N95 Email sending problems

Hello,
I am having trouble sending emails from my n95 8GB. I have set up a gmail account trough IMAP and i can recive emails perfectly but when i try to send an email i get an error message saying
"Internet:
Server not found"
I have also tried this with my private work email, but i have the same problem.
Does anyone know how i can send emails? or have any specific settings. I have tried this with my home WLAN and Orange internet and Orange GPRS.
Thanks

Hi kallev
Are you on a "data tariff" with your network provider?
If you are NOT access to SMPT servers other than welho is probably blocked
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Wierd Email sending problem

    Hi,
    I used my email server, for example, "email.ZZZ.edu", to send email by the following code:
    Properties prop = System.getProperties();
    prop.put("mail.smtp.host","email.ZZZ.edu");
    Session session = Session.getDefaultInstance(prop, null);
    InternetAddress fromAddress = new InternetAddress(SendFrom);
    InternetAddress toAddress = new InternetAddress(SendTo);
    replyadd[0] = new InternetAddress(ReplyTo);
    MimeMessage emailmsg = new MimeMessage(session);
    emailmsg.setFrom(fromAddress);
    emailmsg.setRecipient(Message.RecipientType.TO, toAddress);
    emailmsg.setSentDate(new java.util.Date());
    emailmsg.setSubject(Subject);
    emailmsg.setText(EmailContent);
    Transport.send(emailmsg);
    When I send out an email to a person who is under the same email server, it works(e.g., from "[email protected]" to "[email protected]"). However, if I send to an email address that is not under the same server (e.g, from "[email protected]" to "[email protected]", I got the following error msg:
    >>>>>>>>>>>>>>>>>>>>>>>
    Email Sending Exception: javax.mail.SendFailedException: Sending failed;
    nested exception is:
         javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
         javax.mail.SendFailedException: 554 <[email protected]>: Recipient address rejected: Relay access denied
    So it seems sending to an outside address from my own email server doesn't work.
    However, on the contrary, if I send an email from [email protected] to my address "[email protected]" by using my email server "email.ZZZ.edu", it works. You see, this will cause security problem, that means, a person can send to me an email by using an forged email address.
    Does anybody knows how to solve the above two problems? Thanks in advance,
    Yihua

    What are you using for SMTP services? It looks like you have it setup to only relay messages to its own domain but accept messages for relaying from any where.
    I would talk to whoever setup the service to get it configured to relay messages anywhere but accept requests from your domain only. Your Java code looks fine and does work so I think you just need to get the environment setup right.
    Sean

  • N95 text sending problem

    Hi, my N95 wont send text messages, it just stopped all of a sudden, i contacted my provider and had a replacement handset sent out, restored it from a backup on my memory card and now the new one wont send texts.
    It'll send MMS's and everything else works just fine apart from the texts.
    Any suggestions, i'm thinking it's gonna be a setting or some software conflict somewhere, i've checked the message centre number etc, i'm on O2 uk contract.

    Sorry my mistake this is the most current thread for this problem unless anyone else has any useful solutions.
    NOKIA / O2 HELP! This is a serious problem! I have tried everything except the full reset as mentioned 2 posts up, please report after full reset if this BUG re-appears! cheers! I am relying on my trusty backup 6230i but its not good as I cant fully synch all my contacts over using latest PC suite! I shelled out raw cash for my N95! and only just got it insured luckily but its still not fully registerd, but this is happening AGAIN to O2 users who have had more than one N95 replacement and after firmware upgrades!
    Maybe it's a Sim update from O2 gone wrong as you get your new O2 settings sent to you after you change firmware right?.. well I did, sms center number and settings all fine. I dont seem to have any corrupt files.. cleaned all message folders and sim messages.. O2 said they'd phone me back but nothing.. OK Seperate Contacts Backup, Seperate DATA PICS MUSIC BACKUP.. full reset and pray my contacts restore ok.
    The only other change I made before this happened was I got
    a new 2GB Sandisc Micro SD Card that works in the phone but not in its caddy for the laptop? it maybe an XP thing..
    I have been unable to format MicroSD using panasonic tool from laptop isit possible through pc suite connection?
    I'm not giving up on my N95-1 its a classic like the Technics SL1200 turntable as far as I'm concerned. I'm running IRC Chat, Streaming Live Music, using Fring for Skype MSN AIM all at the same time! all on Wifi how lucky we are!! surfing the net, perfect phone call quality,
    I'm not ready to get an 8GB version yet not for another year. but no texting??!! NOOOO!!ok backup contacts reset, restore contacts, resume. DONT PANIC!
    N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

