N95 gets restart automatically while video recordi...

Whenever I try to record video more than 4-5 min, my N95 gets restarted automatically while recording and doesnt even save the video. But when I record smaller video say 1-2 min everything is fine. I have Phone from O2 germany and Nokia website says that I have latest software version installed.
Please help me to fix this problem.
thank you

I have reboot problems as well. I haven't had the chance to try long video but it will reboot on almost any application.
As soon as the battery load is too high (it does get warm). I think it has to do with not being able to supply the current draw so the voltage drops and the phone reboots.
For me it was Maps that caused the reboot, or if I'm in maps and I get a phone call it would reboot. I could even get it to reboot when I was scrolling through the contact list non-stop.
See my post for more info. /discussions/board/message?board.id=smartphones&thread.id=102019

Similar Messages

  • No sound while video recording on N500!

    Hello! I just bought Lenovo 3000 N500 for my sister who is in Germany...I want to check everything on laptop, because I want her to use it to skype me...Everything is lovely, except I can't get sound while video recording...Is it possible this laptop has a webcam, but no integrated microphone? But  when I  go and use windows sound recorder that comes with Vista it records audio...But I can't get video to work with audio recording in the same time...Anybody there with a solution? Thank you , people!

    Same problem. Here's my solution:
    For now i record video using an app calle "Video FX Live". It records sounds clearly. Native iphone app still doesnt records any sound.
    So this proves the sound issues during video recording or facetime IS an IOS BUG.

  • Turn off the vibration or message notification automatically during video recording.

    Please add on mechanism to turn off the vibration or mute the message notification automatically during video recording, due to the motor vibration sound always reocrd into the video.

     You could set your phone to silent  http://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490 It's not ideal but it does the trick.  I agree with you, I wish we had an option that if an app/game it's on immersive mode, like while using the camera, we had an option to deactivate the notifications popping and/or the notifications without having to set the phone to silent.  

  • HT4623 does ios 7 allow iPhone 4s to take simultaneous photos while video recording ?

    i have iPhone 4s. i want to know if i can click photos while video recording . will this feature be added in iOS 7 for iPhone 4s or is there an app for this ?

    iOS 6 currently only offers this feature to iPhone 5 & iPod Touch 5th gen so it is a hardware limitation of the 4s & will not be addressed in a software update.

  • BPEL instance getting restarted automatically

    Hi All,
    The BPEL instance is getting restarted automatically for every 10 minutes.
    Below is the error found in the log.
    Any help will be appareciated..
    <2010-08-27 18:15:43,486> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initialized connection factory jdbc/BPELServerDataSourceWorkflow
    <2010-08-27 18:15:43,486> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initialized connection factory jdbc/BPELServerDataSource
    10/08/27 18:15:43 System.getProperty(dehydration.store)=null
    <2010-08-27 18:15:44,044> <INFO> <collaxa> <ServerManager::__init> Detected datasource 'oracle'
    <2010-08-27 18:15:44,061> <INFO> <collaxa> <gsServerSchemaManager::validateCompatibility> Detected database version '2.0.4'
    <2010-08-27 18:15:44,062> <INFO> <collaxa> <ServerAdaptorManager::init> Initialized adaptors for platform 'ias_10g'
    10/08/27 18:15:45
    GMS: address is 10.90.188.91:11326
    -------------------------------------------------------

    Hi,
    Could some one please help me.
    I suppose it could be of a below property?
    Could some one please explain what this is all about?
    <web-app application="jamagent" name="jamagent" load-on-startup="true" root="/jamagent" ohs-routing="false" />

  • Lenovo Vibe Z2 Pro getting restart automatically.

    Hi
    I am using Lenovo Vibe Z2 pro and i have observed from last couple of week this phone gets restart automatically and then it's shows one sign in the top up of the screen, this sign is with the phone and red bubble in the secure icon.
    Can anybody help me to understand and fix this problem ?
    Thanks

    The phone is DSDS(Dual Sim/Dual Standby) not DSFA(Dual Sim/Full active).
    ''If one of your SIMs are in use, the other SIM will automatically be put on hold.'' Put on hold=not available
    ''Could you tell me how i can disable the secure zone ?'' It would be better to put that question HERE.
    Hope this helps.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Which file gets created automatically while migrating

    Which file gets created automatically while migrating from non-ASM files to ASM diskgroup by using RMAN?----No.113
    A. the contol file
    B. the alert log file
    C. the parameter file
    D. the server parameter file
    E. the archive redo log file
    Message was edited by:
    frank.qian

    Reviewing the steps in Documentation provided below:
    Oracle® Database Backup and Recovery Advanced User's Guide
    Migrating a Database into ASM
    http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmasm001.htm#i1016547
    None of the choices are correct.

  • Which file gets created automatically while migrating from---QNo.113

    Which file gets created automatically while migrating from non-ASM files to ASM diskgroup by using RMAN?
    A. the contol file
    B. the alert log file
    C. the parameter file
    D. the server parameter file
    E. the archive redo log file

    Check this out
    http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10734/rcmasm.htm

  • Cancelled messages getting restarted automatically

    Hi all,
        I am facing one issue in pi 7.0, we cancelled some messages in sxi_monitor, but after cancellation also these messages are getting restarted automatically. please help me to solve these issue.
    Regards
    Pradeep P N

    Hi Raja
    Yes we configured restart of failed messages, but after cancelling the messages i think it won't get restart automatically. if i am wrong please correct me.
    Rgds
    Pradeep P N

  • My iPhone 4 getting off automatically while battery 60% or more and turn on when i plug in please advice it is battery problem or hardware i use this mobile for 2 years and 3 month.

