N95 8GB unlokced , Vibrating alert does not work

Hi
I just bought used N95 8 GB from my friend which is locked to a network provider.
My friend took it to shop to unlock service provider (he didn't realise that service provider does it for free), now I tried to test income call vibration but it seems to me it does not work , I tried under Tool > Profile > Create new profile (vibrating on) ,,,,but still there is no vibration when I receive call!!!
I tried "Factory Settings" for the mobile but still same problem
Would unlock be the reason for that (I don't know if vibration was working before unlock) ?
Any other suggestion how to test that ?
Thanks

jimmyireland wrote:
1st see if you have the latest firmware installed, if you dont have the latest update and if problem still occurs after the update try a hard reset the code is Press *#7370#
if this fails you will need to take it to a nokia care centre.
1- Yes it already has updated firmware
2- I did a hard resst without any success.
3- Would unlocking process normally create this problem ?
Message Edited by zillah on 20-Jun-2009 12:02 AM

Similar Messages

  • I-5 vibration function does not work - any ideas?

    i-Phone 5 vibration function does not work - any ideas why?

    I am having similar issues.  I took to Apple Genius Bar today and of course it would not do it. His suggestion was to restore iOS 6 and see what happens.  I'm currently restoring and I'll see what happens

  • N95 8Gb USB Data Transfer Mode not working

    I have a bizarre problem with USB Data transfer.
    a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
    b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
    c) Later in the day, connected PC #2 and did the same with the last few applications.
    d) Next day tried to connect PC #1 and it didn't work
    e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
    f) Went to PC #2 and tried - Data transfer mode works - no problem.
    g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
    h) I have tried it on PC #3 and this works as well - no problem.
    1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
    2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
    So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
    All PC's are XP SP2.
    Any suggestions on anything else to try ?
    Regards

    SOLVED by:
    - attaching N95, selecting USB Data Transfer Mode
    - Going to Device Manager
    - Selecting the USB Mass Storage Device for N95
    - "Uninstall"
    - Remove cable when N95 says its safe to
    - Re-attach cable
    The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
    No idea what messed it up in the first place though.

  • Ignoring shared calendar alerts does not work

    I love the being in the Apple ecosystem and so does my wife.  I subscribe to several shared calendars for my kids sports teams, as well as my own personal and business calendar and my wife's family calendar.  All together, I have 13 calendars that show up in my iCal (MacBook Pro running the latest OS X), 2 iPhone 4S's, and 2 iPad's.
    My wife uses her calendar a lot and while I like seeing her schedule on my calendar, I can never get iCal or my iPhone to ignore the alerts pertaining to her calendar.  I've changed the setting in the calendar several times, but can never seem to get it to ignore - even with the box checked appropriately.  It just now occurred to me to delete the calendar and resubscribe to see if that works.  I'll follow up in a few minutes.
    Any ideas in the event it doesn't work?  It seems like there's something I'm missing...

    Yes, it's still a problem with iOS2 and Mavericks.  Both have an option to not recieve the alerts, and it's working for me in iOS7, but not on Mavericks.  Every time my wife's calendar has an event, I get an alert.  I've tried changing the preferences setting and quitting and restarting, no luck.  I stil get the notifications.
    Notification center is too much of a good thing!

  • In-app vibrate toggle does not work

    Issue: Everytime I get a message on either of the messaging apps like WhatsApp or Hike messenger or Google Hangouts, the phone rings, vibrates and the screen comes on.
    What I want: Everytime I get a message, I just want the phone to ring. I dont want the screen to turn on, nor do I need the phone to vibrate.
    What I have tried: In each application, I have disabled the 'In-app Vibration' and it has not done what it was supposed to. The only thing that worked the way I wanted was iMessage. Under Sounds, I set the vibrate to NONE for text message. So, none of the third party apps notify me the way I want it to.
    I have spoken to Apple support over the phone and I was asked to get in touch with each of the application developers, which I found ridiculous and wouldn't waste so much time on it.
    I was wondering if anyone here can help me with this.
    Thanks.

    NOBODY??!!

