N95 device driver conflict with windows Vista Home...

When I connect my N95 to laptop and check in device drivers it comes up with a problem against the N95 mobile phone with the following windows message. windows does not offer a solution to this message either.
Message reads:Windows has stopped this device because it has reported problems. (Code 43)
This may also be the cause of nokia software update not detecting the phone as connected, even though Nokia PC Suite does detect phone?
I am usig latest update for wondows Home premium, and Nokia PC Suite.Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.83.14.1
Language: English
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Microsoft Outlook:
Version 11.0
Build 8118
No supported Bluetooth stack found

I have exactly the same problem listed above. I have a n95 and a pc with vista home premium. I cannot sync though pc suite says the n95 is connected. No sync setting appear when I click that button. I cannot update the phone software as it doesn't recognise the phone is connected and the device driver is disabled. I had a 6300 installed so I uninstalled that and it made no difference.

Similar Messages

  • What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?

    What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?

    For the IQ700 series
    If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
    http://support.microsoft.com/kb/975163/ 
    If you're running Windows 7, install this patch
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
    And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • Cannot open iTunes 8 with Windows Vista Home Premium

    Hopefully someone here can help me with my problem. I have a new Ipod Touch that needs itunes 8 to work. I have a new HP PC with Windows Vista Home Premium. The problem I'm having is: itunes & quicktime will download successfully onto my computer, but after download will not open. I receive the error message "itunes has stopped working...A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". I have tried to open them from desktop & from programs ...will not work. I was using itunes 7 with no problems, but after upgrade to the new version (itunes 8) I started having this problem. Here are a few of the things I have tried so far with help from just about every tech support I could find: uninstall & reinstall itunes (tried this several times..didn't help, but itunes installs successfully each time)...try installing quicktime & itunes separately (didn't help)..disable firewall & virus protection (didn't help)...turn off Data Execution Prevention (DEP) (didn't help)...tried saving software to discs & installing itunes that way (didn't help)...I have updated all of my software including windows vista...I've run virus checks...& pretty much run checks on anything else I could find. I occasionally get the same error message when I try to open Rhapsody, but not every time. I'm thinking of using my backup discs & restoring my computer to factory settings. To do that would be a last resort, but I am getting pretty close to desperate. Does anyone think restoring it would help? If anyone has any ideas for me to try I would really appreciate it. Thanks so much.

    You need to to check to see if your Quicktime works normally. Itunes will not work if QUicktime doesn't.
    If Quicktime doesn't work, describe what happens with any error message in full.
    Go to your control panel and try to start QUicktime preferences. In XP you need to be in classic view to see it, I am not sure about Vista.
    Give the full text of any error message.
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar
    If so uninstall them, they are bad news for Quicktime.
    Report back with your results.
    If Quicktime is OK have you seen the Apple troubleshooting article for launch failure, I guess you have probably done quite a bit of it anyway, but is worth going through it systematically:
    http://support.apple.com/kb/TS1717

  • I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

    I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
    ITunes will be installed wrong or what should I do to activate these options?

    Go to the front page of the Store, and click Change Country.  Make sure it is set to the country where you actually are. 
    Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

  • Conflict With Windows Vista?

    Please help me. This is truly, truly awful.
    I got a new computer AMD Athlon 64x X2 Dual Core, 2.4GHz.
    It came with Windows Vista Home Premium.
    I installed Adobe Flash Professional 8.
    I have Windows XP at home and Flash 8 works just fine.
    On this computer, ANY movie clip I double-click on takes
    f..o..r..e..v..e..r to update the screen. Excruciatingly slow.
    If you notice when you double-click a movieclip Flash makes
    an animation of a dashed box zoom up from the clip to make it look
    as if you are zooming into the movie clip -- well I watch that
    dashed rectangle slowly, slowly expand till it fills the whole
    screen. Only then will Flash resume normally. It expands in slow
    chunky movements.
    Strangely enough, if I click on a movie clip in the library -
    no problems. It opens up almost immediately.
    I've tried this with new files, old files, sample files. All
    the same.
    Either Windows or Flash hates something about that 'zooming
    into a movie clip' animation. It hates backing out of them too. I
    get the dashed box when I go back to the main timeline as well.
    This is just devastating. There is no way I can use Flash
    like this.
    Any suggestions welcome.
    I've already shut down every background program I thought was
    interfering. I've already reinstalled. (The uninstall took a
    bizarrely long time to do its thing. Could I have a bad copy?) I've
    kept a processor meter running whilst the problem occurred and the
    processor isn't sweating it at all. So what's the problem!?
    I was tech support for years, but here I'm completely at a
    loss.
    And trying to google 'problems flash 8 slow opening movie
    clip' is obviously useless.
    *sob*

