N95 & BT Homehub

Hi everybody, I'd really appreciate some help with a problem I'm having with a recently purchased n95.
I got the phone as an upgrade with 02 yesterday. I was told that I could use wi-fi on the phone, so when I got home yesterday, I tried to connect it to my BT Homehub (I already use the Homehub with an xbox 360 & a Nintendo DS and both work absolutely fine)
I tried to connect using the WLAN wizard. At first it couldn't locate the Homehub, but after a few moments it just seemed to appear, I entered the WEP key from the back of the Homehub, and tried to connect, it then wouldn't let me connect and seemed to no longer be able to connect to the Homehub. Later in the evening, I managed to connect to the Homehub and browse for about 2 or 3 minutes before it lost the connection.
Since then I just can't seem to connect at all, or even make my phone locate the homehub. I'm not very technical so I'm not sure where to start at all, any help with this would really be much appreciated.
Hayley

Hi bojangles
Go to Menu > Tools > Settings > Connection > WLAN > Show WLAN availability (YES) > Options > Advanced settings (YES) >scroll down to Power Saving - Change to disabled
If you want to save battery power change TX power level to 10Message Edited by scoobyman on 09-Jun-200707:09 PM
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Windows Vista + N95 + Image Store - "Error communi...

I am trying to store images from my N95 using the Image Store application. This worked beautifully in XP, but after upgrading to Vista, all I get is a dialog box telling me "Error communicating with the phone".
This happens for both Bluetooth and USB connection, and it doesn't help that I set the Image Store to XP compatability, or run as admin. I really miss the Image Store functionality, it took the fuss out of storing images from the phone completely.
How can I fix this?
Details: Nokia N95
V12.0.013
19-06-07
RM-159
Nokia N95 (03.01)
Window Vista Business
PC Sync - 6.84.10.3
Image Store 6.83.0.0
Best regards,
Goran

There is another cause and cure I think cause I just "fixed" my problem of this kind over many hours of agonising and trying the suggestions above. Another internet site tells you :
"This usually happens for the simple reason that Gallery on the S60 device is running and currently holding open one of the files you're trying to backup (and delete). Switch to Gallery on the smartphone, back out of the image or video clip and use 'Exit'. Now try the 'Store images' function again - it should work fine!"
Unfortunately I couldn't obviously see a photo open in the Gallery. I was trying to store 103 images and I noticed it was stopping at one. I had a look at that one, it was not that important so I deleted it and try again. And it worked! It was as if it was evil, and blocking the software at that point. So it backed up about 70 images and jammed again. Found another image which I remember taking with the camera about a week ago and deleted that one, again not too important. Tried again and it went all the way backing up to a photo I took yesterday.
So that's it, something is left half open when the photo is saved and it screws up image store when it reaches it. Actually, I think that last image which I took I screwed up by closing the camera cover before it had finished doing its thing. I think now the moral of the story is that the digital camera in my N82 and it's softwared needs some TLC, it is not that robust, you need to give it a few seconds to do it's thing or it half saves these corrupted images. I could view the stuffed up image perfectly on the camera and Im sure there would be a better technical way of properly closing it in symbian rather than deleting it but yay it is solved!!

Who can solve iSync problem with Nokia N95? (I use the Nokia plug already)

Hello
Since I bought my new cool Mac:, I sync my N95 with iSync and the Nokia N95 plug-in. Thinking at first that is works flawlessly (as other members here seem to think as well) I later found out, that if I make changes to any calendar or "to do" description! on either the N95 or the Mac it syncs, but only up until a certain number of characters. If I exceed this number, the description on the phone will simply be cut off - in the iCal it still fully appears though.
Rather surprising, since when syncing with a PC via the Nokia PC suite there is no such an issue. All my often lengthy descriptions are fully put on the phone. And if I sync back there are no problems either. So I guess it has to do with the iSync protocol or this Nokia N95 iSync plug-in? Any ideas, solutions...? Any help greatly appreciated!
A bit in despair
Zuckermann

The flex cable is damaged. Some years back when I had a Nokia N95 8GB the flex cable was damaged and for a few days the screen was showing strange colours at the display and eventually the screen became black. I went to a local repair shop and I replaced the flex cable and what I noticed was that the flex cable that it had no proximity sensor on it so I told the technician to remove the proximity sensor on the original one and replace it with the new flex cable. Another thing I discovered was that after fitting the flex cable and returning the cover the front camera was not in its usual position so the technician had to do some modifications to get it back to its normal position and after a few months it was damaged and this time I went to Nokia Care Centre and replaced the flex cable for a small fee and what I noticed was that the flex cable that I previously bought was a fake cable. The one bought from Nokia Care Centre had its proximity sensor and when the cover was returned the camera was in its exact position the same as it was with the original flex cable. What I wanted to say is that please beware of fake flex cables on the market and I suggest that you buy it from an authorised Nokia Dealer.
Ngwangwa - Six Million Ways To Die Choose One

N95 lock ups

Hi have just got my n95 and its great apart from it has started to lock up. The screen illuminates black and blank and the nav keys on the front light up. From this point all I can do is remove the battery and re boot it? Anyone got any ideas ???