  • Schedule/Alert does not work ZAM 7.5 Webconsole

    I tried to configure a "Achedule/Alert", but I get the following message:
    Unable to complete .
    Details:
    I configured the mailserver as I did in ZAM 7, but I get the same error. It doesn't matter if I only want to store a report or mail it also.
    In the logfile (ColSvrCoreEvent20091009) I find this message:
    <EVENT AT="9-10-2009 9:58:43" SEVERITY="Warning">
    Message Layer Error in Message Server Error Event Service Host
    Implementation specific reason., Host = 00000000-0000-0000-0000-000000000000
    Message Layer Error in Message Server Control Layer Service Remote Host
    Unrecoverable error, connection aborted.
    Message Layer Error in Message Server Control Layer Receive Message
    Message Layer Error in Message Server Control Layer Receive Data
    Message Layer Error in Socket Receive
    Message Layer Error in WinSock Library recv
    Socket: 1232, Error Code: 0
    </EVENT>
    I can't pinpoint the cause with this message.
    Is there someone who has tackled this problem within ZAM 7.5 and windows 2003 server?

    I don't know if this is helpful. I still get the same messages since I started this thread. I hope you can see what is going wrong.
    In the browser-window I see this:
    Unable to complete .
    Details:
    .. when I try to make an alert. It doesn't make a difference if I wan't to mail the alert or store it on the server. I always get the same message in the browser-window.
    Thanks for your expertise,
    Paul
    Originally Posted by blcald
    Can you supply your Task Server logs? That might shed some light on this for us. I am going off memory here but they will be on the your task server under Program Files, Novell, Asset Management in a folder callled logs. It will be date time stamped and have the work TaskSvr in the title of the text file.
    Read what you find in there to see what error messages are coming back.
    Thanks,
    Bryant

  • My vibrate does not work on my iphone 4

    My vibrate function does not work on my iPhone 4. Does anyone have any information on this or solution to the fault??
    Any feedback is much appreciated.

    http://www.apple.com/retail/
    make a reservation on top tool bar
    do a back up as if faulty Apple will exchange and your device will go

  • HT1267 IPhone4..Model MC603C/Ser#850441XGXA4S: I have update to 5.1.1. I am not alerted to my emails unless I tap on the mail app. Then the alert/banner appears. When I start up, the alert sounds but after that it does not work. Whats wrong?

    Ever since I updating my IPhone 4 to 5.1.1. my alert/banner does not work with my mail app. Initial startup it works but after that, it does
    not work. The only way I know there is a message by tapping on the mail app and then I hear the alert and the banner shows up. Prior
    to updating, it always worked. Is there a 'bug' in the system or is there something I am missing here.

    Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process.  Should have right-clicked on the phone device and did a manual backup.
    But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact.

  • My ringer does not work on my phone (not sure what happened, didn't smash it, nor did it fall to the ground), and I have been on silent/vibrate mode for a few months now. Unfortunately I am unable to listen to music without headphones, or get on speaker.

    I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
    Can anyone help?
    I have the iphone 4s.
    Thank you!

    Hey Chris,
    Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years.

  • After reset, Whatsapp does not work ...

    helll,
    I did Reset of my nokia N8 using the code.  it wiped the phone clean.
    i installed Whatsapp, went through the config, but does not work.  it looks like it is about to work, then just goes back to the main screen.
    when i check open apps, it does not show.
    suggestions?
    Nokia 3395
    Nokia 6600
    Nokia N95 8GB
    Nokia N8 (Anna)
    Nokia Lumia 930
    Solved!
    Go to Solution.

    I uninstalled it , reinstalled same issue. I uninstalled and installed from the WhatsApp site, it works....
    I don't care why, it works.
    Nokia 3395
    Nokia 6600
    Nokia N95 8GB
    Nokia N8 (Anna)
    Nokia Lumia 930

  • My camera does not work on my ipod touch 4th gen. it just goes to a black screen i have done everything from resetting and rebooting... help :(

    I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

    Hi,
    I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
    The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
    Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
    Thank you in advance for any help,
    Łukasz
    Solved!
    Go to Solution.

