N95 Active Standby
I have active standby on my screen
I want to remove the "WALN SCANNING OFF" below the short cut icons, how do i do this
10-Oct-200707:34 AM
shippo63 wrote:
I have active standby on my screen
I want to remove the "WALN SCANNING OFF" below the short cut icons, how do i do this
Hi shippo63
If you select Settings > General > Personalise > Standby mode - you can turn active standby off which removes all the icons from the screen.
You can also change the applications that are displayed on the screen.
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
Calendar missing from N95 Active Standby
I'm really hoping someone can shed some light on this ... I had my active standby activated on my N95, all fine. Then I turned it off recently. I went to switch it back on, and the calendar's missing! It gives me no options to be able to switch it back on! I've tried a factory reset (under Tools/Settings/General) but that hasn't helped. Tried to see if there was a Software or Firmware upgrade, but apparently my phone is all up to date. Any ideas? Anyone? (I know this seems like a weird request, as there are HEAPS of posts asking how to get rid of the calendar on active standby, but the fact I didn't change anything & it's just done it is concerning.)
Message Edited by nemnem on 04-May-2008 03:24 AMBack up all your data to your PC using PC Suite's content copier, and then shut down your phone. Hold down 3 buttons: GREEN, 3 & * while switching on your phone. Make sure don't release your fingers till the phone ask for pin. You'll lose everything that's on your phone memory, and if you restore that from a back up, you'll be back to where you started, but this seems to have worked. You'll also lose things that your network operator may have installed. But oh well. Still no idea why it happened in the first place though!
-
N95 Active Standby basic, or S60 version?...
Hi guys
I was just wondering which N95 users have the more up to date Active Standby mode (the S60 version with the icons on the left, and submenus that popout) and who has the older version?
My brother and I both have N95s, both from Phones4U and both on Orange contract - yet his has the new menu, and mine has the old one. He also has the option to switch between the 2 in his settings.
Anyone know if there is a way to get that functionality on my phone?
Many thanks
C.04-Sep-200709:59 PM
mechanimal82 wrote:
04-Sep-200703:54 PM
korngear wrote:
What bout the generic ones??
What do you mean???
The Orange Standby screen is only on Orange branded handsets. No way to get it on an unbranded generic phone.
No dude, I just meant it is only to O2.
Not for the generic ones, no need for it, too.
Just to get clarified. -
N95 Active standby applications
I set the Active standby applications and they appeared in a row in the screen
BUT
there are 3 rows of extra application that I didn't set before and I don't need them frequently. How can I make them disappear?
the applications are:
Search: Internet and My content
No calendar entries today
WLAN scanning offSorry. This is not possible. You can remove the Search option by hacking, but this is not recommended.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam ! -
N95 active standby problem w. firmware 30.0.015
I have this problem with my N95:
-I upgraded to firmware 30
-restored my backup
-each time I press the RED key it exists to standby, but the shorcuts won`t load, and the phone`s menu starts with a delay of a few secs maybe
-everything works fine until I restore my backup...
What can cause the problem?
Any suggestions...???
Solved!
Go to Solution.hmmmm. try resetting ur phone..
type *#7370# (u will loose all data on phone C Drive but not memory card)
after that restore each back up individually eg. contacts den calender den messages etc.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions! -
N95 Cell Broadcast & Active Standby not compatible
Hi - I have a N95 with V31 software and it STILL has the same problem.
2G Cell Broadcast information isnt displayed (only displayed for 1 second) when the Active Standby is on
Anyone know when this will be fixed?
Also does it do it in the N97 too?The ability to view texts/emails on the stanby screen is a feature only offered to the business E-Series phones.
I too would like this on my N95, but alas we cannot!
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button. -
N95 version 30.0.0.15 active standby screen layout
Why does 'Search: Internet and My content' in the active standby screen suddenly have to run over onto a second line in version 30.0.0.15? It didn't have to in firmware version 20.0.0.16 and it's pretty ugly...
Also, why are users who don't use or don't plan to use Share Online intensively forced to have icons for this application displayed on their active standby screen?
If these icons have to be on the active standby screen for some reason, why can they not be right-aligned instead of plopped down in the middle of nowhere?
The active standby screen layout in 30.0.0.15 is a mess.I agree. Since v12 we've lost *three* lines of precious screen real estate on the stand-by screen. I want those back, please. The standy-by screen is now used op by stuff I rarerly use less, or use from another startingpoint. It's nice to have the *option* of having those in the stand-by screen, but for me, the agenda and tasks are much more important.
And while they're at it, I also want the "follow on map"-feature back in Nokia Maps, which they've stolen from us ever since the v20-firmware!
Does your N95 hiss like a snake? -
Hi
On the N95 i want the shortcut icons in the Active standby however i don't want the lines
Search..
No calendar entry..
WLAN scanning..
can somebody inform me how to remove them?grayburn, have you found a way to modify the active standby screen?
