N95 - Broke - Help & Your Experiences please!!!

Since Monday my Nokia N95 has been playing up. The screen was freezing, changing colour and the navigation keys weren't working properly. It seemed slow to respond, but I was still able to use it.
By yesterday, the problem was getting worse and the screen kept 'going off' and coming back on again.
I phoned Orange who advised me to do a master reset...I did this but it did not solve the problem. Grrr
I have also updated the software through the Nokia website but since then the screen wont even come on. If I turn the phone on & off it makes the right noises but the screen is blank!!!
When I phoned Orange, I was informed that they only supply a 6mth warranty on their phones and that I need to contact Nokia to get it sorted. (otherwise I can pay £70 for Orange to send me out a new one!)
Does anyone know how long they have only supplied a 6mth warranty for? I am in month 11 of an 18mth contract and with all previous phones was given a 12mth warranty.
Has anyone else experienced the same/similar problem with their N95?
Mine has been well looked after and its not been dropped, so can't understand why this problem started on Monday?
I am hoping to take it to my local Carphone Warehouse to be repaired, but does anyone know how long this takes? I feel lost without my mobile
Sorry for the long post...Thanks in Advance
Gem

That is awful service from orange, all they seem to do now is lie or try to rip customers off, makes me glad I left them years ago! This must be some new policy they've introduced because the phone should be covered by warranty for the life of the contract. At least you still get the 2 year nokia warranty.
There's nothing that you can do to fix it yourself but I recommend that you do not take it to the carphone warehouse. They will most likely take weeks (or months) or just tell you that it's beyond repair to force you to buy something from them.
The fastet way to get it repaired would be to send it to nokia using the freepost service but it's worth paying to send it registered delivery. It shouldn't take longer than 2 weeks. You could also take it to another nokia care point but again avoid CPW.
Freepost returns & care point locator: www.nokia.co.uk/A4767799
Message Edited by psychomania on 05-Mar-2008 11:03 AM

Similar Messages

Interface Monitoring - any example from your experience please ?

Hi Gurus,
In Interface Monitoring (as a subset of BPM), as you may be aware, as of Software Component ST-SER Release being 700_2008_1, a new functionality is supported:
http://help.sap.com/saphelp_sm40/helpdata/en/2c/40328724e2431ba71958275b15e9fb/content.htm
Well, I am keen to learn from your experiences if you have already used this.
My specific question is: Can you please share an example, from your experience, an example of Interface Scenario, Interfaces and Interface Steps for SAP interacting with Non-SAP systems inside/outside the company?
Best regards,
Srini

Closing this for housekeeping sake.

Upgrade R11.5.10 to R12.1.3-- please share your experience

Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance

user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Please add your experience to this thread: LR V1 vs LR V2- on YOUR system

Just out of curiosity sake...would people mind putting a few thoughts here as to their upgrade experience. PLEASE NO posts about speed issues, or arguing over system specs etc etc...there are already plenty of those threads here.
Instead what I am asking is for people to simply answer the following questions, no more no less. So if you like to participate please keep the posts simple. I am hoping this will provide some idea to those of us who have yet to upgrade as to what we can expect. Thanks for helping..
1) What OS, ie Windows or Mac (XP or Vista, What Mac OS version)
2) Processor type (cores and speed)
3) Ram (amount and speed if you know it)
4) Main working Hard drive (internal, external-& connection here- And speed ie 7200, 10,000, striped raid...etc)
5) Average # of images in library
6) In you subjective opinion would you say that LR V1.x ran:
a) Adequate
b) Good
c) Screaming fast
d) Slooow
7) Since upgrading to V2 on your CURRENT system how would you rate LR V2 vs your experience in V1? Please use the above a-d answers
8 ) After your experience with question #7, did you upgrade your system? If so what did you do and how did it affect your perception of speed in LR V2? Again using the above a-d answers
Thanks again. I know this is not scientific, nor does it address all the possible variables. But it will give us an idea as to how LR V2 MAY run on our systems when compared to V1