    My iPhone 4 getting off automatically while battery 60% or more and turn on when i plug in please advice it is battery problem or hardware i use this mobile for 2 years and 3 month.
    Thanking you.

    1.  you may have to take it in to Apple and get an out of warranty iphone for $199.
    2.  you can get your information from a backup of your phone.  you do have a backup of your phone right either in iTunes or icloud.  If you don't then your answer will be no.

  • CF 5 server getting restarted automatically.

    Hi
    In one my production servers we have ColdFsuion 5. From the
    last week , its automatically getting restarted.
    I have observed the Server logs i found this issue. due to
    this all my users are getting frustated, as they are missing the
    data in the middle.
    Ex:
    "Information","1","02/20/08","11:03:32",,"The ColdFusion
    Application Server started."
    "Information","1","02/20/08","12:09:32",,"The ColdFusion
    Application Server started."
    how to overcome this? In what scenarios this issue will
    happen?
    could any one have an idea on this.
    Srinivas

    Hi
    Check the Heap size. SAP Note:Note 723909
    hope this helps
    Rgards
    -madhu

  • How to pause while video recording on iphone6 ?

    How to pause when video recording on iPhone 6?

    Hello sbonasoro,
    Welcome to the Apple Support Communities!
    I understand that you would like to pause video while recording on your iPhone. You cannot pause a video recording and pick it back up where you left off, but you can stop the video and start a new one when you would like to continue filming. Please refer to the attached iPhone iOS 8 User Guide for further information (page 94).
    Shoot some video. Choose Video, then tap the Record Video button or press either volume button to start and stop recording. Video records at 30 fps (frames per second). With iPhone 6 or iPhone 6 Plus, you can switch it to 60 fps in Settings > Photos & Camera.
    Snap a still while recording: (iPhone 5 or later) Tap the white Take Picture button in the lower-left corner. 
    Have a great day,
    Joe

  • Zoom while video recording (bug) - Video flickers back and forth on playback

    Using iphone 5s iOS 7.0.2
    If i zoom slowly during video recording, when playback the video, during the period i zoomed in or out, it just flickers back and forth (in and out). which ruins all the video.

    I just tried it on my iPhone.  Same specs.  No issues.  I'm assuming you're doing playback on your phone?
    - JC

  • App pool is getting stopped automatically while running the web service created by publishing Orchestration

    Hi All,
      I have created a Biztalk application and published that as Web service. I created a App pool and assigned that as an Identity for the newly created virtual directory.
     For the App pool I have set up the identity with a specific user id and add that user id under the Group IIS_USERS. 
    When I am browsing the web service I am getting Service Unavailable(HTTP Error 503) and App pool is getting stopped automatically.
    I checked in the event viewer getting the following error:
    Application pool WSOrchPool has been disabled. Windows Process Activation Service (WAS) did not create a worker process to serve the application pool because the application pool identity is invalid.
    I am sure that user id and password is correct. the same user-id is added in all the Biztalk server groups.
    Please let me know what can be the issue.
    Thanks & Regards,
    Joy

    Hi Joy,
    You need to ensure that the application pool identity is set to a valid account for the application pool to function.
    Step by step explanation can be found at
    Event ID 5057 — IIS Application Pool Availability
    You can also refer similar thread as well at Use Domain Account as App Pool Identity
    Rachit 
    Please mark as answer or vote as helpful if my reply does

  • Nokia asha 302 restarts while video recording

    Nokia asha 302 restarts when I record a video...
    i also did factory reset bt the problm occurs again...
    HELP...

    hi mate,
    have you also checked that you are up to date with the latest firmware by checking via Nokia Suite on PC?

Maybe you are looking for

  • Windows 7 keeps crashing on brand new PC...

    I just purchased a brand new HP MS214 all-in-one PC three days ago, and Windows 7 keeps locking up and restarting.  Mind you, this is a brand new computer.  Here is the exact info that's in the report upon rebooting: Problem signature:   Problem Even

  • MRBR - Price Variance

    Hi All, I have created one purchase order and did invoice also and is already paid. But in MRBR tcode , this document is blocked under price variance. Please let me know why it is blocked due to price variance as invoice is already paid. Do the needf

  • Preview show bad character size

    Preview is showing bad font size(to big) in some PDF (no special font). the same PDF was allright in leopard and is good with acrobat. You can see attached picture. Any idea why ?

  • Drop First Schema Provisioned from workspace

    Hi, I have htmldb 1.6 (will upgrade soon :)) I am not able to delete the First Schema Provisioned. I go in schema to workspace assignment and I do not see the delete button. How can I change the First Schema Provisioned for a workspace ? If I go in t

  • Need PPts on SD,FI,RMCA

    Hi all, Im an abap consultant I need to work on SD, FI, RMCA modules for a project...So It would be great If any of u can send me good ppts are documents which are easy to understand to my mail id: [email protected] Looking forward to hear from Thank