    there were a few lengthy threads about this a couple weeks
    ago - try searching - i cant remember the
    solution and i dont have vista.
    Chris Georgenes
    Animator
    http://www.mudbubble.com
    http://www.keyframer.com
    Adobe Community Expert
    *\^^/*
    (OO)
    <---->
    FreshLaundry wrote:
    > Please help me. This is truly, truly awful.
    >
    > I got a new computer AMD Athlon 64x X2 Dual Core,
    2.4GHz.
    > It came with Windows Vista Home Premium.
    > I installed Adobe Flash Professional 8.
    >
    > I have Windows XP at home and Flash 8 works just fine.
    >
    > On this computer, ANY movie clip I double-click on takes
    f..o..r..e..v..e..r
    > to update the screen. Excruciatingly slow.
    > If you notice when you double-click a movieclip Flash
    makes an animation of a
    > dashed box zoom up from the clip to make it look as if
    you are zooming into the
    > movie clip -- well I watch that dashed rectangle slowly,
    slowly expand till it
    > fills the whole screen. Only then will Flash resume
    normally. It expands in
    > slow chunky movements.
    >
    > Strangely enough, if I click on a movie clip in the
    library - no problems. It
    > opens up almost immediately.
    >
    > I've tried this with new files, old files, sample files.
    All the same.
    >
    > Either Windows or Flash hates something about that
    'zooming into a movie clip'
    > animation. It hates backing out of them too. I get the
    dashed box when I go
    > back to the main timeline as well.
    >
    > This is just devastating. There is no way I can use
    Flash like this.
    > Any suggestions welcome.
    >
    > I've already shut down every background program I
    thought was interfering.
    > I've already reinstalled. (The uninstall took a
    bizarrely long time to do its
    > thing. Could I have a bad copy?) I've kept a processor
    meter running whilst the
    > problem occurred and the processor isn't sweating it at
    all. So what's the
    > problem!?
    >
    > I was tech support for years, but here I'm completely at
    a loss.
    > And trying to google 'problems flash 8 slow opening
    movie clip' is obviously
    > useless.
    >
    > *sob*
    >
    >
    >

  • Compatibility with Windows Vista Home Basic?

    Does Fireworks work with Windows Vista Home Basic? Will it
    run on my OS?

    I have Vista Home Premium and Fireworks CS3 works fine with
    one exception. The bitmap editing tools are not compatible with
    Aero. Copying an answer I wrote two days ago...
    You can do one of two things. Turn off Aero completely or
    have Vista disable Aero only when Fireworks is running.
    For the latter,
    1) go to where Fireworks is installed, usually
    C:\Program Files\Adobe\Adobe Fireworks CS3
    2) Right-click on Fireworks.exe and select Properties
    3) Select the the Compatibility tab
    4) Under Compatability mode label, select the checkbox for
    Run this program in compatability mode for: and select Windows XP
    (Service Pack 2) from the drop down box.
    5) Under the Settings label, check Disable desktop
    composition
    6) Click OK.
    Now, when you start up Fireworks, your system will flicker as
    Aero is disabled, but your bitmap tools will work. When you close
    Fireworks, your system will flicker as Aero returns.
    See also, discussion
    in
    this thread
    The post on 09/13/2008 by lallsopp claims that desktop
    composition does not need to be disabled, but I find that my bitmap
    tools do not work properly unless I do. You can try it both ways
    and see what works for you.

  • Isight cam with windows vista home

    i hv installed windows vista home premium edition on my macbook(white) by using bootcamp2.0 & load all drivers by mac os disc1.
    iSight camera is shown in device manager but not in my computer.where is the problem.
    cam is working with yahoo messanger.i tried to update driver for iSight cam online thru internet,but it says driver is already updated.
    i hv updated all whatever update available on net(both for windows vista & apple software update).but problem is same.
    vista is showing problem as follows....
    Product
    Apple Built-in iSight
    Problem
    Could not load driver software
    Date
    1/4/2008 4:42 PM
    Status
    Not Reported
    Description
    Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10.
    Problem signature
    Problem Event Name: PnPDeviceProblemCode
    Architecture: x86
    Hardware Id: USB\VID05AC&PID_8503&REV_0188&MI00
    Setup class GUID: {6bdd1fc6-810f-11d0-bec7-08002be2092f}
    PnP problem code: 0000000A
    Driver name: usbvideo.sys
    Driver version: 6.0.6000.16386
    Driver date: 11-02-2006
    OS Version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    _*ANY ONE CAN HELP*_

    According to the spec sheet that system doesn't have Bluetooth.  It might have a Bluetooth entry in the Control Panel, but the hardware isn't installed.  That's why it can't find the phone.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Can't use iTunes with Windows Vista Home Premium

    I have deleted and reinstalled so many times, so i tried the compatibility settings and set it to work for Windows XP(Service Pack 2) with 256 colours. It works, but it messes up all my colours.
    Help, please.
    (My brother got iTunes working on his Windows Vista Home Premium laptop, but it won't work for the desktop computer.)

    i think the file name quicktime.msi is causing the problem
    also forgot to add that installation stops when the status turns to computing space requirements

  • Installing Flash Player with Windows Vista Home Premium

    I'm trying to install Flash Player on an older system running Windows Vista Home Premium. Do I need an older version of Flash Player?