1.Xp-sp3
2. 2G Amd Athlon 64
3. 2456 Mb memory
4. Internal 7200
5. images +- 1700mb (new cataloque for Aug.)
6. V1.4 -good, but would lock up on export once a week
7.a)initially good -first two days after install
b)uninstalled v1.4 and v2 went from sloooow to very bad.
c.Today Aug-Registry clear out of anything 'Lightroom',Moved any folder connected to Lightroom off the hard drive except current cataloque, UNINSTALLED V2. shut down computer-rebooted.
d. Reinstalled V2, redid preferences, opened current cataloque, redid a develop preset EVERYTHING is working WELL! Local adjustments now usable.
8.No changes to computer. Should have cleared out old Lightroom stuff before installing V2

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

My iphone 4s cant activate after i update the ios to 6.0.1, always shows this message " Your request couldn't be processed" we are sorry but there was an error processing your request, Please try again later........please someone help me...

My iphone 4s cant activate after i update the ios to 6.0.1, always shows this message " Your request couldn't be processed" we are sorry but there was an error processing your request, Please try again later........please someone help me???

It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
Was it?

"we are unable to process your request please try again later" error message after restoring my iPhone! HELP!

"we are unable to process your request please try again later" error message after restoring my iPhone! HELP!

I am having the same issue. I when I try to donw load a program after I get and email that says the latest epsidoeds is ready to downloae. This just statrted the other day. I am seeing this problem show up on other forums as well.

K8n neo2-f nf3 ultra board - onboard nic problem? Please post your experiences

I just ordered the k8n neo2-f nf3 ultra board, with a venice 3500+ chip, from newegg. I saw various posts on the mobo, however, from people who said the onboard nic doesn't work right out of the box, that they had to go in and manually enter the mac address in Windows that they retrieved from a sticker on the parallel port.
I can deal with a problem like that easily, but I find it hard to believe MSI would ship such a defective board design as that. Is this really the commonplace experience with this board? Please post your experience with this board if you've used it or had experience with it

Quote from: Scubahard on 15-September-05, 13:22:52
Okay I typed my address under the "network addapters" and I still do not have any internet access. I even tried to reboot...and nothing. My computer knows when I have a cable hooked up to the port. It will tell me "network cable connected" or "network cable unplugged." I hooked up my netgear network card and I was able to get online.
Should I be messing with the "authentication" tab and/or the IEEE 802.1x setting?
My windows 2k computer has a broadcast "node type" while me K*N Neo2 board does not have a line for node type (under ipconfig). Also my XP computer does not have a line that will tell me the values for: DHCP Server and DNS Servers. It also has a no value for the default gateway line. It DOES have a value for the "Connection Specific DNS Suffix". It is for comcast.
I hope all this is not too confusing. I was trying to list all the questionable settings. What should I try next?
Thanks!
Well, if you're wondering about the 'dhcp server', 'dns servers', 'default gateway', etc., that is all in the 'Network Connections' folder which can be reached from the Control Panel. To get to those settings, you right-click on the 'local area connection' that corresponds to the onboard lan, and click 'properties'. Then, select 'network protocol(tcp/ip)' in the list of networking components and click the 'properties' button. That will bring up the set of tabs where you can set those properties (although there is no 'dhcp server' address setting, just the option to either specify an address or use dhcp to automatically assign an address).
I get the impression, though, that you're saying if you slap in a pci network card, it connects right away, so I doubt any of those settings are needed (unless you left out the part about going into the tcp/ip settings for the pci nic and specifying an address, etc., which I doubt you did). Have you considered contacting msi tech support on the problem? If it's a new board, I'm sure you're entitled to free tech support. It seems like, with all of the chatter on these boards over this issue, they should be well aware of it and be familiar with the ways to 'fix' it.

A new member, somewhat on right track but need your experience to help me!!

