N95, date changes itself. latest fw v31.0.017

Hi.
I have alarm on my phone that goes on every work day at 05:20.
Week 4 it worked great mon, tue and wed.
On friday evening i ask my girlfriend if the alarm did go on today(fri) and yeasterday(thu), she couldnt remember.
Saturday morning the alarm goes on 05:20 i woked up turned it off and turned on coffee mashine.
Hmm, what the hell its saturday?!
So i thought that i somehow changed the date and time to some other day and changed it back.
Week 5, mon, tue, wed the alarm goes on as it should.
Thursday 29 january, time 05:35 i asked if she heard the alarm today? No she said.
I went into my calendar and what did i see, the date is set to 31 january 2009!!! but today its 29 january 2009.
I can bet that in 2 days on saturday the calendar is gonna change back to 29 january 2009 and the alarm is gonna wake me up on saturday morning.
Anyone else with this problem?
V 31.0.017
16-12-08
RM-159
N95 (03.01)

hi,
it works for E66, too. I've been testing for a couple of days.
There's another thing that doesn't work, though ...
When the alarm-clock starts, i have the option to <stop> , and then turn on/off the phone, or <delay>, which will make the phone silent for the moment; the alarm will start again in 5 minutes (5 minutes for me, i think this is a setting...).
This doesn't work . (doesn't work anymore; it used to, before the last software "downgrade" hrrr... )
If i choose <delay>, the phone will "shut-up", and then will never "speak" again ...
I wait, wait, wait... and then, when I turn it on manually (15 minutes later) -> it is then when it tells me I had an alarm 10 minutes ago, and the alarm really starts ringing ....
Anyone else noticed that?
I guess there is no workaround for that, is there ?
cheers,

Similar Messages

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

When I updated to the latest IOS last night, why did the photo events date change?

When I updated to the latest IOS last night, why did the photo events date change?

The problem is that the Add-ons Manager tab when opened the first time, is on "Get Add-ons" section and that must be downloaded from the Add-ons server which might be overburdened.
* If you need to look for new Add-ons, go directly to the Add-ons site -> https://addons.mozilla.org/en-US/firefox/
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Check for New versions of your Add-ons]]
Check and tell if its working.
Not related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Event Data Change step- Failure

Hi All,
I have a failure in event data change process in a process chain.
It has identified 2 packages for change.
One package has successfully been done.
While processing of second package, the job BCAST**** failed as logon to BW system with user ID specified failed.
I know that the user-id does not exist., but am not able to find out of where the to change the user id for the job BCAST*** to run successfull.
when i click displaying messages, it shows
Step 001 started (program RSPROCESS, variant &0000001212711, user ID BWEXTRACT)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job
BIBCAST4AN61630VW21F4LTLVP2QED68 with ID 08254800
The job BIBCAST4AN61630VW21F4LTLVP2QED68 failed as logon was not possible.
Please suggest

Hai ,
Its right you get the owner name in the table after changing the right user id there .
In broadcast setting screen itself say for EX broadcast email
below you give the recepient address
after that you have the Authorization user box where you can directly change to right id if you have the proper authorization attached to your user id .Remmember to save then schedule & execute when you trigger for first time.
This step is related to the role attached to your user access ask basis guy or instead of transporting from development do the broadcast setting directly in production with right EP access.
hope it would sove your issue.

Date change problem on 6110 Navigator

Hi,
On Sat morning I noticed my phone had not changed date and still showed Fridays date, yet the time was correct. I changed the date to Sat, and again on Sunday I noticed the same thing - still showed Saturdays date. On Monday and other days of the week the date changes correctly to the next day.
I tried setting the clock to 23h59 on Friday and watched the date change to Saturday correctly. I also tried this with the phone off and it was correct. Yet if I leave it to run its course there is a problem.
Can't find any help with this on the net and hoping someone else has experienced this and knows how to fix it. I have the latest firmware for this phone.

