N95 8gb v20.0.016 firmware

hi excuse my ignorance but what does the 20.0.016 upgrade give you cant find any noticeable changes apart from messing up ngage, also how does auto rotate work, i bit new to all this so advice greatly appriciated.
thanks steve.....
Solved!
Go to Solution.

V20 was mostly a bug fix release.
The only notable new feature was ASR (automatic screen rotation). This can be enabled in the display settings.
ASR works on most screens and menus (not the home screen) and basically all it does is rotate the screen when you turn it anti-clockwise. It doesn't rotate in any other direction.
It's main advantages is for viewing photo's easily.
Message Edited by psychomania on 15-Jul-2008 02:26 PM

Similar Messages

  • N95 8GB v20.0.016 - mass memory failure #3

    For the third time my N95 8GB has managed to corrupt its mass memory ("mass memory corrupted") - only this time, I am unable to reformat it at all!
    The problem behaviour is as follows:
    Used the phone last night to take several pictures, accessing the Gallery at one stage to find and delete one picture. This afternoon I look for the photos to review, and the '200902' folder (images for February) on the mass memory has no subfolder and is empty. However, I DO have a video saved on the phone from the 7th of February!
    This afternoon I am able to take as many pictures as I like and they are saved correctly in the gallery and the 200902 folder. I had used about 5.2GB of the mass memory at this point. (It may be worth noting that I would occasionally get the message 'Gallery: Memory full' whilst browsing the gallery, but never at any other time).
    At this stage, the mass memory is still fully populated, so I thought it would be best to cut my losses and take a full phone backup. The backup process fails, with an error along the lines of having lost connection with the phone.
    I check file manager to see what's going on, and the following message appears on the memory card page: "(no data)".
    All previous times the handset corrupted its memory, the trigger seemed to be a reboot of the handset. (Contents were lost upon returning to File Manager after a reboot). Having not rebooted the phone at all in the last 24 hours, I was surprised that the memory card contents had apparently disappeared without any application being launched and apparently no new data writing attempts being made. Perhaps the read operation for the backup caused the failure? But this still does not explain how all my February photos were deleted.
    Without any obvious way of getting to my files, I rebooted the phone, returned to file manager and was greeted by the familiar: "(mass memory corrupted)".
    As mentioned previously, when this happened before I was able to format the memory via Menu -> Tools -> Utilities -> Memory -> Format. This time, I receive the message: "Mass memory is in use by other application. Continue anyway?". I select 'Yes' - but the handset simply returns to the memory screen and "(mass memory corrupted)". This still happens even after a reboot.
    I have performed 'Factory settings' reset via the phone menus, a 'hard reset' via code *#7370#, a format by holding *, 3 and the call answer button whilst powering on the phone - none of these prevent the 'Mass memory is in use' error from occurring. I have also attempted to format drive E (mass memory) but this just returns an error code. When I attempt to upgrade the firmware, the process fails every time after ~3 minutes saying that the connection with the phone has been lost (the warnings about upgrading do state that the mass memory should NOT be encrypted, so I presume that it being inaccessible is equivalent to this).
    I cannot see any way to format the 8gb memory so that I can make it usable once more! The phone was not dropped or damaged in any way in the last 24 hours, yet it seems that something must have physically changed inside it?
    The only parallel I can draw between this incident and the previous one is that both times, the memory was around 2/3rds full (around 5.5GB). I am wondering if perhaps the FAT table outgrows itself and dies?
    My 1 year warranty expired 3 weeks ago - I am hopeful my network operator will be able to provide a replacement and that this phone just has a 'bad' memory chip - it really is a superb phone barring this infuriating corruption problem mine seems to have!
    If anyone could shed any light on a solution it would be much appreciated
    Thanks,
    Alex
    Message Edited by dazz19 on 15-Feb-2009 11:43 AM

    In the end my operator agreed to replace the handset for me after a lot of to-ing and fro-ing. In my opinion the problem was caused by a faulty memory chip.
    Alex
    p.s. - the old handset was sent to the operator for repair and they were unable to repair it, only offer a refurbished replacement. With the greatest of respect, it's good to know my case is not unique!
    Message Edited by psx9 on 12-May-2009 01:10 AM

  • N95 8gb V20.0.0.16 Multimedia Key not working

    Hi, I think I found a bug!
    make sure the phone is in portrait mode:
    1. press the multimedia key
    2. press it again to exit
    3. Turn the phone to bring it to landscape mode (make sure auto rotate is enabled)
    4. press the multimedia key
    For me the menu does not start. When I switch it back to portrait, the menu still doesn't launch, so I have to restart my phone to get it working again.
    Can anyone verify this?