Hi Folks!! I am here just like most of you are...to rebuild my credit. Here is a little bit of back ground.
I am 23 now and got my first credit card at 18 not knowing anything about credit. Just like most of the teen agers, i got 3-4 credit cards. Maxed out blah blah. I got into an accident, thought I paid all the medical bills. 7 months later i found i forgot one. It had gone to collections. At that point, i was dumb, i stopped paying for everything. 3 years later, i realized I need to grow up and get a better score. Paid of most of the collections in full and some settled. A few of them actually took it completely off my credit so its gone now. Credit score went from 460 something average to about 560 for experiean, 642 transunion and 642 Equifax based on Credit Karma.
Got an account with a very reputable credit union California Coast Credit union and also Navy Federal. Opened the following accounts based on my sitaution and how much I know about credit now.
CapOne: $500 secure card as soon as I paid off the collections.
CapOne : $500 regular card offered after 3-4 months of regualr payments.
California Coast: $1000 Secure Installment Loan. Navy Federal: $2900 credit card offered when i joined, accepted it.
Navy Federal: $14000 credit card cosigned with my parent.
Navy Federal: $27k auto Loan cosigned with mom and another $12k loan cosgined which are both actually my own cars. Just refinanced them now under my name too.
Income at the moment is about 60-70k. I am making sure i keep the total balance on credit cards under 30%. Now my questions are.
What tips can you guys give me?
Do i have to keep balance under 10-30% at all times or can I pay them off at the end of the month? Can the balance be liek 40-50% mid month and be paid off at the end of the month? This way i can charge everything to credit card instead of debit and pay at the end.
What happens if i pay off the installment loan ahead of time? Does it hurt me or benifit me?
Is cosigner as good of an imapct as being the main owner on CC or Car loan?
I have heard that i need to make 13 on time payments to be able to get a huge boost in my credit via auto/installment loan, Is that true? What if i sell the car before that and pay it off?
Thank you very much!!!

thatslowkid wrote:
Hi Folks!! I am here just like most of you are...to rebuild my credit. Here is a little bit of back ground.
I am 23 now and got my first credit card at 18 not knowing anything about credit. Just like most of the teen agers, i got 3-4 credit cards. Maxed out blah blah. I got into an accident, thought I paid all the medical bills. 7 months later i found i forgot one. It had gone to collections. At that point, i was dumb, i stopped paying for everything. 3 years later, i realized I need to grow up and get a better score. Paid of most of the collections in full and some settled. A few of them actually took it completely off my credit so its gone now. Credit score went from 460 something average to about 560 for experiean, 642 transunion and 642 Equifax based on Credit Karma.
Got an account with a very reputable credit union California Coast Credit union and also Navy Federal. Opened the following accounts based on my sitaution and how much I know about credit now.
CapOne: $500 secure card as soon as I paid off the collections.
CapOne : $500 regular card offered after 3-4 months of regualr payments.
California Coast: $1000 Secure Installment Loan. Navy Federal: $2900 credit card offered when i joined, accepted it.
Navy Federal: $14000 credit card cosigned with my parent.
Navy Federal: $27k auto Loan cosigned with mom and another $12k loan cosgined which are both actually my own cars. Just refinanced them now under my name too.
Income at the moment is about 60-70k. I am making sure i keep the total balance on credit cards under 30%. Now my questions are.
What tips can you guys give me?
Do i have to keep balance under 10-30% at all times or can I pay them off at the end of the month? Can the balance be liek 40-50% mid month and be paid off at the end of the month? This way i can charge everything to credit card instead of debit and pay at the end.
What happens if i pay off the installment loan ahead of time? Does it hurt me or benifit me?
Is cosigner as good of an imapct as being the main owner on CC or Car loan?
I have heard that i need to make 13 on time payments to be able to get a huge boost in my credit via auto/installment loan, Is that true? What if i sell the car before that and pay it off?
Thank you very much!!! Since you have an auto loan, the additional secured loan does not help your FICO scores. Pay it off and use that 1K for your emergency saving fund. You only need one installment loan for the credit mix portion of your scores. You could close the secured Cap One card and get a QS1 card in its place.

YOU and YOUR 6120 Classic. Tell us your experience...

Dear 6120c users, I'd like to know about your experience with 6120c. Your post may include the following details
*Your region (some problems seem region specific)
*When did you buy the 6120c
*Why do you love or hate it?
*What problems did you face? I mean the technical faults (inc. software) ONLY.
POLL: Would you recommend 6120c to another person? State YES or NO.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

Official Nokia reply to query on 6120c:
In response to your email, there is no known issue with the Nokia 6120
Classic mobile phone that Nokia is aware of. The Nokia 6120 Classic mobile
phone is compliant with applicable thermal requirements of IEC 60950
(International Safety Standard for Information Technology Equipment) and
also with Nokia's own product requirements. The heating of the mobile
phone is typical of electronic devices which does heat up after usage for
a period of time. You can always take your mobile phone to a Nokia Care
Centre to have it assessed and tested by our technicians to determine if
the phone is within it's specifications.
As for the speaker muting automatically, I would advise you to take your
phone to a Nokia Care Centre to have it assessed by our technicians. You
may refer to the website address below for details of a Nokia Care Centre
in your area:
http://www.nokia-asia.com/A4416072
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

Refurbished MacBook Pro Owners: Post your experiences with "Refurbs" here.