    Actually, unlike Adobe Reader, Flash Player is officially supported on Vista: http://www.adobe.com/products/flashplayer/tech-specs.html

  • Nvidia GeoForce Go 7600 graphics driver and IQ770 with Windows Vista Home Premium 32 bit edition

    I have been having problems with my screen for several months now:  every so often, for no apparent reason, it loses some of the pixels.  I can still read the items on the screen, but the resolution is trashed.  It happens intermittently and then goes back to normal.  I have tried uninstalling the graphics driver and letting the computer go find it on a reboot.  This does not work.  I have also tried installing the original graphics driver.  This does not work either.
    If I look in the "Problem Reports" area in Control Panel, there is a graphics related error: 
    Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078)  The resolution listed is to reinstall the device driver (which I've tried dozens of times without success) or to change the computer's performance settings, which also does nothing.  I still get the occasional loss of screen clarity which returns to normal all by itself.
    Is anyone else seeing this problem?  Does anyone have a resolution?
    I have tried the latest graphics driver available on the hp website, from 8-2008 as well as the originally installed version from January 2007.  The version of Windows is Vista Home Premium 32 bit edition, Service Pack 1.
    If I completely uninstall the graphics driver, and do not reload any, the screen performance is fine, but then there are other problems, such as graphics acceleration.
    Thanks for your help.

    For the IQ700 series
    If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
    http://support.microsoft.com/kb/975163/ 
    If you're running Windows 7, install this patch
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
    And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

  • Zen Xtra 30G Works with Windows Vista Home Ba

    I am writing this to help anyone who has experienced this problem. I don't know if this fix will work for all of you, on other versions of Vista, or if you have other firmware installed will not work for you. Note, since Vista was released Microsoft or Creative could have sent them updated drivers without anyone knowing. I have had Vista Home Basic for year now.
    After some tweaking, the Windows XP drivers worked on Vista Home Basic.
    I then use Nomad Explorer meant for XP to manage the MP3 files on my Zen Xtra.
    Firmware .20.08 30G Zen Xtra
    No Playforsure installed
    Vista Home Basic
    User Account Control OFF
    Here were my steps:
    Connect your Xtra to the PC running Vista.
    When first connected to Vista without drivers installed, Vista attempts to find drivers, if it finds them you'll be golden, but as I know there are no such drivers, if not it should return unsuccessfully.
    Download the latest USB drivers and 2004 Nomad Explorer from Creative's website.
    Run all as administrator.
    Right click properties to set to run these programs in Windows XP Service Pack 2 emulation mode.
    Install the driver, it will hang and time out, and some drivers will be installed.
    Install Nomad Explorer, if enough drivers were installed it will finish installation.
    Unplug the Xtra.
    Reboot.
    After Vista is booted, plug in the Xtra. It will now cause the driver to load, with a bizarre off sized icon. It will view files but you cannot open or access files. Media Player will try to boot and bomb, it cannot access files nor downloaded them.
    Now boot Nomad Explorer. It runs through the Xtra drivers. It will work like XP but look like Vista.

    Hi i tried the 3 posible solutions with not good results:
    - The driver from nomadworld is the same, so it didn't work either
    JB3_PCWDRV_US__26_02.exe
    - I tried to disable my antivirus, but I still get the same error at the end of the installation:
    "An error occurred while setting up the driver"
    - I saw the last reply about the device manager, but there's no Zen on the device manager, i had seen when a device have a error because of the driver, but in this case it doesn't appear anything.
    I didn't understand which .inf I need to modify, could yopu explain me more? please.
    May be is related to this, because my drivers path is "C:\Archivos de programa\Creative\Jukebox 3 Drivers", probably there's some path hardcoded in the installer.

