N95 CLIP override problem

Dear All,
I have an annoying problem with my N95 since fw version 20. I know, that almost nobody is using this functionality, but as I work on the operator side, sometimes I'd like to use this for testing. My problem is as follows:
When the CLIP (Calling Line indentity presentation) is set to "OVERRIDE" in the HLR, whenever an incoming call arrives with ative CLIR, on the screen the calling party's number supposed to be displayed between #-s in Nokia implementation. It was working fine until fw version 12.
From fw 20 (21 also has this bug), in the ringing phase I can see only "CALL" on my display, without any number displayed. Later, in the call history (missed calls or received calls, depending if I answered or not) I can see the number as it supposed to be i.e. #12345678#, so the problem is not with the service in the network side...
As I know, that most of the people here has no chance to test it, I am waiting for someone's response how to reach the developers with this issue, as the local Nokia customer care sent me to the hell on a polite way with this issue, when I opened a ticket there.
Of course, if you have other ideas regarding this topic, I would appreciate that as well.

Thanks for the responses, I hope the developers really monitoring this thread, as on my operator has nobody, who testing these features (bcz my phone is running with generic Euro 3 sw and no with cust. spec. sw, and the marketing has no such service active to test it...)
About this SMSC address: for me, it is also annoying, but it is not new issue. I am using Symbian phones since 7650, and NONE of them could show me the SMSC address unlike series 40 phones. I tried to contact at that time when I realized it on my 7650 to the local Nokia Mobile Phones representative and he replied me, that this is not a fault, but it is a feature. At that point I gave up making development proposals, as I knew: I am too small point in the universe to take care about my ideas at such a big company, like Nokia.

Similar Messages

  • Has the clip marker problem been resolved in Premiere cs6?

    Has the clip marker problem been resolved in Premiere CS6.  As of early July, it was not!  Navigating, synchronizing clips seems impossible.

    Explain your problems with markers in this feature request form: http://www.adobe.com/go/wish
    Sorry, that's all I can offer you.
    TrueFriction wrote:
    I'd just like to add my voice to the chorus here - namely that Marker functionality for CS6 is extremely lacking, and has made my workflow for various tasks much longer and more tedious.
    In my case I'm trying to match professional footage of a concert with audience-submitted cell phone footage. The pro footage can't be synced with the non-pro footage via Pluraleyes because the cell phone audio is way too high to be analyzed properly. Hence I need to manually sync, which I can't do efficiently because I can't put clip markers on the pro footage once it's synced in pluraleyes and sent back into Premiere, because it only exists in a sequence.
    I have no idea why Adobe would remove a function used daily by its editors, one that was simple and reliable, for no reason.
    And what's puzzling is that there's been not even an acknowledgement of the issue from anyone at Adobe for 8 months.
    This doesn't make any sense. Usually customer service from Adobe is much better than this. Why no action on this one issue?
    BTW, if you want to add Clip Markers to clips in the Timeline, you can set a keyboard shortcut for that.

  • Clip with problem

    I'm doing an exercise for my students using Parallax, when using the Clipping Tool or propriendade Clip this problem happens, I wonder if I'm doing something wrong?
    to see the video
    Clipping Tool with problem - YouTube

    basicaly, I got a clip that acts as a botton from which a menu drops. the idea is to get the clip to play as I pass over it with my mouse pointer and disapear as i leave the click zone. the clip is on my root and in the clip on my first frame I've put that script that I've posted earlier. it works fine for the scroll over, but it doesn't disapear once i leave the click zone.

  • N95 8Gb Adobe Problems

    Hi
    Has anyone else having problems with Adobe (le 1.5) on N95 I had an email with a 6kb pdf file but the N95 doesn't reconise the file so I cant open it.
    Thanks
    Graham

    Hi guys Greetings to all. I am new here. Just wanted to add a few words after reading the posts about BT connection problems with the N95 and N95 8gb phones. I bought a new N95 8gb phone about 2 weeks ago togather with a i-tech Clip D bluetooth headset with OLED display. According to the specs the operating distance is 10 meters. I have tried 8 meters and it was working fine and so far so good. I have not tried any other BT headset but I am planning to get another BT headset. Any suggestions from any one of you guys out there. Thanx a lot guys.