  • EMail sending problems with N95

    Hi!
    My internet operator here in Finland is called Welho and email addresses has the ending @welho.com. I can send email to these welho-addresses without any problems, but when I try to send email to other addresses I get an erros message saying that can not send the email. Phone just asks my user name and password dispate that the are already stored in the email settings in the phone and they are correct.
    So anyone else having same kind of problems? Solutions?

    Hi kallev
    Are you on a "data tariff" with your network provider?
    If you are NOT access to SMPT servers other than welho is probably blocked
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • N95 8gb email sending problem

    I have sucessfully setup my tiscali email on my phone.
    However for some reason I cannot send emails unless I am using my WiFi I have at home.
    Any ideas?
    Regards Matti
    Been a lover of Nokia since my 1st - a Nokia 101

    Go to Nokia support site & download other configurations for your phone.(3G,FPR etc).
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Godaddy email send problem

    I don't know if anyone else has had this problem but my godaddy email account cannot send emails from my iPad. I set it up the same way as my iphone and it think it worked initially but now, I've tried so many different variations of smtpout.secureserver.net. I called Godaddy's helpdesk and they told me to turn off SSL and use ports 80 or 25 or 3535. None of which has worked for me. Please help!

    Update: Problem solved.
    I'm not a techie by any means but I finally figured out the answer that somehow no one has posted before. I initially tried to setup my godaddy email on my ipad like the way it's setup on my iphone. I could receive emails but could not send. Because I have AT&T as my iphone provider, I have cwmx.com as my alternative outgoing mail server. That won't work with my ipad because emails from my ipad doesn't go through AT&T wireless. My home internet provider is Comcast. As an alternative SMPT server, I used Comcast's SMTP server: smtp.comcast.net. No user name, no password, SSL on, authentication password, server port 25.
    I found my ISP provider SMTP server info on this page: http://www.host45.com/resources/ispsmtps.php
    I think Apple can help future ipad users to better understand how email flows out of their devices and it really depends on your wifi/internet provider too.

  • Email Sending Problems in Bracknell Area?

    Running Win XP SP3  cable connected to with HH2 Type B on desk top and Win 8, 64 bit, on laptop via wireless link.
    There have not been any problems with email (PegasusMail) or web connection until the last couple of days.   I can download emails from both my ISPs - BT and 12FreeUK.   I can access the web without problems.   Trying to send an email I get a blue message window with protocol errors and a mail delivery failure message as below
    Delivery has failed on the enclosed message for the following
    reasons reported either by the mail delivery system on the mail
    relay host or by the local TCP/IP transport module:
       *** TCP/IP error while processing job ***
       A network error has occurred while WinPMail attempted to send
       your message. This error could be caused by many conditions,
       including the following:
         * The remote host may have gone down.
         * Your network may have been broken or gone down.
         * You may have a configuration problem in your WINSOCK.DLL.
         * If running on a SLIP line, you may have experienced a
           timeout (increase the value in WinPMail's Network Config.
           Dialog), or the phone line may have gone down or suffered
           from excessive line noise.
       WinPMail will requeue your message and try again later.
    Your original mail message follows:
    I see on BT site
    http://btbusiness.custhelp.com/app/service_status/
    that there are a large number of  failures round the country, over 25, plus failures in Brookhall, Slough and Brentwood.
    There appear to be no problems reported for Bracknell area 01344 exchange, but I cannot send messages.   Does anyone else have problems?
    Rodney Fry
    Solved!
    Go to Solution.