Mine is set to off and always has been. I don't know if my network actually broadcasts time / date for update anyway.
Either way the phone is OFF when the date change is supposed to happen so cannot get incorrect time from network.
I have also tested with the phone off. i.e. Set time to 23h59 on Friday, switched off phone and when I switched it back on again the date was correct. Don't know what the difference is between this and just leaving it to run as normal. Its all too weird.

Modification Date changes when updating Open With?!?!

Forgive me if this is mentioned elsewhere. I have been searching these forums and not seen this problem.
If I do a 'Get Info' on a file in the Finder and change the application it opens with, the Modification Date changes to 'now'. Why in the world would this happen? This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file. I am simply changing the OS's metadata about which app to use. This info isn't even stored in the file itself, as evidenced by burning such an document to a CD or moving it through a network server then opening it on a machine with different default apps for certain extensions.
Is this just another wacky step backwards in the world of the Apple OS X Finder, or am I missing a way to avoid this?
PowerMac G5 2.5DP Mac OS X (10.4.3)

This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file.
Actually, I am using "Panther" now, and can confirm that changing the application to be used to open an individual file through "Get Info" does in fact change the modification date.
When the "Change all" button is used, the modification date of other files of that type won't be affected by this change since that modification is presumably made somewhere in the "Launch Services" database to set the "default" application to be used for that file type. Perhaps this is what you were thinking of.
However, for that first file (or any file changed individually), the file is in fact modified, and the "Open with" information is stored with the file, in its "resource fork". Usually, a 'usro' resource (specifying the application) and an 'icns' resource (for the app's custom icon for that file type) are added. You can try this yourself - drag any image from Safari.app to the "Desktop" and open the info window for that image - such images usually don't have a "resource fork". Make note of the file's size, then change the "Open with" application. You should immediately see an increase in the file's size (to account for the addition of the "resource fork") accompanied by an update of the file's modification date to reflect this modification.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

Why did the date change to september 21 when it is realy august 21?!?!

I tried cropping a picture and suddenly my phone turned off then turned back on by itself. When it turned back on i noticed the date changed to september! Why did this happen? And how can i change back the date?

This has occured on my iPhone 4 16GB three times this morning. Once at 8:15a, then at 10:30a, and just now at 12:00p today (all times are Central).
Device: iPhone 4 16GB (MC318LL)
Carrier: AT&T
iOS Version: 5.1.1 (9B206)
Turning the phone off and on does not fix the problem. Could be an issue with the date/time info when queried from the carrier. All three times I was on 3G and had a weak signal. Once the date changed, 3G was lost and then went to 2G (EDGE) and then 3G was restored. I am wondering if it will happen at 2:00p also.

Date set itself to sunday december 31 2000

Hi,
I have the date set to automatically set itself but for some reason the date set itself to sunday december 31 2000.
I realize I can change it manually but I would like it to set itself automatically.
thanks,
Brandon

That means your PRAM battery is most likely dead. It maintains settings such as Time and Date.
Try posting this in the MacBookPro power and battery forum. I know Tower Mac battery info but am not well versed on portable Mac's PRAM batteries. I do know it is separate from your main battery.
DALE

Including an Event Data Change in a Process Chain

There is a step called "_Execution with Data Change in InfoProvider_" in the process of including event data change in a process chain.
How do we carryout this? should this be done in Bex or in process chain itself?

Dear Eshwari,
1) To get the 'Execution on data change' option, you need to have aprocess chain with the 'Event data
change' process type which contains 'the infoprovider' (The infoprovider, over which the query is created
which you are trying to broadcast) in the process variant of it.
2) Further more, additional authorization is also needed in order for the user to see such scheduling options in broadcaster.
Please assign this authorization object to the affected users.
BEx Broadcasting Authorization to Schedule S_RS_BCS
     Activity                       *
     Event ID in Broadcasting Frame *
     Event Type in Broadcasting Fra <== Here you should select*
     ID of a BI Reporting Object in *
     Type of BI Reporting Object in *
3) Please also ensure the user has not only the Busines Explorer role but also Business Intelligence role in Portal,
Regards,
Arvind