  • Clipping Path Problem in CS4

    First let me say that I'm am still new to this program and this was so much easier to do in Freehand.
    When you use clipping mask in Illustrator to insert a JPEG into a shape it looks good until you see it on your desktop or open it in Photoshop, the border of the original size of the JPEG still shows up as white area, so I have to take the time open these clipped images in Photoshop just to crop out all that extra white area. I hope this is an easy fix or some simply step I'm missing?
    I asked an old friend who uses Illustrator all the time and he said that's the way it has always been, clip a photo in Illustrator then open it up in
    Photoshop to fix the clipping problem.
    I have attached JPEG to help explain what I need and what's happening to the photos.
    If anyone could help it would save me a TON of work.
    Thank You,
    Indyrebel

    indyrebel,
    You may do the otherwise dirty destructive deed in Illy:
    With the Clipping Mask selected:
    1) In the Transparency palette/panel dropdown select anything but Normal (Multiply is fine);
    2) Object>Flatten Transparency (just leave it at 100% vector and other defaults).
    This will rid you of the parts outside the Bounding Box of the path that shapes the Clipping Mask: a rectangle, even in case of other shapes such as ellipses, which does not hurt in your case.
    If you do it to (especially stroked) vector artwork, it may hurt.
    Obviously, the serious issue is with JPEG, not with PNG/GIF when transparency is applied; but it may be inconvenient in any case, having outlying parts selectable.

  • Link to online web service or set up my own? Clip Notes Problems

    I am looking for some kind of hard drive/server kit for hosting my own videos. I want send my clients links to their projects at certain stages, but not through YouTube. I have no idea how to set that up. I saw an ethernet/USB2/what-have-you Buffalo drive that I could supposedly serve from and store my archive files. Is that the way to go or is it better or more cost-effective to go with an online service?
    By the way, I could not get Clip Notes to work. In fact, it crashed my computer (or Premiere anyway). I should be able send direct from the timeline, correct? It didn't do that. Instead I had to send it to myself first - save to hard drive, and then email it to whomever. I don't see how it could work anyway. I can't email a 20 MB or bigger PDF file, can I?

    Running your own server would probably be much harder than setting up a page through a commercial-grade provider. First and foremost you would need to set up a server-class OS and webserver system (such as Apache running on a Linux kernel). Security becomes a big issue as you almost certainly *will* come under fire by bots looking for servers to infect. So, you'll need to learn Apache, setting up CGI, Perl and other scripts and firewalls to protect your investment. Then you still would need to set up a page with a secure entry shell to allow your clients in without letting others in (to protect NDA protected material and preventing other clients from "peering over your hsoulder" as it were).
    Also, if you have internet provided by Comcast or Verizon (or similar end-user broadband), those plans *explicitly* disallow use as a server and they most likely would shut you down if they detected the presence of incoming HTTP routing on port 80, and doubly-so if you are running a commercial website for the benefit of your business. They have specific "enterprise class" broadband packages but they are typically more expensive (often twice as much as "home" packages) as they provide more consistent and reliable speeds and are usually synchronous rather than the typical end-user asynchronous broadband (ie end-user is 2Mbs down and 300Kbs up, where enterprise class would be 4Mbs down *and* up). The benefit being that people visiting your server are getting full speed *from* you as well as *to* you, and also they typically provide more robust mail packages.
    Serving your own content from home is typically an expensive and extremely labor-intensive prospect, as you will almost certainly need to learn Linux/Unix as well as apache, and maybe also a robust FTP client and mail server. Serving from Windows XP or Vista is highly discouraged due to enormous security problems and downtime issues. Learning CGI, Perl and so forth is daunting at first and (if you're like me) you probably want to work on graphical content more than laboring over server duties and security details.
    Subscribing to an enterprise-class hosting service can provide you with a robust, professional-looking website with almost no knowledge of HTML, CSS, Perl, CGI or other technology, and most provide a wide array of "extras" like secure password-protected content for individual users, CGI bins, mail hosting, extensive arrays of scripts to use (such as blogs, forums, online updating, user statistics, traffic analyses, etc) and many also provide simple tools for setting up your site with easy-to-use templates and so forth. I have used 1-and-1 hosting and they provide excellent service with highly-rated uptime and security as well as a ton of tools and software for site building. Typical packages for decently rated monthly bandwidth can be had for around $10 to $20 a month which is a fantastic value, compared to spending upwards of $100 a month for hosting your own server and the countless hours of set-up and daily maintenance.
    Depending on the services you subscribe to with a provider, many probably have compatible systems for allowing you to publish directly to your website via common protocols and tools (using FTP or VPNs (virtual private network allowing for remotely mounted network drives)). You may need to do some research and homework, but the end result would be a very seamless work environment where you can share results with clients quickly and easily, and also allow them to comment, share notes and upload assetts for you to utilize if necessary.
    -Mark