    Just now i read that post. But that guy(wintomato) post that on 15th of march. So it was not about v20. Because v20 just released few days before. When I used v15 nothing happened like that. Maybe it's depened on particular theme or devices. Like my camera has 2 green spot after v11. But very few pepole has these prob. Good luck
    N8,N97,N96,N86,N95 8GB,N85,5800,N79,N918GB,N82, N81, N93, N80, N73ME, N70, 6680, 6600,5320,5130,7610,7650,,SIE SX1...................

  • N95 8GB on other networks ?

    Hi, first post, hello all.
    I was wondering when it will be available to T Mobile specifically, I had the N95-1 and the battery was terrible so I sent it back.
    I waited for the k850i however when I tried the N95 I knew it was the one I wanted. So now I am nearly three months over my contract and really really want !
    Thanks

    boosha:
    The N95 8GB and the N95 Classic are very similar as far as the WIFI goes.
    I use mine all the time, mainly to download podcasts, and i find it very stable.
    o2-uk, N95 8GB
    V20.0.016, 28-02-08, RM-320, (88.01)
    Running Rotate Me 2.2 & Rock'n'Scroll & Shake SMS & ShakeLock & Flip Silent

  • N95 8GB WPA-TKIP-PAP

    Hi, I have problems connecting to my University wireless. I have the last firmware of N95 8GB (v20) and I've noticed it has the WPA opcion.
    I think the TKIP option is disabling "WPA2 only". Is it right?
    And I couln't find the PAP option. Where is that option? I need that to connect to the wireless.
    Sorry for my bad english. Thanks.

    The phones were not designed to inter grate into wireless networks on a corporate level. I don't even think PDA's support this type of authentication, and the reason being, they're not a PC, don't run the same applications as a PC there for no need for this authentication.
    The university are probably using this with a combination of Windows Domain Authentication, of which a Nokia phone is unable to achieve because it does not support the TCP/IP over Netbios and SMB that Windows/Linux/Unix/Mac PC's support.
    There also could be a licensing issue with the feature as it may be too expensive for Nokia to implement.
    Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
    Current: Nokia N900!

  • N95 8GB won't connect to EAP-TLS secured WLAN

    Hi all,
    Has anyone succeeded in connecting to EAP-TLS secured wifi network? I have an N95 8GB with the latest firmware (updated yesterday) that cannot connect to my office wlan.
    I’ve been reading this forum (and others google found) and here’s what I’ve done:
    * defined an access point with 802.1x security mode and EAP-TLS
    * exported the certificate from my IE, imported it into the phone and selected it in the Personal Certificate filed
    * selected the accompanying rootCA certificate as Authority Certificate (tried leaving it blank as well)
    * tried different Ciphers just in case
    Every connection attempt results in "EAP-TLS authentication failed" and I’m never asked for password.
    I’ve been talking to our admin (I’m afraid he’ll start to hate me before too long ) and found out that after the firmware upgrade and a couple of hours of trying this-or-that I’ve managed to have proper username sent to the server. But the message remains.
    Here’s a part of the event log forwarded to me by the admin (fully qualified username is stripped by him but it seems to be correct):
    Event Type: Warning
    Event Source: IAS
    Event Category: None
    Event ID: 2
    Client-Friendly-Name = wifi2
    NAS-Port-Type = Wireless - IEEE 802.11
    NAS-Port = 46
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server =
    Policy-Name = wifi
    Authentication-Type = EAP
    EAP-Type =
    Reason-Code = 22
    Reason = The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server
    As far as I can see my nokia cannot use a proper EAP-Type. Does anyone have a clue on what to do?
    George
    P.S. I believe we are using Radius server and a google search for the stated Reason gives a number of Radius-related results, but they describe cases when PC's cannot connect. I can connect to the wlan with my laptop with no prob (but it asks for credentials each time - don't know if it matters).

