N95 - display switches off

Hi, I have a problem with N95 display - when the lcd light is on, it works.... but as soon as the light goes off, the display switches off... so there is no screensaver with time and sms/missed calls icons... Even during a call, after a few seconds (exactly as I have set in settings to switch off light) the display switches off... Do you have any idea where could be the problem, please? The LCD was changed, so does there exist a possibility, it is a faulty LCD?

If the display is working ok when active, then there is unlikely to be anything wrong with it, check the settings in personalisation. Menu>tools>settings>general>personalisation>themes>power saver, and tick Date and time !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

When display switches off I can't get it back without forced restart

When display switches off due to low battery power & I can't get it back even when I plug in to the mains and have to force the PC to restart.
Is there a pref somewhere to disable this?

Hello
When the display goes off exactly? How much capacity has battery at this time? 5%? More?
Try to set this to higher level.
When you work with your notebook and battery level comes to low battery level and the alarm alert will be shown in task bar but you will be able to continue your work several minutes or to connect AC power supply.
I am afraid your notebook reaches critical battery level and then is maybe too late for any action.
Set Low battery level to 10% and when the notification is shown connect AC adapter immediately.
I presume the display must not be off at all.

N95 8gb switches off while taking a backup with co...

Hi All,
I have Nokia N95 8gb with FW 30.x. There is some problem when I try to backup my phone using the content copier on PC suite. The phone just switches off when it reaches the point of backing up device specific settings.
It shows a green tick for messages,calendar,notes,bookmarks etc. Then it fails at settings point. It successfully creates a backup files which is about 12 mb only. My previous backups have been in the region of 170+ mbs. So, something is definitely wrong here.
One other weird thing I notice when I bring up the 12 mb file for restoration, it only allows me to restore "user files from the phone memory". Even though it showed green tick for calendar,messages etc...it dont seem have been backed up.
I'm desperate to get this working. Any help will be appreciated.Thanks.
List of Nokia phones I've used: 3310, 3315, 3200, 6600,3250, N73 ME, N95 8GB, 5800 XpressMusic and Nokia X6 16 GB (currently using this).

well...strange as it may seem but I was finally able to take a backup of my phone. I could do it on another PC of mine running XP and having a very old version of PC suite - 6.83.X
I'm still not able to get it working on Pc suite 7.x and nokia ovi suite 1.1 on Vista
Message Edited by sid2109 on 27-Jan-2009 11:16 PM
List of Nokia phones I've used: 3310, 3315, 3200, 6600,3250, N73 ME, N95 8GB, 5800 XpressMusic and Nokia X6 16 GB (currently using this).

MSI GT60 display switches off itself

I have a msi GT60 dominator 870m .... when i am playing games i am always connected to my monitor and tv... sometimes after playing a little while suddenly both external monitors lose display and everything hangs ...... after 3 or 4 minutes it correctz itself .... i think my laptop is throttling or something .... i had my turbo boost on as well .... i noted the temp of GPU which was 90c ..... what can i do to prevent this ? This is so annoying when playing games like LOL, dota
looks like MSI does not play test or something .... what is the use of having GAMING laptop when it cant play GAMES ....
anyways do i need to repaste or something .... i don't want to lose my warranty
Hdmi port connects to my 24 inch monitor and mdp1 connects to my tv... my laptop display is off... tv and monitor are on duplicate mode ...
so when this issue happens laptop display switches on, tv and monitor loses display and everything is in a hanged state ... 3 minutes later ... both my tv and monitor switches back on and everything works again ..so this makes me think its switching from nvidia gpu to integrated gpu for some reason....
My vbios is latest as well 80.04.F7.00.06
nvidia version : 340.52
Intel : 10.18.10.3652.
Is there any fan control software or something

Quote
Hello,
First of all, in order to tell you if repasting will void your warranty, I have to know the country you live in.
I live in USA.
Quote
Temps are high, so that's the most likely the issue. LoL and Dota are not demanding games; can you please run Intel Burn Test (single pass) while recording temps (with HWInfo). If it passes, then run some GPU benchmark like Kombustor and monitor HWInfo temps too.
Did Intel burn test with standard and maximum both were successful, Max temps were 93c
Also ran Kombuster for 25 minutes, max temp was 94 c again no issues.
Quote
MSI can't test every single laptop that comes out of the production line, can they? At least brands that make condoms don't test every single that is made
Come on condoms come with an inherent risk and a warning that it has a chance to fail , also you are comparing a 1$ item with 1500$ product?
Quote
No fan control available for notebooks, sadly.
There is a custom software for old generation laptops, some fan control utility, which changes the fan speed profiles, not sure if we have one for the new generations.. motherboard is same as old so it may work for my laptop as well but i am not sure ... was hoping if i could increase the fan speed i could get the temps down.

