N95 and SE HCB-30 BT hands free

I can get my N95 to pair with SE HCB-30 BT hands-free car kit; N95 recognises car kit as an audio device and I have set N95 default enhancment as hands free. However, though keyboard tones cause radio to mute and correctly sound through car kit, incoming ring tones and voice calls do not. Any suggestions?

now i have the indian call centre, i am on hold yet again, listening to swan lake, and i want to vomit, scream and shout

Similar Messages

  • N95 used with new Honda CRV Hands Free Kit

    I'm using a N95 with Honda's built in Hands Free Voice Activated Bluetooth kit.
    I've paired the phone with the car & everything works fine. When I press the call button on the stearing wheel & say the voice tag that I have recorded on the cars system the call is made through the car kit.
    The problem is that you can only store a measly 50 voice tags on the car's system, which is not much use for business users, so other numbers have to be dialed from the phone it's self.
    When you dial a number on the phone & press send it doesn't connect with the car kit & the call stays with the phone. I've discovered that once the call is answered you can select options on the phone & transfer the call to the blue tooth kit, but by the time you've managed that (& it doesn't always work first time !), half the people you've rang have put the phone down !
    Am I missing something really silly here ?
    How do I get the call when initiated from the phone to go through the car's system without having to press buttons.
    I'd be very grateful if anyone has any ideas as the Honda garage & Honda themselves haven't !

    Hi
    Your "work around" is the only solution I've been able to come up with as well - as you say - hardly hands free, but the only way you can get it to make a call that isn't in the cars 50x misely voice tag memory.
    Have you noticed also that when you first start the car, it hardly ever understands your first voice comand ? It's as if the car has to load the software before it can work. It's the same with voice commands for the audio, climate control & sat nav - I think the woman behind the dash board falls asleep & has to be woke up every time you set off !!! Once you've used it once she is back up to speed till you switch off & re-start the engine.
    With regard to the noise levels in the car & people not hearing you above 40 mph I have exactly the same problem, my garage have changed the mic on my car kit & it made no difference at all !!! I also had a modification made to the wing mirrors to cut down the wind noise (have you had this done ?) but every day someone tells me I sound as if I'm speaking from the bottom of a pit !!!
    Other car kits I've had over the years have worked fine with good clarity both ways & cost a lot less.
    It could be such a good system with just a few tweeks !!

  • HT4623 I just got my new iPhone 4 and wish to use my hands-free in my 2006 Prius.  How do I set this up using the phone

    Well I just got a new iPhone 4 and wish to use my Toyota Prius Hands-Free capabilities with the new phone in my 2006 Prius.
    I tried setting up in the car but it says to enter pass key on the phone; which I can't figure out how to do as it gives me a key pad but
    the only button is the "Call" button???

    You must unlock your phone by entering its passcode (if any), then go to Settings/Bluetooth. In the car you must enable Pairing mode (check the manual for the car). When the two see each other you may have to enter a pairing passcode, but this should be displayed in the car. For most hands-free pairing the passcode will be "0000", but you should check the car's manual.

  • Having trouble using my 9720 connecting to car hands free kit

    Hi, i am utterly frustrated with my company blackberry 9720 phone. The trouble i am having is with the car hands free kit, my skoda superb uses the bluetooth premium and cannot use the normal hands free setting like with my Iphone. The problem i am having is firstly connecting, i can only use the bluetooth premuim, which completly changes all the setting on the phone i.e turns the network off on the phone and then a screen pops up saying running SAP mode (must use an ittenna in car?), which in turn stops emails from coming in, i can stupidly write texts messages on my dash board and receive them and read them on my dash board while driving. So when i remove the keys from the ignition the phone does not put the phone back to its normal working settings, it keeps the network switched off i have to go to settings and turn the network on. Thirdly when i turn the car on the phone will not connect automatically it says cannot connect to mobile, but if i switch the phone off and on it automatically connects, but if by the grace of god it does connect an second time the phone crashes and resets and then connects five minutes later after reseting. forthly this is not an phone issue it is definatly software as i have been given an second 9720 and the fault is present on both phones.
    can anyone help

    as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

  • 6230i connectivity with Honda Bluetooth hands free

    I am having trouble maintaining the connection between the Nokia 6230i and the Honda CRV Bluetooth Hands-free system.
    I have paired the two and connected them. All works fine. I can also use voice activated.
    But if I switch off the Honda or the Nokia and then switch on again, the devices do not connect. The Honda system flashes the blue light and every so often beeps 3 times. I can reconnect manually, but I thought that once the devices were paired they would connect automatically.
    Anyone got any advice?