    Don't know what the problem was - BT network, exchange..??
    I have just tried again my Win XP and Win 98 standby and both machines will send emails!    Not tried the laptop, but I assume it will also be OK.  All very odd.
    Rodney

  • N95 email settings problem

    Hello,
    I have recently bought N95 and updated to recent version. But when i try to setup my email account, under both incoming and outgoing parts, i set my email port manualy. However when i go up and return to standby mode, enter again to the settings i see that the setting turns to default by itself.
    Gmail requires pop manual port setting so i cannot recieve or send emails with my phone.
    Is this a software bug? Any help?
    Thanks
    Gokcer

    using your n95 go to gmail.com/mobile there is a mobile application that delivers your email or search google for seven email which is a push email client

  • Outlook Email Send problems

    I have an email address on my website and I have used outlook express to view and send emails. 
    Recently I cannot send email any longer but instead receive the outlook error
    The connection to the server has failed. Account: 'mail.storksnmore.net', Server: 'mail.storksnmore.net', Protocol: SMTP, Port: 26, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
    A friend of mine also using Verizon (Fios) (I am using DSL) had the same problem but his error code is 0x80042109
    I called the company I have the website through and they informed me Verizon must be blocking my outgoing mail server -
    Anyone have an idea on a fix?

    This has been discussed on a number of threads here ... Verizon has started to block outbound SMTP (port 25) on residential user's machines (because it is one of the most frequently exploited vulnerability by malware and bots to unknowingly send SPAM to users).   This is consistent with efforts that many large ISP's are utilizing to help combat this problem.  
    What this means to you is that you can not use the standard SMTP port (port 25) to transmit data to a third party mail server for relay (which is essentially what you're mail client is doing).
    Most hosting providers are aware of this initiative and have enabled the usage of an "alternate SMTP" port for their clients to use to send outgoing messages.   The standard port defined for this is port 587, but there are a substantial number of providers which have also chosen to use port 26.   Some sites have chosen a different port entirely.  
    In your case, provided the domain you provided is correct, you are hosted by hostican.com -- a quick check of their knowledge base says that if you're using their VPS service, you can go into your control panel and enable outbound mail on an alternate port (they recommend port 26).   I could not find any indication for shared hosting customers on what their outbound port might be (and neither 26 or 587 works).   So, what you need to do is open a support ticket with your hosting provider and ask them what their "alternate SMTP port" is for customers whose ISP is blocking outbound SMTP on port 25.   Whatever port they tell you -- you should then go into your mail client config and replace the number "25" wherever you see it with the port number they provide.

  • Email sending problem

    I can send and receive emails using my BT email account (POP and SMTP connections fine), but suddenly can't send emails with hotmail (can't connect to hotmail SMTP server). I'm using a MAC running its MAIL programme that has worked happily for years. My wife has an identical problem with her hotmail account on a different MAC computer. Settings seem correct (port number, SMTP password authentification). Any ideas gratefully received.

    Spent two hours on the phone today with BT. They escaleted the problem to a specialist support desk, which we then had to agree to paying a £30 charge if they were able to fix the problem as they say that it is a problem with mac mail. (Which it isn't because it works fine using a different broadband connection, and we have three laptops in the house all with same problem, using outlook as well as mail).
    All three laptops have been working with out fault for the last four years and just before christmas they all stopped being able to send emails using hotmail. Obviously BT have changed something somewhere along the line.
    The Specialist just changed our outgoing mail server to use BTs instead. (I have been using a different SMTP server anyway as a temporary fix since christmas) Whilst we are able to send emails, we are still unable to connect to hotmails SMTP server. Still had to pay the £30 though. As far as they are concerned that still counts as a fix. Another "solution" they gave me was to change the DNS address in system preferences- Not Ideal as everytime you connect your laptop to a new network you will have to reset them.An absolute joke.
    Their direct number is 08000 321 118 if you need them to talk you through it. Best to have your bank card to hand.
    Livid.

  • Macbook air email sending problem

    I can recieve emails but not send them. I have checked all the settiings and even removed the account and re entered it but no joy. This has happend befor when I have been abroad but on my return home it has usually been ok but not this time - can anyone help please

    I have had this same problem. Has the wifi worked before? What I did was I turned my wifi off, then I restarted my computer, then I turned my wifi back on. If that doesnt work, leave the wifi off, and shut it down for a while. Hope I could help!

  • Email sending Problem:smtps---SSL---TLS??