Screen Sharing with connected display switched off

I have a 2009 Mac Mini connected to my TV using a minidvi > hdmi adaptor.
If the TV is turned off and I try to access the computer using Screen Sharing, I only ever get a blank screen.
If the TV is actually turned on then screen sharing works fine.
If i disconnect the DVI adapter then screen sharing works fine.
I would like to use Screen Sharing without having to turn on the TV or disconnect the minidvi>hdmi adaptor.
Is this possible?
Cheers Russell

It's kind of complicated, but the explanation would be something like this: a Mac relies on something called a Plug and Display driver in order to properly configure its graphic's output and send it to an attached display. The P&D driver is also referred to as EDID and you can read more about it on Wikipedia if you care to.
http://en.wikipedia.org/wiki/EDID
The VESA organization that controls the standard for EDID and DDC specifies that a host system, meaning the Mac in this case, be able to power the DDC channel and the display's EDID function even when power is turned off on the display. But not all manufacturers adhere to that part of the standard, especially true for some TVs. So when your TV is turned off, the DDC channel ceases to function and the Mac looses track of the TV and unfortunately sends no output in that case.
The little box I referenced in my earlier post will keep the DDC channel alive at all times so the Mac will always send video out regardless of the power state of the TV.

Satellite A200 - Display goes off for no reason

I've a Satellite A200-E530D running Windows Vista Home Premium. For the past month, i've had something strange happening to my computer, soon after boot up, the display goes off. for no good reason! the only option i have is to hard boot the system and everythings fine...though a couple of times after restarting it again went off.
I've tried updating to the latest display drivers (I have a Nvidia Geforce 7300 Go graphics with a 128 MB of VRAM)
Another strange thing, Vista SP1 doesn't install on my machine. tried uninstalling my Anti virus, but that hasnt helped either.
Can anybody shed some light on my dark display?

im hoping its not a failing inverter board. hardware support where i come from (India) costs a bomb, and for a laptop, its a hell of a lot more than a bomb.
i dont think its a failing inverter board though...shouldnt the board fail regularly while im using it then? the fact that my display switches off (and dude, it switches OFF completely, no backlight at all. my laptop responds only to a hard boot in the @$$) right after i switch on my computer points to a software malfunction. because, afterwards, my PC works just fine for the the next seven or eight hours that i use it for.
im guessing there something wrong with the way the drivers are loading up...or something.
maybe i should change the power options? i've configured the screen to switch off after a period of 1 min of no activity. and my laptops start up time (from the time i log in, to the time the little windows hourglass sign disappears) can be a little longer than a minute. is it possible that theres something wrong going on there?
like i said, im at my wits' end!

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Switching off Macmini without Display

One of the ways I would like to use my Macmini is with Windows XP Pro on Bootcamp controlled through Windows Remote Desktop without a display, keyboard and mouse connected. This all works perfect, but I have just one question left:
Is there a way to switch off the Macmini after use, without any display and keyboard connected?
Reason I would like to use the Macmini this way, because it is very nice and compact to mount it in a 19" rack.

Welcome to the Apple Discussions!
I am not sure that you will be happy with this type of performance. That is not a good way to use a Mac long term. There is usually too much lag, nor is it full screen.
You can power down a Mac mini by pressing and holding the power button, however this is not very good on the HDD. It can corrupt your directory and such quickly if you do this all of the time.
You can also configure the power button to sleep a Mac by pressing the button once and releasing it.
Dah•veed

Switch off imac internal display

Hello,
i bought an 24" external monitor yesterday. I want to use that external display only. How can i switch off the internal display of my imac?
Lowest brightness and a black desktopbackground are not very satisfying to me .
Thank you for any ideas.

Thank you Eric for your advice about the black desktop background.
But you have the opportunity to switch off the display on an apple mobile device. Why not on an imac? Just a few lines of source code
What will happen if i disconnect the lcd panel from logic board?

HT204380 My phone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime

My iPhone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime call. My OS version now 7.0.4. I think recent update actually to fix the above issue but still continues.

