N95 backup file not recognized after Firmware upda...

Hi,
I've been updating my N95 from V11 to V12.0.013 right after I did a backup file. Backup went ok and no error reported.
After fw update, I tried restoring data but Content Copier informs that "no earlier backup file exists for this phone".
I've tried selecting folder where back-up file is saved but it does not recognize it.
I was using PC Suite 6.83 and decided to upgrade to 6.84 just released, to have another try but it still doesn't find backup file, eventhough it exists (2007-07-12 Nokia N95.nbu)
Could you please instruct if there are some specific steps to go through in such case??
I'm using XP, Service Pack 2
PC Suite 6.84
N95, V12.0.013
Many thanks!
Flo
P.S.: If needed I could send mentionned backup file but it is huge (42MB)

please try noki to make sure the backup file is ok: this thread
What's the law of the jungle?

Similar Messages

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

WRT160NL Usb storage not recognized after firmware update

Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.

Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
After install and re-start, Logitech hardware worked perfectly, as before.
Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

New Nikon Df camera RAW files not recognized in Bridge and Photoshop. Is there a fix? Surely Adobe make a mistake and not keep up with Nikon.

I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
Would post in ACR forum and see if they know anything more. http://forums.adobe.com/community/cameraraw

Libc.so: file not recognized: File format not recognized

Hi,
While running the "cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install"
i am getting the error.
[appldev@datadev lib]$ cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install
rm -f de60desm /appldev/devora/iAS/6iserver/bin/de60desm
- Linking de60desm executable...
gcc -o de60desm -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib//stubs/ \
/appldev/devora/iAS/6iserver/procbuilder60/lib/detk2.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demsr.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demcl.o \
/appldev/devora/iAS/6iserver/procbuilder60/lib/ui10.o /appldev/devora/iAS/6iserver/procbuilder60/lib/uiicxd.o \
/appldev/devora/iAS/6iserver/rdbms/lib/defopt.o -lde60 \
-lca60 -lucol60 \
-lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
-luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /appldev/devora/iAS/6iserver/lib/libpsd.a -lplsf -lplsb -lextp \
-lslax /appldev/devora/iAS/6iserver/lib/nautab.o /appldev/devora/iAS/6iserver/lib/naeet.o /appldev/devora/iAS/6iserver/lib/naect.o /appldev/devora/iAS/6iserver/lib/naedhs.o `cat /appldev/devora/iAS/6iserver/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /appldev/devora/iAS/6iserver/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
/appldev/devora/iAS/6iserver/lib//stubs//libc.so: file not recognized: File format not recognized
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
My OS version is RHEL 5.
Please suggest.
Thanks in advance.

But We are facing another issue while running "cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install"
[appldev@datadev lib]$ export LD_LIBRARY_PATH=/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads/
[appldev@datadev lib]$ cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install
Last few lines Error:
ld -shared -o rwows60.so -z text -G -export-dynamic -L/appldev/devora/8.0.6/lib/ -L/appldev/devora/8.0.6/network/jre11/lib/linux/native_threads -L/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads /appldev/devora/8.0.6/reports60/lib/rxmawt.o /appldev/devora/8.0.6/reports60/lib/rwsows3.o /appldev/devora/8.0.6/reports60/lib/rwswif.o /appldev/devora/8.0.6/reports60/lib/rwswcj.o /appldev/devora/8.0.6/reports60/lib/rwswcs.o /appldev/devora/8.0.6/reports60/lib/rwswm.o /appldev/devora/8.0.6/reports60/lib/rwsws.o /appldev/devora/8.0.6/reports60/lib/rwswcm.o /appldev/devora/8.0.6/reports60/lib/rwswk.o /appldev/devora/8.0.6/reports60/lib/rwswu.o /appldev/devora/8.0.6/reports60/lib/rwswur.o /appldev/devora/8.0.6/reports60/lib/rwswx.o -lzrc60 -lca60 /appldev/devora/8.0.6/lib/nautab.o /appldev/devora/8.0.6/lib/naeet.o /appldev/devora/8.0.6/lib/naect.o /appldev/devora/8.0.6/lib/naedhs.o -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -ldl -lm -lpthread -ldl -lpthread -lm -L/usr/lib -lm -lc
/usr/lib/libc.so: file not recognized: File format not recognized
make: *** [rwows60.so] Error 1
Kindly suggest..What is the document/step you are following?
Thanks,
Hussein

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

Mp3-file not recognized on my Samsung SGH-E720 mobile phone

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

Password not recognized after removal of corrupt backup file

I removed a corrupt backup file of my iPhone 4 from iTunes and now it does not recognize my password anymore. The password is correct, as I wrote it down when I set it up. Any thoughts? This must be some kind of flaw in iTunes or iOS for iPhone.

Don,
Take a look at this article: http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
Under the "Reset Mac Password - without a CD" it will walk you through booting to single user mode and removing the setup file. When you reboot it will treat the computer as if it had never gone through the setup and allow you to create a new user account. This will NOT wipe the computer or the user that is there, but will create a new user that you can then use to reset the password of the account you already have.