Hello Everyone. For the past few months I've been seriously thinking about getting a Mac notebook. When I get my Mac, I plan to run Final Cut Express HD for a few years, and If I decide to get a MacBook Pro then after a few more years I'll upgrade to Final Cut Studio. During my research of Macs I've stumbled upon something that really seemed to catch my eye; Refurbished MacBook Pro's for 41% Off Original Price. As far as I know, according to a few refurbished MBP owner's comments and Apple's brief description of it's "Stringement Refurbishing Process," it seems like a good deal to me, but of course it's always good to ask those who have already purchased a Refurbished MacBook Pro to see just how good of a job Apple does on refurbishing their products. That's why I've come here. For your comments. For all of you who have previously purchased a Refurbished MacBook Pro or other related item, please tell me about your experiences with your refurbished products. Was it a good experience? Or was it a bad experience, and feel free to go into as much detail as you need because I'll read your entire comment no matter how long. As you can see I'm pretty desperate for some owner's opinions so I will very much appreciate any comments that you give me. Thanks in advance for all your help and comments!

I received my refurbished 2.16GHz Macbook Pro on Tuesday and had a similar instance to Ty-Guy. My shipping box wasn't visibly damaged but the Macbook Pro was warped in the center which caused the case to buckle out, right above the lid latch. I called Apple Care and they offered a full refund or an exchange. I opted for the exchange. After the call, I decided I might be able to live with the Macbook Pro as-is with maybe a little "tweaking". After a few hours of use I realized it also suffered from the glitchy DVD drive issue - some would read, some wouldn't, some that would read were ssssssllllloooowwww. So another call to Apple Care and 20 minutes later I had a Fedex return label emailed to me. 2 hours after I printed the label from the Fedex website, I received another email that my replacement Macbook Pro was already shipped Priority Overnight to me! However inconvenient it may be that I have to send a unit back for defects, Apple more than made up for it by handling it the way they did.
And as far as Apple's strict refurbishment process goes, it is more than likely that the Macbook Pro arrived warped due to the shipping/packaging and not to lack of quality control. My Macbook Pro had no support underneath the center of it in the package. Which when subjected to say, a delivery person dropping it, would result in the area without support taking the brunt of the force. At least, that's my interpretation of it.
12 Powerbook G4 Mac OS X (10.2.x)
12 Powerbook G4 Mac OS X (10.2.x)
12 Powerbook G4 Mac OS X (10.2.x)

Mobile Supply Chain Applications(MSCA) - Share your Experiences?

All,
Any one is using MSCA?we starting rolling out across globa,i feel there is not much documentation also we are continuously getting issues with either scanners or terminal emulators.
I would be happy listen and learn from your experiences? and also we should have a seperate section for MSCA.
Rgds,AP

Hi;
Please see below notes which could be helpful on your issue:
MWA Troubleshooting Tips for Release 12 [ID 782162.1]
Oracle Mobile Supply Chain Applications Documentation Resources, Release 12 [ID 397154.1]
Oracle Mobile Supply Chain Applications Release Notes, Release 12.1.3 [ID 1101625.1]
Oracle Mobile Supply Chain Applications Release Notes, Release 12.1.2 [ID 968776.1]
Release 12.1.1 New and Changed Features in Oracle Mobile Supply Chain Applications [ID 872933.1]
Also see:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
http://oracleappscommunity.com/oracle/blog/tags/msca/
Regard
Helios

How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

In this forum, we can't help with purchasing issues.
My suggestion is to call that phone number.

Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line

I would really appreciate some help with my search & results page that is now throwing up the following error:
Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line (the line number refers to the following code:
mysql_free_result($RSsearchforsale);
mysql_free_result($RsSearchForSale2);
mysql_free_result($RsSearchForSale3);
mysql_free_result($RsSearchForSale4);
I am new to php and am setting up a dynamic site in Dreamweaver (thanks to the Missing Manual – very helpful). I apologise in advanced for my lengthy description of the problem (perhaps get yourself a drink before continuing!)
I have a Search page with 4 list menus where the user can select an option from ANY or ALL of the menus, if a menu is not selected the value posted to the results page will be 'zzz'.
On the results page I have 4 recordsets, all getting the correct results, only one recordset is required to run depending on how many of the menus from the search page have been selected and a test is run before executing the sql using a SWITCH statement checking how many of the menus had passed the 'zzz' values from the Search page if you see what I mean. The results page has Repeating Regions, Recordset Paging and Display Record Count. The exact result that I require are generated by this method.
THE PROBLEM, when a user makes a selection the first page of 10 results is fine, but the error message above is shown at the bottom of the page, AND when the user clicks NEXT to go to the next page of results THERE ARE NO RESULTS.
This is exactly what happens depending on how many menus selected and which recordset is used:
4 menus selected from Search: runs RSsearchforsale, results correct but 3 error messages on 1st page relating to mysql_free_result($RsSearchForSale2),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct results found. NEXT page is empty of results and still shows the correct display record count as if it should be displaying the records, also has the same 3 error messages.
3 menus selected from Search: runs RsSearchForSale2, results correct but 3 error messages on 1st page relating to mysql_free_result($RSsearchforsale),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct number of results. NEXT page shows results from the DEFAULT setting of the recordset and the Display record count reflects this new set of results. Also still shows the 3 mysql_free_results for RsSearchForSale2, 3 and 4.
2 menus selected from Search: runs   RsSearchForSale3, results correct but 2 error messages on 1st page relating to mysql_free_result($RSsearchforsale) & mysql_free_result (RsSearchForSale4). The display record count is correct. NEXT page does exactly the same as described in above 3 menus selected.
1 menu selected from search: runs RsSearchForSale4, results correct but 1 error meaasge on 1st page, mysql_free_result($RSsearchforsale). Display record count is correct and again when NEXT page is selected does as described in above where 2 or 3 menus selected.
If you have gotten this far without falling asleep then thank you and well done! I have pasted my code below and I know its a lot to ask but please please can you give me an idea as to where or why I have gone wrong. I felt I was so close at perfecting this search and have been working on it for weeks now. I feel sure the problem is because I have 4 recordsets on the page but I could find no other way to get the exact results I wanted from the menus.
Looking forward to any help.
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RSsearchforsale = 10;
$pageNum_RSsearchforsale = 0;
if (isset($_GET['pageNum_RSsearchforsale'])) {
$pageNum_RSsearchforsale = $_GET['pageNum_RSsearchforsale'];
$startRow_RSsearchforsale = $pageNum_RSsearchforsale * $maxRows_RSsearchforsale;
$varloc_RSsearchforsale = "mpl";
if (isset($_POST['location'])) {
$varloc_RSsearchforsale = $_POST['location'];
$vartype_RSsearchforsale = "vil";
if (isset($_POST['type'])) {
$vartype_RSsearchforsale = $_POST['type'];
$varprice_RSsearchforsale = "pr9";
if (isset($_POST['price'])) {
$varprice_RSsearchforsale = $_POST['price'];
$varbed_RSsearchforsale = "b5";
if (isset($_POST['beds'])) {
$varbed_RSsearchforsale = $_POST['beds'];
switch (true) {