Similar issue Andrew. After installing 8.0, the IOS deleted 225 songs from one of my playlists, and I'm still "recalling" songs that are no longer in my Music Library. Fortunately, although the playlist of 235 had only 6 songs left on it ( on my Mac), the Playlist was not erased from my I -Phone. I was able to recreate the Playlist on my Mac, using the intact playlist on my phone. When I synched however, I was back to square one. I went to the Apple store, and I had to reset the phone . We also downloaded IOS 8.02. They saved my playlist in the Cloud, deleted it from my Mac, then synched it. Lo and behold, the playlist I recreated on my Mac, synched to my I Phone. After the reset, I had like 11GB of free space. (Its been 5 days since the "reset" and the number of GBs fluctuates from day to day !!)
When I got home from the Apple store I spent after hours reinstalling all the apps, synchng the phone to the Bluetooth in my car ( you know the rest of the saga) , I purchased a song from I Tunes. I "drag and dropped" it into a Playlist, and synched. Didn't work. Song shows in "Recently Added", but the drag and drop feature doesn't work. Bottom line, I'm not willing to "reset" my phone every time I add a song ! I've tried any number of fixes posted to this support community, but none have worked for me.
Furthermore, it took me 3 hours to get the phone re-synched to the Bluetooth system in my car. However every time I connect to "Bluetooth Audio", the system needs to "find" and "reconnect to" my phone. If you ( or anyone else ) finds something that might work for both the music synch and /or the Bluetooth, I'd appreciate your input.
Thanks, Lorenzo

Hi i jus hit the restore all button in my settings and my phone is getting a display signal of switching off and it lies in dat mode plz help me out

hi i jus hit the restore all button in my settings and my phone is getting a display signal of switching off and it lies in dat mode plz help me out

You need to perform a DFU Mode Restore of the iPhone with iTunes on computer. You must also have a SIM card of the original Carrier that this iPhone was produced for.

MMacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster

Hi ,
My MacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster as if the machine is running a heavy load.It displayed a question mark some time back then a friend borrwed it ,he flashed the system and put windows 7.Then a few days pasted and now it wont display as stated.I have tried to Reset SMC and the Command + P + R + Power but still no response.Please assist?
Regrads Josh

I think your "friend" caused a problem (or two).
I do not know what "flashed the system" means......
Based on what was done, I would probably erase the HD and restore the system from a backup before the software changes were made.
Barry

Why when my ipad is switched off does new email display onscreen even when I havent unlocked it?

Why when my new ipad air is switched off does new email display onscreen even when I hav'nt unlocked it. I dont really want anyone whose near my ipad being able to read my mail.

Show on lock screen>Off
Settings>Notification Center>Mail>Alert Style

During call switch off display to black screen

During call suddenly switch off display to black screen. Calling continues normaly , but is not possible finish this , I must switch off and on full iPhone...... And once one problem - I was think, so this is problem cohere with " Show My caller ID " in setting and now I see, so this function is OFF and is not possible switch ON..... Can you help me any ?

When you make a call or get a call, the screen is supposed to turn off when you bring it to your ear (it has proximity sensors that activate when on a call). It does this so your face doesn't touch the screen while active and push a button.
When you pull it away it is supposed to turn back on.
If it doesn't turn back on there are two possible causes. First case is those that buy and use a case for the phone. If you have a case, there is a good chance you are either using an older case (made for first gen iPhone) on a newer iPhone 3G or your case is just poorly designed. Either way, some cases have a habit of covering the sensor thus it cannot tell when you put the phone to your face or pull away.
If you have a cases (especially if an older case on a new iPhone 3G) remove it and see if the problem continues.
The other possible problem is just a bad sensor. So if you are not using a case and having this problem, take unit to an Apple Store for replacement.
My guess is that you are using a case that was made for the 1st Generation iPhone and not the new iPhone 3G (there is a difference...you cannot use an older case on the newer phones).
Message was edited by: DaVBMan

My ipad has been switched off since 2 week of no charging..now wen i kept charging it first displayed charging symbol then it became blank.after a whole day charging also its showing blank i holded home n sleep buttons even but not even logo appears.

Ipad mini has switched off and became blank.How to restart it?pls help me out

The type of battery that's in your iPad is quite resilient. However, letting that battery run down completely, and leaving it that way for a few weeks is a quick way of destroying it's useful service life. I suspect that you may need to have it replaced.

N95 - display switches off

Similar Messages

Maybe you are looking for