    Hi,
    I Have a Problem bei Sending a email with Attachement from extranet, I have writting my Programm which will send my email Through TLS, with Thunderbird
    I can sending there alle emails through TLS, I have taking the seem Properties :
    emai Server Name, Protocol:smtp port:25 und througt TLS, so Now I will show you my Code und the compile Failure, I appreciate so much your Help, I don't find any Help here in Forum.
    My Code:
    public void sendAttachment(String ausgangsMailServer, String user, String password,String sender, String receiver, String filename) throws MessagingException{
              Properties properties = System.getProperties();          
              properties.put("mail.transport.protocol","smtps");
              properties.put("mail.smtps.ssl", "true");
              properties.put("mail.smtps.starttls.enable","true");
              properties.put("mail.smtps.auth", "true");
              properties.put("mail.smtps.debug", "true");
              properties.put("mail.smtps.socketFactory.port", "25");
              properties.put("mail.smtps.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
              properties.put("mail.smtps.socketFactory.fallback", "false");
    SecurityManager security = System.getSecurityManager();
              Session session = Session.getInstance(properties, new MailAuthenticator());                         
              Transport transport = session.getTransport("smtps");                    
              transport.connect(ausgangsMailServer, user, password);          
              Message message = getMessage(session, sender, receiver,filename);
              message.saveChanges();
              transport.sendMessage(message, message.getAllRecipients());          
              transport.close();
         public Message getMessage(Session session, String sender, String receiver, String filename) throws MessagingException{          
         Message message = new MimeMessage(session);                                                                                                                   
    message.setSubject("attachment");
         message.setFrom(new InternetAddress(sender));
         message.addRecipient(Message.RecipientType.TO, new InternetAddress(receiver));
         Multipart multipart = new MimeMultipart();
         BodyPart bp = new MimeBodyPart();
         bp.setText("Attachment Mail");
         multipart.addBodyPart(bp);
         bp = new MimeBodyPart();
         DataSource source = new FileDataSource(filename);
         bp.setDataHandler(new DataHandler(source));
         bp.setFileName(filename);     
         multipart.addBodyPart(bp);
         message.setContent(multipart);                              
         return message;
         public class MailAuthenticator extends Authenticator{
              public MailAuthenticator(){
              public PasswordAuthentication getPasswordAuthentication(){
                   return new PasswordAuthentication("radouane","mypaaword");
    And I call the methode sendAttachment in a EJB Methode I Use Jboss als Server in my web application.
    This is now my failure:
    05:07:21,382 INFO [STDOUT] javax.mail.NoSuchProviderException: smtps
    05:07:21,382 INFO [STDOUT] at javax.mail.Session.getService(Session.java:76
    4)
    05:07:21,382 INFO [STDOUT] at javax.mail.Session.getTransport(Session.java:
    689)
    05:07:21,382 INFO [STDOUT] at javax.mail.Session.getTransport(Session.java:
    632)
    05:07:21,382 INFO [STDOUT] at javax.mail.Session.getTransport(Session.java:
    612)
    I have Using a smtps protocol , by using smtp I Had this Failure:
    14:15:11,164 INFO [STDOUT] javax.mail.MessagingException: Exception reading res
    ponse;
    nested exception is:
    javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connecti
    on?
    14:15:11,164 INFO [STDOUT] at com.sun.mail.smtp.SMTPTransport.readServerRes
    ponse(SMTPTransport.java:1090)
    14:15:11,164 INFO [STDOUT] at com.sun.mail.smtp.SMTPTransport.openServer(SM
    TPTransport.java:986)
    14:15:11,164 INFO [STDOUT] at com.sun.mail.smtp.SMTPTransport.protocolConne
    ct(SMTPTransport.java:197)
    14:15:11,164 INFO [STDOUT] at javax.mail.Service.connect(Service.java:233)
    14:15:11,164 INFO [STDOUT] at javax.mail.Service.connect(Service.java:134)
    For your help I say Thanks.
    Radouane