case ($varloc_RSsearchforsale != 'zzz' && $vartype_RSsearchforsale != 'zzz' && $varprice_RSsearchforsale != 'zzz' && $varbed_RSsearchforsale != 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RSsearchforsale = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s AND price=%s AND type=%s AND beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc_RSsearchforsale, "text"),GetSQLValueString($varprice_RSsearchforsale, "text"),GetSQLValueString($vartype_RSsearchforsale, "text"),GetSQLValueString($varbed_RSsearchforsale, "text"));
$query_limit_RSsearchforsale = sprintf("%s LIMIT %d, %d", $query_RSsearchforsale, $startRow_RSsearchforsale, $maxRows_RSsearchforsale);
$RSsearchforsale = mysql_query($query_limit_RSsearchforsale, $propertypages) or die(mysql_error());
$row_RSsearchforsale = mysql_fetch_assoc($RSsearchforsale);
if (isset($_GET['totalRows_RSsearchforsale'])) {
$totalRows_RSsearchforsale = $_GET['totalRows_RSsearchforsale'];
} else {
$all_RSsearchforsale = mysql_query($query_RSsearchforsale);
$totalRows_RSsearchforsale = mysql_num_rows($all_RSsearchforsale);
$totalPages_RSsearchforsale = ceil($totalRows_RSsearchforsale/$maxRows_RSsearchforsale)-1;
$queryString_RSsearchforsale = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RSsearchforsale") == false &&
        stristr($param, "totalRows_RSsearchforsale") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RSsearchforsale = "&" . htmlentities(implode("&", $newParams));
$queryString_RSsearchforsale = sprintf("&totalRows_RSsearchforsale=%d%s", $totalRows_RSsearchforsale, $queryString_RSsearchforsale); } ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale2 = 10;
$pageNum_RsSearchForSale2 = 0;
if (isset($_GET['pageNum_RsSearchForSale2'])) {
$pageNum_RsSearchForSale2 = $_GET['pageNum_RsSearchForSale2'];
$startRow_RsSearchForSale2 = $pageNum_RsSearchForSale2 * $maxRows_RsSearchForSale2;
$varloc2_RsSearchForSale2 = "mpl";
if (isset($_POST['location'])) {
$varloc2_RsSearchForSale2 = $_POST['location'];
$varprice2_RsSearchForSale2 = "p9";
if (isset($_POST['price'])) {
$varprice2_RsSearchForSale2 = $_POST['price'];
$vartype2_RsSearchForSale2 = "vil";
if (isset($_POST['type'])) {
$vartype2_RsSearchForSale2 = $_POST['type'];
$varbed2_RsSearchForSale2 = "b5";
if (isset($_POST['beds'])) {
$varbed2_RsSearchForSale2 = $_POST['beds'];
switch (true) {
case ($varloc2_RsSearchForSale2 == 'zzz'):
case ($varprice2_RsSearchForSale2 == 'zzz'):
case ($vartype2_RsSearchForSale2 == 'zzz'):
case ($varbed2_RsSearchForSale2 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale2 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s AND type=%s) OR (location=%s AND price=%s AND beds=%s) OR (location=%s AND type=%s AND beds=%s) OR (price=%s AND type=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"));
$query_limit_RsSearchForSale2 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale2, $startRow_RsSearchForSale2, $maxRows_RsSearchForSale2);
$RsSearchForSale2 = mysql_query($query_limit_RsSearchForSale2, $propertypages) or die(mysql_error());
$row_RsSearchForSale2 = mysql_fetch_assoc($RsSearchForSale2);
if (isset($_GET['totalRows_RsSearchForSale2'])) {
$totalRows_RsSearchForSale2 = $_GET['totalRows_RsSearchForSale2'];
} else {
$all_RsSearchForSale2 = mysql_query($query_RsSearchForSale2);
$totalRows_RsSearchForSale2 = mysql_num_rows($all_RsSearchForSale2);
$totalPages_RsSearchForSale2 = ceil($totalRows_RsSearchForSale2/$maxRows_RsSearchForSale2)-1;
$queryString_RsSearchForSale2 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale2") == false &&
        stristr($param, "totalRows_RsSearchForSale2") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale2 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale2 = sprintf("&totalRows_RsSearchForSale2=%d%s", $totalRows_RsSearchForSale2, $queryString_RsSearchForSale2);
}?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale3 = 10;
$pageNum_RsSearchForSale3 = 0;
if (isset($_GET['pageNum_RsSearchForSale3'])) {
$pageNum_RsSearchForSale3 = $_GET['pageNum_RsSearchForSale3'];
$startRow_RsSearchForSale3 = $pageNum_RsSearchForSale3 * $maxRows_RsSearchForSale3;
$varloc3_RsSearchForSale3 = "mpl";
if (isset($_POST['location'])) {
$varloc3_RsSearchForSale3 = $_POST['location'];
$varprice3_RsSearchForSale3 = "p9";
if (isset($_POST['price'])) {