Time machine (older) backups not recognized after renaming the drive

Hi all.
For quite sometime I've been backing up my data (in my Mac Book Pro) using the time machine to an external drive.
Recently I changed the name of the drive I was backing up to from Finder and now I see the older backups using Finder but they're not recognized in Time Machine mode.
Is there anything I should do to make it know that those older files are actually in the same drive? I'm guessing changing a couple of lines in a text-only file (such as an XML file) where there's a file mapping will fix the issue but I'm not sure which file and where exactly that is.
Thanks in advance.

Thanks for the valuable online resource you shared.
There's a lot of critical information there. Bookmarked.
Back to the issue… Before taking any action I created an additional user in Mac OS. This had nothing to do with the awkward behavior of the TM, it was just something I should have done long ago.
After I created that user I wanted to make sure that the problem persists before doing anything. So I logged of the new account and switched to the admin account, and for the one last time I entered the TM mode. Guess what? While managing users the system must have corrected something and it finally decided to recognize my older backups! This is pretty awkward but it just happened and I'm seeing all the backups in TM mode now.
Thanks again for the help and the link

How to get files of a dmg thats not recognized after a drive recovery

I just had to recover my hard drive I managed to recover my .dmg files that I created with a pass word using disk Image. Now when I go to open the dmg it ask me for the pass word I type it in and get this message ....Unable to attach "C-00055.dmg."(not recognized) so my problem is how to I fix this or get my files out of the dmg? its showing me that 50Gb witch is the correct size of the dmg I created I have done all the disk utility crap everyone keeps posting I need a real solution to this problem Im not familiar with the Terminal but if some one has a way to do it using the mac Terinal I dont have a problem using it if your instructions are clear.
Thanks .

You would need to restore your phone as a new device in iTunes, not from back up, that's the only way to remove the data.

DVD drive not recognized after Security update

Hello -
Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPhoto 6.0.3, iWeb 1.1, and Security Update 2006-003. I installed the Security Update and rebooted. I had read about an issue with DVDs, so promptly inserted a DVD-R disc of mine with a movie on it (not a commercial DVD, footage I had shot on my own). It was not recognized. I restarted with the mouse button held, no luck. I repaired permissions, no change.
I restarted from the backup on the external drive and cloned the backup over to my Powerbook. The problem did not go away, there the DVD sits, unrecognized. Tried to see if DVD player would see the DVD, got a message "There was an initialization error. A valid DVD drive could not be found [-70012]" disc burning in System profiler says no burning device was found. Tried to re-install DVD player via 4.6.1 update, got a message "Compatible DVD hardware was not detected, installation will not proceed".
Where to next? I haven't booted into open firmware to try to eject the disk that way, but one post on the discussions here somewhere had no luck. I'd really rather not erase and re-install and migrate from my back-up, but if that is all that's left, ok. Thanks for your help.
BTW, 10.4.6 ona 1.5 GHz Al PowerBook with 2GB RAM, not original RAM but Samsung from OWC. Thanks again.

Well, one thing I had not tried was to reset PRAM//NVRAM. I combined that step with shutting down, unplugging the power cord and letting it sit for 15 minutes. Reconnected power, restarted while holding cmd-option-P-R through the second start-up chime, and viola, my DVD appears on the desktop, the drive is listing in the system profiler, problem gone. Thanks all for the rapid responses.
Darth

Replacing .xmp sidecar files not recognized in Lightroom 3.6- Lr 'Guru' Question Alert!

- I have 'Automatically write changes ino XMP' checked
- I have not moved my catalog or files for years and only continue to add files to my catalog.
ISSUE:
I made some accidental global changes to about 600 .cr2 raw images and to save me time in recovering from each change I made, I closed Lightroom and then deleted the sidecar .xmp files in the folder. I then copied the .xmp files from a backup created and then launched Lightroom again- there was no indication that the metadata had been changed and thought that was odd. I right-clicked on the folder and slected 'Synchronize Folder' and the only option was 'scan for metadata updates' so I tried to synchronize from there- still no changes made to the image previews. The Metadata -> Sync Metadata option was grayed-out so that wasn't an option either.
What I finally had to do was highlight all the files in the Library module and select Photo -> Read Metadata From Files and ONLY after that did the previews update and read from the newly imported .xmp files.
So, my question is WHY did Lightroom not see that the .xmp files were changed as I have experienced in the past?

I would have done Read Metadata from Files as my first choice.
From what you say, the LR metadata data was newer than the XMP metadata date and LR’s metadata updated date was newer than the XMP file-modification date so why would LR overwrite its newer metadata with older XMP metadata with a Synchronize? It might have worked the way you wanted if you had changed the file-modification date to be something current, by using a “touch” command or editing the contents of the XMP files, but LR seems to have done the right thing by not updating its internal metadata from and older XMP file using Synchronize and requiring an explicit command to do so.
It used to be impossible to update XMP files to the current set of edits if LR thought the metadata was current even if you explicitly commanded it to Write Metadata to Files, so Adobe has made adjustments to how LR and sidecars work together.
If LR used to revert edits based on older XMP sidecar files, that sounds wrong, and probably Adobe has fixed things to work in a more safe manner.
Do you remember if you saw an ! on the thumbnails indicating a metadata conflict or was LR completely unaware that the XMP files had been reverted to an earlier copy?

N95 backup file not recognized after Firmware upda...

Similar Messages

Maybe you are looking for