28-Sep-200706:14 PM
sjwlifts wrote:
23-Sep-200706:04 PM
sjwlifts wrote:
Got it back o Friday, taking it back on Monday, same fault.....................watch this space...
Just to keep saga up to date my phone went back to car phone warehoue on Monday, went to there technical department on Tuesday and today is apparently on its wy back to Nokia as they cant fix it. Phone only out of the box two weeks, maybe it will be back in time so I can give it to myself for Christmas...............
update. MY PHONE IS BACK. Dont know what fault was but its been to Denmark had it back two hours. And so far so good.
Watch this space..............

N95 Help Application not working!

i have trouble with my N95 Help Application,
it dose'nt work, i can only run it, and see the main list,
i did'nt complain before cause i hardly used it!
but now, when i use help from other software, i get the same error "
message Memory Full. Close some applications and try again."
i have the latest firware!
what could be causing this!

I have the same problem - no in any applications or using the Help application itself.
Of possible interest ?>: is a 'help folder' I have with a name displayed in the Help application as 4x boxes.
Using: -Menu -Tools -Utilities -Help
...I have an odd looking file listed at the end (after 'ZipManager' & before '3-D ringing tones'). The name is displaying as 4 x boxes - presumably non display characters ?>
Is this folder on all N95s ? (i.e even those with a working Help) ?
Anyone know how/where to locate this folder ?
HammY

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

N95 8GB unlokced , Vibrating alert does not work

Hi
I just bought used N95 8 GB from my friend which is locked to a network provider.
My friend took it to shop to unlock service provider (he didn't realise that service provider does it for free), now I tried to test income call vibration but it seems to me it does not work , I tried under Tool > Profile > Create new profile (vibrating on) ,,,,but still there is no vibration when I receive call!!!
I tried "Factory Settings" for the mobile but still same problem
Would unlock be the reason for that (I don't know if vibration was working before unlock) ?
Any other suggestion how to test that ?
Thanks

jimmyireland wrote:
1st see if you have the latest firmware installed, if you dont have the latest update and if problem still occurs after the update try a hard reset the code is Press *#7370#
if this fails you will need to take it to a nokia care centre.
1- Yes it already has updated firmware
2- I did a hard resst without any success.
3- Would unlocking process normally create this problem ?
Message Edited by zillah on 20-Jun-2009 12:02 AM

After update N95 8gb i got big problems.

I make a backup of all but not the 8gb-memory, and restured all after upate, and everyting seems to work fine.
First problem; i see now i have no 3g 3 (no connection) competely dead, i can not use the phone to communicate.
Strange everything work fine after update yesterday and this morning, something happen when it was in the locker at work.
And now i can't use Maploader, it say i have no memorycard, i understand that problem, i delete the whole Cities-folder this morning, because i dont need Nokia GPS-program Wayfinder anymoore, i choose Nav4all instead, i try the maploader only to for testing, i don't want to download any maps.
I test maploader now only bacause my phone is completely dead in communication, try to find out why.
I check in Nokia Nseries PC Suit everything on PC & mobil are the latest update.
I have another mobile SE M600i with 3g 3-cashcard, i by that cashcard only to enable the phone to start, not for communication, that mobile have full 3g (and probably work fine).
Was it the thing that i delete the Cities-map, no it can't be, because i use the N95 8gb and it work fine after that.
after work i even have a missed call on that mobile, but i can't call back, it's dead in communication now.
Strange things happens now.
Kjell O

15-Apr-2008 11:48 PM
kjello wrote:
Where can i change networksettings, all settings i find is; 3, tre, tre(01), tremms, tremms(01)
Is your phone in another language? You should normally see 2 or 3 options.
1. Dual Mode
2. UMTS
3. GSM
Maybe you could try reseting the phone if nothing else works.
Always remember to backup your phone before performing resets as your data may be lost.
Try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone

N95 USB id not recognized if behind two levels usb...