$varprice3_RsSearchForSale3 = $_POST['price'];
$vartype3_RsSearchForSale3 = "vil";
if (isset($_POST['type'])) {
$vartype3_RsSearchForSale3 = $_POST['type'];
$varbed3_RsSearchForSale3 = "b5";
if (isset($_POST['beds'])) {
$varbed3_RsSearchForSale3 = $_POST['beds'];
switch (true) {
case ($varloc3_RsSearchForSale3 == 'zzz' && $varprice3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($vartype3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz' ):
case ($varbed3_RsSearchForSale3 == 'zzz' && $varloc3_RsSearchForSale3 == 'zzz'):
case ($varloc3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale3 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s) OR (location=%s AND type=%s) OR (location=%s AND beds=%s) OR ( type=%s AND beds=%s) OR (price=%s AND type=%s) OR (price=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"));
$query_limit_RsSearchForSale3 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale3, $startRow_RsSearchForSale3, $maxRows_RsSearchForSale3);
$RsSearchForSale3 = mysql_query($query_limit_RsSearchForSale3, $propertypages) or die(mysql_error());
$row_RsSearchForSale3 = mysql_fetch_assoc($RsSearchForSale3);
if (isset($_GET['totalRows_RsSearchForSale3'])) {
$totalRows_RsSearchForSale3 = $_GET['totalRows_RsSearchForSale3'];
} else {
$all_RsSearchForSale3 = mysql_query($query_RsSearchForSale3);
$totalRows_RsSearchForSale3 = mysql_num_rows($all_RsSearchForSale3);
$totalPages_RsSearchForSale3 = ceil($totalRows_RsSearchForSale3/$maxRows_RsSearchForSale3)-1;
$queryString_RsSearchForSale3 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale3") == false &&
        stristr($param, "totalRows_RsSearchForSale3") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale3 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale3 = sprintf("&totalRows_RsSearchForSale3=%d%s", $totalRows_RsSearchForSale3, $queryString_RsSearchForSale3);
} ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale4 = 10;
$pageNum_RsSearchForSale4 = 0;
if (isset($_GET['pageNum_RsSearchForSale4'])) {
$pageNum_RsSearchForSale4 = $_GET['pageNum_RsSearchForSale4'];
$startRow_RsSearchForSale4 = $pageNum_RsSearchForSale4 * $maxRows_RsSearchForSale4;
$varloc4_RsSearchForSale4 = "mpl";
if (isset($_POST['location'])) {
$varloc4_RsSearchForSale4 = $_POST['location'];
$vartype4_RsSearchForSale4 = "vil";
if (isset($_POST['type'])) {
$vartype4_RsSearchForSale4 = $_POST['type'];
$varprice4_RsSearchForSale4 = "p9";
if (isset($_POST['price'])) {
$varprice4_RsSearchForSale4 = $_POST['price'];
$varbed4_RsSearchForSale4 = "b5";
if (isset($_POST['beds'])) {
$varbed4_RsSearchForSale4 = $_POST['beds'];
switch (true) {
case ($varloc4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varprice4_RsSearchForSale4 =='zzz' && $varbed4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varbed4_RsSearchForSale4 =='zzz' && $vartype4_RsSearchForSale4 == 'zzz'):
case ($varbed4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale4 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s OR price=%s OR type=%s OR beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc4_RsSearchForSale4, "text"),GetSQLValueString($varprice4_RsSearchForSale4, "text"),GetSQLValueString($vartype4_RsSearchForSale4, "text"),GetSQLValueString($varbed4_RsSearchForSale4, "text"));
$query_limit_RsSearchForSale4 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale4, $startRow_RsSearchForSale4, $maxRows_RsSearchForSale4);
$RsSearchForSale4 = mysql_query($query_limit_RsSearchForSale4, $propertypages) or die(mysql_error());
$row_RsSearchForSale4 = mysql_fetch_assoc($RsSearchForSale4);
if (isset($_GET['totalRows_RsSearchForSale4'])) {
$totalRows_RsSearchForSale4 = $_GET['totalRows_RsSearchForSale4'];
} else {
$all_RsSearchForSale4 = mysql_query($query_RsSearchForSale4);
$totalRows_RsSearchForSale4 = mysql_num_rows($all_RsSearchForSale4);
$totalPages_RsSearchForSale4 = ceil($totalRows_RsSearchForSale4/$maxRows_RsSearchForSale4)-1;
$queryString_RsSearchForSale4 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale4") == false &&
        stristr($param, "totalRows_RsSearchForSale4") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale4 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale4 = sprintf("&totalRows_RsSearchForSale4=%d%s", $totalRows_RsSearchForSale4, $queryString_RsSearchForSale4);
}?>