    I used a 6230i on an Accord with Sat Nav, and apart from the occasional problem, it worked fine. Now got a 6700 Classic and it will pair OK with the car, but sometimes works with the Honda HFT and sometimes doesn't.
    Common fault is disconnecting when other phone answers when dialling from the car, and incoming calls cause the phone to disconnect from the HFT.
    There is a website www.hondahandsfree.com where you can check phone compatibility.
    I'm hoping a software fix will happen soon.

  • E51 will not pair with car radio hands free

    With the radio switched on I do a search and the phone finds the hands free (KCA-BT200) Kenwood headset.
    I have tried to pair the phone with the hands free and comes back with a message Unable to pair with KCA-BT200.
    This was not a problem with my previous phone HTC touch Pro.
    How do I get the devices to pair?
    An observation that may be significant is that the search shows the hands free device name and a speaker with a music note attached.

    Hi
    Check to see if the e51 is working with other devices.  If it is then it will be that the Kenwood device thats causing the issue.
    It may be that the Kenwood device is full of pairings, if it is, it will not allow you add anymore devices.  Perform a full factory reset and see if this does the trick.
    Hope this helps
    Nokia Accredited Car Kit Engineer
    e:[email protected]
    www.inekar.com Please Kudos me if you think I help!

  • Mitsubishi Fuse Hands Free System

    I recently bought a Mitsubishi Lancer and upgraded to the Fuse Hands Free package as the sales person told me that it worked great with iPhone. When attempting to connect my iPhone 4 (as well as previously with a 3GS) to the hands free system through the USB port, the display continuously cycles between 'connect' and 'retry' but never connects. When attempting to play anything, the system tells me that there are 'no playable files on the device' even though there are. The USB charges the phone and I can play music via bluetooth (although not as efficiently) but it will not connect via USB and I can't use the voice controls. I have done everything I can think of: reset the phone while plugged in to the USB, reset while not plugged in, manually switch audio settings on the phone and update to iOS 4.3 all to no avail. I've spoken to Apple regarding this and I was told that it is not an Apple issue and the people from Mitsubishi have no idea what I'm talking about. Anyone else have this issue and able to come across a solution?

    I just got back from my dealer...bottom line, update works.  It was a $99 charge, they ran into some issues, it was their first try at it.  I brought a 2 GB usb stick with me, one I had lyling around, formated it, and let them use it.  They said they could not give it back, since it would have their data on it...no big deal.  Turns out, there was an issue with the USB stick I gave them, they had to go out and purchase on (not sure why they didn't have one on hand alread).  I have about 8900 songs on my iPod, a few playlists.  It took about 20 minutes or so to finish the loading, then when you try to use some voice commands, says you cannot do it while it's compiling songs or something to that effect.  A few minuts, later, the voice commands worked. Only issue I see is that everytime I turn off the car, and get back in, it goes through the process of the load again.  the 2nd time was a little quicker, but still took about 5-10 minutes, and again, had the delay of not being able to use the voice.  Good luck everyone!!!

  • Intermittent volume on hands free with Big Button ...

    My in-laws have a Big Button 100 phone where the speech comes and goes and breaks up, when on hands free. This is both for the caller end and the receiver end.I have checked the batteries and BT have checked the line, both of which are Ok. It seems OK using the handset.
    Any ideas what to do next ?
    Chris

    Hi Chris,
    Thanks for posting. The Big Button 100  loudspeaker has 5 volume levels. The default setting is 3. The handset has five volume levels to adjust the incoming voice and three volume levels to adjust the outgoing voice, the default setting is minimum. It sounds as though your phone is possibly faulty as the volume changes intermittently. How long have you had the phone? If it’s still under warranty you might want to try getting a replacement. If it’s out of warranty there is a helpline number on page 22 of the Userguide . Let us know how you get on.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • N95 and Toyota Bluetooth hands-free system