Care to share? -
Search for other "active standby"
i have N95 8GB phone
this is my six nokia phone and i loved them all
this symbain OS have something that really annoying me
* the "active standby" has no Editing option except the changing of the shortcuts (that i never used anyway)
i mean that i cant change the location and the content of the window of the active standby. (like on Nokia6233) (S40 OS)
* all the previous nokia phone that i have, the "active standby" was activated by the up arrow key, - and now in that symbian it used all the 4 direction key to activated. - i used to use the other 3 for messaging, or looking the diary.
* i usually used the active standby to indicate what calender schedule i have to do, and in that OS it show only appointment, and don't show normal task scheduling.
if someone can help me set this settings over the phone OR
suggest me another application (3rd party) like the "active standby"
but with an option of editing the setting of the content???Yes, there are a bunch of people out there...
I guess nobody replied, because there is no way to change the active standby in S60 models and there is no 3rd party application to replace it.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good. -
ASA 5520 VPN load balancing with Active/Standby failover on 2 devices only...
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
This topic has been beat to death, but I did not see a real answer. Here is configuration:
1) 2 x ASA 5520, running 8.2
2) Both ASA are in same outside and inside interface broadcast domains – common Ethernet on interfaces
3) Both ASA are running single context but are active/standby failovers of each other. There are no more ASA’s in the equation. Just these 2. NOTE: this is not a Active/Active failover configuration. This is simply a 1-context active/standby configuration.
4) I want to share VPN load among two devices and retain active/standby failover functionality. Can I use VPN load balancing feature?
This sounds trivial, but I cannot find a clear answer (without testing this); and many people are confusing the issue. Here are some examples of confusion. These do not apply to my scenario.
Active/Active failover is understood to mean only two ASA running multi-contexts. Context 1 is active on ASA1 Context 2 is active on ASA2. They are sharing failover information. Active/Active does not mean two independently configured ASA devices, which do not share failover communication, but do VPN load balancing. It is clear that this latter scenario will work and that both ASA are active, but they are not in the Active/Active configuration definition. Some people are calling VPN load balancing on two unique ASA’s “active/active”, but it is not
The other confusing thing I have seen is that VPN config guide for VPN load balancing mentions configuring separate IP address pools on the VPN devices, so that clients on ASA1 do not have IP address overlap with clients on ASA2. When you configure ip address pool on active ASA1, this gets replicated to standby ASA2. In other words, you cannot have two unique IP address pools on a ASA Active/Standby cluster. I guess I could draw addresses from external DHCP server, and then do some kind of routing. Perhaps this will work?
In any case, any experts out there that can answer question? TIA!Wow, some good info posted here (both questions and some answers). I'm in a similar situation with a couple of vpn load-balanced pairs... my goal was to get active-standby failover up and running in each pair- then I ran into this thread and saw the first post about the unique IP addr pools (and obviously we can't have unique pools in an active-standby failover rig where the complete config is replicated). So it would seem that these two features are indeed mutually exclusive. Real nice initial post to call this out.
Now I'm wondering if the ASA could actually handle a single addr pool in an active-standby fo rig- *if* the code supported the exchange of addr pool status between the fo members (so they each would know what addrs have been farmed out from this single pool)? Can I get some feedback from folks on this? If this is viable, then I suppose we could submit a feature request to Cisco... not that this would necessarily be supported anytime soon, but it might be worth a try. And I'm also assuming we might need a vip on the inside int as well (not just on the outside), to properly flip the traffic on both sides if the failover occurs (note we're not currently doing this).
Finally, if a member fails in a std load-balanced vpn pair (w/o fo disabled), the remaining member must take over traffic hitting the vip addr (full time)... can someone tell me how this works? And when this pair is working normally (with both members up), do the two systems coordinate who owns the vip at any time to load-balance the traffic? Is this basically how their load-balancing scheme works?
Anyway, pretty cool thread... would really appreciate it if folks could give some feedback on some of the above.
Thanks much,
Mike -
FWSM Active/Standby in VSS mode
hello,
i do have two 6500 in VSS mode , and one FWSM module on each 6500, i want to configure these modules as Active/Standby, how do i start , should i follow this (not in VSS mode):
http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/fail_f.html
or are there other things should i do to make it work,
thanksup!
-
N81 How to Show calender at active standby
Hi, i just bought a N81, but i just cant seem to get the phone to show the calender details for the day at the active standby mode(the main page). I can do it previously on my 6280.
Anyone can help?12-Jun-2008 11:42 AM
psychomania wrote:
Pass, it reads to me like they want to change the active standby shortcuts and can't find which application to use in the phone.
It reads like that to me too.
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers -
11.2.0.3 RAC ASM Pri with Normal FileSys Active Standby Post Failover
The architecture consist of two node rac asm primary and one normal filesystem active standby all on Oracle 11gR2 11.2.0.3. With basic Broker Configuration.