    Hi Lukasz,
    Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
    Vince.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • TS3274 sound does not work on my ipad, it worked early today, but now it does not, not sure what happen

    The sound on my ipad quit working, i was using it, and i went to do something, i come back to use it and now it does not work.  I have it on full volume.
    Can anyone help me please.
    Thanks Louise

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Enforcing JRE version for Applet does not work - 1.4.2

    Hi,
    Our application (Applet) requires JRE 1.4.2 .
    I believe I need to use STATIC VERSIONING as we want the client desktop to ONLY use 1.4.2 for our applet.
    So I followed the instructions mentioned in
    http://java.sun.com/j2se/1.4.2/docs/guide/plugin/developer_guide/using_tags.html#in-ie
    and
    http://java.sun.com/products/plugin/versions.html
    But for some reason the JAVA Installer fails to install the package.
    It comes back with this pop-up error message:
    Error - Java(TM) Installer
    Unable to download http://java.sun.com/update/1.4.2/1.4.2-b28.xml for installation
    Here is the jsp code snippet:
    <center>
    <OBJECT classid="clsid:CAFEEFAC-0014-0002-0000-ABCDEFFEDCBA" id="myapplet" NAME="myapplet"
        width="650" height="426" border="1" align="baseline"
        codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,0">
        <PARAM name="code" value="com.statestreet.gia.ui.applet.ComponentApplet">
        <PARAM name="codebase" value="/jars">
        <PARAM name="type" value="application/x-java-applet;jpi-version=1.4.2">
        <PARAM NAME="cache_option" VALUE="Plugin">
        <PARAM NAME="cache_archive" VALUE="jar1.jar,jar2.jar">
        <PARAM name="scriptable" value="true">
        <PARAM NAME="mayscript" VALUE ="true">
       <center>
        <P>This page requires the Java Runtime Environment Plug-in. If you see this message,
        the automatic install probably failed. <BR>Please <A href="http://java.sun.com/j2se/1.4.2/download.html">click here
    </A>
        to manually install the environment. If prompted, please choose "Run this file from its current location" or "Open"
    .<BR>
        Accept all of the defaults during the installation. When the installation completes, please click the refresh butto
    n on your browser. <BR>
        If this process does not work, please contact the Help Desk.
        </P>
        </center>
    </OBJECT>
    </center>I have tried changing the codebase by removing the "#Version part.." but still no result.
    Any suggestion is greatly appreciated.
    thanks
    hp

    Yeah, after hours of searching it must be so that my son has a 8GB i.e. a 2G version and mine just happens to be the 3G as I bought mine a month later....did not know how to know the difference but now solved, thnx.

  • Rule created to monitor a single line entries in a text.log file does not work

    Hi All,
    I have this strange issue. I created a script which generates .log file and i have configured a rule to monitor it. Whenever the .log is altered the alert does not come at all in SCOM 2012 R2.
    I want this alert to be raised when one specific line in the center is altered from LISTENING to NOT LISTENING.
    I have configured it. It triggered a alert for the first time and again it did not trigger at all.
    I created this rule and disabled it and overrided the value to true only to the MS acting as the watcher for this log file.
    The log file generates in the local drive of the MS itself.
    Changed the log watcher to a different server and also mentioned the application data source to a network location when the watcher was changed so it can pull the log accordingly.
    The log is generated in the MS itself. Tried using both local location where the log is located as well as converted the same to a network location still didn't help.
    C:\Port_checker is the directory where the .log file is located also there is no other log file present only 1.
    I also changed the parameters such as "Contains, Wildcard matches etc but nothing worked.
    Screenshots:
    2. 
    The SCOM Action account has Full permissions on all servers over the entire forest itself.
    Target used to create this rule is "Windows server operating system"
    Can any one help me please.
    Gautam.75801

    Since you have a script that updates a file line from "LISTENING" to "NOT LISTENING"
    you might want to try and configure a Two State Script Unit Monitor rather then a rule. So your script just need to check say every 5 minutes the content of the log file and generate an alert when it matches "Not Listening" and clear when
    it changes to "listening".
    http://www.systemcentercentral.com/wp-content/uploads/2009/04/HOW-TO_2-state_ScriptMonitor.pdf
    Cheers,
    Martin
    Blog:
    http://sustaslog.wordpress.com 
    LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Maybe you are looking for