  • Cutting out images in indesign, clipping path problems

    Hi,
    I have been putting images of my drawings from photoshop onto indesign for my portfolio,  after looking around the only way I can seem to find to cut them out is using clipping path/detect edges.
    The problem I have is because they are scanned sketches this method produces really inacurate and shoddy results and no matter how much I play around with the threshold and tollerance this means I still have to mess around with the pen and arrow tool for ages on each image.
    Is there a quicker solution to cutting them out like the magic wand or lasoo tool on indesign?
    It has taken days now in in design , I have all the images already cut out from their original pages on photoshop but the white box always comes around again when I drag or place the images in indesign.
    I have been shorcutting some pages and doing layout on photoshop and placing the image behind which works fine sometimes but is really inconviiant when I want to move the layout around text ot anything...... i have attatched some pictures to show you what I mean.
    Thanks for your help in advance
    Leo

    Well Thats 2 days of my life Ill never get back!
    Thankyou very much! cant belive I was that stupid

  • N95 in Emulator is Fine but N95 device has problem

    Hi all,
    I am creating a video based application for N95 which enable
    running video(.3gp) in normal to rotate(90 degree) and display in
    full mode so i tried it with Adobe Device Central's Emulator and it
    is working fine (Note: Emulator was update on 24th sept and adobe
    has released update on 22nd sept)
    but in actual device it is not working fine (means rotation
    is now happening) also i have updated N95's firmware from 21.0.016
    to 30.0.015. my N95 has flash lite 3.0 standalone player too but
    problem is same, kindly look at this..
    Device : N95 with 1GB
    Firmware : 30.0.015
    Flash Lite Player: 3.0
    OS: Symbian 9.2
    thanks
    Maneesh Panwar

    Hi Maneesh,
    Thanks for pointing this out, we'll look at it.
    Mark

  • N95 WLAN Connection problems - Orange Livebox (UK)

    I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

    hi,
    did you press "1" button at the back of the Livebox before pairing ?
    what kind of error message do you get on the N95 ?
    does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
    Cheers,

  • Overriding problems in life

    Well it's me again, having inheritance problems..
    I'm trying to override from one of the flexlib classes
    (ColoredScheduleEntry) and I notice that it's got two methods...
    override public function copy() : IScheduleEntry
    and
    override public function copyFrom(entry : IScheduleEntry) :
    void
    Now, I'm extending this class, and implementing
    IScheduleEntry but when I try to override the above functions, I
    get...
    "Method marked override must override another method" for
    both methods...which is kinda obvious, but there is a method that
    it's overriding from, and it's public too...
    Any ideas?
    Thanks

    Hi mac,
    did you mean this
    class
    ColoredScheduleEntry?
    The documentation and the code didn´t note any function
    copy or copyfrom. Are sure you that this is the right class ?
    kcell

  • N95 modem connection problem

    Hi everybody, I was wondering if there's anybody that can help me with my problem with my N95....I tried to use my N95 as a modem and connected it to my laptop to acces the internet via USB Cable, installed the latest PC Suite ver. 6.86.
    The installation and everything else were fine, I'm with T-Mobile USA and I have T-Zone package...launched PC Suite and hit "Connect to the Internet" button, at first it didn't connect successfully but after I changed the settings manually it successfully connected (I used wap.voicestream.com for the access point and leaving everything else blank) BUT when I tried to open Internet Explorer I get this error message:
    HTTP ERROR: $CODE$
    $MESSAGE$
    RequestURI=/
    Don't know what it means and how to fix it, I even created a new connection manually and it connected successfully but everytime I tried to open Internet explorer or goto any website I get that error...I'm using Windows XP SP2....I really need to get this to work as I'll be needing internet access while on the road...thanks in advance!

    Hi,
    the autogenerated modem has the setting
    at+cgdcont=,,"internet"
    the string you mentioned seems to be wrong, probably the "ip" must be before the "internet"... changing the string does not give any changes in the behaviour - still 234 bytes received...
    but then I changed the "internet" to "internet.t-d1.de" (because I am a customer of T-Mobile in Germany) -> and everything works fine!!!
    Thomas

  • N95-2 Battery Problem

    I have bought n95-2 8gb 2 weeks ago..
    I dont have problems about phone or applications but battery is horrible
    it always shows %100 charged. I got device status and it says %100 on phone and pc too. its always %100 for 8 9 hours and than it drops to %0 and phone turns off.
    is this a known bug? I got a new battery and its still the same problem what can I do and how can I correct this problem. any one having same problems?
    I saw 10 15 topics at other forums and they cant find any solutions...
    Please help me 8hours is not good

    worst nokia I have ever bought sold my sirocco for this **bleep**.. will sell this and will get a iphone
    got 4x battery from provider always the same never expected this kind of problem from nokia....