Performed a managed broker switchover and not the Normal Filesystem has the primary role and the standby consist of the two node asm rac. I want to switchback, i.e., Former Primary -> Primary Role and Former Standby -> Standby Role.
However my broker contains the following:
DGMGRL> show configuration verbose;
Configuration - DG_PRI_CFG
Protection Mode: MaxPerformance
Databases:
STANDBY - Primary database
Warning: ORA-16829: fast-start failover configuration is lagging
KEMETRAC - (*) Physical standby database
Error: ORA-16810: multiple errors or warnings detected for the database
(*) Fast-Start Failover target
Properties:
FastStartFailoverThreshold = '95'
OperationTimeout = '30'
FastStartFailoverLagLimit = '95'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: ENABLED
Threshold: 95 seconds
Target: KEMETRAC
Observer: emcc.respecti.com
Lag Limit: 95 seconds
Shutdown Primary: TRUE
Auto-reinstate: TRUE
Configuration Status:
ERROR
I've found a recommendation to increase the value of FastStartFailoverThreshold='90';
Though I continue to encounter the above configuration error.
Recommendations are appreciated!
Edited by: 783527 on Mar 12, 2012 7:41 PM03/13/2012 13:13:22
Data Guard Broker Status Summary:
Type Name Severity Status
Configuration DG_PRI_CFG Warning ORA-16607
Primary Database STANDBY Warning ORA-16829
Physical Standby Database KEMETRAC Error ORA-16810
03/13/2012 13:14:22
Data Guard Broker Status Summary:
Type Name Severity Status
Configuration DG_PRI_CFG Warning ORA-16607
Primary Database STANDBY Warning ORA-16829
Physical Standby Database KEMETRAC Error ORA-16810
03/13/2012 13:15:22
Data Guard Broker Status Summary:
Type Name Severity Status
Configuration DG_PRI_CFG Warning ORA-16607
Primary Database STANDBY Warning ORA-16829
Physical Standby Database KEMETRAC Error ORA-16810
03/13/2012 13:16:22
Data Guard Broker Status Summary:
Type Name Severity Status
Configuration DG_PRI_CFG Warning ORA-16607
Primary Database STANDBY Warning ORA-16829
Physical Standby Database KEMETRAC Error ORA-16810
03/13/2012 13:17:22
Data Guard Broker Status Summary:
Type Name Severity Status
Configuration DG_PRI_CFG Warning ORA-16607
Primary Database STANDBY Warning ORA-16829
Physical Standby Database KEMETRAC Error ORA-16810
03/13/2012 13:18:22 -
Plug-ins for Active Standby on Nokia 6110 Navigato...
Is there any way to get other active standby screen plugins on the Nokia 6110 Navigator? I have callender but I'd also like Bluetooth, messages etc. I have a Voda UK branded one.
Good paulrouy - what a team - can you play sweeper
Today Me Tomorrow You -
ASA 8.2 8.4 9.1 possible with no downtime as we run active/standby?
Hello,
We have 2 x ASA 5520s (with 2GB mem) in active/standby mode, they also include the IPS modules.
The current firmware is 8.2 and I was wondering if it is possible to upgrade these firewalls with no downtimes? In the past I have upgraded the standby ASA, rebooted it and then made it the active ASA then upgraded the new standby ASA.
I have have quite a lot of NAT Exempts (No-NATs?) and a few static NATs, how did you approach this during your upgrades?
I guess I can roll back as the 8.2 firmware will still be on the flash and I will have the config?
ThanksYeah it's supported:
Release Notes for the Cisco ASA Series, 9.1(x)
http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html#wp732442
This document has the information that you need; it talks about the requirements and zero downtime procedure.
But you need to take a lot of considerations that you can reference in the document:
https://supportforums.cisco.com/docs/DOC-12690
If you don't mind me asking why are you upgrading?
Because of a fix or feature?
Maybe you are looking for
-
AP Extreme only letting on one computer at a time
My wife recently got a MacBook instead of her old HP laptop, and we got the AP Extreme base station so we could share our laser printer. However, I have yet to be able to have both computers on the network at once. If one is online, the other one can
-
When updating my ipod I as prompted got message on my laptop----Runtime Error Prog: C:\Prog Files\iTunes.exe R6034 An applicationhas made an attempt to load the C Runtime Library incorrectly. Please contact support. Error 7(Windowserror 1114)
-
How do I download Adobe Reader 9 in Firefox? Their instructions say to begin by clicking on the 'Edit Options' button on the yellow bar at the top. I have no such bar or button on my Firefox start page. == This happened == Just once or twice == About
-
Ways to trigger a BPEL process
Hi, How many ways we can trigger a BPEL Process in 11g? Thanks, kpr Edited by: 975937 on Mar 11, 2013 10:26 AM
-
Display version number in list, browse
Hi, would someone know if there is a way to display the version number of a versionned document in the list, browse and detail displays. Thanks