    Hi,
    I want just writtefor you my javamail debug Infomationen by J2SE Application and bei J2EE application. By j2se was that sending successful, by j2ee application is a problem by TSL.
    Hier Debug for j2se application:
    DEBUG: setDebug: JavaMail version 1.4ea
    DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsys
    tems, Inc]
    DEBUG SMTP: useEhlo true, useAuth true
    DEBUG SMTP: useEhlo true, useAuth true
    DEBUG SMTP: trying to connect to host "mail.cs.tu-berlin.de", port 25, isSSL false
    220 mailhost.cs.tu-berlin.de ESMTP Postfix
    DEBUG SMTP: connected to host "mail.cs.tu-berlin.de", port: 25
    EHLO meknes
    250-mailhost.cs.tu-berlin.de
    250-PIPELINING
    250-SIZE
    250-VRFY
    250-ETRN
    250-STARTTLS
    250-ENHANCEDSTATUSCODES
    250 8BITMIME
    DEBUG SMTP: Found extension "PIPELINING", arg ""
    DEBUG SMTP: Found extension "SIZE", arg ""
    DEBUG SMTP: Found extension "VRFY", arg ""
    DEBUG SMTP: Found extension "ETRN", arg ""
    DEBUG SMTP: Found extension "STARTTLS", arg ""
    DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
    DEBUG SMTP: Found extension "8BITMIME", arg ""
    STARTTLS
    220 2.0.0 Ready to start TLS
    EHLO meknes
    250-mailhost.cs.tu-berlin.de
    250-PIPELINING
    250-SIZE
    250-VRFY
    250-ETRN
    250-AUTH PLAIN LOGIN
    250-ENHANCEDSTATUSCODES
    250 8BITMIME
    DEBUG SMTP: Found extension "PIPELINING", arg ""
    DEBUG SMTP: Found extension "SIZE", arg ""
    DEBUG SMTP: Found extension "VRFY", arg ""
    DEBUG SMTP: Found extension "ETRN", arg ""
    DEBUG SMTP: Found extension "AUTH", arg "PLAIN LOGIN"
    DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
    DEBUG SMTP: Found extension "8BITMIME", arg ""
    DEBUG SMTP: Attempt to authenticate
    AUTH LOGIN
    334 oioohbzfavsa7
    mnhgvas8799800U=
    30987hasabhsasa6
    Y2hiijsasisas=
    235 2.0.0 Authentication successful
    DEBUG SMTP: use8bit false
    MAIL FROM:<[email protected]>
    250 2.1.0 Ok
    RCPT TO:<[email protected]>
    250 2.1.5 Ok
    DEBUG SMTP: Verified Addresses
    DEBUG SMTP: [email protected]
    DATA
    354 End data with <CR><LF>.<CR><LF>
    From: [email protected]
    To: [email protected]
    Message-ID: <9971081.01168741860633.JavaMail.radouane@meknes>
    Subject: attachment
    MIME-Version: 1.0
    Content-Type: multipart/mixed;
    boundary="----=_Part_0_25199001.1168741860423"
    ------=_Part_0_25199001.1168741860423
    Content-Type: text/plain; charset=us-ascii
    Content-Transfer-Encoding: 7bit
    Attachment Mail
    ------=_Part_0_25199001.1168741860423
    Content-Type: application/octet-stream; name=filename
    Content-Transfer-Encoding: 7bit
    Content-Disposition: attachment; filename=filename
    Now by J2ee application---I use jboss:
    2007-01-14 03:27:28,769 INFO [STDOUT] DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
    2007-01-14 03:27:28,769 INFO [STDOUT] DEBUG SMTP: useEhlo true, useAuth true
    2007-01-14 03:27:28,769 INFO [STDOUT] DEBUG SMTP: trying to connect to host "mail.cs.tu-berlin.de", port 25
    2007-01-14 03:27:28,909 INFO [STDOUT] 220 mailhost.cs.tu-berlin.de ESMTP Postfix
    2007-01-14 03:27:28,909 INFO [STDOUT] DEBUG SMTP: connected to host "mail.cs.tu-berlin.de", port: 25
    2007-01-14 03:27:28,909 INFO [STDOUT] EHLO meknes
    2007-01-14 03:27:28,979 INFO [STDOUT] 250-mailhost.cs.tu-berlin.de
    250-PIPELINING
    250-SIZE
    250-VRFY
    250-ETRN
    250-STARTTLS
    250-ENHANCEDSTATUSCODES
    250 8BITMIME
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "PIPELINING", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "SIZE", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "VRFY", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "ETRN", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "STARTTLS", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: Found extension "8BITMIME", arg ""
    2007-01-14 03:27:28,979 INFO [STDOUT] DEBUG SMTP: use8bit false
    2007-01-14 03:27:28,979 INFO [STDOUT] MAIL FROM:<[email protected]>
    2007-01-14 03:27:29,049 INFO [STDOUT] 250 2.1.0 Ok
    2007-01-14 03:27:29,049 INFO [STDOUT] RCPT TO:<[email protected]>
    2007-01-14 03:27:29,159 INFO [STDOUT] 554 5.7.1 <[email protected]>: Recipient address rejected: Access denied
    2007-01-14 03:27:29,159 INFO [STDOUT] DEBUG SMTP: Invalid Addresses
    2007-01-14 03:27:29,159 INFO [STDOUT] DEBUG SMTP: [email protected]
    2007-01-14 03:27:29,159 INFO [STDOUT] DEBUG SMTP: Sending failed because of invalid destination addresses
    2007-01-14 03:27:29,159 INFO [STDOUT] RSET
    2007-01-14 03:27:29,229 INFO [STDOUT] 250 2.0.0 Ok
    2007-01-14 03:27:29,229 INFO [STDOUT] QUIT
    2007-01-14 03:27:29,229 INFO [STDOUT] Error Sending:
    2007-01-14 03:27:29,229 INFO [STDOUT] Sending failed;
    nested exception is:
         class javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
         class javax.mail.SendFailedException: 554 5.7.1 <[email protected]>: Recipient address rejected: Access denied
    2007-01-14 03:27:29,229 INFO [STDOUT] java.lang.NullPointerException
    can someone tell me, where is my problem by j2ee application, it's a ejb class -using jboss-.
    Thanks ,
    Radouane
    Message was edited by:
    radouane.marjani