Hi David,
Thank you for your reply and patience, we are getting closer in spite of me!
Of course i needed to change the name of the recordset, i did that the first time i did it (when i got the error), the when i re did it i forgot, in my defense i was also trying to get a full understanding of the code using the W3Schools php reference and writing by the side of the code on a piece of paper what it meant in English.
Anyway after re doing the code correctly it still displayed all the records of my database but i realised that was because i was POSTING from the search form and when i changed it to the GET method I now get results when all 4 list menus are selected from and the paging works. After reading about the POST / GET method i chose the POST option, is the GET method a better option in my circumstance?
On my site now if the user selects from 1,2 or 3 of the menus rather than selecting the relevant records it displays the NO RESULT page, I would like my users to be able to select from all of the menus or ANY combination of the menus and find exact results for their search, for example if they only select a location and a price i want it display all records that match that location and price with any number of bedrooms and any Type of property: Perhaps this is due to how my list menus are set up, for each menu the first Item label is Location (or Beds or Type or Price) and the value i have left blank which i believe means that it will use the item label as the value, the second Item label for all menus is Any and again the value has been left blank. All other item labels have values relevant to database records.
I do look forward to your reply and cannot thank you enough for following this through with me, please continue to bare with me just a little more,
best regards
Tessimon
Date: Wed, 11 Nov 2009 06:56:24 -0700
From: [email protected]
To: [email protected]
Subject: Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line
You're not adding the WHERE clause to the SQL query. My example code uses $query_search. You need to change that variable to match the name of your recordset, i.e. $query_RSsearchforsale.
Moreover, the WHERE clause needs to go before ORDER BY.
$query_RSsearchforsale = "SELECT trueprice,`desc`, `propid`, `bathrooms`, `location`, `type`, `price`, `beds`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid ";
// Set a flag to indicate whether the query has a WHERE clause
$where = false;
// Loop through the associatiave array of expected search values
foreach ($expected as $var => $type) {
if (isset($_GET[$var])) {
    $value = trim(urldecode($_GET[$var]));
    if (!empty($value)) {
      // Check if the value begins with > or <
      // If so, use it as the operator, and extract the value
      if ($value[0] == '>' || $value[0] == '<') {
        $operator = $value[0];
        $value = ltrim(substr($value, 1));
      } elseif (strtolower($type) != 'like') {
        $operator = '=';
      // Check if the WHERE clause has been added yet
      if ($where) {
        $query_RSsearchforsale .= ' AND ';
      } else {
        $query_RSsearchforsale .= ' WHERE ';
        $where = true;
      // Build the SQL query using the right operator and data type
      $type = strtolower($type);
      switch($type) {
        case 'like':
          $query_RSsearchforsale .= "`$var` LIKE " . GetSQLValueString('%' .
$value . '%', "text");
          break;
        case 'int':
        case 'double':
        case 'date':
          $query_RSsearchforsale .= "`$var` $operator " .
GetSQLValueString($value, "$type");
          break;
        default:
        $query_RSsearchforsale .= "`$var` = " . GetSQLValueString($value,
"$type");
$query_RSsearchforsale .= ' ORDER BY detailstable.trueprice ASC';
>

I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

I am trying to order a book with iphoto, I keep getting the same error message.
" A network error occurred while processing your order, please check your network connection and try again"
I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
I have ordered two books a few months ago without any problems.
Now I keep getting the same message either half way into
the order or at the final hurdle after the images have been uploaded.
Any ideas?
My shared Network has been fine and that does'nt seem an issue.
Help.

Try again in a couple of hours - sometimes it is a temp condition
LN

N95 - Broke - Help & Your Experiences please!!!

Similar Messages

Maybe you are looking for