  • Erratic Clip Length Problems

    Hi all
    I am having REAL pains in the rear end with a project I am working on. For example, I will import a graphic file, allocate it a 5 second length, then place a 1 second transition either side, leaving the original clip with just 18 seconds left - as opposed to 3 seconds !!
    This is a problem I have had on previous versions and on different machines, but I would have thought that by now Apple would have solved this issue
    Does anyone have any insight into how to manage this, apart from throwing it all out of the window !!
    Many thanks

    Hi again eventproducer,
    There is a bug in iMovie 5.0.2 (and some earlier versions) which only affects PAL projects, but this was fixed in iMovie HD 6 (not sure which version). As I recall, the bug first appeared after iMovie 2.
    Transitions were rendered with an incorrect duration. For example, to achieve a rendered transition of 2 seconds duration, a setting of 1 second 17 frames had to be selected when choosing the transition. In essence, the rendered transition always appeared as a factor of 1.2 times the actual duration selected. See Matti Haveri's site:
    http://www.sjoki.uta.fi/~shmhav/iMovieHD_5_bugs.html#paltransitions
    If you are still using a version prior to iMovie 6, this explanation may cover part of the problem. Having said that, in your situation, using 1 second transitions on a 5 second clip shouldn't reduce the clip duration to only 0.8 seconds. Under the scenario I've outlined, the duration would reduce to 2 seconds and 15 frames. So, I'm not sure what's going on!
    Perhaps you could provide a fuller explanation as to how you are importing and rendering photos. For example, are you importing from the Photos pane within iMovie (ex iPhoto) or from a separate folder? Are you using Ken Burns to render, or is this feature switched off? Any extra information will be very helpful.
    Thanks
    John

  • Creating functions for movie-clips(serious problem)

    Hello,
    This is I think my third thread on these forums and in my
    previous threads I had always got some help.Well, now I have
    another serious problem, can you help me?
    I am unable to create a function that can control movie
    clips. Let me explain:-
    I have 10 movie clips on the stage and I have assigned them
    that whenever they crash to an object, they will go to a random
    position. Writing this code ten times for each movie clip would be
    very tedious, so, I thought about creating a function, but, it
    doesn't work. Here's the function, can you correct it?
    var object:movieClip;
    function position(object) {
    var testnum1:Number;
    testnum1 = random(290)+36;
    _root.object._y = -77.6;
    _root.object._x = testnum1;
    position(nameofmovieclip)
    PLEASE HELP IS REQUIRED!!!!
    Thanking All,
    Chinmaya

    Thanks for the reply,
    I tried that, it worked!
    But, now, I am encountering a really odd problem. This time
    I'll give you my full code.The problem is, that now when the object
    collides with another one, it changes its position according to the
    code but then after a while, it just passes through the object.
    Here's my code:-
    function position(object) {
    var testnum1:Number;
    testnum1 = random(290)+36;
    object._y = -77.6;
    object._x = testnum1;
    metal.onEnterFrame = function() {
    _root.metal._y += speednum;
    if (_root.metal.hitTest(_root.testline)) {
    position(_root.metal);
    speednum = random(6)+1;
    Can you help me out again,
    Thanks,
    Chinmaya
    P.S. I have tried to use the function like this:
    position(metal), but it doesn't work. And yes, I have already
    defines speednum somewhere before, so that isn't the
    problem.

  • [N95] Mail Configuration Problem

    Hi,
    Something had happened to me twice in the last two weeks with may N95's mailboxes, for some reason they disappear from my phone as they were deleted.
    I could be my fault, playing with Y-Browser or other apps, but as far as I recall I did not delete any file which I did not know its reason of being there.
    Do someone have this problem?
    Where are the mail files located?
    Thanks

    Any idea? help?
    06-Jul-200707:41 PM
    seti wrote:
    Hi,
    Something had happened to me twice in the last two weeks with may N95's mailboxes, for some reason they disappear from my phone as they were deleted.
    I could be my fault, playing with Y-Browser or other apps, but as far as I recall I did not delete any file which I did not know its reason of being there.
    Do someone have this problem?
    Where are the mail files located?
    Thanks

Maybe you are looking for