  • Crystal Report with Windows Vista Home Premium

    (Why I added Code and my paragraph becomes dis-order??)
    Dear all,
    This is my first post in this forum. So, if I put at wrong section, Mod please kindly move my thread.
    Here is what I'm facing now.
    I have an application which is coded in Visual Studio 2005 (VB.Net) using SQL Server Express 2005 edition. This project include report sections which I used Visual Studio built-in Crystal Report. (My development PC is running XP Pro edition)
    I already tested it in Windows XP Professional Edition (this is a clean OS no programming or other tools installed in it) and it worked well and it display the report accordingly and correctly.
    But when I tested it in Vista Home Premium, it got error and I can't run all reports. I juse ADO.Net connectivity to connect between Database and Crystal Report.
    Below is a sample which is provided by Crystal Report under my C:\program files\Microsoft Visual Studio 8\Crystal Reports\Samples\en\Code \ VB_Win_Data_DataSets. The way I connect is follow this project standard. Even the sample project got this error in Vista Home, I think it may be Vista problem or Crystal report problem. It will not my connection problem.
    Because my customer PC is running Vista Home Premium, now I'm in dead end. Kindly please tell me what should I do to solve this case.
    Thanks.
    Here is the error it pop up. (this is just a portion of the error. the others are "Loaded Assemblies" portion).
    System.Runtime.InteropServices.COMException (0x8002000B): Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
       at CrystalDecisions.ReportAppServer.DataDefModel.FieldsClass.get_Item(Int32 Index)
       at CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(Int32 index)
       at CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(String fieldName)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetParameterValue(String name, Object val)
       at VB_Win_Data_DataSets.Form1.ConfigureCrystalReports() in D:\TutorialSampleCodeProjects\VB_Win_Data_DataSets\VB_Win_Data_DataSets\Form1.vb:line 16
       at VB_Win_Data_DataSets.Form1.Form1_Load(Object sender, EventArgs e) in D:\TutorialSampleCodeProjects\VB_Win_Data_DataSets\VB_Win_Data_DataSets\Form1.vb:line 23
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Windows.Forms.Form.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Edited by: scsfdev on Jun 28, 2009 8:33 AM
    try to add error code. but my paragraph seems to disorder when I add
    blog. don't know why.

    Hi Ludek,
    Sorry, I was on vacation and didn't notice the email alert.
    I didn't deployed yet. Because I want to make sure it runs OK on vista, I didn't create a setup or deploy project in .Net.
    I just build and copy the entire bin folder and required data to Vista PC and test it.
    then it hits this error. (All other parts of my program is working well like CRUD data to DB.)
    (I did install this file "crredist2005_x86.msi" on Vista PC.)
    Thanks for all your support.
    I still didn't solve this case.
    What I do now is I change the way I connect to Server for all Crystal Reports.
    At first I use Dataset and map it to Server.
    Now I directly connect to it without pass through dataset. (Use OLEDB SQL Server.)
    But I still want to know how to solve this case.
    If anyone know it. Please share your idea and experience here.
    thanks.

  • Bluetooth Peripheral Device driver failure in Windows Vista

    I've linked my computer and my Palm Centro using a Bluetooth connection and now I keep getting an error message that says...
    "Device driver was not successfully installed...Bluetooth Peripheral Device - Failed"
    It tries to search the computer to find the driver and when it can't it asks me to put in the CD that came with the phone.  I do that and it still can't find the driver.
    Does anyone know where I can find this mystery driver???   Please help!!  Thanks
    Post relates to: Centro (Sprint)

    I am having the same problem with a new RocketFish Bluetooth adapter.  I did NOT have this problem when I was using a Kensington USB Bluetooth adapter.  One big difference that I notice between the two adapters is that the Kensington adapter came with an updated version of the Toshiba Bluetooth Stack software which contained its own DUN drivers.  However, the new RocketFish Bluetooth 2.0 EDR USB adapter does not seem to work with the Toshibal BT Stack.
    Maybe this helps.  Maybe it doesn't.  Either way, I don't care.  It's how I roll.  I'm a smart ass.
    I will check back for any additions to this thread.  I hope we can figure it out!  I will also post more Prose of Indifference.
    Post relates to: Centro (AT&T)

  • Tecra M5: Cannot clone on two screens, driver nvidia with windows vista doesn't work

    i has installed windows vista 32 bits, the bios updated and all the drivers from the toshiba oficial website, if i put a second screen the resolution of my lcd screen it's going to 1024X800 but in the external screen don't recieve signal.
    If i start the tecra with the external escreen connected only has signal in this, no signal in the lcd screen.
    please help me this notebook is for my boss
    thanks
    abel
    Message was edited by: abelbass

    Hi
    As far as I know the Tecra M5 was delivered either with the Intel or nVidia graphic card.
    On the notebooks with nVidia graphic card you can set different option in the nVidia Desktop manager; for example Enable multiple desktops
    You should find it in control panel.
    Unfortunately, I dont know exactly where the settings are placed in the nVidia manager because this notebook was delivered only with WinXP but Im sure you will find it.
    bye

Maybe you are looking for