Hi,
I spent a lot of hour, to reconnect my N95 via USB, because, explanation at the end, it seems impossible to connect the phone is there is a HUB between the N95 and the computer (else than the native buitin-the-computer).
Before everything was installed since two years. By accident equipement bluetooth have been destroyed and Windowd XP SP3 installation should have to be redone.
Even I many people that I am a professionnal in informatics, expert in some subjects, I have been lost. I pass on erratics ways, and lost hours to go to the diagnostic : mine :
The USB driver is unable to recognize a N95 (always set to the right USB connection PC-Suite or OBVI) if it is connected on a second level USB Hub.
as I have only three USB main ports I use two USB (USB2 and USB ... ) on my portable (DELL Latitude D800 and XP SP3)
During installation of PC-Suite or OVI, the soft see the "new usb device", sometimes says 'N95 master...." but never reaches to end the installation : what happends :
- the windows USB detection sees too at the same time (behind the HUB) the new USB device and propose to install it automatically, while PC-suite says "installing" (what ?).
then :
If you don't make anything this can spend as long siecles you want.
If you say OK to windows : it answers "impossible to install" and later PC-suite say "you have problems with your connection". If you disconnect you N95 you can have the "blue screen on <ousbehci.sys at address F76BE41D based at F76B7000 datestamp 433c099a>
If on windows you answer "cancel" it immediately detects "a new device" and so on... eternally. But it will create for each try an undefined device into the device manager (stopped at 32).
Some times the main N95 is detected and some others are seen but never all the link devices are detected and soft installed you are reconducted to the previous situation.
This as been repeated on clean installations (unistalling part of drivers installed)
If you connect your N95 directly on the first level of HUB it is perfectly installed.
But as my Hub are well alimented and Ucc controlled (7 disks, camera, Micro-cards reader etc...) ir is not a current alimentation problem.
Later when you reconnect your N95 is not detected if it his not connected on the first HUB level (integrated to computer)
So after this bad experience I have one advice to the others users (by security) :
- never install threw a second level HUB
- if after a good installation at a reconnect via an HUB, the 'new USB device found' main USB installer panel appears (if you change of connection this can be normal) but fails, which is not normal, connect directly your phone only on a main USB connection of your computer (and clean your device manager - XP SP3)
Trebly
03/01/2011 16:15

im having the same problem i think. When I plug my bionic into my computer nothing happens on my computer or my phone. I can't access any files from my computer. I think I may be stuck in charge only mode but I don't know how to get out of it. I have tried this on multiple computers. Anyone know how to fix this?

HOW TO EASILY SET UP WIFI WITH TH N95 AND A MAC WI...

Hi this is how to connect a mac running os x 10.4 (tiger) to a n95's network and succsesfully share the macs internet via airport (wifi)
first (on mac) go to:
system preferences then sharing on sharing click services and turn personal web sharing on (tick the box)
next go to internet and on the drop down menu next to "share your conection from" select built in Ethernet (or what ever you use to access net)
now tick the box that says airport and click airport options
copy in as follows:
network name: -what ever you want-
channel: automatic
tick enable encryption (WEP)
password: -use a word thats 13 characters long-
Wep key length: 128
click ok and click start!
now on n95 go to:
settings>connection>access points
then go options and new access point
connection name: use any name you like
data bearer: wireless LAN
Wlan networkname: search for network > select the network that you no is yours
network status: puplic
Wlan network mode: infrastructure
!!!!!!!!!before you go to wlan security mode push options!!!!!!!!!!
then advanced settings then IPV4 settings and enter in the following numbers
phone ip: 10:0:2:5
subnet mask: 255:255:255:0
default gateway: 10.0.2.1
primary dns address: 10:0:2:1
!!!!!before you enter secondery go back to you mac and go system prefs and then network on network it should say:
location: automatic
show: network status
from there copy your ip adress into your phones "secondary DNS address"
(you ip is located after built in ethernet where it says ip then somthing like 211:243 ect.)
now on the n95 go back until you get to where it said wlan security mode
wlan security mode: WEP
wlan security settings:
WEP Key in use: (hash)1
authentication tyoe: shared
WEP key setting's:
WEP encryption: 128 bits
WEP key format: ASCII
WEP KEY: - the 13 charictor password types in on the mac-
now go back until you you reach your main n95's menu
select tools then WLAN WIZ.
the network you created on the mac should apear as known select it then start web browsing!!!
hope it works for you as it did for me thanks

Hi ogigacz
On Leopard they hid away the APN field under advanced configuration options for bluetooth modems.
I don't know whether you have found this workaround:
http://n95blog.com/using-the-nokia-n95-as-modem-for-a-mac-over-bluetooth-on-vodafone-live-in-holland...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Snooze problem since software update on N95