    Hi
    Even I am facing the same problem.
    However Opera 8.65 is working fine with the said configuration
    -Ramesh V

  • N95 8GB Firmware release 20.0.016

    New firmware release 20.0.016 for N95 8GB is out and installed. The fixes are, an inhansment in the browser and there is a new feature add which is a screen rotate. Congratulation guys.

    27-Apr-2008 12:24 PM
    foneguru wrote:
    That would depend on your product code, but most of the product codes now has an available update for v20.
    My product code is 0557651.
    Any idea? Thx.

  • New firmware update v20 for N95 8GB

    According to some sites the new firmware for the n95 8gb will have some good new features which will be out soon. here they are.
    Changes/improvements made from MCU SW 15.0.015 to version 20.0.016
    New features:
    • Automatic Screen Rotation (ASR)
    • Support for new combo memory added
    Browser:
    • Improvement when creating a voice call from WAP page.
    • Improvements to embedded video functionality in browser.
    • Sending email via browser flash plugin improvements.
    Messaging:
    • Mail in HTML format handling from Gmail IMAP server improved.
    Connectivity:
    • WLAN connection stability improvements
    • BT connection stability improvements with certain BT headsets
    • USB connection stability improvements
    Telephony:
    • Voice call handling improvements after certain type U.S.S.D message receiving.
    • Stability improvements to gallery for case when there s lot of content in Gallery
    • Improvements to switch application
    • Voicemail icon handling improvements
    Localization corrections:
    • Deletion of all contacts now possible even more than 6000 contacts in phonebook
    • Startup functionality improvements
    Message Edited by wah007 on 01-Apr-2008 10:24 PM

    05-Apr-2008 01:46 AM
    jericho wrote:
    So let us all hope that the sensitivity is just right or we have to wait for a new release to fix it or settle for 3rd party apps.
    So, V.20 for N95-2 isnt just an april fools joke?
    no its not a april fools joke. It is real.
    I hope it fixes the video stuttering as my phone does that too.
    Message Edited by wah007 on 05-Apr-2008 02:28 PM

  • V20 firmware for n95 8gb

    hi excuse my ignorance but what does the v20.0.016 update give you apart from crashing ngage, now sorted, cant find anything obvious.
    thanks steve...have vodafone branded n95 8gb.

    05-Apr-2008 01:46 AM
    jericho wrote:
    So let us all hope that the sensitivity is just right or we have to wait for a new release to fix it or settle for 3rd party apps.
    So, V.20 for N95-2 isnt just an april fools joke?
    no its not a april fools joke. It is real.
    I hope it fixes the video stuttering as my phone does that too.
    Message Edited by wah007 on 05-Apr-2008 02:28 PM

  • V11 to v20 whats new i can see inside my n95 8gb

    recently i upgrade my n95 8gb to get a2dp profile but after upgrading version 11 to 20 still its not working and i dont see any thing new in side. Please help. any way its shows version 20.0.016 by device mgr.

    you can find the chnagelog for the new firmware on a lot of internet websites. a comprehensive one is available here:
    http://www.nokiausers.net/Nokia-N95/N95-1-Firmware​-v20.0.015-change-log.html
    i hope that will help you see the differences.
    Fear not those who argue but those who dodge

  • Lack of firmware updates for the N95 8GB

    Does anyone know what the latest firmware is for the N95 8GB?  I've unlocked my phone from Vodafone but the updater still says the latest version is 20.0.016 but there are numerous posts talking about version 30?

    As stated in his first post he has unlocked his phone. Also there is no point even phoning Vodafone. I spent around 2 months speaking to them trying to get an update for my N96 which never came. I was then also told they were under no obligation to do it either. Only option for me was to get the vodafone branding removed, so glad I did as he phone is much quicker now.