    On 11th March I purchased a used (55 plate) Toyota Corolla Verso and as part of the deal had the Toyota Bluetooth hands-free system installed.
    Everything worked fine with my Sony K600i which has eventually given up the ghost and required replacement.
    I opted for the Nokia N95 and after a short wait due to stock availability it was delivered to my home address on Friday 4th May.
    My initial "very impressed" thoughts soon changed to disappointment when I tried to pair the N95 with the Toyota hands-free system...
    Unlike the Sony, the phone does not automatically detect that the Toyota system is searching for it.. but I can bypass this by manually searching for other devices with the phone whilst the Toyota system is searching.
    I'm then asked to input the pass code (default 1234) on the phone... which I do... and the Toyota system announces that the pairing has been successfull... connection in progress... however the phone then flashes a message stating that it is not possible to pair with the Toyota system at which point the Toyota system declares "connection failed".
    I've tried numerous times now with Remote Sim on and off, deleting all paired devices and starting from scratch etc etc...
    I've been and spoken to the Toyota Dealership and of course they claim that there's nothing wrong with the car kit - it worked with the phone I had when I bought the car and it's not their fault I've changed to a phone which is incompatible.
    As far as I can tell, the N95 has Bluetooth 2.0 installed (so did the Sony) and I understand that this *is* backwardly compatible and as such should meet the technical requirements of the Toyota System... however the lady on the service desk at the Toyota Dealership stated that there could be other issues too, but was either not able or not willing to specify what those issues would be. She suggested that the only way they would possibly be able to do anything about it would be only if Customer Relations gave them authorisation to do so and gave me their telephone number (01737 363633).
    Having spoken to Toyota Customer Relations, they simply infer that it's my fault for purchasing a phone that is not compatible - but even they declined to provide me with documentary evidence (which they claim to have) proving that it is not compatible. Instead they suggested that the only course of action I would possibly have would be to speak with the dealership.... who have of course already told me that they are not able to do anything without the say so of Toyota Customer Relations.
    I get the feeling someone isn't quite telling the truth...
    I figure that the only way I'm going to have any recourse with Toyota is to prove beyond doubt that the phone is compatible with the requirements of the Toyota system... according to the Toyota Bluetooth hands-free system owners manual I merely need to ensure that any desired phone supports Bluetooth hands-free profiel 0.96 or 1.0.
    I've tried asking O2 - they didn't know the answer and suggested I should call Nokia.
    I've called Nokia on the following numbers:
    08450 545454
    08700 555777
    09067 547540 (premium rate £0.75 per minute)
    08706 092832
    08450 045555
    Each without success... note that the 08706 092832 number was answered by an extremely unhelpful, arrogant lady... you can probably sense I'm beginning to get a little irate now...
    I've also tried to call Nokia on 08450 045555 given to me both by the Nokia website and the arrogant lady I refer to above...
    At the time of writing this post, I've had the phone to my ear ringing away for 1 hour 16 minutes and counting....
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10.... (Me catching my breath so as to stay calm)
    Can anybody whatsoever with the slightest element of confidence tell me whether the Nokia N95 supports Bluetooth hands-free profile 0.96 or 1.0??
    Any advice, assistance, stress and frustration relief would VERY much appreciated.
    Regards
    D.Burns-Keane

    Hello again... I thought some of you may like to know that I have made some progress.
    After a rediculously long time on hold with Nokia I eventually opted to hang up and call back... frustratingly I did of course get through straight away only to be told that it was actually one of their quieter days and that there was no reason (as far as the guy knew) why I should have been on hold for so long... regardless... the guy was extremely helpful.
    I explained my issue in detail and he advised that as far as he knew, because the phone has Bluetooth version 2, it could/would/should be compatible.
    Separately I had also emailed Club Nokia with the full details of my issue.
    I had also logged an appeal with Toyota Customer Services (Head Office).
    Initially Toyota's response was that technology moves so fast, specifically the mobile phone industry, that technology such as car kits etc are often left inferior. As polite as they were, they basically washed their hands of the problem putting the blame squarely at my feet for purchasing a phone that in their opinion was incompatible.
    My appeals regarding viewing it as unreasonable that having only bought the car in March of this year and one part of it already being relegated to a fancy dashboard accessory that doesn't really do much apart from ignore my requests to pair with my phone, fell on deaf ears to say the least. Even though I had directed them towards this and at least one other online forum upon which other Toyota owners claimed to have had their Bluetooth system upgraded under warranty.
    Then an email reply arrived from Club Nokia. It specifically stated, "this handset [Nokia N95] has a bluetooth version of 2.0 and does support the headset profile"
    Of course, this prompted an immediate phone call to Toyota Customer Services again... quoting my reference number (for my earlier conversation(s) with them) and informing them of the information/clarification received from Club Nokia their tone shifted a little and I was told that they would call me back.
    A couple of days later I received a phone call from Customer Services informing me that they had authorised my local dealer to upgrade the Bluetooth system under warranty.
    Approximately two days later I had a phone call from the Dealer informing me that the part(s) had been ordered.
    And as I sit here typing this right now, they're fitting the new system to my car.
    Granted I think there's a chance both the guy I spoke to at Nokia and the emailed response from Club Nokia miss the point slightly as they appear to be relying on the fact that the phone has Bluetooth V2.0 and therefore *is* compatible... this may not necessarily be the case - somebody suggested in an earlier post that the phone is only compatible with handsfree profile 1.5...
    However, if Nokia are telling me it's compatible I figured I'd quote that to Toyota and see what happened (afterall I'm not telling porkies, I'm simply passing on the info I obtained from the people who *should* know)...
    I think this proves a little persistance certainly goes a long way!
    (I guess I just need to test the damn thing when I get my car back later today)

  • N95 Hands Free with Tom Tom 710 and 720

    I am very suprised to find that my N95 is not compatable with these devices.
    The 'phone does pair with the 710 but continually every couple of minutes disconnects and asks for the default password (0000) again. I have set the 'phone to accept the Tom Tom device as "authorised" but it still asks for the password again.
    When I try to upload the 'phone connections memory the Tom Tom says "This facility is not avialable"
    I wonder if anybody else has had this problem and has discovered a solution?
    Tom Tom just say they have not tested the Nokia 95 yet....not helpful!!!