I've had my N95 for about 18 months now. I don't use a lot of the things on it, but one I do use is the alarm clock to get me out of bed in time for work. I like to have a bit of "coming around" time so I usually have a few snoozes before getting up. I generally switch the phone off at night so I don't get woken by text messages and calls.
This has worked fine since I got the phone.
However, this week I upgraded to the new software and since then I've had the following problem -
When the alarm goes off and I press snooze (which makes the phone switch off again)the alarm doesn't come on after 5 minutes. However, once I turn the phone on the snooze alarm immediately comes on even if this is 10 minutes after it should have.
I tried the following test to try to replicate it once I had got to work. With the phone on, set the alarm for a few minutes in the future, then snooze - works fine. With the phone off do the same - works fine.
So it appears that this problem either happens when the alarm is for the following day or when the phone has been off for some time.
Has anyone else found this and does anyone have any suggestions of how it could be resolved?
Thanks

This all happened a while ago so it's going to be buried deep down in the forum. What I can do is summarize the problem here.
If the phone was switched off before midnight and left off overnight the clock would jump forward several days from time to time.
This would cause alarms not to go off at the desired time.
The snooze function was dysfunctional. Regardless of the snooze time set in the clock's settings, if you decided to snooze an alarm it would snooze for the default 5 minutes and sometimes freeze the phone up when the snooze time was up.
The workaround for these problems is to leave the phone switched on overnight, which is why I never noticed them on my N96 until reading about them here - I leave it on overnight. It doesn't fix the snooze duration problem but it does prevent the phone from freezing, which is a good start.
I think you'll find that the Nokia developers are already aware of this problem. When there's a huge outcry of despair like this on these forums, the moderators do pass the information back to the dev teams.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N95 8GB: Problem on deleting video file

Hi,
Is there any body experienced this problem. When I'm trying to delete a file from Video Centre > My videos directory, I'm receiving this error... "Unable to delete. File video.mp4 is open."
Do you have resolution for this? Tnx in advance.
Br,
Pete

21-Nov-200709:06 PM
pmpinguel wrote:
posted my detailed steps in the n95 8gb main discussion thread. go see
I followed your steps but I got this message.... "USB data transfer mode activated. MASS MEMORY MAY NOT BE USED DURING THIS TIME."
Actually the video file was not there anymore in my File Mgr folder but the problem is the video file is still there in Video centre > My videos folder. When I tried to delete the file using "c" or Options > delete, the error says "Unable to delete. File video.mp4 is open."
I also tried to reset the phone to its factory settings but still video file was there.
I think this is a bug. Pls advice. Tnx in advance.
Br,
Pete

N95-3 disconnection from laptop error

Everytime i disconnect my n95-3 via memory card eject, it automatically connects again straight away. So i have no option but to disconnect it via safely remove. When i do so i then get error on phone stating data may have been lost. data transfers should be stopped before removing the cable. Either way its a no win situation with an error.
History is a mirror of the past!
And a lesson for the present!
(Persian Proverb)

I mean the connection settings called "USB". There you can choose a default mode for the connection. I wondered if you have set that to "Data transfer". And mainly the second point of that menue "Ask on connection": if you have set that to "Yes"?
Sometimes the solution is closer than you think... sometimes farther

New Firmware Update for Nokia N95 (RM-159 ) :Decem...

Hello All,
It looks like new firmware update is available for Nokia N95 basic model .
Earlier Version of Firmware was : 30.0.015
Now the latest available Firmware was : 31.0.014
When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
I will wait for 2 more days for official communication from Nokia....

Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
Somebody should shine a light on this FW, or nokia has
done a lot of work for nothing!

Nokia N95 8gb latest firmware update 21/02/13

Hi, I have had a problem whilst updating my N95 8gb and now it appears, I think, that the firmware version I have is an older one than I had previously, but there isn't anything newer showing as availaable. I have 35,0.001. I am sure that the last time I had a problem, after it was "flashed", the firmware I had installed by the shop was this and then when I got home and went to restore my files, there was a new update available on line. The rreason I say this is that the icons and colours etc are like the version installed by the shop, about 1 year ago and when I updated the software everything was different. If what I am saying is correct, does anyone know if this newer firmware update has now been withdrawn or can anyone throw any light on the subject as I am a little confused! Thanks

If your N95 8GB is RM-320 the last available firmware for all product codes is v35.0.001. Using restore via Nokia Suite can only reset your individual personalisation settings.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N95 & BT Homehub

Similar Messages

Maybe you are looking for