N95 bluetooth connection

I am unable to connect my motorla H350 bluetooth ear piece to my Nokia N95 8GB. Please tell me if anyone knows how. Thx
Solved!
Go to Solution.

As its a Motorola and you are on a Nokia board, i'm not sure of how that headset works.
But i can give you a vague answer.
You will need to get that headset into a 'pairing mode', how to do that, i'm not sure, usually by holding a button or two down until the lights flash a different pattern.
Then search for a BT device with the phone and if it finds it you might have to input a pairing code which is usually 0000
Try that.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

  • N95 Bluetooth connection with car

    I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
    With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
    Is there any trick to open the phone directory for use in bluetooth mode?
    Best regards and thanks in advance.
    Sunni

    Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
    Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
    Thanks for the above link. http://europe.nokia.com/A4143881
    It's the 2nd one down.....ie
    Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
    Nokia_810_Contacts_Download_S60_3rd.sis
    103.80 KB | English
    This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

  • N95 Bluetooth connection with carkit

    Hi, I have just purchased a new car with included bluetooth via the radio. I have managed to pair my N95 to the car, so everytime I get in the car, the phone shows connected to my car and the radio shows connected to phone.
    HOWEVER, I cannot make any calls or receive calls. When I try to make a call it tells me in the radio 'No Network'. I have called the car sales people, they told me it should work. Phoned my provider (3) and they told me its nothing to do with them, as I can actually make calls from my headset while sitting in the car.
    So the problem seems to be with the car. When I switch on the remote sim access, I cannot call from the handset while the car is running. It's weird. My partner has a Nokia as well, and that works without a problem.
    Any ideas anyone? I've seen lots of threads about similar issues, but no real solutions.

    Manufacturer carkits have pretty bad track records connecting to phones via bluetooth. I myself had plenty of problems until I got the software on the carkit updated.
    For a start, make sure you have the latest firmware for both phone and carkit. You should should then delete the pairing on both the carkit and phone and then repair. It is worth trying this a few times if it still doesn't work. I did this about 5 times before it finally worked and has been working since, touch wood.  

  • Can not connect to internet using bluetooth connection with Nokia N95

    Hello!
    I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
    When i connect using usb cable connection between Nokia and Mac - everything is OK.
    Where is the problem?
    Thank you!

    Hello!
    I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
    When i connect using usb cable connection between Nokia and Mac - everything is OK.
    Where is the problem?
    Thank you!

  • N95: Lousy Bluetooth connection to headset when ba...

    Hi all,
    I have a small problem (but very annoying one)
    When my phone (N95) battery is low (50% or lower)
    The Bluetooth connection become very lousy, and it's almost impossible to use
    the Bluetooth headsets because I am getting a lot of background noises.
    When I am plugging the phone back to the charger the noises disappear.
    Any idea how to solve this issue?

    Uhm, that seems the only problem. If battery fully charged, then it works, if it goes down, then it doesnt work. The battery is the only constant changing aspect of the phone. In all seriousness the battery could be going dead for all we know as it is starting to give out lower output when charge goes down.
    Best thing you can do is to try another battery.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • N95 Bluetooth wont stay connected to Pioneer DEH-9...

    Blue tooth pairs fine but disconnects after a few seconds, I have tried deleting all the pairings etc etc, problem seems to be when it starts to download the phonebook to the Pioneer unit, if I turn that option off on the Pioneer then the N95 stays connected...but I want the phone book to download onto the Pioneer...HELP!

    Are you actually pairing them by inputting the 6 digit code on the iPhone?
    -> http://support.ford.com/sync-technology/pair-your-phone-sync

  • Bluetooth connection problem X6

    My phone will not connect to my bluetooth headset anymore, I tried it on a friend's headset (same phone and model) nor will it connect to my company vehicle bluetooth device. It seems to be since I started using bluetooth connection to load pictures on my ibook laptop,could there be some settings that have changed? Any ideas would be much appreciated

    dear sir
              My nokia n95 8gb bluetooth cannot authenticat the phone

  • Can't Get Bluetooth connection to my Nokia n73

    Hi,
    I've been trying to get my Nokia N73 to sync with my mac, but it never gets connection either if I try from the phone or from the mac. I can get till to the step where I have to enter the password on the phone. From there on I've never got the connection between them.

