N95 After Firmwear update

I updayed my n95 today and now after reinstalling all info when you turn on side to activate Mulit media it only loads the normal screen for phone only way to load Multi Media is press button wont load automaticly

I was finally able to make mine work by changing automatic to channel 11

Similar Messages

New keypress bug in N95 after v12 update + other b...

Update v12 has rendered the whole phone practically useless. It misses keypresses - that is what is well known in this firmware, BUT the major pain in the **bleep** is that the end-call button doubles as a 9 on keypad and vice versa.
I cannot press n.9 on keypad cause it automatically closes the application (like sms editor) when pressed.
I can not dial numbers containing n. 9 , can not text messages etc...
Thanks nokia for this fw - really!
Did I mention that it also loses the microphone of my stannard handsfree (wired).
It also boots about 3-6 times a day.
Only thing that's improved an works (kinda cos' i can't type street names) is the gps.

This is really starting to bug me!
I tried to fix the odd behaviour via hard reset (green + 3 + *) the result being:
Cannot restore backup from sdcard - all of my contacts, messages are gone 4 good!
It just hangs up and reboots if i try to restore backup.
This is just splendit!
*bleeb* *bleeb* FFing *bleeb*

WLAN not working after v30 update on N95

I saw a previous thread about WLAN not working on the N96 after update.
I can now confirm that WLAN is also bugged for the N95-1 after firmware update to v30.
It tries connecting, then after a few seconds, I always get the message "WLAN: Unable to connect. WLAN network not found"
This did not happen a few minutes before the update. Last firmware version was the v22 (latest one before v30)
Has any fix been found? My main usage for my phone is for the wifi, and without it I can't do much

Nokia is the host of this forum, however the forum operates and functions with the participation of common folk, users from all over the world that either share passion for Nokia or are looking for support and answers from other community members...if you want to complain to Nokia there is a : Contact us - button on top right of this page...if you want to try to find answers patience sometimes is a virtue....now the issue of untrusted software, there are applications and sometimes themes that you have installed on your memory card/mass memory that will give that message when you go to application manager it will list the apps that are installed and that are not installed on your device, you can either install them manually or remove them from your phone, the next time you restart your phone you should have no problems with those messages. now the WLAN issue i am not sure about and I am almost certain it has nothing to do with your untrasted software messages.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

N95 media Keys not lighting up after v2 update

Hi Folks
i just updated my phone last night to the latest firmware and what made me pleased the most was it sorted out the problems between the phone and my intergrated Bluetooth kit in my 2007 Ford Focus, nokia tried to blame ford even though its their module in the car!
anyway i have noticed that after this update when you move the slider to expose the media keys and turn the phone into a media player it doesnt automatically bring up the multimedia menu, great i thought! as the phone is in my pocket a lot it goes off whenever it gets slid down now it wont happen.
more worringley is that the media keys dont light up anymore! not when you move the slider or when you press them or open any program that uses them, its pretty annoying actually and they were working before the update, anyone had similar problems?

regarding the 8GB version, mine is silver but came with a 8GB memory card from o2 UK would that not make it the 8GB version?
No,i have exact same phone as you,N95-1 with 8gb memcard but the firmware is way behind.N95 8GB has V20.0.015 as standard fw
for lighta isue,check in tools,settings,general,personalisation,,display,and look where theslider is for the light sensor,,if its low tweak it up a bit...keypad lights only work when light sensor detects a little light,so at midday,lights wont light up anyway,dont need to..energy saving i guess...check these and get back to me m8
N91
N95-1
RM-159
12.0.013
8Gb microSd card

N95 Keyboard problem after firmware update.

I have a N95 I recently updated it to 20.0.015. My phone now keeps crashing and the keypad stops working for about 15 mins or reboots I am trying to find out whats wrong but I cant really what happens is the Music application opens up randomly and freezes my phone as well as that, The keyboard stops working even after a reboot. I have to remove the battery for 15 minutes and then it starts to work for a few minutes and does it again. Does anyone have any Ideas? or any suggestions? Also the carphone warehouse wont repair my nokia under warranty as my receipt is from Paypal. the phone hasn't even been out a year. Is there anything I can do ? Thanks.

I don't know if we will ever know that due to the fact that last time the author of this thread visited here, was early 2008...
If you have the same issues, I would try to connect the phone to pc and check if you could be able to connect to pc suite or ovi suite to make a back up of contacts etc, and then perform a hard reset like Scoobyman has suggested, or if you don't care about saving it, go a head with the hard reset.
If you are able to, you could try to reinstall the FW...

The eFax firmwear Update Messed Up the Wireless Connection

I followed the directions to reconnect eFax on my HP Photosmart 7510, installing the firmwear update. Unfortunately the update disconnected the printer from the wireless connection and I was unable to reconnect it.
I contacted HP support by phone at approximately 5:45 p.m. The first person I talked to was able to get the wireless working again by taking over my computer and reinstalling the softwear. Unfortunately, the softwear he installed does not resolve the eFax problem. So I was back to square one. He transfered my call to a different support rep who after considerable time was not able to get eFax to work. She "escalated" my case and I am supposed to hear back from HP in seven working days. I just got off the phone with HP support at 8:30 p.m. Not bad three hours of support and I still don't have a working eFax.