  • EMAIL SENDING PROBLEMS

    Recently just upgraded to Window 7/0utlook 2007....set up email with Verizon support and everything went well...until now...can receive messages but cannot send them.....as I am on vacation and not in the US...cannot call Verizon...anyone know what the problem may be?

    You will need to change the port that is being used.  Make sure your outgoing server is set use authentication.  See the link below.
    http://www22.verizon.com/residentialhelp/highspeed/general+support/top+questions/questionsone/124274...

  • N97 mini Virgin POP email - sending problems

    I can't get my N97 to send email. It's on the Virgin network. My email account is provided by lcn.com.
    Settings
    SMTP post.lcn.com
    POP pop.lcn.com
    Username Full email
    address Password The password for the mailbox
    Anyone got any ideas?

    I did, but still no joy.
    I'm really annoyed that it was all working fine before the firmware update.
    The problem seems to be related to the fact that I use a domain name, and not my ntlworld.com email address.
    I will go back to nokia,com and try again just in case.

  • IPad Retina email sending problems.

    My new iPad Retina has developed a problem with sending very simple emails. The emails are just text and have no attachments. This now takes up to 10 minutes to send. Very frustrating and time consuming. Please help
    Thank you

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for

  • 13" Macbook Pro Network Card- Bootcamp users please help!

    Does anybody know precisely the model of the Ethernet card in the New 13" inch macbook pros? I am currently running Vmware and windows fundamentals- it's missing the drivers so i can't connect to the internet....

  • Pdf form imported to be Interactive in WDA?

    Hello WDA Group,    I have a .pdf file that was created in Netweaver Dev Studio. The XML file is also available. Is it possible to somehow put this somewhere.... possibly in a MIME folder for a specific WDA, then import and use it as an Adobe Interac

  • Idl2java -I option problems

    Hi, I have a problem when I am extending an IDL of package1 from another IDL which is in package2. I am using Visibroker in my application. code snippet: //under directory myDir/package1 - file name: idl1Module.idl #include <idl2.idl> module idl1Modu

  • Populating values in dropdown fields on interactive adobe forms.

    Hi, In HCM Forms & Process, I have populated dropdown fields using generic service. But today I came to know we can also populate the dropdown field values using webdynpro lookup tables. First question, Is that a wrong method to populate the dropdown

  • Javascript: 'has no properties' error

    Stumped by javascript once again. Can anyone see why I'm getting a 'mybuton has no properties' error in this script: javascript: var mybutton = document.getElementById('lnkBtn_delete'); var oldonclickfunction = mybutton.onClick; //old postback method