    Output of LSNRCTL:
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
    Start Date 26-APR-2012 14:35:17
    Uptime 0 days 0 hr. 4 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
    Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    Services Summary...
    Service "O11GR2" has 2 instance(s).
    Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
    Instance "O11GR2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    =================
    This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
    I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
    Any suggest/help is greatly appreciated on this.

    ------------------------------tnsping-------------------------
    C:\>tnsping o11gr2
    TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
    ))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
    OK (30 msec)
    C:\>
    -----------------------------ping-------------------------------
    C:\>ping J1009615W7LT.jda.corp.local
    Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Ping statistics for fe80::20c9:b748:311a:95e4%14:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\>ping 10.60.200.221
    Pinging 10.60.200.221 with 32 bytes of data:
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Ping statistics for 10.60.200.221:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\>
    -----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
    </msg>
    <msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:26 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:43 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:37:08 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>WARNING: Subscription for node down event still pending
    </txt>
    </msg>
    <msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Trace level is currently 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Started with pid=11640
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Listener completed notification to CRS on start
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:54:32 * ping * 0
    </txt>
    </msg>
    Edited by: 850920 on Apr 26, 2012 11:59 AM

Maybe you are looking for

  • Error message "EDI: Field SEGNAM in data record is default"

    Hi all, I am facing issue in Idoc creation. I am getting error message saying 'EDI: Field SEGNAM in data record is default' and so Idoc is not getting created. Can anybody tell me how to resolve this. I checked in debugging mode and found that this e

  • Little help in LDAP debugging for BOXI R2 SP3 on IIS

    Hi, Once of my client is on BOXI R2 SP3 with IIS as web Application server on windows server 2003. We have LDAP authentication enabled which is working fine but sometime we get error when trying to add new LDAP user. We get error message that can not

  • How to generate html-code using csv input with JSP or JAVA???

    Hello, I want to read out a .csv-file and generate html-code dynmically with JSP in an EP6 Application. The problem is, that the csv-file can’t be located or openend. BTW if every knows a good tutorial or weblog for this, please post the link. It’s l

  • How to align eyes in photo montage ?

    I'm doing a "daily photo" montage of me and have more than 500 photos of my face. I just want my eyes to align perfectly in the different photos so when I play them fast, my face is constantly well positioned and blend perfectly with the other photos

  • Action not possible because change version exist

    Dear All, We are at SRM5.0- Extended Classic scenario and facing issues for changing some of the PO documents. When the buyers are trying to change the PO, error is getting populated as 'Action not possible because change version exist'. This error i