Hi @josborne3,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details. If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/t...
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Performance reduced under Bootcamp after EFI update on Macbook Pro Retina

after i upgraded EFI on my retina macbook pro the proformence reduced to unusable. under heavy load under bootcamp windows7. the cpu clock drops and as well as cpu clock. this is the screen shot of gpu clock monitoring from windows u can see the gpu clock is running at 270Mhz at most of the time and trying to be back to 725Mhz(yea, not 900Mhz!) when im running a graphic benchmark at same time cpu will run about 1.1Ghz as well. i noticed that it will run 10-20sec normally then CPU and GPU clock will start dropping. It's almost like speedstep is programmed backwards. My CPU is constantly running at 3.1-3.2GHz, and then as soon as a game loads, it drops to 1.2GHz. I've lost track of how many times I reset the SMC reseting SMC PRAM, reinstalling windows using Bootcamp or even erease the entire drive and start over from network recovery MacOS did not solve this problem. so all the recent games like COD MW3, Starcraft II, BF3,or D3 will only run about about 10 fps as i was playing them with no ploblem before the EFI update.
this is killing me! please help.
im in NY, in this season i dont think is the overheating problem. when i check the temperature, it stays about 80C (fans will run about 4k rpm). but some time heavy loaded Mac OS cpu is about 90 degree but only with 3k rpm fan kicked in.
i did search online, seems that some other people have the same problem with rMBP or MBA 2012.
anyone knows if i take my macbook pro to the store, will those people work at genuines bar help me with this "windows" problem?
thanks!

Hey Shadowyani, please take a time and fill a bug report at http://developer.apple.com/bugreporter/ . The machine is useless for me as it is now because I develop and use very GPU/CPU demanding scientific applications, after the update my realtime applications are completely useless as they drop from something like 25fps to 9 fps even on Mac OS X (no SMC reset fixed the issue). In bootcamp the situation is worse, my software runs at 4 fps and gaming turns to be impossible to play as well.
Please let Apple know about the problem, fill a bug report, even if SMC reset once in a while fixed the issue for you (this is not a common behaviour and must be fixed). We paid the price for cutting edge technology.
Apple shall not do a downgrade of the system after few weeks, remember that most of reviews and benchmarks were done BEFORE the EFI Update, so people are being fooled by Apple in this sense.

My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

Basics from the manual are restart, reset, restore.
Try those

Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

Hello,
I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
Your help is sincerely appreciated. Thanks.

Good news!
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Adobe Application Manager CC not working after last update

Last night I avrived home and sat down to work on my website and other side projects after a long day at work. I opened my application manager and it notified me that it had an update. So naturally I agreed and was excited to see the new upgrade. Sadly after a couple hours of trying to figure things out on to why I wasn't able to access my Adobe Muse and Adobe Application manager after the update I had to give up. I was online with tech support about the issue and was given a link to download the application manager yet again (this would have been my 3rd attempt to do so, and the link that was given to me was outdated). After finding out that this was going to take longer than I had hoped asked if the teck support could help me resolve the Muse issue. I was told that I'd be transfered to the Muse support and never was after an hour or so.
I'm now still stuck not being able to use muse (after a couple re-installs) and not able to use my application manager.
Currently when I lunch my application manager my backgound decktop goes black and the application manager pops up and is white with no options to choose and shows nothing. When I try to use Muse it askes me to log in, and then gives me an error message asking me to please try again later....
Can anyone help, has anyone had this issue before??
(running on a 64bit system, windows 8, Adobe CC Member)

Hi LantzDesign,
Could you please follow this step and let me know if it helps.
Rename the OOBE Folder to OOBE.old from this location and relaunch Creative Cloud.
C:\Users\(your Username)\AppData\Local\Adobe
Regards,
Abhijit

Unable to Log In After Software Update

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

HP ePrint iOS app no longer finds Photosmart C4780 after app update

I have an HP Photosmart C4780 connected through WiFi to my network but sadly it's not supported by AirPrint on iDevices.
So, I was using HP ePrint Home & Biz iOS app (version 4.1) which was very useful for me as it found the printer and allowed me to print from my iPad/iPhone.
Today I updated the app on my iPhone to version 5 (now simply named "HP ePrint" on the App Store) and after the update, the new version doesn't find my Photosmart C4780 anymore. I did the Activation thing on the iPhone, as it was requested to refresh the list of printer on my network in the All tab, but after Refresh no printer is found.
Still I have the old 4.1 on my iPad (and hopefully in my iTunes library) and the printer is located, I assume, through mDSN as it shows the name specified for this setting.
So, question is: Did you dropped support for Photosmart C4780 on 5.0 release of HP ePrint iOS app? If so, why did't you informed this appropriately on the app update text description in the App Store? A message like "some printers may not be supported anymore" would have been helpul.
If HP ePrint should find Photosmart C4700 series printers and this is an issue, how should we proceed from here?
Thanks.

WilliamBPS,
I was not informed that support was removed from the app for certain printers. It may have been lost in the transition to the new updated app. I will deffinitly pass this information along as it is very important that the app supports as many printers as it can. I'll go ahead and take note of your printer model. If I find anything out about this, I'll try to give you an update in this thread.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IPhone remote app no longer working after iPhone update to version 4.2.1

I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
"Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
Home sharing is enabled on all the Apple TV devices
I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
Suggestions ?

Update:
Issue is still occuring, after resetting wireless router.
Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

Music will not play after ios5 update, it still appears there but will not play...if I select a song, it jumps to another song but will not play anything. Also, if I try to play any of the files on the phone from iTunes they won't play either...help!!

No fix for getting music to play on iphone4 after ios5 update...
Cannot find how to manually sync according to someone else's fix...
If I try to play any of the songs already on the phone from the iTunes software, they don't play either...
FRUSTRATING!!! Please help!!!

Hopefully Apple is trying to clean up this mess of an opperating system

N95 After Firmwear update

Similar Messages

Maybe you are looking for