    Hi,
    I have got a Bluetooth connection working with a Nokia N73 and recently a N95. In both cases I had to initiate the pairing from the Mac.
    One thing I have noticed with the Bluetooth connection to the N95 though, is that it is painfully slow when copying music over.
    Cheers,
    Andy

  • N95 & Bluetooth Modem

    Hey folks,
    Can anyone help? I have got the N95 to talk to the PC via USB cable and can use the Internet OCnnection gizmo in PC Suite all fine.
    However, i can't do the same when connected via Bluetooth instead of cable. The N95 is connected (i can sync with outlook, move files around etc)... but Windows (XP SP2) doesn't seem to find the modem.
    Any help very cool!
    /mark

    04-May-200702:52 PM
    flotess wrote:
    Hey folks,
    Can anyone help? I have got the N95 to talk to the PC via USB cable and can use the Internet OCnnection gizmo in PC Suite all fine.
    However, i can't do the same when connected via Bluetooth instead of cable. The N95 is connected (i can sync with outlook, move files around etc)... but Windows (XP SP2) doesn't seem to find the modem.
    Any help very cool!
    /mark
    Hi Mark
    I'm sure that you did but have you gone into PC Bluetooth Manager and tried pairing?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • Lenovo A1-07 Ideapad Tablet Bluetooth connection

    I am trying to connect my Lenovo A1-07 Ideapad Tablet to a Nokia 5230 phone using the bluetooth connection. Whilst I get the devices to pair they will not connect. Does anybody have any suggestions? 

    Hello, my lenovo ideapad a1 woudn't charge unless you plug the charger in really hard and hold it there. That is when the light comes on. I left it off but still it doesn't charge. Any help?

  • Nokia C5-03/Win7 Bluetooth connectivity problem

    When I am trying to connect Nokia Ovi Suite to my phone using Bluetooth, the pairing process seems to succeed, except the last phase: Then I receive a message that the connection did not succeed. The wizard gives then a possibility to try again with a different ID but it fails every time.
    It is the same problem if I try to pair the phone from computer's Bluetooth icon in the notification area. However, with using my laptop with XP this succeeds. Therefore I believe that my phone is OK but there is something wrong with my Bluetooth software in Win 7 computer. Nokia Ovi Suite lists it:
    - Microsoft (Version: 6.1.7600, subversion: 16385)
    When I start the computer, the Event Viewer shows the following error:
    "The Bluetooth driver expected an HCI event with a certain size but did not receive it."
    Source: BTHUSB
    EventID: 5
    The Microsoft's "Event Log Online Help" onthat window does not suggest anything.
    However, this may be the actual reason for the problems but I do not know how to fix it.
    I have tried Microsoft's "Fix it" tool but it did not fix this problem.
    Any ideas what to do?

    Still the same problem.
    Now I installed the Nokia PC Suite and I tried to make a bluetooth connection to it.
    Everything goes again well except after the last phase when I give the asked pin number in my phone, the computer ponders a while and shows then a window with the text that the phone cannot be verified.

  • How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

    I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
    HotSync over bluetooth works successfully.
    Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
    I think I have narrowed my problem down to 3 things.
    (1) Finding Network Access properties (to allow connected devices to access the internet)
    (2) Finding Centro's Network Connection Type: PPP
    (3) Finding the correct Login Script to use
    for (1) I think I've looked everywhere; found nothing on Network Access. 
    Checked control panel: only Bluetooth Local COM
    Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
    I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
    Nearly all the forums that I read says to choose Connection Type: PPP.
    (3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
    First script:
    Send: CLIENT
    Send: CLIENT
    Wait for: CLIENTSERVER
    End:
    Script 1 Connect Log:
    =======================================
    Connect Log
    S: client
    S: client
    R:
    Err: 0x121F   <<<netErrUserCancel b/c I canceled it. 
    Not connected
    ========================================
    I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
    Second script:
    Send CR:
    Delay: 1
    Send: CLIENT
    Wait For: CLIENTSERVER
    End
    **UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
    Even without the script it has problems "Signing In".
    I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
    I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share.  If not, please share any ideas.
    Thanks!
    -Eric
    Post relates to: Centro (AT&T)
    Message Edited by naisanza on 01-01-2009 02:26 PM