  • N81 / N81 8GB / N95 8GB Firmware Added to NSU

    N81
    N81 8GB
    N95 8GB
    Are added to NSU so looks like dese firmware are available on the NSU.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

    This has given birth to similar issues as psykomania said.
    So quickly annoucin the upcomin products' in NSU, and remain quiet on N93,7710 (though it is dead, but its respective users arent), E65 !
    What's more

  • Nokia N95 8gb latest firmware update 21/02/13

    Hi, I have had a problem whilst updating my N95 8gb and now it appears, I think, that the  firmware version I have is an older one than I had previously, but there isn't anything newer showing as availaable. I have 35,0.001. I am sure that the last time I had a problem, after it was "flashed", the firmware I had installed by the shop was this and then when I got home and went to restore my files, there was a new update available on line. The rreason I say this is that the icons and colours etc are like the version installed by the shop, about 1 year ago and when I updated the software everything was different. If what I am saying is correct, does anyone know if this newer firmware update has now been withdrawn or can anyone throw any light on the subject as I am a little confused! Thanks

    If your N95 8GB is RM-320 the last available firmware for all product codes is v35.0.001. Using restore via Nokia Suite can only reset your individual personalisation settings.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Updated N95 8Gb from v20 to v30 but restore failed

    I updated N95 8Gb from v20 to v30 but impossible to restore
    After restore and reboot the phone is empty with no data
    What is the problem ?

    YIPPPEEEE! FINALLY.. i was able tio upgrade my n95 8gb to 31.0.015.. i dunno y thr ws soo much of fuss earlier.. all i did was js follow the simple process..
    1.backed up my files..
    2.fully charged my battery js b4 the upgrade..
    3.turned off my kaspersky(Antivirus)
    4.turned off my firewall
    5.general profile..
    n zoooooooom! it upgraded!! without any hiccups.. i js lost all my msgs.. hadnt backd up properly.. bt m content!
    u cn try the same thng.. 99% it should wrk out.. i realised that i had decreased the level of antivirus protection and my firewall was still on, earlier.. mayb dats y it was causin so many problems.. bt this time around i js "paused complete protection" from antivirus.. stopped my firewall and it upgraded... eassssssyyyyy!
    hope it works out fr u.. lemme knw!! 

  • Nokia N95 8GB When new Firmware?

    Nokia N95 8GB When new Firmware?
    Firmware Nokia N95 8GB, V 31.0.015, 07-11-08, RM-320.
    or next  V 35.0.015 or V 40.0.015 ; laiter 6 mounts
    sory for bad English , I,m in Bulgarian

    i got N95 8GB from UK 3 which had f/w 11.xxxxx
    i have upgraded to latest f/w available from Nokia 31.xxx.15 but i have to debrand it now i m curious to have latest f/w from UK 3 does UK 3 upgraded its f/w to v.31xxx or they are still stucked to v.20xxx ?

Maybe you are looking for

  • How do I turn off or reject location suggestions in Calendar?

    I usually place addresses into Calendar using the same format. Zip Code, Street Address (Name of Building or Campus) Room/Building Number. This allows me to quickly access the information I need to arrive in the right place at the right time (I am se

  • Please Help - ApplicationManager 2.0 won't install - Mac Intel OSX 10.6.8

    I've Adobe Master Suite 5.0 demo on my hard disk and would like to deinstall it the correct way. Unfortunately each and every time I attempt to deinstall any program, I receive a dialog box informing me that the Application Manager is either not pres

  • Authorization objects to open workbooks

    Hi there, which authorization objects should i asign to a role in order to open any workbook ? thx in advance.

  • Error . Copying Module Program

    Hello Friends , I am trying to copy a module program SAPMZZTES1  with screens 1000 , 1100 , 1200 , 1300 , 1400 to another module pool program SAPMZZTES2 which would be a replica of the ealier module pool program . When I go to SE51 and do copy SAPMZZ

  • Who is Who query

    Hi experts! I have a problem with the query "Who's Who' in ESS. I modified the infoset and added two additional fields. I want those fields to appear in the selection screen and appear ok but when I run the query ignores the values I put in those fie