    Hi, I bought my father a TOM TOM GO 720 for father days and we want to use the N95 for hands free with BT in the car. I can pair it and pass the contacts to it, but nothing works...keeps going around in circles asking for "xxxx" and says the function is not available on the TOM TOM...I have tried everything except updating HW SW...As the last time I updated the FW we lost all the contacts and setting.....
    Please help if you can. Thanks J

  • I can no longer get my i phone 4 to pair with my autos hand free. the blue tooth on the phone is on and so is the sinc. thanks, cliff

    i can no longer get my i phone to pair with my autos hands free. the blue tooth indicates it is on on my phone and the sinc is also on but neither auto can find a blue tooth device. any help will be appreciated. cliff

    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

  • I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

    I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

    mono 8 bit 8k is 64kbps, yes. 8 bits times 8,000 = 64,000 = 64k bits/sec.
    And yes I think that's a typo - there's no such thing as 'Mone' that I've ever heard of...
    But you might want to check to find out if this is a mu-law non-linear format, possibly - there are several ways that 8 bit 8k wav files can be encoded, and typically phone systems don't use linear ones. If you have a log-in to Zultys' user-base system they have an FAQ there, I believe - the answer might be in that, and it won't cost $500.

  • When signing into icloud on a second hand ipad2 i bought with my apple Id, it would let me and states the maximimum number of free accounts have been activated on this ipad.

    Hey
    When signing into icloud with my apple Id on a second hand Ipad 2 i bought it won't let me and states 'The maxium number of free accounts have been activated on this ipad. How do i sign into icloud then? Help

    Welcome to the Apple Community.
    Make sure you are using the sign in option and not trying to create a new one. If you need to create a new ID...
    Unfortunately once all the 3 iCloud accounts have been created on your device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another iOS device or Mac computer.

  • Muffled speaker for hands free and music

    I'm having problems with my iPhone 4S speakers. Music sounds muffled and my hands free function can't be heard. Callers complain they can't hear me. Has anyone else experienced this?

    Yes the iPhone4 is listed for my model as equiped.  It does not have all the functionality such as uploading contacts but the hands free should work.  My Subaru service depart verified there was no software update listed for my navigation system for using the iPhone4.  A quick google of iPhone and bluetooth returns a significant number of message threads.  That includes a thread on the Apple forums that is now up to 44 pages.  It is not an isolated issue with just Subaru. 
    I made an appointment at an Apple store today and after describing the problem they replaced the phone a second time.  So far during one phone call there were no issues.  I have yet to restore a backup so I don't have any contacts or applications on it yet.  I will try it for about a while to see if the problem occurs again.  If there are no issues I might try loading stuff back on it progressively to determine if it might be a software issue.  I shouldn't be dealing with this mess.  It is a serious pain in the *** and I have better things to do with my time.  If I knew before hand I have this kind of problem I wouldn't be using a mobile phone with an apple on it.

Maybe you are looking for

  • How to resolve variable at runtime in java

    I have problem in resolving variable at runtime. The value of hdstr is getting added into the v1 vector element whereas it should get resolve at runtime and value should get added into the vector. 0===>(String)vector[0].get(i),(String)vector[1].get(i

  • Change ReplyTo in WS-Addressing Header

    Hi, i have created an async webservice with JAX-WS and i want to consume this by using BPEL. All works fine with correlationSet. But in the SOAP-Header the ReplyTo-Address is wrong. <addr:ReplyTo xmlns:addr="http://www.w3.org/2005/08/addressing"> <ad

  • Procurement type in MRP 2

    Hi Gurus, I am unable to change procurement type F to E in material master ? Could any one suggest me..... Thanks in advance

  • Please help! Audio problems...internal speakers

    HI all...everytime I put headphones into my audio port, the system wont return to internal speakers once I unplug them. It stays on headphones and the built in speakers....wont work. I have to restart a number of times before it goes back. Any help i

  • How to deleted profit center group from alternate hierarchy

    Hi All, I had created a alternate profit center hierarchy in tcode kch5. I want to delete one profit center group, but system is not allowing me to delete the same. I tried to delete the profit center group through tcode kch2 or kch3, but system is n