    I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
    For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
    Post relates to: Centro (Verizon)
    Message Edited by Cogwheel on 02-13-2009 09:45 AM

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • Bluetooth connection fails iOS 8.1

    My iPhone5s cannot make a Bluetooth connectivity with any of my Macs(MBA mid-2013, iMac late-2012, MacPro) all running Yosemite 10.10. Prior to upgrading to Yosemite the same iPhone running on iOS 7 did make successful bluetooth connectivity. My iPhone5s is on 8.1. Surprising even though it cannot have connectivity, it sees and stay connected for a second or two and then will say "Not Connected". But the same phone connects with Blueant S4 handsfree Speakerphone - except that I have to make a connection each time. In the past, it used to connect automatically when I was in the range of my device.
    Yes, I have tried reset PRAM, SMC resets on my Macs, powered OFF and ON my iPhone5s and even reset my NW connection. In addition, I have other iPhones in my family and none can make connection to Macs which run on Yosemite(tried 4s, 5 and even 6). But the same iPhones make successful BT on Macs running Mavericks and Mountain Lion(yes one MBP still exists). So I am guessing it is changes in Yosemite that is causing the problem. Because I am going through this problem - my family members who have Macs do not want to upgrade to Yosemite as they depend on BT connectivity for their external devices. I don't blame them, but sounds very silly to me that Apple messed up big time with BT connectivity. I see many reporting similar issues, but for many resetting PRAM and/or SMC they have been successful.
    Any help would be appreciated. Again I am not referring to Handoff (which it is working for me) but I am interested in BT connectivity with Yosemite. This is important because external BT devices need to be connected(Headphones, Earbuds etc).

    I went to the Apple store yesterday because I was having the same issue in my Honda Accord after I updated to iOS 8.1.1.  The very helpful rep there suggested that I go to Settings -> General -> Reset on my phone to reset my iPhone 5 General Settings.  She said that it's like an oil change for the phone that cleans out a lot of the junk.  After doing this, I was able to stream both my music and Pandora in my car again.
    Note:  When you reset the General Settings, you will lose your phone password and background image (not a big deal).  You will NOT lose your pictures, video or emails.
    Hope that helps!

Maybe you are looking for

  • Duplicate loops when GarageBand installed

    I've noticed in GarageBand that I have many duplicate items in the loops browser. Almost every sample, if not all, is present in the list twice. Soundtrack (and FCE) came preinstalled on my Mac when I bought it from Apple, but I don't use Soundtrack.

  • Execute a program only in background

    Hi, When we set sy-batch to 'X',this will enable the background processing functionality. But is there any other variable or any method to avoid the below functionality. execute program by pressing F8.On selection-screen,in the menu bar under 'Progra

  • Cd playback is crackly in itunes

    Hi, I hope someone can help me out.  I purchased a new Van Halen cd.  It plays perfectly in the car and on my husbands laptop and his ipod etc. However when I play it on my itunes on my laptop it is really crackly, like a bad radio station. Ive googl

  • Lost DWT templates!!!

    OK....I lost the template files for a rather large site. Yes, it was a stupid thing to do. But, what I need to know now is...is there any easy way to recreate them? You see, I need to change the Spry menu object across the site, but I cannot change i

  • What is the standard component configuration for tuition fee reimbursement   in sap webdynpro?

    what is the standard component configuration for tuition fee reimbursement  in advance claims  in hrms in webdynpro?