Data Change event triggering Process hangs in Process chain

HI Folks,
In a daily running Process chain we have a Data Change event triggering Process , to trigger broadcasting settings
This process is running for a long time , with no progress
in SM50 , there are 2 process
Process 1 : RSRD_BROADCAST_STARTER Status : OnHold Reason : SLEEP
Process 2 : SAPLRSRD_X_RUNTIME Status : OnHold Reason : RFC
I tried to change the Parallel Processing setting as Number of Processes = 1
But still the process is hanging.
Any inputs will be a great help.
Thanks
Sonal......
P.S : SAP_BW 700 0022 SAPKW70022 SAP NetWeaver BI 7.0 and EP 6.0
Edited by: Sonal Patel on Feb 2, 2010 1:47 PM

Hi sonal,
I would suggest you to uninstall all the components and start all new again, n please make sure you have the following order :-
1) install GUI 710 along with BEx 7.0 and 3.x complete.
2) install BW AddOn (bw350gui710_8-10004473.exe latest one from Service market Place).
3) Install BI AddOn (bi710sp11_1100-10004472.exe latest one from Service market Place).
4) Install SAP precalc server (xPreCalServer10_1-10004472.exe, latest one from Service market Place).
In service market place you can get the components from Downloads ->Support Packages and Patches -> Entry by Application Group -> "SAP Frontend Components"
Also, plz make sure that you restart your Server OS after each and every installation.
This would solve your problem.
Rgds,
Sreekul Nair

Why does my iPad 4 download data by itself?

When i did a reset of my iPad 4 with iOS 6.1 today, I noticed that it seems to download data by itself. When i go to the overview of my available memory it first says that about 400mb of data are used, and then it continuously goes up to currently 638mb without any changes or installing any apps. I have now reset it several times and every time it is the same issue.
Does anyone know what this is all about?

Hi Elissa,
Had a very similar issue try following the Apple 5 R's:
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/#section_1
I had this fix my issue - I know it says iPod but the procedure is the same
Failing try taking it back to an Apple Store or Apple repairer.

Help tells me that i am up to date with the latest version BUT the firefox start link tells me i am NOT on the latest version. what is going on?

help tells me that i am up to date with the latest version BUT the http://www.google.co.uk/firefox?client=firefox-a&rls=org.mozilla:en-GB:official link tells me i am NOT on the latest version. what is going on?.
also:
please can sync also copy my addons too?

Firefox is a web browser not a homepage.
It sounds like you you have the old www.google.com/firefox/ start page that used to be the default homepage in Firefox before Firefox 4.0 sometime. It is not being maintained by Google anymore so either ignore the message or while in Firefox go to Tools->Options->General->Homepage section and change your homepage.

ITunes volume changes itself / Can't Force Quit.

My iTunes volume changed itself to a third of the way up, and now I can't change it. If I move the volume slider it just automatically goes back to where it was. I also can't force quit iTunes! It even won't let me shut down because of it. Any ideas?

Open Activity Monitor in Application/Utilities. You can monitor your applications there to see how much CPU or real memory they are using. Selecting the CPU column will sort the highest on top for easy viewing. You can also force quit an application in Activity Monitor.
Another option to Force quit is to use the commands. Command-Option-Esc. This brings up a Force Quit window.
Since the symptoms affect many applications, I would first download and install the latest Apple combo updater. They install over the same version and will go back and refresh all files unlike an incremental updater that only adds new files. If the combo doesn't work, you might need to do an "Archive & Install".
Mac OS X 10.5.8 Combo Update (For both PowerPC- and Intel-based Macs )
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate

What makes an alias modified date change?

Anybody knows what can make an alias "modified" date change by itself?

Any modification of the file changes the Modified Date.

N95, date changes itself. latest fw v31.0.017

Similar Messages

Maybe you are looking for